FROM TRISECTIONS IN MODULE CATEGORIES TO QUASI-DIRECTED COMPONENTS

In this paper, we define and study a special type of trisections in a module category, namely the compact trisections which characterize quasi-directed components. We apply this notion to the study of laura algebras and we use it to define a class of algebras with predictable Auslander-Reiten components.

Ocean temperature response to idealized Gleissberg and de Vries solar cycles in a comprehensive climate model

The ~90-year Gleissberg and ~200-year de Vries cycles have been identified as two distinctive quasi-periodic components of Holocene solar activity. Evidence exists for the impact of such multi-decadal to centennial-scale variability in total solar irradiance (TSI) on climate, but concerning the ocean, this evidence is mainly restricted to the surface response. Here we use a comprehensive global climate model to study the impact of idealized solar forcing, representing the Gleissberg and de Vries cycles, on global ocean potential temperature at different depth levels, after a recent proxy record indicates a signal of TSI anomalies in the northeastern Atlantic at mid-depth. Potential impacts of TSI anomalies on deeper oceanic levels are climatically relevant due to their possible effect on ocean circulation by altering water mass characteristics. Simulated solar anomalies are shown to penetrate the ocean down to at least deep-water levels. Despite the fact that the two forcing periods differ only by a factor of ~2, the spatial pattern of response is significantly distinctive between the experiments, suggesting different mechanisms for solar signal propagation. These are related to advection by North Atlantic Deep Water flow (200-year forcing), and barotropic adjustment in the South Atlantic in response to a latitudinal shift of the westerly wind belt (90-year forcing).

The impact of nurse-directed protocolised-weaning from mechanical ventilation on nursing practice: A quasi-experimental study

Background:
Internationally, nurse-directed protocolised-weaning has been evaluated by measuring its impact on patient outcomes. The impact on nurses’ views and perceptions has been largely ignored.

Aim:
To determine the change in intensive care nurses’ perceptions, satisfaction, knowledge and attitudes following the introduction of nurse-directed weaning. Additionally, views were obtained on how useful protocolised-weaning was to practice.

Methods:
The sample comprised nurses working in general intensive care units in three university-affiliated hospitals. Nurse-directed protocolised-weaning was implemented in one unit (intervention group); two ICUs continued with usual doctor-led practice (control group). Nurses’ perceptions, satisfaction, knowledge and attitudes were measured by self-completed questionnaires before (Phase I) and after the implementation of nurse-directed weaning (Phase II) in all units.

Results:
Response rates were 79% (n=140n=140) for Phase 1 and 62% (n=132n=132) for Phase II. Regression-based analyses showed that changes from Phase I to Phase II were not significantly different between the intervention and control groups. Sixty-nine nurses responded to both Phase I and II questionnaires. In the intervention group, these nurses scored their mean perceived level of knowledge higher in Phase II (6.39 vs 7.17, p=0.01p=0.01). In the control group, role perception (4.41 vs 4.22, p=0.01p=0.01) was lower and, perceived knowledge (6.03 vs 6.63, p=0.04p=0.04), awareness of weaning plans (6.09 vs 7.06, p=0.01p=0.01) and satisfaction with communication (5.28 vs 6.19, p=0.01p=0.01) were higher in Phase II. The intervention group found protocolised weaning useful in their practice (75%): this was scored significantly higher by junior and senior nurses than middle grade nurses (p=0.02p=0.02).

Conclusion

We conclude that nurse-directed protocolised-weaning had no effect on nurses’ views and perceptions due to the high level of satisfaction which encouraged nurses’ participation in weaning throughout. Control group changes are attributed to a ‘reactive effect’ from being study participants. Weaning protocols provide a uniform method of weaning practice and are particularly beneficial in providing safe guidance for junior staff.

One-port de-embedding technique for the quasi-optical characterization of integrated components

We describe a one-port de-embedding technique suitable for the quasi-optical characterization of terahertz integrated components at frequencies beyond the operational range of most vector network analyzers. This technique is also suitable when the manufacturing of precision terminations to sufficiently fine tolerances for the application of a TRL de-embedding technique is not possible. The technique is based on vector reflection measurements of a series of easily realizable test pieces. A theoretical analysis is presented for the precision of the technique when implemented using a quasi-optical null-balanced bridge reflectometer. The analysis takes into account quantization effects in the linear and angular encoders associated with the balancing procedure, as well as source power and detector noise equivalent power. The precision in measuring waveguide characteristic impedance and attenuation using this de-embedding technique is further analyzed after taking into account changes in the power coupled due to axial, rotational, and lateral alignment errors between the device under test and the instruments' test port. The analysis is based on the propagation of errors after assuming imperfect coupling of two fundamental Gaussian beams. The required precision in repositioning the samples at the instruments' test-port is discussed. Quasi-optical measurements using the de-embedding process for a WR-8 adjustable precision short at 125 GHz are presented. The de-embedding methodology may be extended to allow the determination of S-parameters of arbitrary two-port junctions. The measurement technique proposed should prove most useful above 325 GHz where there is a lack of measurement standards.

