Office of Naval Research : forty years of excellence in support of naval science : 40th anniversary, 1946-1986.

Item 407

Software and Space: Investigating How a Cosmology Research Group Enacts Infrastructure by Producing Software

Thesis (Ph.D.)--University of Washington, 2016-08

Rocks are human beings: researching the humanizing metaphor in earth science scientific texts

This paper describes a corpus-based analysis of the humanizing metaphor and supports that constitutive metaphor in science and technology may be highly metaphorical and active. The study, grounded in Lakoff’s Theory of Metaphor and in Langacker’s relational networks, consists of two phases: firstly, Earth Science metaphorical terms were extracted from databases and dictionaries and, then, contextualized by means of the “Wordsmith” tool in a digitalized corpus created to establish their productivity. Secondly, the terms were classified to disclose the main conceptual metaphors underlying them; then, the mappings and the relational networks of the metaphor were described. Results confirm the systematicity and productivity of the metaphor in this field, show evidence that metaphoricity of scientific terms is gradable, and support that Earth Science metaphors are not only created in terms of their concrete salient properties and attributes, but also on abstract human anthropocentric projections.

A phenomenological study of Irish and Portuguese women’s experiences of receiving family support when studying STEM subjects at technical institutes

Comunicação apresentada na 44th SEFI Conference, 12-­15 September 2016, Tampere, Finland

INCORPORATING STIMULATING QUICK-WRITE PROMPTS WITHIN A SECONDARY SCIENCE CLASSROOM: A CASE STUDY IN LESOTHO

The use of intriguing open-ended quick-write prompts within the Basotho science classroom could potentially provide a way for secondary teachers in Lesotho to have a time-efficient alternative to stimulate student thinking and increase critical thinking or application of scientific principles. Writing can be used as a powerful means to improve the achievement of students across many subject areas, including the sciences (Moore, 1993; Rivard, 1994; Rillero, Zambo, Cleland, and Ryan, 1996; Greenstein, 2013). This study focuses on the use of a non-traditional nor extensively studied writing method that could potentially support learning in science. A quasi-experimental research design, with a control and experimental group, was applied. The study was conducted at two schools, with one experimental classroom in one school and a second control group classroom in the second school for a period of 4 weeks. 51 Form B (US Grade 9 equivalent) students participated as the experimental group and 43 Form B students as the control group. In an effort to assess learning achievement, a 1 hour (35 mark) pre-test evaluation was made by and given to students by Basotho teachers at the beginning of this study to have an idea of student’s previous knowledge. Topics covered were Static Electricity, Current Electricity, Electromagnetic Waves, and Chemistry of Water. After the experimental trial period, an almost completely identical post-test evaluation was given to students in the same fashion to observe and compare gains in achievement. Test data was analyzed using an inferential statistics procedure that compared means and gains in knowledge made by the experimental and control groups. Difference between the gains of mean pre-test and post-test scores were statistically significant within each group, but were not statistically significant when the control and experimental groups were compared. Therefore, there was no clear practical effect. Qualitative data from teachers’ journals and students’ written feedback provides insight on the assessments, incorporation of the teaching method, and the development of participating students. Both mid and post-study student feedback shows that students had an overall positive and beneficial experience participating in this activity. Assessments and teacher journals showed areas of strength and weaknesses in student learning and on differences in teaching styles. They also helped support some feedback claims made by students. Areas of further research and improvement of the incorporation of this teaching method in the Basotho secondary science classroom are explored.

