Role of animal pole protuberance and microtubules during meiosis in sea cucumber Apostichopus japonicus oocytes

Fully grown oocytes of Apostichopus japonicus have a cytoplasmic protuberance where the oocyte attaches to the follicle. The protuberance and the oolamina located on the opposite side of the oocyte indicate the animal-vegetal axis. Two pre-meiotic centrosomes are anchored to the protuberance by microtubules between centrosomes and protuberance. After meiosis reinitiation induced by DTT solution, the germinal vesicle (GV) migrates towards the protuberance. The GV breaks down after it migrates to the oocyte membrane on the protuberance side. The protuberance then contracts back into the oocyte and the first polar body extrudes from the site of the former protuberance. The second polar body forms beneath the first. Thus the oocyte protuberance indicates the presumptive animal pole well before maturation of the oocyte.

Morphological Organization of the Dorsal Protuberance of Linepithema humile (Mayr, 1868) Ant's Larvae (Hymenoptera, Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Experimental Investigation of Heat Fluxes in the Vicinity of Protuberances on a Flat Plate at Hypersonic Speeds

Heat transfer rates measured in front and to the side of a protrusion on an aluminum flat plate subjected to hypersonic flow at zero angle of attack are presented for two flow enthalpies of approximately 2 MJ/kg and 4.5 MJ/kg. Experiments were conducted in the hypersonic shock tunnel (HST2) and free piston driven HST3 at a freestream Mach number of 8. Heat transfer data was obtained for different geometries of the protrusion of a height of 4 mm, which is approximately the local boundary layer thickness. Comparatively high rates of heat transfer were obtained at regions of flow circulation in the separated region, with the hottest spot generally appearing in front of the protuberance. Experimental values showed moderate agreement with existing empirical correlations at higher enthalpy but not at all for the lower enthalpy condition, although the correlations were coined at enthalpy values nearer to the lower value. Schlieren visualization was also done to investigate the flow structures qualitatively.

Hypersonic interference heating on flat plate with short three-dimensional protuberances

Experiments were conducted to measure the heat flux in the vicinity of a three-dimensional protuberance placed on a flat plate facing a hypersonic flow at zero angle of attack. The effects of flow enthalpy and height of the protuberance on the interference heating in its vicinity were studied. Evidence of disturbed flow with highly three-dimensional characteristics and heightened vorticity was observed near the protrusion. A parametric study by changing the deflection angle of the protuberance was also made. Correlations exist in the open literature for enthalpy values lower than 2  MJ/kg. This effort has yielded a new correlation that is valid for enthalpies up to 6  MJ/kg. The Z-type schlieren technique was used to visualize the flow features qualitatively for one of the flow conditions studied.

Hypersonic interference heating on cones with short three-dimensional protuberances

Heat fluxes around short, three-dimensional protuberances on sharp and blunt cones in hypersonic flow were experimentally measured using platinum thin-film sensors deposited on macor inserts. A parametric study of different protrusion geometries and flow conditions were conducted. Excessive heating was observed at locations near the protrusion where increased vorticity is expected, with the hottest spot being presented at the foot of the protuberance immediately upstream of it. If left unchecked, these hot spots could prove detrimental to hypersonic flight vehicles. Z-type schlieren technique was used to visualize the flow features qualitatively. New correlations to predict the heat flux at the hot spot have been proposed. (C) 2014 Elsevier Inc. All rights reserved.

Investigation of the separated region ahead of three-dimensional protuberances on plates and cones in hypersonic flows with laminar boundary layers

Heat transfer rate and pressure measurements were made upstream of surface pro-tuberances on a flat plate and a sharp cone subjected to hypersonic flow in a conventional shock tunnel. Heat flux was measured using platinum thin-film sensors deposited on macor substrate and the pressure measurements were made using fast acting piezoelectric sensors. A distinctive hot spot with highest heat flux was obtained near the foot of the protuberance due to heavy vortex activity in the recirculating region. Schlieren flow visualization was used to capture the shock structures and the separation distance ahead of the protrusions was quantitatively measured for varying protuberance heights. A computational analysis was conducted on the flat plate model using commercial computational fluid dynamics software and the obtained trends of heat flux and pressure were compared with the experimental observation. Experiments were also conducted by physically disturbing the laminar boundary layer to check its effect on the magnitude of the hot spot heat flux. In addition to air, argon was also used as test gas so that the Reynolds number can be varied. (C) 2014 AIP Publishing LLC.