Every N-Dimensional Separable Metric Space Contains a Totally Disconnected (n-1)-Dimensional Subset with no True Quasi-Components

Владимир Тодоров, Петър Стоев - Тази бележка съдържа елементарна конструкция на множество с указаните в заглавието свойства. Да отбележим в допълнение, че така полученото множество остава напълно несвързано дори и след като се допълни с краен брой елементи.

Star performers : task and contextual performance are components, but are they enough?

Identifying outstanding performers or ‘stars’ is a critical component of managing talent. However, organizational effectiveness in this area is limited by the current lack of guidance about the behaviour and characteristics of stars. We address this gap by combining a conceptual analysis with an empirical study involving 174 managers. Conceptually we examine the alignment of managers’ perceptions of outstanding performance with the well established task and contextual performance model and find this framework accounts for a core element in managers’ judgments about outstanding performers. However, a second, more qualitative approach finds that other dimensions including being self-directed, and a willingness to lead are also important. Our findings are consistent with a long-term trend toward identifying work effectiveness with highly discretionary, psychological and behavioural elements, and we consider the implications of this for the study and management of high level, individual effectiveness.

Investigation of mediated oxidation of ascorbic acid by ferrocenemethanol using large-amplitude fourier transformed ac voltammetry under quasi-reversible electron-transfer conditions at an indium tin oxide electrode

The ability of the technique of large-amplitude Fourier transformed (FT) ac voltammetry to facilitate the quantitative evaluation of electrode processes involving electron transfer and catalytically coupled chemical reactions has been evaluated. Predictions derived on the basis of detailed simulations imply that the rate of electron transfer is crucial, as confirmed by studies on the ferrocenemethanol (FcMeOH)-mediated electrocatalytic oxidation of ascorbic acid. Thus, at glassy carbon, gold, and boron-doped diamond electrodes, the introduction of the coupled electrocatalytic reaction, while producing significantly enhanced dc currents, does not affect the ac harmonics. This outcome is as expected if the FcMeOH (0/+) process remains fully reversible in the presence of ascorbic acid. In contrast, the ac harmonic components available from FT-ac voltammetry are predicted to be highly sensitive to the homogeneous kinetics when an electrocatalytic reaction is coupled to a quasi-reversible electron-transfer process. The required quasi-reversible scenario is available at an indium tin oxide electrode. Consequently, reversible potential, heterogeneous charge-transfer rate constant, and charge-transfer coefficient values of 0.19 V vs Ag/AgCl, 0.006 cm s (-1) and 0.55, respectively, along with a second-order homogeneous chemical rate constant of 2500 M (-1) s (-1) for the rate-determining step in the catalytic reaction were determined by comparison of simulated responses and experimental voltammograms derived from the dc and first to fourth ac harmonic components generated at an indium tin oxide electrode. The theoretical concepts derived for large-amplitude FT ac voltammetry are believed to be applicable to a wide range of important solution-based mediated electrocatalytic reactions.

