Produção da figueira submetida a diferentes épocas de poda e irrigação

O trabalho teve como objetivo avaliar diferentes épocas de poda, correspondentes aos meses de julho, agosto, setembro e outubro dos anos de 2004/05 e 2005/06, com e sem o uso de irrigação, em figueira 'Roxo de Valinhos', no município de Botucatu-SP. Para atingir tal objetivo, adotou-se o delineamento experimental em parcelas subdivididas, com 5 repetições em blocos, onde as parcelas corresponderam aos tratamentos com e sem irrigação, e as subparcelas foram constituídas pelas podas realizadas nos quatro meses do ano. Foram avaliadas características de produção e alguns atributos de qualidade, que serviram para indicar a necessidade do uso de irrigação. Os resultados obtidos permitiram concluir que, na avaliação do desdobramento da interação entre épocas de poda e irrigação complementar, o mês de agosto, com o uso de irrigação complementar, foi o mais favorável para a realização da poda da figueira, proporcionando as maiores produções médias verificadas no ensaio, tanto no ciclo agrícola de 2004/05 (3.513,8 g planta-1), quanto em 2005/06 (4.110,7 g planta-1). em condições não-irrigadas, não houve diferença estatística entre os meses de julho, agosto e setembro de 2004/05 e entre julho e agosto de 2005/06.

Épocas de poda e uso da irrigação em figueira 'roxo de valinhos' na região de Botucatu, SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Épocas de poda na produção de figos verdes 'Roxo de Valinhos' em sistema orgânico na região oeste do Paraná

O objetivo deste trabalho foi verificar o efeito da época de poda sobre o crescimento e a produção da figueira 'Roxo de Valinhos', cultivada na região oeste do Paraná, sob sistema orgânico, para a produção de figos-verdes. O delineamento utilizado foi em blocos ao acaso, com quatro blocos e seis tratamentos - épocas de poda: abril, maio, junho, julho, agosto e setembro. em cada parcela, constituída de três plantas úteis, foram coletados dados no ciclo de produção de 2007/2008. As variáveis fenológicas, comprimento final médio dos ramos, produção por mês (número e massa média de frutos por planta e produtividade estimada, entre os meses de outubro a fevereiro), produção acumulada, produtividade estimada acumulada e massa fresca média dos frutos. Houve diferenças na produção entre as épocas de poda; plantas podadas em julho e agosto apresentaram as maiores produções, escalonadas entre os meses de dezembro a fevereiro, com pico de produção em janeiro.

Avaliação de diferentes espaçamentos, altura e épocas de poda na cultura do pinhão manso na região de Selvíria-MS

Pós-graduação em Agronomia - FEIS

Exigência térmica e produtividade da amoreira-preta em função das épocas de poda

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

ESTIMATING TEMPORAL ASSOCIATIONS IN ELECTROCORTICOGRAPHIC (ECoG) TIME SERIES WITH FIRST ORDER PRUNING

Granger causality (GC) is a statistical technique used to estimate temporal associations in multivariate time series. Many applications and extensions of GC have been proposed since its formulation by Granger in 1969. Here we control for potentially mediating or confounding associations between time series in the context of event-related electrocorticographic (ECoG) time series. A pruning approach to remove spurious connections and simultaneously reduce the required number of estimations to fit the effective connectivity graph is proposed. Additionally, we consider the potential of adjusted GC applied to independent components as a method to explore temporal relationships between underlying source signals. Both approaches overcome limitations encountered when estimating many parameters in multivariate time-series data, an increasingly common predicament in today's brain mapping studies.

A Radial Basis Function Approach to Financial Time Series Analysis

Nonlinear multivariate statistical techniques on fast computers offer the potential to capture more of the dynamics of the high dimensional, noisy systems underlying financial markets than traditional models, while making fewer restrictive assumptions. This thesis presents a collection of practical techniques to address important estimation and confidence issues for Radial Basis Function networks arising from such a data driven approach, including efficient methods for parameter estimation and pruning, a pointwise prediction error estimator, and a methodology for controlling the "data mining'' problem. Novel applications in the finance area are described, including customized, adaptive option pricing and stock price prediction.

Accurate and Efficient Gesture Spotting via Pruning and Subgesture Reasoning

Gesture spotting is the challenging task of locating the start and end frames of the video stream that correspond to a gesture of interest, while at the same time rejecting non-gesture motion patterns. This paper proposes a new gesture spotting and recognition algorithm that is based on the continuous dynamic programming (CDP) algorithm, and runs in real-time. To make gesture spotting efficient a pruning method is proposed that allows the system to evaluate a relatively small number of hypotheses compared to CDP. Pruning is implemented by a set of model-dependent classifiers, that are learned from training examples. To make gesture spotting more accurate a subgesture reasoning process is proposed that models the fact that some gesture models can falsely match parts of other longer gestures. In our experiments, the proposed method with pruning and subgesture modeling is an order of magnitude faster and 18% more accurate compared to the original CDP algorithm.

