Estudo da influência de pré-tratamentos de dois resíduos lignocelulósicos (bagaço do pedúnculo de caju e casca de coco) utilizados como substrato na indução à síntese de enzimas celulolíticas

Nowadays generation ethanol second, that t is obtained from fermentation of sugars of hydrolyses of cellulose, is gaining attention worldwide as a viable alternative to petroleum mainly for being a renewable resource. The increase of first generation ethanol production i.e. that obtained from sugar-cane molasses could lead to a reduction of lands sustainable for crops and food production. However, second generation ethanol needs technologic pathway for reduce the bottlenecks as production of enzymes to hydrolysis the cellulose to glucose i.e. the cellulases as well as the development of efficient biomass pretreatment and of low-cost. In this work Trichoderma reesei ATCC 2768 was cultivated under submerged fermentation to produce cellulases using as substrates waste of lignocellulosic material such as cashew apple bagasse as well as coconut bagasse with and without pretreatment. For pretreatment the bagasses were treated with 1 M NaOH and by explosion at high pressure. Enzyme production was carried out in shaker (temperature of 27ºC, 150 rpm and initial medium pH of 4.8). Results showed that T.reesei ATCC 2768 showed the higher cellulase production when the cashew apple bagasse was treated with 1M NaOH (2.160 UI/mL of CMCase and 0.215 UI/mL of FPase), in which the conversion of cellulose, in terms of total reducing sugars, was of 98.38%, when compared to pretreatment by explosion at high pressure (0.853 UI/mL of CMCase and 0.172 UI/mL of Fpase) showing a conversion of 47.39% of total reducing sugars. Cellulase production is lower for the medium containing coconut bagasse treated with 1M NaOH (0.480 UI/mL of CMcase and 0.073 UI/mL of FPase), giving a conversion of 49.5% in terms of total reducing sugars. Cashew apple bagasse without pretreatment showed cellulase activities lower (0.535 UI/mL of CMCase and 0,152 UI/mL of FPase) then pretreated bagasse while the coconut bagasse without pretreatment did not show any enzymatic activity. Maximum cell concentration was obtained using cashew nut bagasse as well as coconut shell bagasse treated with 1M NaOH, with 2.92 g/L and 1.97 g/L, respectively. These were higher than for the experiments in which the substrates were treated by explosion at high pressure, 1.93 g/L and 1.17 g/L. Cashew apple is a potential inducer for cellulolytic enzymes synthysis showing better results than coconut bagasse. Pretreatment improves the process for the cellulolytic enzyme production

Hidrólise de resíduos lignocelulósicos utilizando extrato enzimático celulolítico produzido por Trichoderma reesei atcc 2768

Cellulolytic enzymatic broth by Trichoderma reesei ATCC 2768 cultived in shaker using cashew apple bagasse and coconut shell bagasse, as substrate for fermentation, was used to investigate the enzymatic hydrolysis of these substrates after pre-treatment with 1 M NaOH, wet-oxidation as well as a combination of these treatments. Hydrolysis runs were carried at 125 rpm, 50ºC and initial pH of 4.8 for 108 hours. Enzymatic broth produced using cashew apple bagasse treated with 1M NaOH (1.337 UI/mL CMCase and 0.074 UI/mL FPase), showed after the hydrolysis an initial of 0.094 g of reducing sugar/g of substrate.h with 96% yield of total reducing sugars while for the coconut shell bagasse treated using the alkaline process (0.640 UI/mL CMCase and 0.070 UI/mL FPase) exhibited an initial hydrolysis velocity of 0.025 g of reducing sugar/g of substrate.h with 48% yield of total reducing sugars. For the treatment with wet-oxidation using cashew apple bagasse as substrate enzymatic broth (0.547 UI/mL CMCase) exhibited an initial hydrolysis velocity of 0.014 g of reducing sugars/g of substrate.h with a lower yield about 89% of total reducing sugars compared to the alkaline treatment. Enzymatic broth produced using coconut shell treated by wet-oxidation showed an initial hydrolysis velocity of 0.029 g of reducing sugar/g of substrate.h with 91% yield. However, when the combination of these two treatments were used it was obtained an enzymatic broth of 1.154 UI/mL CMCase and 0.107 FPase for the cashew apple bagasse as well as 0.538 UI/mL CMCase and 0,013 UI/mL de FPase for the coconut shell bagasse. After hydrolysis, initial velocity was 0.029 g of reducing sugar/g of substrate.h. with 94% yield for the cashew apple bagasse and 0.018 g de reducing sugar/g of substrate.h with 69% yield for coconut shell bagasse. Preliminary treatment improves residues digestibility showing good yields after hydrolysis. In this case, cellulose from the residue can be converted into glucose by cellulolytic enzymes that can be used for ethanol production

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Cinética micelial dos fungos comestíveis Pleurotus ostreatus e Lentinula edodes em resíduos lignocelulósicos