Talents in Migration Processes in the Conditions of the Czech Republic of the Nineties

The transformation of the 1990s has had a bearing on the academic and scientific world, as is becoming increasingly obvious with the changing numbers of foreign students wishing to study in the Czech Republic and of Czech students wishing to study abroad, the virtual collapse of doctoral studies, and the rapidly increasing age of Czech academics (placed at 48 by official sources and at rather more by this research). At the same time there is an apparent lack of interest in analysing and understanding these trends, which Mr. Cermak terms an ostrich policy, although his research showed that academics are in fact both aware and concerned about them. The mid-1990s migration of talent to and from R+D in the Czech Republic is also reflected in the number of talented Czech students studying abroad, who represent the largest and most interesting group of actual and potential migrants. Mr. Cermak's study took the form of a Delphi enquiry participated in by 44 specialists, including experts in the problems of higher education and science policy from the Presidium of the Higher Education Council (n = 23), members of the Council's Science and Research Commission (n = 14), former and current managers of higher education authorities (n = 4) and selected participants of the longitudinal talent research (n = 3). Questions considered included the influence of continuing talent migration from domestic R+D on the efficiency of domestic higher education, the diversification of forms of the brain drain and their impact on other processes in society, the possibility of positive influence on the brain drain processes to minimise the risks it presents, and the use of the knowledge obtained about the brain drain. The study revealed a clear drop of interest in brain drain problems in higher education in the mid-1990s, which is probably related to the collapsed of Czech R+D in the field of talent education. The effects on this segment of the labour market appeared earlier, with a major migration wave in 1991-1993 which significantly "cleared" the area of scientific talent. In addition, prospective talents from the ranks of younger students have not been integrated into domestic R+D, leading to the increasing average age of those working in this field. "Talent scouting" tended to be oriented towards much younger individuals, even in some cases towards undergraduate students. The R+D institutions deprived of human resources considered as basic in a functional R+D system have lost much of their dynamism and so no longer attract not only domestic talent but also talent from other regions. As a result the public, including the mass media and political structures, have stopped regarding the support of domestic science as a priority. This is clear both among the young people who are important for the future development of R+D (support for the education of talented children has dropped), from the drop in the prestige of this area as a profession among university students, and from the lack of explicit support for R+D by any of the political parties. On the basis of his findings Mr. Cermak concludes that there is no basis for the belief that the brain drain will represent a positive force in stimulating the development of the open society. Migration data shows that the outflow of talent from the Czech Republic far exceeds the inflow, and that the latter is largely short-term. Not only has the number of returning Czech professors dropped to half of its level at the beginning of the 1990s, but they also tend to take up only short-term contracts and retain their foreign positions. Recruitment of scientific talent from other countries, including the Slovak Republic, is limited. Furthermore internal contacts between those already involved in R+D have been badly hit by economic pressures and institutional co-operation has dropped to a minimum. There have been few moves to counteract this situation, the only notable one being the Program 250, launched in 1996 with government support to try and attract younger (i.e. under 40) talent into R+D. Its resources are however limited and its effects have not so far been evaluated. The deficit of academic and scientific talent in the Czech Republic is increasing and two major directions of academic work are emerging. Classic higher education science based on the teaching process is declining, largely due to economic factors, while there is an increasing emphasis on special; ad hoc projects which cannot be related directly to teaching but are often interesting to specialists outside the Czech Republic. This is shown clearly by the increase in publishing and in participation in domestic and foreign grant projects, which often serve to supplement the otherwise low salaries in the higher education sector. This tend was also accelerated by the collapse of applied R+D in individual sectors of the national economy and by substantial cutbacks in the Czech Academy of Sciences, which formerly fostered such research. Some part of the output of this research can be used in the education system and its financial contribution does significantly affect the stability of the present staff, but Mr. Cermak sees it as generally unfavourable for the development of talent education. In addition, it has led to a certain resignation on the question of integration into international structures, due to the emphasis on short-term targets, commercial advantages and individualism rather than team work. At the same time, he admits that these developments reflect those in other areas of the transformation in the Czech Republic.

Investing in scientific progress, 1961-1970 : concepts, goals, and projections.

"NSF 61-27."

