Ensaios geomecânicos em rochas metassedimentares do maciço da Mina das Aveleiras (Mosteiro de Tibães): comparação, potencialidades e limitações

Mestrado em Engenharia Geotécnica e Geoambiente

Química mineral e estimativas de pressão e temperatura em rochas metassedimentares do grupo araxá na região de morrinhos, sul do estado de goiás

In the Morrinhos region, Goiás state, Brazil, the rocks of the Araxá Group have mineral assemblages related to the metamorphic peak which occurred in this region and is typical of the amphibolite facies (kyanite zone). These rocks are associated with the initial stage of the main ductile deformation that occurred in this area. Thermobarometric calculations, including the associations, garnet + plagioclase + biotite + muscovite; garnet + plagioclase +biotite + muscovite + kyanite; garnet + plagioclase + biotite + muscovite + amphibole, with quartz in excess, indicate that the metamorphic peak occurred at temperatures of approximately 610°C and pressures in the order of 10 kbar. The P-T path is probably clockwise and is in agreement with the tectonic conditions observed in collisional settings.

Proveniência das rochas metassedimentares do Cinturão Araguaia com base em datações Pb-Pb em zircão e idades-modelo Sm-Nd

Este trabalho apresenta dados geocronológicos ²⁰⁷Pb/²⁰⁶Pb de grãos detríticos de zircão obtidos pelo método de evaporação de chumbo e idades-modelo Sm-Nd (T_DM) de rochas metassedimentares do Cinturão Araguaia, e discute as possíveis áreas-fonte dessas rochas, buscando investigar a história evolutiva deste cinturão no contexto da amalgamação do Gondwana. As datações em grãos detríticos de zircão de quartzitos da Formação Morro do Campo apontaram idades arqueanas (3,0-2,65 Ga) para o domínio norte (região de Xambioá) e, para o domínio sul (região de Paraíso do Tocantins), revelaram idades meso-neoproterozoicas (1,25-0,85 Ga) e, secundariamente, paleoproterozoicas (1,85-1,70 Ga), sugerindo a existência de áreas fontes distintas para os dois domínios. As idades-modelo Sm-Nd (T_DM) obtidas em metapelitos (ardósias, filitos, micaxistos) dos grupos Estrondo e Tocantins apresentaram distribuição bimodal com maior frequência de idades entre 2,1 e 1,4 Ga, com moda entre 1,7 e 1,6 Ga, e outras menos frequentes entre 2,7 e 2,4 Ga, sugerindo mistura de fontes de idade Paleoproterozoica (ou até Arqueana) com fontes mais jovens, provavelmente do Meso-Neoproterozoico. Os principais candidatos a fonte para as rochas do Cinturão Araguaia seriam os segmentos crustais situados a sudeste (Cráton São Francisco, Maciço de Goiás e Arco Magmático de Goiás). Toda a sucessão de rochas sedimentares da bacia oceânica Araguaia e rochas magmáticas associadas a estes segmentos foram transportados, posteriormente, em direção à margem oriental do Cráton Amazônico, durante a tectônica principal de estruturação do Cinturão Araguaia, resultante da amalgamação do supercontinente Gondwana.

Estudo do metamorfismo de rochas de alto grau do grupo Araxá na região de São Sebastião do Paraíso - MG

This study focuses on metasedimentary rocks from the Passos Nappe in São Sebastião do Paraíso, southern Minas Gerais, Brazil. These rocks belong to the Internal Domain (Araxa Group) of the Southern Brasilia Belt, a Neproterozoic orogenic belt associated to the formation of the Gondwana Supercontinent. Rocks from the studied area are characterized by an inverted metamorphic gradient. Previously calculated metamorphic conditions show an increasing from geenschist facies at the base (450°C, 6 kbar), to upper amphibolite facies (750°C, 11 Kbar) at the top of the sequence. However, most of these estimates are based on Fe-Mg exchange thermometers and peak temperatures may be underestimated due to Fe-Mg exchange from cooling after peak metamorphism. In this study, we present new PT results for these rocks, based on metamorphic mineral assemblage LA-ICP-MS analyses. In the studied area, rocks from the top of the sequence have a typical granulite facies mineral assemblage: Grt+Ky+Kfs+/-Pl+liq. These rocks lack muscovite and have only minor amounts of Ti-rich, dark brown biotite. In a simplified NaKFMASH system the stability field for this mineral assemblage is bounded by the reactions Sil = Ky on the low pressure side, Ms+Ab = Ky+Kfs+liq on the low temperature side and for high-Mg bulk compositions Bt + Grt = Opx + Ky + liq on the high-temperature side. Minimum temperatures (considering post-peak reequilibration) of ca. 750°C are obtained by Fe/(Fe+Mg) values of 0.7 in garnets from a Grt+Ky+Kfs bearing sample. LA-ICP-MS results obtained for three samples show that rutiles included in garnets have up to 1847 ppm of Zr, which would translate into temperatures up to 830°C for a pressure between 12 to 15 kbar. Also for retroeclogite sample, the results indicate the contents of Zr in the garnet 537 ppm at a temperature of 708 ° C. It is noteworthy that several occurrences of retroeclogites occur in the upper part of the sequence and pressures...

