Assessment of pelvic floor by three-dimensional-ultrasound in primiparous women according to delivery mode: initial experience from a single reference service in Brazil

PURPOSE: To evaluate changes to the pelvic floor of primiparous women with different delivery modes, using three-dimensional ultrasound. METHODS: A prospective cross-sectional study on 35 primiparae divided into groups according to the delivery mode: elective cesarean delivery (n=10), vaginal delivery (n=16), and forceps delivery (n=9). Three-dimensional ultrasound on the pelvic floor was performed on the second postpartum day with the patient in a resting position. A convex volumetric transducer (RAB4-8L) was used, in contact with the large labia, with the patient in the gynecological position. Biometric measurements of the urogenital hiatus were taken in the axial plane on images in the rendering mode, in order to assess the area, anteroposterior and transverse diameters, average thickness, and avulsion of the levator ani muscle. Differences between groups were evaluated by determining the mean differences and their respective 95% confidence intervals. The proportions of levator ani muscle avulsion were compared between elective cesarean section and vaginal birth using Fisher's exact test. RESULTS: The mean areas of the urogenital hiatus in the cases of vaginal and forceps deliveries were 17.0 and 20.1 cm², respectively, versus 12.4 cm² in the Control Group (elective cesarean). Avulsion of the levator ani muscle was observed in women who underwent vaginal delivery (3/25), however there was no statistically significant difference between cesarean section and vaginal delivery groups (p=0.5). CONCLUSION: Transperineal three-dimensional ultrasound was useful for assessing the pelvic floor of primiparous women, by allowing pelvic morphological changes to be differentiated according to the delivery mode.

Delivery mode and efficacy of BMP-2 in association with implants

Bone healing may be improved in implant patients by the administration of osteogenic agents, such as bone morphogenetic protein 2 (BMP-2). But the efficacy of BMP-2 depends upon its mode of application. We hypothesized that BMP-2 is capable of a higher osteogenic efficacy when delivered physiologically, viz., when incorporated into a calcium-phosphate carrier that mimics mineralized bone matrix, than when administered via simple pharmacological modes, such as by adsorption onto a carrier surface. Using an ectopic rat model, we compared the osteoinductive efficacies of calcium-phosphate implant-coatings bearing either incorporated, adsorbed, or incorporated and adsorbed BMP-2. When adsorbed directly onto the naked implant surface, BMP-2 was not osteogenic. When adsorbed onto a calcium-phosphate coating, it was osteoinductive, but not highly efficacious. When BMP-2 was incorporated into calcium-phosphate coatings, it was a potent bone-inducer, whose efficacy was compromised, not potentiated, by the additional deposition of an adsorbed pool.

Quality of outsourced IT services in different degrees of offshoring

The Finnish IT service market can be described to be at a turning point. The clients are ever more interested on services delivered from offshore but certain issues keep them cautious. There is a lack of knowledge on what implications different degrees of offshoring have on service quality. Although there has been significant amount of research related to both service quality and offshoring, several questions are unanswered, terminology remains ambivalent and research findings are inconsistent. The study focuses on the interception of these two fields. The purpose of the study is to learn more about service quality in different degrees of offshoring. At the same time it aims to contribute in narrowing the research gaps. The degree of offshoring can be divided to three delivery modes: onshore, collaboration and offshore. The study takes a mixed method approach where the quantitative and qualitative phases are executed sequentially. First data was gathered from incident management system. Resolution time in different degrees of offshoring was analyzed with Kruskal-Wallis and Jonckheere-Terpstra tests. In addition, the compliance to Service Level Agreement (SLA) in different degrees of offshoring was examined with cross tabulation. The findings from the quantitative analysis suggested that the services with offshore delivery mode perform the best in terms of promptness and SLA compliance. However, several issues were found related to the data and for that reason, the findings should be considered with prudence. After the quantitative analysis, the study moved on to qualitative data collection and analysis. Four semi-structured interviews were held. The interviewees represented different organizational roles and had experiences from different delivery modes. Several themes were covered in the interviews, including: the concept of quality, the subjectivity or objectivity of service quality, expectations and prejudices towards offshore deliveries, quality produced in India, proactiveness of offshore resources, quality indicators and the scarcity of collaborative deliveries. Several conclusions can be made from the empirical research. Firstly, the quality in different delivery modes was found to be controversial topic. Secondly, in the collaborative delivery covered in the study, the way tasks and resources are allocated seem to cause issues. On the other hand inexperienced offshore resources are assigned to the delivery and on the other hand only routine tasks are assigned to the resources. This creates a self-enforcing loop that results in low motivation, low ownership and high employee turnover in offshore. Nevertheless, this issue is not characteristic only to collaborative deliveries but rather allocation of tasks and resources. Moreover, prejudices were identified to affect the perceived service quality in non-predictable way. The research also demonstrated that there is a need in focal company for further data gathering and analysis.