Community wide interventions for increasing physical activity

Background Multi-strategic community wide interventions for physical activity are increasingly popular but their ability to achieve population level improvements is unknown. Objectives To evaluate the effects of community wide, multi-strategic interventions upon population levels of physical activity. Search methods We searched the Cochrane Public Health Group Segment of the Cochrane Register of Studies,The Cochrane Library, MEDLINE, MEDLINE in Process, EMBASE, CINAHL, LILACS, PsycINFO, ASSIA, the British Nursing Index, Chinese CNKI databases, EPPI Centre (DoPHER, TRoPHI), ERIC, HMIC, Sociological Abstracts, SPORTDiscus, Transport Database and Web of Science (Science Citation Index, Social Sciences Citation Index, Conference Proceedings Citation Index). We also scanned websites of the EU Platform on Diet, Physical Activity and Health; Health-Evidence.org; the International Union for Health Promotion and Education; the NIHR Coordinating Centre for Health Technology (NCCHTA); the US Centre for Disease Control and Prevention (CDC) and NICE and SIGN guidelines. Reference lists of all relevant systematic reviews, guidelines and primary studies were searched and we contacted experts in the field. The searches were updated to 16 January 2014, unrestricted by language or publication status. Selection criteria Cluster randomised controlled trials, randomised controlled trials, quasi-experimental designs which used a control population for comparison, interrupted time-series studies, and prospective controlled cohort studies were included. Only studies with a minimum six-month follow up from the start of the intervention to measurement of outcomes were included. Community wide interventions had to comprise at least two broad strategies aimed at physical activity for the whole population. Studies which randomised individuals from the same community were excluded. Data collection and analysis At least two review authors independently extracted the data and assessed the risk of bias. Each study was assessed for the setting, the number of included components and their intensity. The primary outcome measures were grouped according to whether they were dichotomous (per cent physically active, per cent physically active during leisure time, and per cent physically inactive) or continuous (leisure time physical activity time (time spent)), walking (time spent), energy expenditure (as metabolic equivalents or METS)). For dichotomous measures we calculated the unadjusted and adjusted risk difference, and the unadjusted and adjusted relative risk. For continuous measures we calculated percentage change from baseline, unadjusted and adjusted. Main results After the selection process had been completed, 33 studies were included. A total of 267 communities were included in the review (populations between 500 and 1.9 million). Of the included studies, 25 were set in high income countries and eight were in low income countries. The interventions varied by the number of strategies included and their intensity. Almost all of the interventions included a component of building partnerships with local governments or non-governmental organisations (NGOs) (29 studies). None of the studies provided results by socio-economic disadvantage or other markers of equity. However, of those included studies undertaken in high income countries, 14 studies were described as being provided to deprived, disadvantaged or low socio-economic communities. Nineteen studies were identified as having a high risk of bias, 10 studies were unclear, and four studies had a low risk of bias. Selection bias was a major concern with these studies, with only five studies using randomisation to allocate communities. Four studies were judged as being at low risk of selection bias although 19 studies were considered to have an unclear risk of bias. Twelve studies had a high risk of detection bias, 13 an unclear risk and four a low risk of bias. Generally, the better designed studies showed no improvement in the primary outcome measure of physical activity at a population level. All four of the newly included, and judged to be at low risk of bias, studies (conducted in Japan, United Kingdom and USA) used randomisation to allocate the intervention to the communities. Three studies used a cluster randomised design and one study used a stepped wedge design. The approach to measuring the primary outcome of physical activity was better in these four studies than in many of the earlier studies. One study obtained objective population representative measurements of physical activity by accelerometers, while the remaining three low-risk studies used validated self-reported measures. The study using accelerometry, conducted in low income, high crime communities of USA, emphasised social marketing, partnership with police and environmental improvements. No change in the seven-day average daily minutes of moderate to vigorous physical activity was observed during the two years of operation. Some program level effect was observed with more people walking in the intervention community, however this result was not evident in the whole community. Similarly, the two studies conducted in the United Kingdom (one in rural villages and the other in urban London; both using communication, partnership and environmental strategies) found no improvement in the mean levels of energy expenditure per person per week, measured from one to four years from baseline. None of the three low risk studies reporting a dichotomous outcome of physical activity found improvements associated with the intervention. Overall, there was a noticeable absence of reporting of benefit in physical activity for community wide interventions in the included studies. However, as a group, the interventions undertaken in China appeared to have the greatest possibility of success with high participation rates reported. Reporting bias was evident with two studies failing to report physical activity measured at follow up. No adverse events were reported.The data pertaining to cost and sustainability of the interventions were limited and varied. Authors' conclusions Although numerous studies have been undertaken, there is a noticeable inconsistency of the findings in the available studies and this is confounded by serious methodological issues within the included studies. The body of evidence in this review does not support the hypothesis that the multi-component community wide interventions studied effectively increased physical activity for the population, although some studies with environmental components observed more people walking. Plain language summary Community wide interventions for increasing physical activity Not having enough physical activity leads to poorer health. Regular physical activity can reduce the risk of chronic disease and improve one's health and wellbeing. The lack of physical activity is a common and in some cases a growing health problem. To address this, 33 studies have used improvement activities directed at communities, using more than one approach in a single program. When we first looked at the available research in 2011 we observed that there was a lack of good studies which could show whether this approach was beneficial or not. Some studies claimed that community wide programs improved physical activities and other studies did not. In this update we found four new studies that were of good quality; however none of these four studies increased physical activity levels for the population. Some studies reported program level effects such as observing more people walking, however the population level of physical activity had not increased. This review found that community wide interventions are very difficult to undertake, and it appears that they usually fail to provide a measurable benefit in physical activity for a population. It is apparent that many of the interventions failed to reach a substantial portion of the community, and we speculate that some single strategies included in the combination may lack individual effectiveness. Laički sažetak Intervencije u zajednici za povećanje tjelesne aktivnosti Nedostatna tjelesna aktivnost povezana je s lošijim zdravljem.Redovita tjelesna aktivnost može umanjiti rizik od kroničnih bolesti te poboljšati zdravlje i kvalitetu života pojedinca.Manjak tjelesne aktivnosti čest je problem, a učestalost tog problema se povećava.Cochrane sustavni pregled je analizirao 33 studije koje su istražile programe za povećanje tjelesne aktivnosti u zajednici, u kojima se koristilo više od jednog pristupa.Kad su prvi put pregledani dokazi iz istraživanja koja su bila dostupna 2011. godine, utvrđeno je da nema dovoljno dobrih studija koje bi mogle pokazati je li takav pristup koristan ili ne.Primjerice, neke studije tvrde da programi za povećanje tjelesne aktivnosti u zajednici poboljšavaju tjelesnu aktivnost pojedinaca u zajednici, a druge studije tvrde suprotno.U ovom obnovljenom sustavnom pregledu pronađene su 4 nove studije koje su bile visoke kvalitete, ail nijedna od tih studija nije pokazala da je istraživana intervencija dovela do povećanja tjelesne aktivnosti u zajednici.Neke su studije opisale učinak na način da je opisano da je uočeno da više ljudi u zajednici hoda, međutim, ukupna razina tjelesne aktivnosti u promatranoj populaciji nije se povećala.Ovaj sustavni pregled je utvrdio da je intervencije za povećanje tjelesne aktivnosti u zajednici teško provesti i čini se da one obično ne uspijevaju u svojoj namjeri da na mjerljiv način povećaju tjelesnu aktivnost u populaciji.Čini se da mnoge intervencije nisu uspjele doseći veći broj stanovnika u zajednici pa se može smatrati da neke od strategija uključene u analizirane kombinacije nisu zasebno učinkovite.