The objective of this work was to evaluate the mycelial growth of 2 edible fungi (Pleurotus ostreatus and Lentinula edodes) in 6 culture media [(malt-agar, sawdustdextrose-agar-marupá (SDA-MA), sawdust-dextrose-agar-cajuí (SDA-CA), sawdust-dextrose-agaraçaí (SDA-AÇA), sawdust-dextrose-agar-banana 50% (BAN 50%) and sawdust-dextrose-agar-banana 100% (BAN 100%)], in Petri dishes. The experimental design was totally randomized, in a 6x2 factorial scheme. Each treatment consisted of six repetitions in 1 Petri dish, totaling 72 experimental units. It was verified that P. ostreatus presented better mycelial development (81.00; 64.66; 81.00; 50.16 and 33.33mm for SDA-MA, SDA-CA, SDA-AÇA, BAN 50% and BAN 100%, respectively) than L. edodes (32.00; 31.66; 27.66; 37.33 and 21.83mm for SDA-MA, SDA-CA, SDA-AÇA, BAN 50% and BAN 100%, respectively). It was also verified that there was no advantage for L. edodes in relation to mycelial growth, when media based on residues were used, compared to malt-agar medium (control), which obtained the best performance (62.17mm). As for P. ostreatus, SDA-MA and SDA-AÇA medium presented the highest growth averages (81 mm), representing a growth increase of 34% in relation to the control medium (malt-agar), whose growth average was 60.33mm. Thus, the residues tested present potential to be used in fungiculture, especially for the cultivation of P. ostreatus.

Pré-tratamento enzimático de resíduos lignocelulósicos para sacarificação.

No Brasil são gerados anualmente toneladas de resíduos agroindustriais de composição lignocelulósica, os quais podem ser utilizados como biomassa para produção de etanol de segunda geração (2G). Nesse trabalho avaliou-se a aplicação de uma rota biológica para a remoção da lignina de materiais lignocelulósicos e posterior sacarificação por celulases. Extratos brutos enzimáticos ricos em lacase foram produzidos em cultivo líquido estático pelo fungo Pleurotus ostreatus e utilizados na presença e ausência de mediadores químicos para o pré-tratamento de casca de arroz e serragem de eucalipto urofila. O pré-tratamento da casca de arroz com lacases possibilitou um aumento de 2,6 vezes na concentração de açúcares após a sacarificação em comparação com a biomassa não pré-tratada. Não foram obtidos resultados significativos na sacarificação com o prétratamento da serragem de eucalipto pelas lacases, no entanto, modificações em picos correspondentes a lignina e a celulose foram observadas em análises realizadas por FTIR.

Avaliação de painéis produzidos a partir de resíduos sólidos para aplicação na arquitetura

O presente trabalho tem por objetivo o reaproveitamento de resíduos sólidos na preparação de painéis para uso na arquitetura. Para atingir as metas propostas, painéis foram preparados a partir de resíduos provenientes de embalagens cartonadas e plásticas, utilizando-se como elemento de reforço, resíduos lignocelulósicos (casca de amendoim e de arroz). A concentração e a natureza dos resíduos utilizados como matriz e como carga foram variadas gerando doze condições experimentais diferentes. As propriedades avaliadas dos painéis foram o módulo de ruptura, módulo de elasticidade, tração perpendicular à superfície, inchamento em espessura, absorção de água e densidade. Todos os ensaios foram realizados segundo as normas ASTM D1037 e EN 317, referente à chapa de partículas. Os resultados foram analisados segundo a norma ANSI A208.1 que especifica as propriedades de desempenho requeridas para as chapas de partículas. Os painéis foram classificados como de baixa densidade, podendo ser utilizados como forros, divisórias, revestimento decorativos e demais aplicações que requerem as mesmas propriedades físicas e mecânicas. Os painéis a base de embalagem plástica reforçados com casca de arroz apresentaram propriedades superiores do que os demais painéis produzidos. O elemento arquitetônico desenvolvido neste estudo representa um novo mercado potencial, podendo ser empregado no ambiente urbano e rural, atendendo ao conceito de produto ecoeficiente.

Produção de bioetanol de segunda geração pelo consórcio Zymomonas mobilis CCT4494 e Candida tropicallis em resíduos de uvas Isabel e Bordô

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Relação C/N e proporção de fontes nitrogenadas na produtividade de Agaricus blazei Murrill e poder calorífico do composto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atividade de enzimas lignocelulolíticas no crescimento de Lentinula edodes em subprodutos energéticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Isolamento, identificação e caracterização de linhagem de levedura quanto ao crescimento e fermentação utilizando meios sintéticos com pentoses e hidrolisado de bagaço de cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Isolamento e seleção de fungos filamentosos termofílicos/termotolerantes produtores de celulases e xilanases e aplicação dos extratos enzimáticos na sacarificação do bagaço de cana-de-açúcar

Pós-graduação em Microbiologia - IBILCE

Seleção de micro-organismos celulolíticos comparados com o Trichoderma reesei CCT 2768

As celulases atualmente são enzimas extensivamente estudadas para a hidrólise de resíduos lignocelulósicos para obtenção de açúcares fermentescíveis utilizáveis em diferentes processos biotecnológicos, como a produção de bioetanol. O objetivo deste trabalho foi encontrar fungos celulolíticos que sejam eficientes nos processos de degradação da biomassa lignocelulósica. No presente trabalho foram selecionados 4 fungos celulolíticos previamente isolados pelo Laboratório de Biotecnologia Industrial (UNESP – Assis). Estes fungos foram cultivados em bagaço de cana-de-açúcar como substrato e para seus extratos enzimáticos foram testados suas atividades para celulases (FPase) e endoglucanases (CMCase). Os fungos FS09 (0,054 FPU/mL e 1,79 FPU/g de substrato, 0,874 U/mL e 29,1 U/g de substrato) e M51 (0,049 FPU/mL e 1,62 FPU/g de substrato, 1,094 U/mL e 36,46 U/g de substrato), mostrando valores superiores ao fungo T.reesei CCT 2768 que é referência em estudos e produção de celulases.

Prospecção de leveduras para a produção de biocombustíveis: estudo dos gêneros Aureobasidium e Meyerozyma

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)