Verification of the clinical implementation of the respiratory gated beam delivery technique with synchrotron-based proton irradiation

The clinical advantage for protons over conventional high-energy x-rays stems from their unique depth-dose distribution, which delivers essentially no dose beyond the end of range. In order to achieve it, accurate localization of the tumor volume relative to the proton beam is necessary. For cases where the tumor moves with respiration, the resultant dose distribution is sensitive to such motion. One way to reduce uncertainty caused by respiratory motion is to use gated beam delivery. The main goal of this dissertation is to evaluate the respiratory gating technique in both passive scattering and scanning delivery mode. Our hypothesis for the study was that optimization of the parameters of synchrotron operation and respiratory gating can lead to greater efficiency and accuracy of respiratory gating for all modes of synchrotron-based proton treatment delivery. The hypothesis is tested in two specific aims. The specific aim #1 is to assess the efficiency of respiratory-gated proton beam delivery and optimize the synchrotron operations for the gated proton therapy. A simulation study was performed and introduced an efficient synchrotron operation pattern, called variable Tcyc. In addition, the simulation study estimated the efficiency in the respiratory gated scanning beam delivery mode as well. The specific aim #2 is to assess the accuracy of beam delivery in respiratory-gated proton therapy. The simulation study was extended to the passive scattering mode to estimate the quality of pulsed beam delivery to the residual motion for several synchrotron operation patterns with the gating technique. The results showed that variable Tcyc operation can offer good reproducible beam delivery to the residual motion at a certain phase of the motion. For respiratory gated scanning beam delivery, the impact of motion on the dose distributions by scanned beams was investigated by measurement. The results showed the threshold for motion for a variety of scan patterns and the proper number of paintings for normal and respiratory gated beam deliveries. The results of specific aims 1 and 2 provided supporting data for implementation of the respiratory gating beam delivery technique into both passive and scanning modes and the validation of the hypothesis.

A practical guide to exercise training for heart failure patients

Background: Exercise training has been shown to improve exercise capacity in patients with heart failure. We sought to examine the optimal strategy of exercise training for patients with heart failure. Methods: Review of the published data on the characteristics of the training program, with comparison of physiologic markers of exercise capacity in heart failure patients and healthy individuals and comparison of the change in these characteristics after all exercise training program. Results: Many factors, including the duration, supervision, and venue of exercise training; the volume of working muscle; the delivery mode (eg, continuous vs. intermittent exercise), training intensity; and the concurrent effects of medical treatments may influence the results of exercise training in heart failure. Starting in an individually prescribed and safely monitored hospital-based program, followed by progression to an ongoing and progressive home program of exercise appears to be the best solution to the barriers of anxiety, adherence, and ease of access encountered by the heart failure patient. Conclusions: Various exercise training programs have been shown to improve exercise capacity and symptom status in heart failure, but these improvements may only be preserved with an ongoing maintenance program.