Impact in contact lenses and the anterior eye:challenges prevailing in 2015

As we settle into a new year, this second issue of Contact Lens and Anterior Eye allows us to reflect on how new research in this field impacts our understanding, but more importantly, how we use this evidence basis to enhance our day to day practice, to educate the next generation of students and to construct the research studies to deepen our knowledge still further. The end of 2014 saw the publication of the UK governments Research Exercise Framework (REF) which ranks Universities in terms of their outputs (which includes their paper, publications and research income), environment (infrastructure and staff support) and for the first time impact (defined as “any effect on, change or benefit to the economy, society, culture, public policy or services, health, the environment or quality of life, beyond academia” [8]). The REF is a process of expert review, carried out in 36 subject-based units of assessment, of which our field is typically submitted to the Allied Health, Dentistry, Nursing and Pharmacy panel. Universities that offer Optometry did very well with Cardiff, Manchester and Aston in the top 10% out of the 94 Universities that submitted to this panel (Grade point Average ranked order). While the format of the new exercise (probably in 2010) to allocate the more than £2 billion of UK government research funds is yet to be determined, it is already rumoured that impact will contribute an even larger proportion to the weighting. Hence it is even more important to reflect on the impact of our research. In this issue, Elisseef and colleagues [5] examine the intriguing potential of modifying a lens surface to allow it to bind to known wetting agents (in this case hyaluronic acid) to enhance water retention. Such a technique has the capacity to reduced friction between the lens surface and the eyelids/ocular surface, presumably leading to higher comfort and less reason for patients to discontinue with lens wear. Several papers in this issue report on the validity of new high precision, fast scanning imaging and quantification equipment, utilising techniques such as Scheimpflug, partial coherence interferometry, aberrometry and video allowing detailed assessment of anterior chamber biometry, corneal topography, corneal biomechanics, peripheral refraction, ocular aberrations and lens fit. The challenge is how to use this advanced instrumentation which is becoming increasingly available to create real impact. Many challenges in contact lenses and the anterior eye still prevail in 2015 such as: -While contact lens and refractive surgery complications are relatively rare, they are still too often devastating to the individual and their quality of life (such as the impact and prognosis of patients with Acanthmoeba Keratitis reported by Jhanji and colleagues in this issue [7]). How can we detect those patients who are going to be affected and what modifications do we need to make to contact lenses and patient management prevent this occurring? -Drop out from contact lenses still occurs at a rapid rate and symptoms of dry eye seem to be the leading cause driving this discontinuation of wear [1] and [2]. What design, coating, material and lubricant release mechanism will make a step change in end of day comfort in particular? -Presbyopia is a major challenge to hassle free quality vision and is one of the first signs of ageing noticed by many people. As an emmetrope approaching presbyopia, I have a vested interest in new medical devices that will give me high quality vision at all distances when my arms won’t stretch any further. Perhaps a new definition of presbyopia could be when you start to orientate your smartphone in the landscape direction to gain the small increase in print size needed to read! Effective accommodating intraocular lenses that truly mimic the pre-presbyopic crystalline lenses are still a way off [3] and hence simultaneous images achieved through contact lenses, intraocular lenses or refractive surgery still have a secure future. However, splitting light reaching the retina and requiring the brain to supress blurred images will always be a compromise on contrast sensitivity and is liable to cause dysphotopsia; so how will new designs account for differences in a patient's task demands and own optical aberrations to allow focused patient selection, optimising satisfaction? -Drug delivery from contact lenses offers much in terms of compliance and quality of life for patients with chronic ocular conditions such as glaucoma, dry eye and perhaps in the future, dry age-related macular degeneration; but scientific proof-of-concept publications (see EIShaer et al. [6]) have not yet led to commercial products. Part of this is presumably the regulatory complexity of combining a medical device (the contact lens) and a pharmaceutical agent. Will 2015 be the year when this innovation finally becomes a reality for patients, bringing them an enhanced quality of life through their eye care practitioners and allowing researchers to further validate the use of pharmaceutical contact lenses and propose enhancements as the technology matures? -Last, but no means least is the field of myopia control, the topic of the first day of the BCLA's Conference in Liverpool, June 6–9th 2015. The epidemic of myopia is a blight, particularly in Asia, with significant concerns over sight threatening pathology resulting from the elongated eye. This is a field where real impact is already being realised through new soft contact lens optics, orthokeratology and low dose pharmaceuticals [4], but we still need to be able to better predict which technique will work best for an individual and to develop new techniques to retard myopia progression in those who don’t respond to current treatments, without increasing their risk of complications or the treatment impacting their quality of life So what will your New Year's resolution be to make 2015 a year of real impact, whether by advancing science or applying the findings published in journals such as Contact Lens and Anterior Eye to make a real difference to your patients’ lives?