Espécies de Rhipidodontini das bacias do alto rio Paraná, rio São Francisco e rios costeiros do Atlântico Leste, Norte e Nordeste (Bivalvia: Unionoida: Hyriidae)

Rhipidodontini (Rhipidodonta Mörch, 1853 + Diplodon Spix in Wagner, 1827) é grupo de bivalves de água doce tem taxonomia complicada, devido às descrições originais sucintas e muitas vezes pouco ou não ilustradas, somado a isto, estes bivalves carecem de uma revisão detalhada. Estas lacunas de informação têm gerando uma grande flutuação nas espécies consideradas válidas pelos diferentes autores, dificultando a identificação das mesmas, assim como da biologia e distribuição. Assim, se propôs neste estudo a revisão taxonômica das espécies de Rhipidodontini nas bacias do alto rio Paraná, rio São Francisco e rios costeiros do Atlântico Leste, Norte e Nordeste. Para alcançar este objetivo vistoriamos material em coleções no Brasil e exterior. Coletas foram realizadas em diversas localidades para obtenção de exemplares para descrição das partes moles e gloquídios. As informações obtidas, somado ao descrito na literatura, foram utilizadas para traçar um panorama de distribuição e conservação das espécies. As principais características das conchas foram utilizadas para elaboração de uma chave dicotômica para auxílio na identificação. Uma análise morfométrica foi empregada com o intuito de distinguir as espécies através da forma da concha. Reconhecemos Diplodon e Rhipidodonta incluídos na tribo Rhipidodontini. Em Diplodon foram identificadas seis espécies nas bacias estudadas: Diplodon ellipticus Spix in Wagner, 1827; Diplodon fontainianus (dOrbigny, 1835); Diplodon jacksoni Marshall, 1928; Diplodon multistriatus (Lea, 1831); Diplodon paulista (Ihering, 1893) e Diplodon rhombeus Spix in Wagner, 1827. Apesar de Diplodon granosus (Bruguière, 1792) possuir extensos registros na região estuada, a espécie foi limitada a região amazônica na nossa avaliação. Em Rhipidodonta, foi reconhecida uma única espécie, Rhipidodonta garbei (Ihering, 1910). Entre estas espécies, temos algumas tradicionalmente reconhecidas como válidas (e.g. D. ellipticus e D. granosus), contudo, outras foram revalidadas (e.g. D. jacksoni e R. garbei) e redefinidas perante a análise do material tipo, partes moles e gloquídio. Não foi possível a eleição de uma única característica morfológica para a separação das espécies, porém detalhes das brânquias, estômago, contorno da concha e escultura umbonal figuraram entre as mais utilizadas. Para a separação dos gêneros de Rhipidodontini foram empregados atributos dos gloquídios (e.g. gancho gloquidial, protuberância e forma do gloquídio) e das brânquias (e.g. forma da brânquia e conexão entre as lamelas). A chave dicotômica com base em características das conchas auxiliou a separar as espécies de Rhipidodontini. A análise morfométrica constituiu uma ferramenta útil na separação das espécies, corroborando as identificações prévias. Salientamos que o estudo aqui apresentado deve ser expandido para outras bacias hidrográficas sul-americanas com o intuito de se conhecer a real diversidade destes bivalves de água doce

Anatomical landmarks for transnasal endoscopic skull base surgery.

Resection of midline skull base lesions involve approaches needing extensive neurovascular manipulation. Transnasal endoscopic approach (TEA) is minimally invasive and ideal for certain selected lesions of the anterior skull base. A thorough knowledge of endonasal endoscopic anatomy is essential to be well versed with its surgical applications and this is possible only by dedicated cadaveric dissections. The goal in this study was to understand endoscopic anatomy of the orbital apex, petrous apex and the pterygopalatine fossa. Six cadaveric heads (3 injected and 3 non injected) and 12 sides, were dissected using a TEA outlining systematically, the steps of surgical dissection and the landmarks encountered. Dissection done by the "2 nostril, 4 hands" technique, allows better transnasal instrumentation with two surgeons working in unison with each other. The main surgical landmarks for the orbital apex are the carotid artery protuberance in the lateral sphenoid wall, optic nerve canal, lateral optico-carotid recess, optic strut and the V2 nerve. Orbital apex includes structures passing through the superior and inferior orbital fissure and the optic nerve canal. Vidian nerve canal and the V2 are important landmarks for the petrous apex. Identification of the sphenopalatine artery, V2 and foramen rotundum are important during dissection of the pterygopalatine fossa. In conclusion, the major potential advantage of TEA to the skull base is that it provides a direct anatomical route to the lesion without traversing any major neurovascular structures, as against the open transcranial approaches which involve more neurovascular manipulation and brain retraction. Obviously, these approaches require close cooperation and collaboration between otorhinolaryngologists and neurosurgeons.

Actin cytoskeleton regulates pollen tube growth and tropism

La fertilisation chez les plantes dépend de la livraison des cellules spermatiques contenues dans le pollen à l’ovule. Au contact du stigmate, le grain de pollen s’hydrate et forme une protubérance, le tube pollinique, chargé de livrer les noyaux spermatiques à l’ovule. Le tube pollinique est une cellule à croissance rapide, anisotrope et non autotrophe; ainsi tout au long de sa croissance à travers l’apoplaste du tissu pistillaire, le tube pollinique puise ses sources de carbohydrates et de minéraux du pistil. Ces éléments servent à la synthèse des constituants de la paroi qui seront acheminés par des vésicules de sécrétion jusqu’à l’apex du tube. Ce dernier doit aussi résister à des pressions mécaniques pour maintenir sa forme cylindrique et doit répondre à différents signaux directionnels pour pouvoir atteindre l’ovule. Mon projet de doctorat était de comprendre le rôle du cytosquelette dans la croissance anisotrope du tube pollinique et d’identifier les éléments responsables de sa croissance et de son guidage. Le cytosquelette du tube pollinique est composé des microfilaments d’actine et des microtubules. Pour assurer une bonne croissance des tubes polliniques in vitro, les carbohydrates et les éléments de croissance doivent être ajoutés au milieu à des concentrations bien spécifiques. J’ai donc optimisé les conditions de croissance du pollen d’Arabidopsis thaliana et de Camellia japonica qui ont été utilisés avec le pollen de Lilium longiflorum comme modèles pour mes expériences. J’ai développé une méthode rapide et efficace de fixation et de marquage du tube pollinique basée sur la technologie des microondes. J’ai aussi utilisé des outils pharmacologiques, mécaniques et moléculaires couplés à différentes techniques de microscopie pour comprendre le rôle du cytosquelette d’actine lors de la croissance et le tropisme du tube pollinique. J’ai trouvé que le cytosquelette d’actine et plus précisément l’anneau d’actine localisé dans la partie sub-apicale du tube est fortement impliqué dans la croissance et le maintien de l’architecture du tube à travers le contrôle de la livraison des vésicules de sécrétion. J’ai construit une chambre galvanotropique qui peut être montée sur un microscope inversé et qui sert à envoyer des signaux tropistiques bien précis à des tubes polliniques en croissance. J’ai trouvé que les filaments d’actine sont impliqués dans la capacité du tube pollinique à changer de direction. Ce comportement tropistique dépend de la concentration du calcium dans le milieu de croissance et du flux de calcium à travers des canaux calciques. Le gradient de calcium établi dans le tube pollinique affecte l’activité de certaines protéines qui se lient à l’actine et dont le rôle est la réorganisation des filaments d’actine. Parmi ces protéines, il y a celles de dépolymérisation de l’actine (ADF) dont deux spécifiquement exprimées dans le gamétophyte mâle d’Arabidopsis (ADF7 et ADF10). Par marquage avec des proteins fluorescents, j’ai trouvé que l’ADF7 et l’ADF10 ont des expressions différentielles pendant la microsporogenèse et la germination et croissance du tube pollinique et qu’elles partagent entre elles des rôles importants durant ces différents stades.

Cell wall composition regulates cell shape and growth behaviour in pollen tubes

L’une des particularités fondamentales caractérisant les cellules végétales des cellules animales est la présence de la paroi cellulaire entourant le protoplaste. La paroi cellulaire joue un rôle primordial dans (1) la protection du protoplaste, (2) est impliquée dans les mécanismes de filtration et (3) est le lieu de maintes réactions biochimiques nécessaires à la régulation du métabolisme et des propriétés mécaniques de la cellule. Les propriétés locales d’élasticité, d’extensibilité, de plasticité et de dureté des composants pariétaux déterminent la géométrie et la forme des cellules lors des processus de différentiation et de morphogenèse. Le but de ma thèse est de comprendre les rôles que jouent les différents composants pariétaux dans le modelage de la géométrie et le contrôle de la croissance des cellules végétales. Pour atteindre cet objectif, le modèle cellulaire sur lequel je me suis basé est le tube pollinique ou gamétophyte mâle. Le tube pollinique est une protubérance cellulaire qui se forme à partir du grain de pollen à la suite de son contact avec le stigmate. Sa fonction est la livraison des cellules spermatiques à l’ovaire pour effectuer la double fécondation. Le tube pollinique est une cellule à croissance apicale, caractérisée par la simple composition de sa paroi et par sa vitesse de croissance qui est la plus rapide du règne végétal. Ces propriétés uniques font du tube pollinique le modèle idéal pour l’étude des effets à courts termes du stress sur la croissance et le métabolisme cellulaire ainsi que sur les propriétés mécaniques de la paroi. La paroi du tube pollinique est composée de trois composantes polysaccharidiques : pectines, cellulose et callose et d’une multitude de protéines. Pour comprendre les effets que jouent ces différents composants dans la régulation de la croissance du tube pollinique, j’ai étudié les effets de mutations, de traitements enzymatiques, de l’hyper-gravité et de la gravité omni-directionnelle sur la paroi du tube pollinique. En utilisant des méthodes de modélisation mathématiques combinées à de la biologie moléculaire et de la microscopie à fluorescence et électronique à haute résolution, j’ai montré que (1) la régulation de la chimie des pectines est primordiale pour le contrôle du taux de croissance et de la forme du tube et que (2) la cellulose détermine le diamètre du tube pollinique en partie sub-apicale. De plus, j’ai examiné le rôle d’un groupe d’enzymes digestives de pectines exprimées durant le développement du tube pollinique : les pectate lyases. J’ai montré que ces enzymes sont requises lors de l’initiation de la germination du pollen. J’ai notamment directement prouvé que les pectate lyases sont sécrétées par le tube pollinique dans le but de faciliter sa pénétration au travers du style.

Anàlisi microscòpica de l'esperma ejaculada i de la maduració epididimària dels espermatozoides de Sus domesticus

El present treball analitza la morfologia espermàtica de l'ejaculat de Sus domesticus, la histologia del conducte epididimari i la qualitat de l'esperma epididimari. El material d'estudi prové de mascles reproductors porcins de les races Landrace i Pietrain, sans i sexualment madurs. La metodologia emprada es basa en l'examen al microscopi òptic (camp dar, contrast de fases i contrast interferencial) i al microscopi electrònic (de rastreig i de transmissió). Per a l'anàlisi estadística de les dades s'ha utilitzat el test de la X2 de Pearson (p<0,01). L'estudi de la morfologia espermàtica de l'ejaculat permet distingir diversos tipus de gàmetes que s'han classificat en tres grups: espermatozoides madurs, espermatozoides immadurs i espermatozoides aberrants, així com algunes cèI.lules somàtiques. L'espermatozoide madur de Sus domesticus és un gàmeta típic de mamífer (format per tres parts: cap, peça de connexió i cua) en que destaquen: la forma oval i plana del cap, el desenvolupament d'una protuberància acrosòmica apical en una de les cares del cap i la presencia dels cossos laminars en la peça de connexió. L'espermatozoide immadur es caracteritza per la presencia de la gota citoplasmàtica, el major desenvolupament de la protuberància acrosòmica apical i per la flexibilitat del cap. Els espermatozoides aberrants es descriuen i classifiquen segons la morfologia externa i la morfologia interna, distingint-se una amplia gama de malformacions que afecten les diverses parts de l'espermatozoide. Les cèl·lules somàtiques presents en l'ejaculat ofereixen les característiques pròpies d'un macròfag i se les ha observat englobant espermatozoides immadurs. L'estudi de l'estructura i la ultraestructura de les tres regions anatòmiques de l'epidídim (caput, corpus i cauda) revela que: a) l'epiteli epididimari és pseudoestratificat amb esterocilis, b) cada regió epididimària presenta uns valors característics en relació al diàmetre intern del conducte, a l'alçada de l'epiteli, a la longitud dels esterocilis i al nombre de cèl·lules somàtiques luminals, i c) l'epiteli epididimari esta format per cinc tipus cel·lulars: les cèl·lules principals, les cèl·lules basals, les cèl·lules dares, les cèl·lules estretes i les cèl·lules basòfiles. Dels resultats obtinguts es pot deduir que: a) aquests cinc tipus cel·lulars es distribueixen al llarg del conducte epididimari de forma no homogènia, b) les cèl·lules basals, les cèl·lules principals, les cèI.Iules dares i les cèl·lules estretes són diversos estadis del desenvolupament d'un mateix tipus cel·lular especialitzat en la secreció i reabsorció cel·lular, i c) les cèl·lules basòfiles són les precursores de les cèl·lules somàtiques luminals. La qualitat de l'esperma procedent de les tres regions de l'epidídim ha estat analitzada a partir dels següents paràmetres espermàtics: vitalitat, resistència osmòtica dels acrosomes, estabilitat cefàlica, morfologia, malformacions i aglutinació. La vitalitat espermàtica disminueix progressivament al llarg del conducte epididimari. La resistència osmòtica dels acrosomes s'assoleix en la regió corporal de l'epidídim. L'estabilitat cefàlica dels espermatozoides és més elevada en les dues primeres regions de l'epidídim que en la regió caudal. Cada regió de l'epidídim es caracteritza per una morfologia espermàtica específica: a) el caput es caracteritza per l'elevat percentatge d'espermatozoides immadurs amb gota citoplasmàtica proximal, b) el corpus es caracteritza per l'elevat percentatge d'espermatozoides immadurs amb gota citoplasmàtica distal, i c) el cauda es caracteritza per l'elevat percentatge d'espermatozoides madurs. S'han estudiat les següents malformacions d'origen epididimari: espermatozoides de cua doblegada per l'anell de Jensen (origen en el cauda), espermatozoides de cua enrotllada i espermatozoides de cues fusionades (origen en el corpus). Els espermatozoides perden la capacitat de doblegar la cua per la peça intermèdia a mesura que avancen pel conducte epididimari. L'aglutinació espermàtica tendeix a augmentar progressivament al llarg del conducte epididimari, si bé, no s'han observat variacions significatives en els diversos tipus d'aglutinació. La maduració epididimaria dels espermatozoides de Sus domesticus és un procés lent i complex, i la qualitat de l'ejaculat depèn de que aquesta maduració hagi estat completa. La presencia en l'esperma ejaculat de formes gamètiques pròpies de l'esperma epididimari és un signe d'una incompleta maduració dels espermatozoides; i, pot considerar-se com un paràmetre indicador d'estrés del mascle reproductor, tant més quant més s'assembli a la morfologia espermàtica de la regió cefàlica de l'epidídim.

Behavioural and morphological observations of the Collared Crescentchest (Melanopareia torquata) in a Cerrado area of south-eastern Brazil

The Collared Crescentchest (Melanopareia torquata) is endemic to the Cerrado Biome, and distributed mainly in Brazil, but extending to Bolivia and Paraguay. Although considered of least concern globally, it is threatened in the state of Sao Paulo in south-eastern Brazil. In this study we examined the morphology and some aspects of behaviour of the Collared Crescentchest. Birds were captured with mist-nets using playback in September-December 2006 and October-November 2007. For each captured bird, we took a range of morphological measurements, looked for brood-patches and moult, and took a blood sample for genetic determination of sex. Of the 35 individuals captured, only five were female, probably as a result of behavioural differences between sexes, with males apparently responding more readily to the playback. Furthermore, birds with white dorsal patches exhibited more aggression or risk taking behaviour than birds without patches. However, there was no sexual dimorphism in any of the morphological or colour traits measured ( although the female sample was small). Brood-patches were present mainly in October and November, but we did not detect any cloacal protuberance. Among the four species that comprise the family Melanopareiidae, this is the first record of brood-patches in males.

Femtosecond light distribution at skin and liver of rats: analysis for use in optical diagnostics

In this study we investigated the light distribution under femtosecond laser illumination and its correlation with the collected diffuse scattering at the surface of ex-vivo rat skin and liver. The reduced scattering coefficients mu`s for liver and skin due to different scatterers have been determined with Mie-scattering theory for each wavelength (800, 630, and 490 nm). Absorption coefficients mu(a) were determined by diffusion approximation equation in correlation with measured diffused reflectance experimentally for each wavelength (800, 630, and 490 nm). The total attenuation coefficient for each wavelength and type of tissue were determined by linearly fitting the log based normalized intensity. Both tissues are strongly scattering thick tissues. Our results may be relevant when considering the use of femtosecond laser illumination as an optical diagnostic tool. [GRAPHICS] A typical sample of skin exposed to 630 nm laser light (C) 2010 by Astro Ltd. Published exclusively by WILEY-VCH Verlag GmbH & Co. KGaA

Efeitos da administração subaracnóidea de grandes volumes de lidocaína a 2% e ropivacaína a 1% sobre a medula espinhal e as meninges: estudo experimental em cães

JUSTIFICATIVA E OBJETIVOS: A injeção de grandes volumes de anestésico local no espaço subaracnóideo, após punção dural acidental, é complicação da anestesia peridural. O objetivo desta pesquisa foi investigar as possíveis alterações clínicas e histológicas desencadeadas por grandes volumes de lidocaína a 2% e ropivacaína a 1%, simulando injeção subaracnóidea acidental, em cães. MÉTODO: Vinte e um cães foram distribuídos aleatoriamente em 3 grupos, que receberam por via subaracnóidea: G1 - cloreto de sódio a 0,9%; G2 - lidocaína a 2% e G3 - ropivacaína a 1%. A punção subaracnóidea foi realizada no espaço intervertebral L6-L7. O volume de anestésico local administrado foi de 1 ml para cada 10 cm de distância entre a protuberância occipital e o espaço lombossacral (5 - 6,6 ml). Após 72 horas de observação clínica os animais foram sacrificados e foi removida a porção lombossacral da medula para exame histológico, por microscopia óptica. RESULTADOS: Nenhum animal do G1 apresentou alterações clínicas ou histológicas da medula espinhal. Foram observados dois casos de necrose do tecido nervoso em G2, porém mudanças clínicas, em somente um desses cães e em outros dois animais que não apresentaram alterações histológicas. Foi encontrada necrose focal do tecido nervoso medular em um animal de G3. Todos os animais de G3 permaneceram clinicamente normais. CONCLUSÕES: Conclui-se que grandes volumes de lidocaína a 2% determinaram alterações clínicas e histológicas mais intensas que os de ropivacaína a 1%.