Cross-layer optimizations for multimedia distribution over Wireless Multimedia Sensor Networks and Flying Ad-Hoc Networks with quality of experience support

The proliferation of multimedia content and the demand for new audio or video services have fostered the development of a new era based on multimedia information, which allowed the evolution of Wireless Multimedia Sensor Networks (WMSNs) and also Flying Ad-Hoc Networks (FANETs). In this way, live multimedia services require realtime video transmissions with a low frame loss rate, tolerable end-to-end delay, and jitter to support video dissemination with Quality of Experience (QoE) support. Hence, a key principle in a QoE-aware approach is the transmission of high priority frames (protect them) with a minimum packet loss ratio, as well as network overhead. Moreover, multimedia content must be transmitted from a given source to the destination via intermediate nodes with high reliability in a large scale scenario. The routing service must cope with dynamic topologies caused by node failure or mobility, as well as wireless channel changes, in order to continue to operate despite dynamic topologies during multimedia transmission. Finally, understanding user satisfaction on watching a video sequence is becoming a key requirement for delivery of multimedia content with QoE support. With this goal in mind, solutions involving multimedia transmissions must take into account the video characteristics to improve video quality delivery. The main research contributions of this thesis are driven by the research question how to provide multimedia distribution with high energy-efficiency, reliability, robustness, scalability, and QoE support over wireless ad hoc networks. The thesis addresses several problem domains with contributions on different layers of the communication stack. At the application layer, we introduce a QoE-aware packet redundancy mechanism to reduce the impact of the unreliable and lossy nature of wireless environment to disseminate live multimedia content. At the network layer, we introduce two routing protocols, namely video-aware Multi-hop and multi-path hierarchical routing protocol for Efficient VIdeo transmission for static WMSN scenarios (MEVI), and cross-layer link quality and geographical-aware beaconless OR protocol for multimedia FANET scenarios (XLinGO). Both protocols enable multimedia dissemination with energy-efficiency, reliability and QoE support. This is achieved by combining multiple cross-layer metrics for routing decision in order to establish reliable routes.

Changing the Face of Traditional Education

At large, research universities, a common approach for teaching hundreds of undergraduate students at one time is the traditional, large, lecture-based course. Trends indicate that over the next decade there will be an increase in the number of large, campus courses being offered as well as larger enrollments in courses currently offered. As universities investigate alternative means to accommodate more students and their learning needs, Web-based instruction provides an attractive delivery mode for teaching large, on-campus courses. This article explores a theoretical approach regarding how Web-based instruction can be designed and developed to provide quality education for traditional, on-campus, undergraduate students. The academic debate over the merit of Web-based instruction for traditional, on-campus students has not been resolved. This study identifies and discusses instructional design theory for adapting a large, lecture-based course to the Web.

Cross-Layer Optimizations for Multimedia Distribution over Wireless Multimedia Sensor Networks and Flying Ad-Hoc Networks with Quality of Experience Support

The proliferation of multimedia content and the demand for new audio or video services have fostered the development of a new era based on multimedia information, which allowed the evolution of Wireless Multimedia Sensor Networks (WMSNs) and also Flying Ad-Hoc Networks (FANETs). In this way, live multimedia services require real-time video transmissions with a low frame loss rate, tolerable end-to-end delay, and jitter to support video dissemination with Quality of Experience (QoE) support. Hence, a key principle in a QoE-aware approach is the transmission of high priority frames (protect them) with a minimum packet loss ratio, as well as network overhead. Moreover, multimedia content must be transmitted from a given source to the destination via intermediate nodes with high reliability in a large scale scenario. The routing service must cope with dynamic topologies caused by node failure or mobility, as well as wireless channel changes, in order to continue to operate despite dynamic topologies during multimedia transmission. Finally, understanding user satisfaction on watching a video sequence is becoming a key requirement for delivery of multimedia content with QoE support. With this goal in mind, solutions involving multimedia transmissions must take into account the video characteristics to improve video quality delivery. The main research contributions of this thesis are driven by the research question how to provide multimedia distribution with high energy-efficiency, reliability, robustness, scalability, and QoE support over wireless ad hoc networks. The thesis addresses several problem domains with contributions on different layers of the communication stack. At the application layer, we introduce a QoE-aware packet redundancy mechanism to reduce the impact of the unreliable and lossy nature of wireless environment to disseminate live multimedia content. At the network layer, we introduce two routing protocols, namely video-aware Multi-hop and multi-path hierarchical routing protocol for Efficient VIdeo transmission for static WMSN scenarios (MEVI), and cross-layer link quality and geographical-aware beaconless OR protocol for multimedia FANET scenarios (XLinGO). Both protocols enable multimedia dissemination with energy-efficiency, reliability and QoE support. This is achieved by combining multiple cross-layer metrics for routing decision in order to establish reliable routes.