A multi-method study of the transformation of the carbonaceous skeleton of a polymer-based nanoporous carbon along the activation pathway

The change in the carbonaceous skeleton of nanoporous carbons during their activation has received limited attention, unlike its counterpart process in the presence of an inert atmosphere. Here we adopt a multi-method approach to elucidate this change in a poly(furfuryl alcohol)-derived carbon activated using cyclic application of oxygen saturation at 250 °C before its removal (with carbon) at 800 °C in argon. The methods used include helium pycnometry, synchrotron-based X-ray diffraction (XRD) and associated radial distribution function (RDF) analysis, transmission electron microscopy (TEM) and, uniquely, electron energy-loss spectroscopy spectrum-imaging (EELS-SI), electron nanodiffraction and fluctuation electron microscopy (FEM). Helium pycnometry indicates the solid skeleton of the carbon densifies during activation from 78% to 93% of graphite. RDF analysis, EELS-SI, and FEM all suggest this densification comes through an in-plane growth of sp2 carbon out to the medium range without commensurate increase in order normal to the plane. This process could be termed ‘graphenization’. The exact way in which this process occurs is not clear, but TEM images of the carbon before and after activation suggest it may come through removal of the more reactive carbon, breaking constraining cross-links and creating space that allows the remaining carbon material to migrate in an annealing-like process.

Queuing and routing in a hierarchical powerline communication system

Although power-line communication (PLC) is not a new technology, its use to support data communication with timing requirements is still the focus of ongoing research. A new infrastructure intended for communication using power lines from a central location to dispersed nodes using inexpensive devices was presented recently. This new infrastructure uses a two-level hierarchical power-line system, together with an IP-based network. Due to the master-slave behaviour of the PLC medium access, together with the inherent dynamic topology of power-line networks, a mechanism to provide end-to-end communication through the two levels of the power-line system must be provided. In this paper we introduce the architecture of the PLC protocol layer that is being implemented for this end.

Poster: EMMON: a WSN system architecture and toolset for large-scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective and usable WSN system architectures that address both functional and non-functional requirements in an integrated fashion. This poster outlines the EMMON system architecture for large-scale, dense, real-time embedded monitoring. It provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to maintain as much as flexibility as possible while meeting specific applications requirements. EMMON has been validated through extensive analytical, simulation and experimental evaluations, including through a 300+ nodes test-bed the largest single-site WSN test-bed in Europe.

EMMON: a WSN system architecture for large scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective, feasible and usable system architectures that address both functional and non-functional requirements in an integrated fashion. In this paper, we outline the EMMON system architecture for large-scale, dense, real-time embedded monitoring. EMMON provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to use standard commercially-available technologies, while maintaining as much flexibility as possible to meet specific applications requirements. The EMMON architecture has been validated through extensive simulation and experimental evaluation, including a 300+ node test-bed, which is, to the best of our knowledge, the largest single-site WSN test-bed in Europe to date.

International survey on skin patch test procedures, attitudes and interpretation.

