Water quality monitoring by nanostructured films in a sensing unit system

Presented here is a study about the capability of a sensing unit to detect changes in river water quality. In order to determine its accuracy, water quality was monitored at 11 points along the Veado River in Presidente Prudente, Brazil. To have a basis for comparison, a water quality index (WQI) was developed following methods previously applied in different watersheds. Results showed an accurate relationship between WQI and electric impedance readings detected by the sensing unit. Principal components analysis (PCA) was used to derive results in a form that can be correlated with WQI calculated for each sample point, which showed the potential application of this device.

The energy efficiency of chilled beam systems in an office building at different climates

Besides the sustaining of healthy and comfortable indoor climate, the air conditioning system should also achieve for energy efficiency. The target indoor climate can be ob-tained with different systems; this study focuses on comparing the energy efficiency of different air conditioning room unit systems in different climates. The calculations are made with dynamic energy simulation software IDA ICE by comparing the indoor cli-mate and energy consumption of an office building with different systems in different climates. The aim of the study is to compare the energy efficiency of chilled beam systems to other common systems: variable air volume, fan coil and radiant ceiling systems. Besides the annual energy consumption also the sustainability of target indoor climate is compared between the simulations. Another aim is to provide conclusions to be used in the product development of the chilled beam systems’ energy efficiency. The adaptable chilled beam system and the radiant ceiling system prove to be energy efficient independent of the climate. The challenge of reliable comparison is that other systems are not able to reach the target indoor climate as well as the others. The complex calculation environment of the simulation software, made assumptions and excluding of the financial aspects complicate comparing the big picture. The results show that the development of the chilled beam systems should concentrate on energy efficient night heating, flexible demand based ventilation and capacity control and possibilities on integrating the best practices with other systems. 

Predicting pre-triage waiting time in a maternity emergency room through data mining

An unsuitable patient flow as well as prolonged waiting lists in the emergency room of a maternity unit, regarding gynecology and obstetrics care, can affect the mother and child’s health, leading to adverse events and consequences regarding their safety and satisfaction. Predicting the patients’ waiting time in the emergency room is a means to avoid this problem. This study aims to predict the pre-triage waiting time in the emergency care of gynecology and obstetrics of Centro Materno Infantil do Norte (CMIN), the maternal and perinatal care unit of Centro Hospitalar of Oporto, situated in the north of Portugal. Data mining techniques were induced using information collected from the information systems and technologies available in CMIN. The models developed presented good results reaching accuracy and specificity values of approximately 74% and 94%, respectively. Additionally, the number of patients and triage professionals working in the emergency room, as well as some temporal variables were identified as direct enhancers to the pre-triage waiting time. The imp lementation of the attained knowledge in the decision support system and business intelligence platform, deployed in CMIN, leads to the optimization of the patient flow through the emergency room and improving the quality of services.

Release Process Effectiveness - Case of Operating Room Management Software

Työn päätavoitteena oli tuoda esiin tärkeimmät julkistamisprosessin tehokkuuteen vaikuttavat tekijät. Tutkimuksessa tarkasteltiin aihetta julkistamisprojektien vetäjän näkökulmasta. Kirjallinen selvitys kattaa keskeisimmät ohjelmistoprosessin, palvelun laadun sekä projektihallinnan teoriat. Kokeellisena aineistona käytettiin asiakkailta ja myynnin sekä käyttöönoton organisaatioilta tullutta palautetta ja asiantuntijahaastatteluita. Case-tuotteena tarkasteltiin suuren kansainvälisen yrityksen jälleenmyymää leikkaussalihallinnan ohjelmistoa. Tärkeimpiä julkistamisprosessin tehokkuuteen vaikuttavia tekijöitä ovat tiekartan ja julkistamispakettien sisällön hallinta, projektin aikataulujen pitäminen, rehellinen ja nopea kommunikaatio myyntikanavaan ja asiakkaille, sekä hyvin toteutettu testaus. Työssä käydään läpi esimerkkistrategioita kehittymiseen näillä alueilla.