Ultrasonography in pregnant women with antiphospholipid syndrome using salicylic acid and heparin

The objective of the present study was to evaluate fetal biometry, Doppler values, and perinatal outcomes in pregnant women with antiphospholipid syndrome treated with acetylsalicylic acid and heparin. Twenty-five pregnant women with antiphospholipid syndrome using 100 mg/day acetylsalicylic acid and 5,000 IU heparin every 12 h were evaluated in this prospective observational study. Ultrasonography was performed between 24 and 38 weeks of gestational age to assess estimated fetal weight, placental thickness, amniotic fluid index, fetal biophysical profile and Doppler evaluation of maternal uterine arteries, and fetal middle cerebral and umbilical arteries. Data regarding Apgar score, gender, delivery mode, and birth weight and length were recorded after birth. The observed values for ultrasonographic assessment and perinatal outcomes were not very different from the expected values for normal pregnancies. The birth weight was 2863.3 +/- A 737.7 g (mean +/- A SD) and length was 46.8 +/- A 4.2 cm. Only one newborn (4%) had the 1-min Apgar score < 7 and all had the 5-min Apgar score > 7. Gestational and perinatal evaluation of pregnant women with antiphospholipid syndrome using both acetylsalicylic acid and heparin was reassuring.

Estudo empírico da caracterização da selecção de fornecedores

O problema de selecção de fornecedores/parceiros é uma parte integrante e importante nas empresas que se propõem a um desempenho competitivo e lucrativo na sua área de actividade. A escolha do melhor fornecedor/parceiro passa na maior parte da vezes por fazer uma análise cuidada dos factores que podem influenciar positiva ou negativamente essa escolha. Desde cedo este problema tem vindo a ser alvo de inúmeros estudos, estudos esses que se focam essencialmente nos critérios a considerar e nas metodologias a adoptar para optimizar a escolha dos parceiros. De entre os vários estudos efectuados, muitos são os que consideram como critérios chave o custo do produto, a qualidade, a entrega e a reputação da empresa fornecedora. Ainda assim, há muitos outros que são referidos e que na sua maioria se apresentam como subcritérios. No âmbito deste trabalho, foram identificados cinco grandes critérios, Qualidade, Sistema Financeiro, Sinergias, Custo e Sistema Produtivo. Dentro desses critérios, sentiu-se a necessidade de incluir alguns subcritérios pelo que, cada um dos critérios chave apresenta cinco subcritérios. Identificados os critérios, foi necessário perceber de que forma são aplicados e que modelos são utilizados para se poder tirar o melhor partido das informações. Sabendo que existem modelos que privilegiam a programação matemática e outros que fazem uso de ponderações lineares para se identificar o melhor fornecedor, foi realizado um inquérito e contactadas empresas por forma a perceber quais os factores que mais peso tinham nas suas decisões de escolha de parceiros. Interpretados os resultados e tratados os dados foi adoptado um modelo de ponderação linear para traduzir a importância de cada um dos factores. O modelo proposto apresenta uma estrutura hierárquica e pode ser aplicado com o método AHP de Saaty ou o método de Análise de Valor. Este modelo permite escolher a ou as alternativas que melhor se adequam aos requisitos das empresas.