Rochas calciossilicáticas e feldspáticas na região de Castro Alves e Rafael Jambeiro (BA)

The towns of Castro Alves and Rafael Jambeiro, central-east of Bahia state, are located in the east of São Francisco Craton, in granulite terrains of Salvador-Curaçá Belt, formed in Paleoproterozoic. The region of study contains ortognaisses of Caraíba Complex, metamafic and metaultramafic rocks of São José do Jacuípe Suite, metasedimentary rocks of Tanque Novo-Ipirá Complex, granitoids, pegmatites and alkaline rocks. The study carried out regional and detailed geological mapping in addition to petrographical and geochemical characterization of six areas in the search for targets of feldspar and white diopside, minerals used in ceramic industry. The areas consist of granitic ortognaisses interspersed with lenses of mafic granulite rocks, calc-silicate rock, banded iron formations, paragnaisses, quartzites, and bodies of quartz-feldspar or feldspar pegmatites and alkaline rocks that fill discontinuities. The region of study contains four deformations phases, with a predominance of ductile structures. The foliation Sn has N30E to N70W direction, high angle of dip and is characterized by compositional banding of granoblastic and felsic bands interspersed with nematoblastic or lepidoblastic mafic bands. A mineral or stretching lineation Ln is associated with Sn and has trend of S55E to S72E. The rocks have been suffered a regional metamorphism with granulite facies peak and partial retrogression to greenschist facies. Geochemical studies indicate that the green coloring calc-silicate rocks have lower SiO2, MgO and higher Fe2O3 content compared with white calcssilicate rocks. The alkaline rocks of the studied area have higher Na2O, SiO2 and lower K2O, Fe2O3 content compared with others Paleoproterozoic alkaline rocks of Bahia state. The targets of diopside are associated with white calc-silicate rocks, while the targets of feldspar are associated with paragnaisses, pegmatites and alkaline rocks

Modelos de condutividade térmica em rochas silicáticas, com ênfase em rochas da província Borborema, NE do Brasil