Fuzzy expert system in the prediction of neonatal resuscitation

In view of the importance of anticipating the occurrence of critical situations in medicine, we propose the use of a fuzzy expert system to predict the need for advanced neonatal resuscitation efforts in the delivery room. This system relates the maternal medical, obstetric and neonatal characteristics to the clinical conditions of the newborn, providing a risk measurement of need of advanced neonatal resuscitation measures. It is structured as a fuzzy composition developed on the basis of the subjective perception of danger of nine neonatologists facing 61 antenatal and intrapartum clinical situations which provide a degree of association with the risk of occurrence of perinatal asphyxia. The resulting relational matrix describes the association between clinical factors and risk of perinatal asphyxia. Analyzing the inputs of the presence or absence of all 61 clinical factors, the system returns the rate of risk of perinatal asphyxia as output. A prospectively collected series of 304 cases of perinatal care was analyzed to ascertain system performance. The fuzzy expert system presented a sensitivity of 76.5% and specificity of 94.8% in the identification of the need for advanced neonatal resuscitation measures, considering a cut-off value of 5 on a scale ranging from 0 to 10. The area under the receiver operating characteristic curve was 0.93. The identification of risk situations plays an important role in the planning of health care. These preliminary results encourage us to develop further studies and to refine this model, which is intended to implement an auxiliary system able to help health care staff to make decisions in perinatal care.

Timetable database restructuring

Heriot-Watt University uses a software package called Syllabus Plus for its timetabling. This package can perform scheduling functions however it is currently employed only as a room booking system at present. In academic session 2008-2009 the university will be restructuring its academic year from 3 terms of 10 weeks to semesters of 14 weeks and therefore major changes will be required to the timetabling information. This project has two functions, both with practical and relevant applications to the timetabling of the university. The aims of the project are the ability to change population number of modules and activities, delete term 3 modules and activities, the ability to change module and activity name, and change the teaching week pattern from the semester

A Business Incubator, Accelerator, or Coworking Space? Case Health Innovation Village at GE

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.

Institutional Repositories: New Horizon of Science & Technology Knowledge Transactions

Today higher education system and R&D in science & Technology has undergone tremendous changes from the traditional class room learning system and scholarly communication. Huge volume of Academic output and scientific communications are coming in electronic format. Knowledge management is a key challenge in the current century .Due to the advancement of ICT, Open access movement, Scholarly communications, Institutional repositories, ontology, semantic web, web 2.0 etc has revolutionized knowledge transactions and knowledge management in the field of science & technology. Today higher education has moved into a stage where competitive advantage is gained not just through access of infonnation but more importantly from new Knowledge creations.This paper examines the role of institutional repository in knowledge transactions in current scenario of Higher education.

Einfluss der Einzeldosisblisterverpackung von festen Oralia auf die Arzneimitteltherapiesicherheit, Information und Zufriedenheit stationär behandelter Patienten in einer prospektiven, multizentrischen Studie

Bei der vorliegenden Studie wurde die Machbarkeit und Qualität der Arzneimittelverteilung von oralen Arzneimitteln in Einzeldosisblisterverpackungen je abgeteilte Arzneiform (EVA) untersucht.rnDie Studie wurde als offene, vergleichende, prospektive und multizentrische Patientenstudie durchgeführt. Als Studienmedikation standen Diovan®, CoDiovan® und Amlodipin in der EVA-Verpackung zur Verfügung. Die Verteilfehlerrate in der EVA- und Kontroll-Gruppe stellte den primären Zielparameter dar. Das Patientenwissen, die Patientenzufriedenheit und die Praktikabilität des EVA-Systems, sowie die Zufriedenheit der Pflegekräfte wurden mithilfe von Fragebogen evaluiert. Insgesamt wurden 2070 gültige Tablettenvergaben bei 332 Patienten in sechs verschiedenen Krankenhäusern geprüft. Es wurde in der EVA-Gruppe ein Verteilungsfehler von 1,8% und in der Kontroll-Gruppe von 0,7% ermittelt. Bei den Patienten-Fragebogen konnten insgesamt 292 Fragebogen ausgewertet werden. Die Ergebnisse zeigten einen ungenügenden Informationsstand der Patienten über ihre aktuellen, oralen Arzneimittel. In den 80 ausgefüllten Pflegekräfte-Fragebogen gaben über 80% an, dass Fehler beim Richten durch das EVA-System besser erkannt werden können. rnZusammenfassend kann gesagt werden, dass die erhöhte Fehlerrate in der EVA-Gruppe im Vergleich zur Kontroll-Gruppe durch mehrere Störfaktoren bedingt wurde. Grundsätzlich konnte eine sehr positive Resonanz auf das EVA-System bei den Patienten und den Pflegekräften beobachtet werden. rn