BACKGROUND Skin patch test is the gold standard method in diagnosing contact allergy. Although used for more than 100 years, the patch test procedure is performed with variability around the world. A number of factors can influence the test results, namely the quality of reagents used, the timing of the application, the patch test series (allergens/haptens) that have been used for testing, the appropriate interpretation of the skin reactions or the evaluation of the patient's benefit. METHODS We performed an Internet -based survey with 38 questions covering the educational background of respondents, patch test methods and interpretation. The questionnaire was distributed among all representatives of national member societies of the World Allergy Organization (WAO), and the WAO Junior Members Group. RESULTS One hundred sixty-nine completed surveys were received from 47 countries. The majority of participants had more than 5 years of clinical practice (61 %) and routinely carried out patch tests (70 %). Both allergists and dermatologists were responsible for carrying out the patch tests. We could observe the use of many different guidelines regardless the geographical distribution. The use of home-made preparations was indicated by 47 % of participants and 73 % of the respondents performed 2 or 3 readings. Most of the responders indicated having patients with adverse reactions, including erythroderma (12 %); however, only 30 % of members completed a consent form before conducting the patch test. DISCUSSION The heterogeneity of patch test practices may be influenced by the level of awareness of clinical guidelines, different training backgrounds, accessibility to various types of devices, the patch test series (allergens/haptens) used for testing, type of clinical practice (public or private practice, clinical or research-based institution), infrastructure availability, financial/commercial implications and regulations among others. CONCLUSION There is a lack of a worldwide homogeneity of patch test procedures, and this raises concerns about the need for standardization and harmonization of this important diagnostic procedure.

Opportunity meets uncertainty. Towards sustainable business in the Arctic region

The Arctic region is experiencing a significant change in terms of climate change and a growing economic interest towards its natural resources and emerging business opportunities. The purpose of this study is to explore how can Finnish companies create sustainable business in the Arctic. This is done by examining the arctic business environment, identifying sectors with growth potential, addressing challenges related to operating in the Arctic and suggesting how to ensure sustainability and succeed in the globally competed arctic market. The theoretical framework is based on theories of sustainable development, corporate social responsibility and the role of strategy in creating sustainable business. Empirical data was collected by using qualitative research methods: first, background knowledge was formed based on written documents and, secondly, six expert interviews were conducted in early 2014. The interviewees represented the viewpoints of companies, political decision makers and NGO’s. The analysis of the data was conducted using thematic categorization. The empirical findings of the study suggest that in order to create sustainable business in the Arctic companies should adopt a long-term perspective, embrace a holistic approach to sustainability, understand interdependencies between the dimensions of sustainability and aim at high-level engagement in responsible behavior. To succeed in the arctic market core competencies, customer needs, multivendor cooperation and long-term presence need to be invested in on a company level. In addition, to promote and advance arctic development on a national level support is needed in terms of investments in infrastructure, funding research and design, creating a regulative framework and removing barriers of trade.

Modelling of Johne's disease control options in beef cattle: a decision support approach

Johne's disease in cattle is a contagious wasting disease caused by Mycobacterium avium subspecies paratuberculosis (MAP). Johne's infection is characterised by a long subclinical phase and can therefore go undetected for long periods of time during which substantial production losses can occur. The protracted nature of Johne's infection therefore presents a challenge for both veterinarians and farmers when discussing control options due to a paucity of information and limited test performance when screening for the disease. The objectives were to model Johne's control decisions in suckler beef cattle using a decision support approach, thus implying equal focus on ‘end user’ (veterinarian) participation whilst still focusing on the technical disease modelling aspects during the decision support model development. The model shows how Johne's disease is likely to affect a herd over time both in terms of physical and financial impacts. In addition, the model simulates the effect on production from two different Johne's control strategies; herd management measures and test and cull measures. The article also provides and discusses results from a sensitivity analysis to assess the effects on production from improving the currently available test performance. Output from running the model shows that a combination of management improvements to reduce routes of infection and testing and culling to remove infected and infectious animals is likely to be the least-cost control strategy.