A practical approach to estimate rock thermal conductivities is to use rock models based just on the observed or expected rock mineral content. In this study, we evaluate the performances of the Krischer and Esdorn (KE), Hashin and Shtrikman (HS), classic Maxwell (CM), Maxwell-Wiener (MW), and geometric mean (GM) models in reproducing the measures of thermal conductivity of crystalline rocks.We used 1,105 samples of igneous and metamorphic rocks collected in outcroppings of the Borborema Province, Northeastern Brazil. Both thermal conductivity and petrographic modal analysis (percent volumes of quartz, K-feldspar, plagioclase, and sum of mafic minerals) were done. We divided the rocks into two groups: (a) igneous and ortho-derived (or meta-igneous) rocks and (b) metasedimentary rocks. The group of igneous and ortho-derived rocks (939 samples) covers most the lithologies de_ned in the Streckeisen diagram, with higher concentrations in the fields of granite, granodiorite, and tonalite. In the group of metasedimentary rocks (166 samples), it were sampled representative lithologies, usually of low to medium metamorphic grade. We treat the problem of reproducing the measured values of rock conductivity as an inverse problem where, besides the conductivity measurements, the volume fractions of the constituent minerals are known and the effective conductivities of the constituent minerals and model parameters are unknown. The key idea was to identify the model (and its associated estimates of effective mineral conductivities and parameters) that better reproduces the measures of rock conductivity. We evaluate the model performances by the quantity  that is equal to the percentage of number of rock samples which estimated conductivities honor the measured conductivities within the tolerance of 15%. In general, for all models, the performances were quite inferior for the metasedimentary rocks (34% <  < 65%) as compared with the igneous and ortho-derived rocks (51% <  < 70%). For igneous and ortho-derived rocks, all model performances were very similar ( = 70%), except the GM-model that presented a poor performance (51% <  < 65%); the KE and HS-models ( = 70%) were slightly superior than the CM and MW-models ( = 67%). The quartz content is the dominant factor in explaining the rock conductivity for igneous and ortho-derived rocks; in particular, using the MW-model the solution is in practice vi UFRN/CCET– Dissertação de mestrado the series association of the quartz content. On the other hand, for metasedimentary rocks, model performances were different and the performance of the KEmodel ( = 65%) was quite superior than the HS ( = 53%), CM (34% <  < 42%), MW ( = 40%), and GM (35% <  < 42%). The estimated effective mineral conductivities are stable for perturbations both in the rock conductivity measures and in the quartz volume fraction. The fact that the metasedimentary rocks are richer in platy-minerals explains partially the poor model performances, because both the high thermal anisotropy of biotite (one of the most common platy-mineral) and the difficulty in obtaining polished surfaces for measurement coupling when platyminerals are present. Independently of the rock type, both very low and very high values of rock conductivities are hardly explained by rock models based just on rock mineral content.

Petrografia, geoquímica e geocronologia das rochas metavulcânicas e metaplutônicas dos Greenstone Belts faina e Serra de Santa Rita : implicações para o ambiente tectônico

Dissertação (mestrado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geologia, 2016.

Estudo da antiga mina de volfrâmio das Aveleiras (Mire de Tibães): cartografia geotécnica e avaliação geomecânica

Este trabalho tem como objetivo sublinhar a importância de um estudo geológico‐geotécnico para apoiar a cartografia geotécnica do maciço rochoso subterrâneo da antiga mina de volfrâmio das Aveleiras (Mosteiro de Tibães, Braga). Foi realizado um trabalho de campo sistemático, ao longo de uma rede de galerias subterrâneas com uma extensão aproximada de 155 m. Estas galerias são constituídas, principalmente, por rochas metassedimentares, embora aflorem rochas graníticas num pequeno trecho de uma das galerias. A técnica de amostragem linear de descontinuidades aplicada ao grau de compartimentação do maciço rochoso esteve na base de todos os dados geológicos, geotécnicos e geomecânicos. Além disso, foram coligidos e integrados os dados de campanhas de campo anteriores, realizadas entre 2006 e 2011. Foram igualmente descritos os métodos de avaliação dos dados de campo, bem como a análise estatística dos parâmetros geológico‐geotécnicos. O zonamento geotécnico do maciço rochoso das Aveleiras foi desenvolvido tendo em conta o comportamento do maciço rochoso in situ, e foi apoiado por ensaios laboratoriais de resistência do material‐rocha através do Ensaio de Carga Pontual. Apresenta‐se uma proposta preliminar de zonamento geomecânico com o objectivo de apoiar o projeto de engenharia de maciços rochosos.