Diseño acústico de una sala multifunción mediante empleo de paneles móviles

El objetivo de este trabajo es el diseño acústico de una sala multifuncional. Los aspectos tratados en el mismo son todos los relacionados con el acondicionamiento acústico de un recinto sin el empleo de refuerzo sonoro. Tras describir brevemente las necesidades concretas de cada tipo de sala según el espectáculo al que está destinada, el presente documento muestra un ejemplo de diseño adaptable para este tipo de salas: - Sala de conferencias / Aula - Teatro - Teatro de ópera - Sala de conciertos de cámara - Sala de conciertos orquestales Para conseguir la adaptación necesaria, se ha diseñado un sistema de paneles móviles con el fin de adaptar la forma y el volumen de la sala. Dicho sistema trata de ajustar, dentro de lo posible, las características de la misma a las deseadas para conseguir una sala de calidad en cada uno de los ámbitos anteriormente mencionados. Todo el proceso de diseño se ha basado en la simulación por ordenador de diversos modelos que representan en cada caso la disposición final de la sala, una vez adaptada al espectáculo que se desee representar. Dicha simulación se ha realizado mediante el programa Odeon, obteniendo de ella una serie de resultados fiables y auralizaciones que demuestran la calidad de la sala diseñada. SUMMARY. The goal of this work is the acoustic design of a multifunctional room. The aspects covered in it are all associated with the acoustic treatment of a room without the employment of sound reinforcement. After describing briefly the specific needs of each type of room according to the show that is destined, this paper shows a design example customizable for this type of rooms: - Conference room / Aula - Theatre - Opera House - Chamber Concert Hall -Orchestral Concert Hall To achieve the necessary adjustment, a system of movable panels has been designed in order to adapt the shape and volume of the room. Such system comes to adjust, as far as possible, room features to obtain the desired quality room in each area mentioned above. The entire design process was based on computer simulations of various models representing in each case the final disposition of the room, once adapted to the show you want to represent. This simulation has been deployed under Odeon software, obtaining a group of reliable results and auralisations that demonstrate the quality of the room designed.

Avaliação da judicialização da saúde no município de Ribeirão Preto/SP

A Constituição Federal Brasileira institucionalizou o direito a saúde no Brasil, o artigo 196 que diz: A saúde é um direito de todos e um dever do Estado apresenta esse direito. Ao regulamentar a criação do Sistema Único de Saúde a lei 8.080 reafirma a obrigação do Estado com a Saúde da população. Dentro desse contexto a Assistência Farmacêutica (AF) tem importante papel de garantir medicamentos seguros, eficácias, em tempo e quantidade necessária para atender a demanda dos cidadãos, porém apesar das constantes atualizações em prol de promover maior eficiência dos processos da AF, ainda acontecem situações em que o paciente não tem o medicamento requerido, seja por falta nas unidades dispensadoras ou a não presença nas listas de medicamentos padronizados. Essa situação faz com que o cidadão recorra à via judicial na tentativa de garantir o acesso ao medicamento pleiteado, fenômeno conhecido como judicialização da saúde, que traz grandes implicações sobre a gestão da assistência farmacêutica. Diante disso o objetivo do trabalho foi descrever o panorama geral das ações judiciais pleiteando medicamentos e insumos para insulina que foram assumidos pela prefeitura de Ribeirão Preto. Para alcançar esses objetivos, foi realizado um estudo do tipo descritivo. Foram analisados ao todo 1861 processos judiciais sendo 1083 ainda ativos e 778 que já haviam sido encerrados. Na maioria dos processos o juiz dava como prazo máximo 30 dias (99%) para se cumprir a ação, o que é insuficiente para realizar uma licitação pública obrigando a gestão a utilizar via paralela de compra. O Ministério Público foi o principal representante legal (71,7%) utilizado e a maioria das prescrições foram advindas de hospitais e clínicas particulares (50,1%). Os principais diagnósticos referidos nas ações foram diabetes e o transtorno de déficit de atenção e hiperatividade (TDAH). Já os medicamentos mais prevalentes foram as insulinas e o metilfenidato. Dentre os médicos prescritores 3% somam aproximadamente 30% das prescrições. Diante dos resultados expostos, o presente estudo evidenciou o impacto da judicialização da saúde no município de Ribeirão Preto, demandando da gestão pública organização estrutural e financeira para lidar com as demandas judiciais.

