Desenvolvimento de estrutura para purificação de água potável, através da irradiação de UV com lâmpadas fluorescentes especiais

Pós-graduação em Engenharia Elétrica - FEIS

Qualidade da água no município de Lençóis Paulista-SP e Comparação entre métodos de purificação de água

The purpose of a water treatment plant (WTP) is to provide quality water to the population in the municipality where it is operate, being directly linked to the health of the community. The efficiency of a water treatment is directly related to the quality and reliability of the methods used. The analytical results of any laboratory test or calibration is a critical process for any company today. A tool used to assist in a quality management system process is ISO/IEC 17025:2005. Given the above, the objective of this study was to evaluate the performance of an ETA located in Lençóis Paulista-SP, using the analytical results obtained by physical, chemical and microbiological determinations in the period 1-30 October 2015. Such determinations are grounded in compliance with current Ordinance 2914 the Ministry of Health and the Quality Management System, which is required for all laboratories carrying out laboratory tests for control and surveillance of water quality for human consumption

Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Variação da qualidade da água de chuva no início da precipitação

One of the most evident and actual concern, not only in the scientific means, but also of the public knowledge in general, is the lack problem of the potable water, that come increasing more each time, motivated mainly for the po llution of the sources, the bad use of the water and the increase of the population. In such a way, the necessity of looking for new water sources and the development of techniques to use sources minus explored is becoming even more important and urgent. T he rainwater comes being used since a long time like a supplying source, but, due the few knowledge of its characteristics, the generated preconception and the discrimination around its consumption and to the bad use of the technique of collection and stor age, it comes being little used, wasting consequently a significant parcel of this source. Trying to develop the knowing of some characteristics of the rainwater, the present work looks for to define the curve of variation of the quality of the rainwater i n three points with distinct characteristics of the city of Natal -RN, in the course of the precipitation, in some situations of time and space. For describe the curve of variation of the water s quality, some variables must be analyzed, and to be identifie d when they modify themselves in the endurance of rain, showing in which moment the purification of the water is more or less quickly. The pH, the Turbidity and the Electric Conductivity can be related with a big part of the physicist -chemistries variables found in the water and, like its analyses don't spend any material, they have easy access and measurement. The present work analyzes the curves of decline of these three variables, in three points with distinct characteristics in the city of Natal -RN, being these points: one next to the sea, another one in region with great buildings concentration and the last point in a less polluted area. For the studied region, it was during the five first millimeters of rain that occurs the biggest reduction of the exi sting impurities in the atmosphere, mainly between the first and the second millimeter, and after the five first millimeters the values of the variables stabilize. With exception of the University Campus, where initially the rainwater already has very good quality, the values of Turbidity and Electric Conductivity suffer a brusque reduction after the first millimeter of rain

Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Síntese, caracterização e estudo de atividade biológica de complexos de prata(I) contendo ligantes baseados na 1,10-fenantrolina e tiouréia

Pós-graduação em Química - IQ

Bioecology and conservation of Duck Mussel Species (Anodonta anatina L., 1758) in Northeastern Portugal