An Exact Schedulability Test for Global FP Using State Space Pruning

Presented at 23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France.

Rooting cuttings of Syringa vulgaris cv. Charles Joly and Corylus avellana cv. Aurea: the influence of stock plant pruning and shoot growth

The relationship between shoot growth and rooting was examined in two, 'difficult-to root' amenity trees, Syringa vulgaris L. cv. Charles Joly and Corylus avellana L. cv. Aurea. A range of treatments reflecting severity of pruning was imposed on field-grown stock prior to bud break. To minimise variation due to the numbers of buds that developed under different treatments, bud number was restricted to 30 per plant. Leafy cuttings were harvested at different stages of the active growth phase of each species. With Syringa, rooting decreased with later harvests, but loss of rooting potential was delayed in cuttings collected from the most severe pruning treatment. Rooting potential was associated with the extent of post-excision shoot growth on the cutting but regression analyses indicated that this relationship could not entirely explain the loss of rooting with time, nor the effects due to pruning. Similarly, in Corylus rooting was promoted by severe pruning, but the relationship between apical growth on the cutting and rooting was weaker than in Syringa, and only at the last harvest did growth play a critical role in determining rooting. Another unusual factor of the last harvest of Corylus was a bimodal distribution of roots per cutting, with very few rooted cuttings having less than five roots. This implies that, for this harvest at least, the potential of an individual cutting to root is probably not limited by the number of potential rooting sites.

Search space pruning and global optimisation of Multiple Gravity Assist spacecraft trajectories

We introduce and describe the Multiple Gravity Assist problem, a global optimisation problem that is of great interest in the design of spacecraft and their trajectories. We discuss its formalization and we show, in one particular problem instance, the performance of selected state of the art heuristic global optimisation algorithms. A deterministic search space pruning algorithm is then developed and its polynomial time and space complexity derived. The algorithm is shown to achieve search space reductions of greater than six orders of magnitude, thus reducing significantly the complexity of the subsequent optimisation.

Optimum-Path Forest pruning parameter estimation through Harmony Search

Pattern recognition in large amount of data has been paramount in the last decade, since that is not straightforward to design interactive and real time classification systems. Very recently, the Optimum-Path Forest classifier was proposed to overcome such limitations, together with its training set pruning algorithm, which requires a parameter that has been empirically set up to date. In this paper, we propose a Harmony Search-based algorithm that can find near optimal values for that. The experimental results have showed that our algorithm is able to find proper values for the OPF pruning algorithm parameter. © 2011 IEEE.

Pruning management of cassava for animal feeding: parameters of the root

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Design and implementation of a fft pruning engine for DSA-enabled cognitive radios.

This research work presents the design and implementation of a FFT pruning block, which is an extension to the FFT core for OFDM demodulation, enabling run-time 8 pruning of the FFT algorithm, without any restrictions on the distribution pattern of the active/inactive sub-carriers. The design and implementation of FFT processor core is not the part of this work. The whole design was prototyped on an ALTERA STRATIX V FPGA to evaluate the performance of the pruning engine. Synthesis and simulation results showed that the logic overhead introduced by the pruning block is limited to a 10% of the total resources utilization. Moreover, in presence of a medium-high scattering of the sub-carriers, power and energy consumption of the FFT core were reduced by a 30% factor.

Effect of training systems and pruning methods on fruit quality in apple

The introduction of dwarfed rootstocks in apple crop has led to a new concept of intensive planting systems with the aim of producing early high yield and with returns of the initial high investment. Although yield is an important aspect to the grower, the consumer has become demanding regards fruit quality and is generally attracted by appearance. To fulfil the consumer’s expectations the grower may need to choose a proper training system along with an ideal pruning technique, which ensure a good light distribution in different parts of the canopy and a marketable fruit quality in terms of size and skin colour. Although these aspects are important, these fruits might not reach the proper ripening stage within the canopy because they are often heterogeneous. To describe the variability present in a tree, a software (PlantToon®), was used to recreate the tree architecture in 3D in the two training systems. The ripening stage of each of the fruits was determined using a non-destructive device (DA-Meter), thus allowing to estimate the fruit ripening variability. This study deals with some of the main parameters that can influence fruit quality and ripening stage within the canopy and orchard management techniques that can ameliorate a ripening fruit homogeneity. Significant differences in fruit quality were found within the canopies due to their position, flowering time and bud wood age. Bi-axis appeared to be suitable for high density planting, even though the fruit quality traits resulted often similar to those obtained with a Slender Spindle, suggesting similar fruit light availability within the canopies. Crop load confirmed to be an important factor that influenced fruit quality as much as the interesting innovative pruning method “Click”, in intensive planting systems.