Contributions to 3D Data Registration and Representation

Nowadays, new computers generation provides a high performance that enables to build computationally expensive computer vision applications applied to mobile robotics. Building a map of the environment is a common task of a robot and is an essential part to allow the robots to move through these environments. Traditionally, mobile robots used a combination of several sensors from different technologies. Lasers, sonars and contact sensors have been typically used in any mobile robotic architecture, however color cameras are an important sensor due to we want the robots to use the same information that humans to sense and move through the different environments. Color cameras are cheap and flexible but a lot of work need to be done to give robots enough visual understanding of the scenes. Computer vision algorithms are computational complex problems but nowadays robots have access to different and powerful architectures that can be used for mobile robotics purposes. The advent of low-cost RGB-D sensors like Microsoft Kinect which provide 3D colored point clouds at high frame rates made the computer vision even more relevant in the mobile robotics field. The combination of visual and 3D data allows the systems to use both computer vision and 3D processing and therefore to be aware of more details of the surrounding environment. The research described in this thesis was motivated by the need of scene mapping. Being aware of the surrounding environment is a key feature in many mobile robotics applications from simple robotic navigation to complex surveillance applications. In addition, the acquisition of a 3D model of the scenes is useful in many areas as video games scene modeling where well-known places are reconstructed and added to game systems or advertising where once you get the 3D model of one room the system can add furniture pieces using augmented reality techniques. In this thesis we perform an experimental study of the state-of-the-art registration methods to find which one fits better to our scene mapping purposes. Different methods are tested and analyzed on different scene distributions of visual and geometry appearance. In addition, this thesis proposes two methods for 3d data compression and representation of 3D maps. Our 3D representation proposal is based on the use of Growing Neural Gas (GNG) method. This Self-Organizing Maps (SOMs) has been successfully used for clustering, pattern recognition and topology representation of various kind of data. Until now, Self-Organizing Maps have been primarily computed offline and their application in 3D data has mainly focused on free noise models without considering time constraints. Self-organising neural models have the ability to provide a good representation of the input space. In particular, the Growing Neural Gas (GNG) is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation. However, this type of learning is time consuming, specially for high-dimensional input data. Since real applications often work under time constraints, it is necessary to adapt the learning process in order to complete it in a predefined time. This thesis proposes a hardware implementation leveraging the computing power of modern GPUs which takes advantage of a new paradigm coined as General-Purpose Computing on Graphics Processing Units (GPGPU). Our proposed geometrical 3D compression method seeks to reduce the 3D information using plane detection as basic structure to compress the data. This is due to our target environments are man-made and therefore there are a lot of points that belong to a plane surface. Our proposed method is able to get good compression results in those man-made scenarios. The detected and compressed planes can be also used in other applications as surface reconstruction or plane-based registration algorithms. Finally, we have also demonstrated the goodness of the GPU technologies getting a high performance implementation of a CAD/CAM common technique called Virtual Digitizing.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.

Food insecurity of HIV/AIDS patients at a unit of outpatient healthcare system in Brasilia, Federal District, Brazil

INTRODUCTION: Food security remains to be one of the world's biggest problems and is found to be related to HIV/AIDS. The objective was to examine food insecurity in HIV/AIDS patients from Brasilia, Brazil. METHODS: Short version of the Food Security Scale was applied to patients with HIV/AIDS. RESULTS: A total of 103 patients participated (65 HIV+ and 38 with AIDS). Food insecurity was found in 33.8% of HIV+ patients and 36.8% of patients with AIDS. A relation between food insecurity and low educational and social levels was established. CONCLUSIONS: Food security should be an important component in HIV/AIDS treatment programs.