Hydrogen-Bond-Directed Nonlinear-Optical Organic Materials - Evidence For The Control Of 2nd-Harmonic Generation Activities From The X-Ray Crystal-Structures Of The Complexes Of L-Tartaric Acid With M-Anisidine and P-Toluidine

Several substituted anilines were converted to binary salts with L-tartaric acid. Second harmonic generation (SHG) activities of these salts were determined. The crystal packing in two structures, (i) m-anisidinium-L-tartrate monohydrate (i) and (ii) p-toluidinium-L-tartrate (2), studied using X-ray diffraction demonstrates that extensive hydrogen bonding steers the components into a framework which has a direct bearing on the SHG activity

Compiler-Directed Frequency and Voltage Scaling for a Multiple Clock Domain

Multiple Clock Domain processors provide an attractive solution to the increasingly challenging problems of clock distribution and power dissipation. They allow their chips to be partitioned into different clock domains, and each domain’s frequency (voltage) to be independently configured. This flexibility adds new dimensions to the Dynamic Voltage and Frequency Scaling problem, while providing better scope for saving energy and meeting performance demands. In this paper, we propose a compiler directed approach for MCD-DVFS. We build a formal petri net based program performance model, parameterized by settings of microarchitectural components and resource configurations, and integrate it with our compiler passes for frequency selection.Our model estimates the performance impact of a frequency setting, unlike the existing best techniques which rely on weaker indicators of domain performance such as queue occupancies(used by online methods) and slack manifestation for a particular frequency setting (software based methods).We evaluate our method with subsets of SPECFP2000,Mediabench and Mibench benchmarks. Our mean energy savings is 60.39% (versus 33.91% of the best software technique)in a memory constrained system for cache miss dominated benchmarks, and we meet the performance demands.Our ED2 improves by 22.11% (versus 18.34%) for other benchmarks. For a CPU with restricted frequency settings, our energy consumption is within 4.69% of the optimal.