Freshwater mussel (Mollusca, Bivalvia, Unionoida) populations are one of the most endangered faunistic groups. Mussels play an important role in the functioning of aquatic ecosystems, because they are responsible for the filtration and purification of water. They have a complex life cycle, with a parasitic larvae and usually limited host fish species. The real status of these populations is still poorly understood worldwide. The objectives of the present work were the study of bioecology of duck mussel (Anodonta anatina L.) populations of Tua Basin (NE Portugal). It was made the characterization of the ecological status of Rabaçal, Tuela and Tua Rivers, selecting 15 sampling sites, equally distributed by the three rivers. Samplings were made in the winter of 2016, and several physico-chemical water parameters measured and two habitat quality indexes calculated (GQC and QBR indexes). Benthic macroinvertebrate communities were sampled based on the protocols established by the Water Framework Directive. Host fish populations for duck mussel were determined in laboratorial conditions, testing several native and exotic fish species. The results showed that several water quality variables (e.g. dissolved oxygen, conductivity, pH, total dissolved solids, and nutrients) can be used for the classification of river typology. Other responsive metrics were also determined to identify environmental degradation. For instances, hydromorphological conditions (GQC and QBR indexes) and biota related metrics (e.g. composition, distribution, abundance, diversity of invertebrate communities) contributed to the evaluation of the ecological integrity. The upper zones of Rabaçal and Tuela rivers were classified with excellent and good ecological integrity, while less quality was found in downstream zones. The host fish tests showed that only native species are effective hosts, essential for the conservation purposes of this mussel species. Threats, like pollution, sedimentation and river regularization (3 big dams are in construction or in filling phase), are the main cause of habitat loss for native mussel and fish populations in the future. Rehabilitation and mitigation measures are essential for these lotic ecosystems in order to preserve the prioritary habitats and the native species heavily threatened.

Estudo do equilíbrio líquido-líquido e da estabilidade de sistemas envolvendo biodiesel, álcoois e água

O estudo da estabilidade de emulsões de biocombustíveis destaca-se, dentre outros aspectos, pela necessidade de identificação das características destas. Esta necessidade reforça-se pela dificuldade de detecção de biodiesel e suas misturas quando estão fora de especificação, além de se aplicar aos processos de separação e purificação do biodiesel após a transesterificação. O entendimento deste problema poderá ser alcançado a partir de estudos de estabilidade associados aos modelos termodinâmicos de equilíbrio líquido-líquido (modelo NRTL) em sistemas ternários, que serão a base da modelagem proposta neste trabalho. O levantamento de dados envolve técnicas de observação direta em titulação, e ensaios de estabilidade e tensiometria, com algumas alterações das técnicas clássicas. Desta forma, o objetivo principal do trabalho é propor uma maneira de identificar e caracterizar as interfaces das emulsões formadas e estudar a estabilidade das fases envolvidas. Além disso, estuda-se a introdução de alcoóis como agentes tensoativos para viabilizar a utilização de misturas de combustíveis, mesmo na região de mais de uma fase. Para o desenvolvimento do trabalho, emulsões envolvendo os constituintes básicos serão combinadas entre si em diferentes proporções. A etapa inicial constitui-se de um mapeamento das misturas e proporções que formam as emulsões, baseadas nas curvas de equilíbrio. Em seguida, faz-se o estudo de caracterização e estabilidade destes sistemas. Com estas informações é possível mapear o sentido de incremento de tensão na interface e instabilidade da separação de fases das emulsões em relação aos diagramas ternários correspondentes. Por fim, propõe-se uma estratégia para estimar os parâmetros termodinâmicos do NRTL para as espécies presentes nos sistemas estudados e prever o comportamento dos mesmos e de sistemas similares. Este modelo matemático proposto tem como objetivo complementar a técnica experimental adotada para construção das curvas de equilíbrio, sendo bem sucedido

Purificação da glicerina bruta obtida a partir da transesterificação do óleo de algodão