Relações pedomorfogeológicas nas chapadas elevadas do Distrito Federal

A caracterização pedológica e o entendimento das relações entre pedologia, geologia e geomorfologia são importantes para a compreensão da distribuição dos solos numa paisagem. O objetivo deste estudo foi avaliar as relações pedomorfogeológicas na região das Chapadas Elevadas do Distrito Federal (DF), mediante caracterização química, física, mineralógica e geoquímica dos solos de ocorrência nesse compartimento da paisagem. Foram selecionadas duas topossequências representativas da distribuição pedológica nas Chapadas Elevadas do DF, cujos solos foram formados a partir de rochas metassedimentares do Grupo Paranoá, representados por Latossolos Vermelhos (LV), Latossolos Vermelho-Amarelos (LVA) e Cambissolos (C). Os Latossolos das duas topossequências apresentaram a maioria dos atributos físicos, químicos e mineralógicos semelhantes. A variação da cor nesses Latossolos é proveniente da mineralogia diferenciada dos óxidos de Fe - hematita predominante nos LV e goethita nos LVA. No entanto, as análises por meio de ICP-AES apresentaram teores de Fe2O3 similares nos Latossolos, demonstrando material de origem (rochas metassedimentares) de composição geoquímica semelhante. A formação da goethita nos LVA foi considerada dependente da sua posição geomorfológica de desenvolvimento, nas bordas das chapadas, onde a oscilação do lençol freático proporcionou a formação de horizonte litoplíntico, com consequente deficiência das condições de drenagem. Os Cambissolos apresentaram-se quimicamente semelhantes aos Latossolos em razão do material de origem, que são rochas metassedimentares já pré-intemperizadas. O estudo das relações pedomorfogeológicas permitiu constatar que a distribuição dos solos nas Chapadas Elevadas do Distrito Federal é condicionada pela evolução geomorfológica e pela geologia da região.

Condicionamento estrutural das zonasa de cisalhamento da região de Forquilha, domínio Ceará Central: uma abordagem integrada de sensoriamento remoto e geologia estrutural

The studied region, named Forquilha and localized in northwestern Central Ceará domain (northern portion of Borborema Province), presents a lithostratigraphic framework constituted by paleoproterozoic metaplutonics, metasedimentary sequences and neoproterozoic granitoids. The metasedimentary rocks of Ceará group occupy most part of the area. This group is subdivided in two distinct units: Canindé and Independência. Canindé unit is represented basically by biotite paragneisses and muscovite paragneisses, with minor metabasic rocks (amphibolite lens). Independência sequence is composed by garnetiferous paragneisses, sillimanite-garnet-quartz-muscovite schists and quartz-muscovite schists, pure or muscovite quartzites and rare marbles. At least three ductile deformation events were recognized in both units of Ceará group, named D1, D2 and D3. The former one is interpreted as related to a low angle tangential tectonics which mass transport is southward. D2 event is marked by the development of close/isoclinal folds with a N-S oriented axis. Refolding patterns generated by F1 and F2 superposition are found in several places. The latest event (D3) corresponds to a transcurrent tectonics, which led to development of mega-folds and several shear zones, under a transpressional regime. The mapped shear zones are Humberto Monte (ZCHM), Poço Cercado (ZCPC) and Forquilha (ZCF). Digital image processing of enhanced Landsat 7-ETM+ satellite images, combined with field data, demonstrate that these penetrative structures are associated with positive and negative geomorphologic patterns, distributed in linear and curvilinear arrangements with tonal banding, corresponding to the ductile fabric and to crests. Diverse color composites were tested and RGB-531 and RGB-752 provided the best results for lineament analysis of the most prominent shear zones. Spatial filtering techniques (3x3 and 5x5 filters) were also used and the application of Prewitt filters generated the best products. The integrated analysis of morphological and textural aspects from filtered images, variation of tonalities related to the distribution of geologic units in color composites and the superposition over a digital elevation model, contributed to a characterization of the structural framework of the study area. Kinematic compatibility of ZCHM, ZCPC, ZCF shear zones, as well as Sobral-Pedro II (ZCSPII) shear zone, situated to the west of the study area, was one of the goal of this work. Two of these shear zones (ZCHM, ZCPC) display sinistral movements, while the others (ZCSPII, ZCF) exhibit dextral kinematics. 40Ar/39Ar ages obtained in this thesis for ZCSPII and ZCPC, associated with other 40Ar/39Ar data of adjacent areas, indicate that all these shear zones are related to Brasiliano orogeny. The trend of the structures, the opposite shear senses and the similar metamorphic conditions are fitted in a model based on the development of conjugate shear zones in an unconfined transpression area. A WNW-ESE bulk shortening direction is infered. The geometry and kinematic of the studied structures suggest that shortening was largely accommodated by lateral extrusion, with only minor amounts of vertical stretch

Contexto geológico e estrutural do Maciço Rio Apa, sul do Cráton amazônico - MS

Rio Apa Massif crops out in the Mato Grosso do Sul state and corresponds to the southeastern portion of the Amazonian Craton dominantly Paleoproterozoic in age. Rio Apa Complex is oldest and it is composed mainly by migmatitic orthogneisses, beyond amphybolites, tonalities and granodiorite. Alto Tererê Group is composed by schists, biotitemuscovite gneisses and micaceous quartzites generally rich in garnets, beyond metabasic rocks of low amphibolite facies. The Amoguijá Group is constituted by Alumiador Intrusive Suite, which is represented by a sieno to monzogranitic batholith and Serra da Bocaina Volcanic Suite composed of volcanoclastic rocks of alkali riolites to monzoriolites compositions and pyroclastic products. Overlaying towards East and South occurs Neoproterozoic metasedimentary rocks from the Paraguai Folded Belt (Cuiabá, Corumbá and Jacadigo Groups - Urucum Formation). Structural-metamorphic framewok is identified by five deformational phases but the actual tectonic and metamorphic structure shows the superposed tectonic array of the Paraguai Folded Belt. Rocks from Rio Apa Complex, Alto Tererê Group and Amoguijá Group record an older structural evolution defined by (Dn-1 and Dn). The deformational phases (Dn+1 and Dn+2) are visible mainly in rocks of Paraguai Folded Belt beyond the last deformation (Dn+3) that imprints all sequences.

Magmatismo do batólito rapakivi Rio Branco, sw do Cráton Amazônico (MT)

Rio Branco Rapakivi Batholith is located on the southwestern portion of the Amazonian Craton in Mato Grosso and belongs to the Cachoeirinha Tectonic Domain, part of the Rio Negro-Juruena Geochronological Province, Central Brasil. The batholith is constituted by microgabbros to quartz microgabbros and microdiorites to quartz microdiorites, middle to fine-grained equigranular to porphyritic varieties form the Rio Branco Intrusive Basic Suite, showing a discontinuous distribution and located near the margins of the intrusion.Majorly constituted by porphyritic, granophyric and isotropic facies of Rio Branco Intrusive Acid Suit which is composed by older dark red rapakivi monzogranites to quartz monzonites and quartz sienites (1403±0.6 Ma) and the younger red rapakivi leuco-monzogranites (1382±49 Ma) and late equigranular to pegmatitic monzogranites. The magmatism is constituted by two distinct magmas related to the end of the collisional event of Cachoeirinha Orogeny, one with alkaline basalts generated in an intraplate environment and the other postorogenic to anorogenic with peraluminous to metaluminous compositions and define a high-K calc-alkaline to shoshonitic magmatism in transition among the I- and A-types. The contacts are marked by extensive mafic sills and dikes of alkaline basalts derived from intraplate environment of the Salto do Céu Intrusive Basic Suite (±808 Ma) associate to the Sunsás-Aguapei Orogenic Belt and metasedimentary rocks of the Aguapeí Grup.

Geotermobarometria de Granulitos Associados à Supracrustais na Porção Norte do Complexo Guaxupé - Região de Arceburgo - Santa Cruz do Prata, MG

This paper is a contribution for the understanding of the geological evolution of Guaxupé Complex. New data on petrography and mineral chemistry as well as estimates of metamorphic (P-T) conditions in the region of Arceburgo - Santa Cruz do Prata (MG) Brazil, at the southern portion of the Brasília Belt, more specifically at the Guaxupé Complex (Domain) are now presented. The lithotypes are high-grade metamorphic rocks subdivided into two groups: metasediments and granulites (orthoderivates). Chemical analysis of minerals was performed in three steps including core and rim of amphibole, pyroxene, feldspar, biotite, and garnet from samples of the following rock types: enderbites, mafic granulites, charnockites, and alkali feldspar charnockites. Results obtained with geothermobarometric calculations show metamorphic peak around 900°C of T and 10 kbar of P. Enderbites and tonalite granulites (mafic) show the highest values of temperature and pressure, while alkali feldspar charnockites show the lowest probably due to their late generation in relation to mafic rock types (enderbites and mafic tonalite granulite). Chemical mineral analysis in metamorphic parageneses and geothermobarometric calculations indicate that the possible metamorphic peak may be higher than 900°C of temperature and around 10 kbar of pressure, within a isothermal decompression (ITD) regime.

Caracterização da condutividade hidráulica do embasamento cristalino alterado saturado na região metropolitana de São Paulo

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização dos granitóides brasilianos da faixa de dobramentos Paraguai, MS e MT

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)