Ultrasonic evaluation of delamination in quasi-isotropic CFRP laminates subjected to low-velocity impact

Ultrasonic C-Scan is used very often to detect flaws and defects in the composite components resulted during fabrication and damages resulting from service conditions. Evaluation and characterization of defects and damages of composites require experience and good understanding of the material as they are distinctly different in composition and behavior as compared to conventional metallic materials. The failure mechanisms in composite materials are quite complex. They involve the interaction of matrix cracking, fiber matrix interface debonding, fiber pullout, fiber fracture and delamination. Generally all of them occur making the stress and failure analysis very complex. Under low-velocity impact loading delamination is observed to be a major failure mode. In composite materials the ultrasonic waves suffer high acoustic attenuation and scattering effect, thus making data interpretation difficult. However these difficulties can be overcome to a greater extent by proper selection of probe, probe parameter settings like pulse width, pulse amplitude, pulse repetition rate, delay, blanking, gain etc., and data processing which includes image processing done on the image obtained by the C-Scan.

Component Assembling Model and Its Application to Quasi-Brittle Damage

Potential energy can be approximated by ‘‘pair-functional’’ potentials which is composed of pair potentials and embedding energy. Pair potentials are grouped according to discrete directions of atomic bonds such that each group is represented by an orientational component. Meanwhile, another kind of component, the volumetric one is derived from embedding energy. Damage and fracture are the changing and breaking of atomic bonds at the most fundamental level and have been reflected by the changing of these components’ properties. Therefore, material is treated as a component assembly, and its constitutive equations are formed by means of assembling these two kinds of components’ response functions. This material model is referred to as the component assembling model. Theoretical analysis and numerical computing indicate that the proposed model has the capacity of reproducing some results satisfactorily, with the advantages of physical explicitness and intrinsic induced anisotropy, etc.

Study Of The Damage-Induced Anisotropy Of Quasi-Brittle Materials Using The Component Assembling Model

Damage-induced anisotropy of quasi-brittle materials is investigated using component assembling model in this study. Damage-induced anisotropy is one significant character of quasi-brittle materials coupled with nonlinearity and strain softening. Formulation of such complicated phenomena is a difficult problem till now. The present model is based on the component assembling concept, where constitutive equations of materials are formed by means of assembling two kinds of components' response functions. These two kinds of components, orientational and volumetric ones, are abstracted based on pair-functional potentials and the Cauchy - Born rule. Moreover, macroscopic damage of quasi-brittle materials can be reflected by stiffness changing of orientational components, which represent grouped atomic bonds along discrete directions. Simultaneously, anisotropic characters are captured by the naturally directional property of the orientational component. Initial damage surface in the axial-shear stress space is calculated and analyzed. Furthermore, the anisotropic quasi-brittle damage behaviors of concrete under uniaxial, proportional, and nonproportional combined loading are analyzed to elucidate the utility and limitations of the present damage model. The numerical results show good agreement with the experimental data and predicted results of the classical anisotropic damage models.

Study of the damage-induced anisotropy of quasi-brittle materials using the component assembling model

Damage-induced anisotropy of quasi-brittle materials is investigated using component assembling model in this study. Damage-induced anisotropy is one significant character of quasi-brittle materials coupled with nonlinearity and strain softening. Formulation of such complicated phenomena is a difficult problem till now. The present model is based on the component assembling concept, where constitutive equations of materials are formed by means of assembling two kinds of components' response functions. These two kinds of components, orientational and volumetric ones, are abstracted based on pair-functional potentials and the Cauchy - Born rule. Moreover, macroscopic damage of quasi-brittle materials can be reflected by stiffness changing of orientational components, which represent grouped atomic bonds along discrete directions. Simultaneously, anisotropic characters are captured by the naturally directional property of the orientational component. Initial damage surface in the axial-shear stress space is calculated and analyzed. Furthermore, the anisotropic quasi-brittle damage behaviors of concrete under uniaxial, proportional, and nonproportional combined loading are analyzed to elucidate the utility and limitations of the present damage model. The numerical results show good agreement with the experimental data and predicted results of the classical anisotropic damage models.

The elasto-damage theory of the components assembling model

The potential energy in materials is well approximated by pair functional which is composed of pair potentials and embedding energy. During calculating material potential energy, the orientational component and the volumetric component are derived respectively from pair potentials and embedding energy. The sum of energy of all these two kinds of components is the material potential. No matter how microstructures change, damage or fracture, at the most level, they are all the changing and breaking atomic bonds. As an abstract of atomic bonds, these components change their stiffness during damaging. Material constitutive equations have been formulated by means of assembling all components' response functions. This material model is called the component assembling model. Theoretical analysis and numerical computing indicate that the proposed model has the capacity of reproducing some results satisfactorily, with the advantages of great conceptual simplicity, physical explicitness, and intrinsic induced anisotropy, etc.