Ohutlevyosien valmistuskustannukset ja kansainvälinen hankintastrategia

Työn tarkoituksena on kehittää hankinnan päätöksentekoa tukeva ohutlevyosien valmistuskustannusten laskentamenetelmä toimintolaskentaan pohjautuen. Laskentamenetelmä koostuu valmistukseen kuluvan ajan laskennassa käytettävistä funktioista sekä konetuntihinnoista. Hankintatoimen päätöksistä käsitellään toimittajanvalintaa, jossa yhtenä vaihtoehtona on hankkiminen Kiinasta. Toimittajanvalinnan kriteereitä ovat tällöin hankintahinnan lisäksi kuljetuskustannukset, laatu sekä toimitusvarmuus. Myös kansainvälisen hankinnan Kiinasta erityispiirteitä käsitellään. Hankkiminen Kiinasta koetaan vielä melko ongelmallisena etenkin laadun ja toimitusvarmuuden osalta. Erityisen huomioitavaa on, että hankintahintojen alhaisuus on osakohtaista. Suurin riski hankinnan kannattavuudelle aiheutuu valuuttakursseista. Osto-organisaation yhteistyötä alihankkijoiden sekä muiden osastojen kanssa parantamalla voidaan välttää hankittavien ohutlevyosien laatuongelmia. Suomalaisten alihankkijoiden kanssa kustannuslaskentamallia avoimeen hinnoitteluun soveltamalla hankintakustannuksia voidaan alentaa.

Triplet pregnancies: perinatal outcome evolution

PURPOSE: To evaluate the obstetric and perinatal outcomes evolution of triplet pregnancies.METHODS: A prospective observational study was conducted in triplet pregnancies delivered over 16 years in a tertiary obstetric center with differentiated perinatal support. Evaluation of demographic factors, obstetric complications, gestational age at delivery, mode of delivery, birth weight and immediate newborn outcome were done over a 16 years period. A global characterization of the sample was performed considering the listed parameters. Variables were categorized in three groups according to year of occurrence: 1996-2000, 2001-2006, 2007-2011, and all parameters were compared.RESULTS: Of the 33 triplets included, 72.7% resulted from induced pregnancies. All except one patient received prenatal corticosteroids and five received tocolytics. All women delivered prenatally and no significant differences were seen in the mean gestational age at delivery or birth weight towards time. There were three intrauterine fetal deaths. Neonatal immediate outcomes were not significantly different over the years.CONCLUSION: Despite remarkable progresses in perinatal and neonatal cares, no noticeable impact in triplet gestations' outcomes was seen, sustaining that triplets should be avoided due to their great risk of prematurity and neonatal morbidities, either by limiting the numbers of embryos transferred or by fetal reduction.

Do induced twin pregnancies influence the obstetric and neonatal results of multiple births born before 32 weeks? Comparison to spontaneous gestation

PURPOSE: To compare obstetric outcomes of induced preterm twin births (under 32 weeks gestation) with those spontaneously conceived. METHODS: Prospective study of twin pregnancies (25 induced and 157 spontaneously conceived) developed over a period of 16 years in a tertiary obstetric center. Demographic factors, obstetric complications, gestational age at delivery, mode of delivery, birth weight and immediate newborn outcome were compared. RESULTS: The analysis of obstetrical complications concerning urinary or other infections, hypertensive disorders of pregnancy, gestational diabetes, fetal malformations, intrauterine fetal death, intrauterine growth restriction and intrauterine discordant growth reveal no significant statistical differences between the two groups. First trimester bleeding was higher in the induced group (24 versus 8.3%, p=0.029). The cesarean delivery rate was 52.2% in spontaneous gestations and 64% in induced gestations. Gestational age at delivery, birth weight, Apgar scores at first and fifth minutes, admissions to Neonatal Intensive Care Unit and puerperal complications show no statistically significant differences between the two groups. These results were independent of chorionicity and induction method. CONCLUSION: The mode of conception did not influence obstetric and neonatal outcomes. Although induced pregnancies have higher risk of first trimester bleeding, significant differences were not observed regarding other obstetric and puerperal complications and neonatal results.