The crude glycerine is a raw material that can be used in a wide variety of products. Even with all the impurities inherent in the process of being obtained, the crude glycerin is already in a marketable product. However, the market is much more favorable to the commercialization of purified glycerine. The glycerin is a byproduct gotten from the process of transesterification of waste oils and fats in the production of biodiesel. More recently, the deployment of the new Federal Law of Brazil, related to the implementation of energy resources, forces, from 2008, the increase of 2% biodiesel in diesel common with prospects for 5% (B5). Therefore, it is indispensable that new routes of purification as well as new markets are developed. The objective of this work was to purify, through ion exchange, the crude glycerin, obtained from the reaction of transesterification of cottonseed oil. The cottonseed oil was characterized as the fatty acid composition and physical-chemical properties. The process of ion exchange was conducted in batch. In this process were used strong cation, low anion resins and a mixed resin used to de-ionize water. The purified glycerin was characterized as the content of metals. Tests were performed with activated charcoal adsorption, and for this, it was made tests of time contact with coal as well as quantity of coal used. The time of activation, the amount of the activation solution, the contact time of the glycerol solution in resins, the amount and type of resin applied were evaluated. Considering the analysis made with activated charcoal, when the glycerin solution was treated using the resins individually it was observed that in the conditions for treatment with 10 g of resin, 5 hours of contact with each resin and 50 mL of glycerin solution, its conductivity decreased to a cationic resin, increased to the anionic resin and had a variable value with respect to resin mixed. In the treatment in series, there was a constant decrease in the conductivity of the solution of glycerin. Considering two types of treatment, in series and individually, the content of glycerol in glycerin pre-purified solution with the different resins varied from 12,46 to 29.51% (diluted solution). In analysis performed without the use of activated charcoal, the behavior of the conductivity of the solution of glycerin were similar to results for treatment with activated charcoal, both in series as individually. The solution of glycerin pre-purified had a glycerol content varying from 8.3 to 25.7% (diluted solution). In relation to pH, it had a behavior in accordance with the expected: acid for the glycerin solution treated with cationic resin, basic when the glycerin solution was treated with the anionic resin and neutral when treated with the mixed resin, independent of the kind of procedure used (with or without coal, resins individually or in series). In relation to the color of the glycerin pre-purified solution, the resin that showed the best result was the anionic (colorless), however this does not mean that the solution is more in pure glycerol. The chromatographic analysis of the solutions obtained after the passage through the resins indicated that the treatment was effective by the presence of only one component (glycerol), not considering the solvent of the analysis

Avaliação oxidativa do biodiesel de pinhão manso em diferentes processos de purificação

The objective of this study was to analyze the oxidative stability of biodiesel from jatropha obtained from different purification processes, three wet processes with different drying (in a vacuum oven, conventional oven and in anhydrous sodium sulfate) and dry (purification with magnesium silicate adsorbent). Raw materials of different qualities (jatropha crop ancient and recent crop) were used. The Jatropha oil was extracted by mechanical extraction and refined. The Jatropha biodiesel was obtained by the transesterification reaction in ethyl route using alkaline catalysis. The biodiesel samples were characterized by analysis of water content, carbon residue, Absorption Spectroscopy in the Infrared Region and Thermogravimetry. Thermogravimetric curves of purified PUsv* PUsq* and had higher initial decomposition temperatures, indicating that the most stable, followed by samples PU* and PUSC*. Besides the sample SP* is a smaller initial temperature, confirming the sample without purification to be less thermally stable. The percentage mass loss of the purified samples showed conversion of about 98.5%. The results of analyzes carbon residue and infrared suggested that contamination by impurities is the main factor for decreased oxidative stability of biodiesel. The oxidative stability was assessed from periodic monitoring, using the techniques of Rancimat, peroxide index, acid value and Pressurized Differential Scanning Calorimetry. Samples of biodiesel from jatropha which showed better oxidative stability were of the best quality raw material and wet scrubbing: PUsq* with dry chemical, using anhydrous sodium sulfate and PUsv* with vacuum drying, which had oxidative stability 6 hours in Rancimat time 0 days, within the limits established by the Technical Regulation No. 4/2012 of the ANP, without the addition of antioxidant, suggesting that these procedures the least influence on the oxidative stability of biodiesel

Distribuição de Cr, Ni, Cu, Cd e Pb em frações húmicas de diferentes tamanhos moleculares extraídas de amostras de água e de sedimentos do reservatório de captação de água superficial Anhumas - Araraquara-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise econômica de dois sistemas naturais de tratamento de água residuária na suinocultura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desinfecção da água utilizando aquecimento solar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA