Fermentation of cacao (Theobroma cacao L.) seeds with a hybrid Kluyveromyces marxianus strain improved product quality attributes

Fermentation of Theobroma cacao (cacao) seeds is an absolute requirement for the full development of chocolate flavor precursors. An adequate aeration of the fermenting cacao seed mass is a fundamental prerequisite for a satisfactory fermentation. Here, we evaluated whether a controlled inoculation of cacao seed fermentation using a Kluyveromyces marxianus hybrid yeast strain, with an increased pectinolytic activity, would improve an earlier liquid drainage (`sweatings`) from the fermentation mass, developing a superior final product quality. Inoculation with K. marxianus increased by one third the volume of drained liquid and affected the microorganism population structure during fermentation, which was detectable up to the end of the process. Introduction of the hybrid yeast affected the profile of total seed protein degradation evaluated by polyacrylamide gel electrophoresis, with improved seed protein degradation, and reduction of titrable acidity. Sensorial evaluation of the chocolate obtained from beans fermented with the K. marxianus inoculation was more accepted by analysts in comparison with the one from cocoa obtained through natural fermentation. The increase in mass aeration during the first 24 h seemed to be fundamental for the improvement of fermentation quality, demonstrating the potential application of this improved hybrid yeast strain with superior exogenous pectinolytic activity.

Product quality judgments in a two-sequence cue environment

Previous research demonstrated that the sequence of informational cues and the level of distraction have an impact on the judgment of a product’s quality. This study investigates the influence of the force behind the processing of these cues, working memory (WM). The results indicate that without distraction, consumers with low and high WM capacity (WMC) equally base their product evaluation on the first sequential cue. In the presence of a distractor, however, low WM individuals are no longer able to recall the initial cue, and thus derive their product judgment from the final cue. Moreover, evidence of intercultural differences in the perception of product related cues, and their aptitude for signaling a favorable product quality is provided.

Integrated consideration of product quality within factory automation systems

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013

Managing Quality under Heterogeneous Consumer Demand and Product Quality, October 2005

Based on accepted advances in the marketing, economics, consumer behavior, and satisfaction literatures, we develop a micro-foundations model of a firm that needs to manage the quality of a product that is inherently heterogeneous in the presence of varying customer tastes or expectations for quality. Our model blends elements of the returns to quality, customer lifetime value, and service profit chain approaches to marketing. The model is then used to explain several empirical results pertaining to the marketing literature by explicitly articulating the trade-offs between customer satisfaction and costs (including opportunity costs) of quality. In this environment firms will find it optimal to allow some customers to go unsatisfied. We show that the relationship between the expected number of repeated purchases by an individual customer is endogenous to the choice of quality by the firm, indicating that the number of purchases cannot be chosen freely to estimate a customer’s lifetime value.

Agency problems with non-smooth decision profiles: the case of monopoly under product quality

A method for dealing with monotonicity constraints in optimal control problems is used to generalize some results in the context of monopoly theory, also extending the generalization to a large family of principal-agent programs. Our main conclusion is that many results on diverse economic topics, achieved under assumptions of continuity and piecewise differentiability in connection with the endogenous variables of the problem, still remain valid after replacing such assumptions by two minimal requirements.

Influence of software development process quality on product quality

Ohjelmistojen tärkeys nykypäivän yhteiskunnalle kasvaa jatkuvasti. Monia ohjelmistoprojekteja vaivaavat ongelmat aikataulussa pysymisestä, korkean tuottavuuden ylläpitämisestä ja riittävän korkeasta laadusta. Ohjelmistokehitysprosessien parantamisessa on naiden ongelmien minimoimiseksi tehty suuria investointeja. Investointien syynä on ollut olettamus ohjelmistokehityksen kapasiteetin suora riippuvuus tuotteen laadusta. Tämän tutkimuksen tarkoituksena oli tutkia Ohjelmistokehitysprosessien parantamisen mahdollisuuksia. Olemassaolevat ohjelmistokehityksen ja Ohjelmistokehitysprosessin parantamisen mallit, tekniikat ja metodologiat esiteltiin. Esiteltyjen mallien, tekniikoiden ja metodologioiden soveltuvuus analysoitiin ja suositus mallien käytöstä annettiin.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Impact of Product Quality, Service Quality and Contextual Experience on Customer Perceived Value and Future Buying Intentions

Recognizing that high satisfaction leads to high customer loyalty, companies today are aiming for total customer satisfaction. This article explains relative impact of product quality, service quality and contextual experience on customer perceived value and intention to shop in the future. The data has been collected using a questionnaire from 205 customers of a national retailer chain. The relative importance of product quality, service quality and contextual experience on customer perceived value and thus on customer preference and future intentions was measured using multiple regression. Also, the contribution of perceived value to preference and thus on future buying intention was also measured. Structural Equation Model (SEM) using Amos 4 was used to find the overall fitness of the model. It was found that product quality, service quality and contextual experience have a major influence on customer perceived value

Production of alcoholic beverage from ginger: study of fermentation process and final product quality

Introduction: In Brazil part of the production of ginger is of inadequate quality for export. The production of spirit from felt-over rhizomes is an alternative of great interest to producers of these rhizomes. Aim: Aiming to increase the value of felt-over rhizomes, this work aimed to study the use of ginger as a raw material for alcoholic beverage production. It was evaluated the effect of fermentation conditions on the components of fermented alcoholic, as well as, the quality of alcoholic distilled beverage of ginger. Methods: Dehydrated ginger passed by enzymatic hydrolysis-saccharification processes. The hydrolysate obtained was analyzed for sugar profile in HPLC. The alcoholic fermentation process followed the central composite rotational design for three factors: fermentation temperature (23 to 37ºC), time of fermentation (17 to 33 h) and concentration of inoculum (0.22 to 3.00%). The fermented alcoholic obtained was analyzed in HPLC for the contents of ethanol, methanol, glycerol and residual sugars. The distillated alcoholic beverage of ginger was analyzed for ethanol, methanol, acetaldehyde, ethyl acetate and higher alcohols in the gas chromatography (GC). In addition, copper content and acidity were analyzed Results: Sugar profile of the ginger hydrolysate revealed the presence of 77.8% of glucose. Data analysis of fermentation process showed influence of temperature on ethanol and methanol content of the fermented alcoholic of ginger. Time of fermentation had effect on glycerol content. All parameters of process had influence on residual sugars contents. The HPLC analysis has shown presence of methanol, ethyl acetate, aldehyde, acids, higher alcohols and esters in distilled alcoholic beverage of ginger. Conclusion: Fermented alcoholic of ginger with higher levels of ethanol can be obtained under the conditions of 1.5% w/w of inoculum, 30°C of temperature and 24 hours of fermentation time. In this condition of fermentation process the beverage of ginger had good quality.

Product quality and intra-industry trade

In this study, we argue that the conventional intra-industry trade (IIT) index does not address the quality issue directly and propose a methodology to make full use of unit-price gap information to deduce quality differences between simultaneously exported and imported products. By applying this measure to German trade data at the eight-digit level, we study the quality improvement of Chinese export goods in its IIT with Germany. We compare the case of China with those of Eastern European countries, which are also major trading partners of Germany. Our results show that the unit-value difference in IIT between Germany and Eastern European countries is clearly narrowing. However, China's export prices to Germany are much lower than Germany's export prices to China, and this gap has not narrowed over the last 23 years. This is at odds with the common perception that China's product quality has improved, as documented by Rodrik (2006) and Schott (2008). Our results support Xu (2010), which argued that incorporating the quality aspect of the exported goods weakens or even eliminates the evidence of the sophistication of Chinese export goods in Rodrik (2006).

Decision-making in product quality based on failure knowledge

Decision-making in product quality is an indispensable stage in product development, in order to reduce product development risk. Based on the identification of the deficiencies of quality function deployment (QFD) and failure modes and effects analysis (FMEA), a novel decision-making method is presented that draws upon a knowledge network of failure scenarios. An ontological expression of failure scenarios is presented together with a framework of failure knowledge network (FKN). According to the roles of quality characteristics (QCs) in failure processing, QCs are set into three categories namely perceptible QCs, restrictive QCs, and controllable QCs, which present the monitor targets, control targets and improvement targets respectively for quality management. A mathematical model and algorithms based on the analytic network process (ANP) is introduced for calculating the priority of QCs with respect to different development scenarios. A case study is provided according to the proposed decision-making procedure based on FKN. This methodology is applied in the propeller design process to solve the problem of prioritising QCs. This paper provides a practical approach for decision-making in product quality. Copyright © 2011 Inderscience Enterprises Ltd.