Tuotehyväksynnän hallinta rakennusliikkeessä

Rakennusalan tuotehyväksyntä muuttuu EU:n rakennustuoteasetuksen astuessa voimaan 1.7.2013, jolloin CE-merkintä tulee pakolliseksi suurella osalle rakennustuotteita. Muutos aiheuttaa toimia yli 4000 suomalaisyrityksessä, jotka joutuvat hankkimaan tuotteelleen CE-merkinnän. Rakennustuoteasetus vaikuttaa kaikkiin alan toimijoihin. Tämä diplomityö on toteutettu toimintatutkimuksena, johon sisältyvien teemahaastattelujen kautta saatujen tutkimustulosten perusteella kehitettiin tuotehyväksynnän hallintaan työkalu, YIT-tuotehyväksyntäkortit. Ne laadittiin tuotehyväksynnän teoriaan pohjalta palvelemaan koko YIT Rakennus Oy:tä ja muokattiin yrityksen tarpeisiin sopiviksi soveltaen toimintatutkimuksen tuloksia. YIT-tuotehyväksyntäkortiston avulla pyritään kehittämään yrityksen toimintatapoja vaikuttamalla organisaation henkilöstöön osallistamalla ja vastuuttamalla heitä. Tuotehyväksynnän vaikutuksia rakennushankkeen eri vaiheisiin tutkittiin havainnoivan keskustelun avulla ja teemahaastatteluiden tuloksia analysoiden. YIT-tuotehyväksyntäkortistoa hallinnan välineenä testattiin pääasiassa haastattelujen avulla, sillä mallikortit eivät vielä mahdollistaneet laajempaa testausta käytännössä. Työn tuloksina esitellään YIT-tuotehyväksyntäkorttien laadintaprosessi ja paneudutaan tarkemmin korttien sisältöön.

Efectividad de la vacuna acelular antipertussis en adolescentes: una revisión sistemática

La incidencia de la tosferina ha mostrado un incremento en los últimos años; afectando predominantemente a los niños menores de 1 año, adolescentes y adultos. En el 2005 el Comité Asesor de Prácticas en Inmunización (ACIP) recomendó administrar una dosis de refuerzo de la vacuna acelular antipertussis a los adolescentes. Esta estrategia ha sido adoptada por distintos países. Sin embargo hasta el momento no existe una revisión sistemática que evalúe la efectividad de esta medida de prevención primaria. Métodos: Revisión sistemática de la literatura de artículos acerca de la efectividad de la vacuna acelular antipertussis como dosis de refuerzo en adolescentes. Resultados: La búsqueda inicial arrojó un total de 121 resultados, de los cuales solo 4 cumplieron los criterios de selección. Se evaluó en éstos, la inmunogenicidad generada contra tétanos y difteria por la vacuna Tdap vs Td con resultados significativos y similares. Además se documentó la respuesta inmunológica protectora generada por la Tdap contra tosferina. En cuanto a la reactogenicidad, en general fue baja. Discusión: La vacuna Tdap genera inmunogenicidad similar a la Td contra tétanos y difteria. Además proporciona adecuada protección contra la tosferina como dosis de refuerzo en los adolescentes. Conclusión: La evidencia disponible sugiere que se puede recomendar la vacuna Tdap como dosis de refuerzo en adolescentes entre los 10 y los 18 años de edad por su baja reactogenicidad y adecuada inmunogenicidad contra tétanos, difteria y B. Pertussis.

Definition of a support infrastructure for replicating and aggregating families of software engineering experiments

Experimental software engineering includes several processes, the most representative being run experiments, run replications and synthesize the results of multiple replications. Of these processes, only the first is relatively well established in software engineering. Problems of information management and communication among researchers are one of the obstacles to progress in the replication and synthesis processes. Software engineering experimentation has expanded considerably over the last few years. This has brought with it the invention of experimental process support proposals. However, few of these proposals provide integral support, including replication and synthesis processes. Most of the proposals focus on experiment execution. This paper proposes an infrastructure providing integral support for the experimental research process, specializing in the replication and synthesis of a family of experiments. The research has been divided into stages or phases, whose transition milestones are marked by the attainment of their goals. Each goal exactly matches an artifact or product. Within each stage, we will adopt cycles of successive approximations (generateand- test cycles), where each approximation includes a diferent viewpoint or input. Each cycle will end with the product approval.

Weighted approval voting

To allow society to treat unequal alternatives distinctly we propose a natural extension of Approval Voting by relaxing the assumption of neutrality. According to this extension, every alternative receives ex-ante a non-negative and finite weight. These weights may differ across alternatives. Given the voting decisions of every individual (individuals are allowed to vote for, or approve of, as many alternatives as they wish to), society elects all alternatives for which the product of total number of votes times exogenous weight is maximal. Our main result is an axiomatic characterization of this voting procedure.

Relevance of in vitro tests of adhesive and composite dental materials, a review in 3 parts. Part 1: Approval requirements and standardized testing of composite materials according to ISO specifications

The first part of this three-part review on the relevance of laboratory testing of composites and adhesives deals with approval requirements for composite materials. We compare the in vivo and in vitro literature data and discuss the relevance of in vitro analyses. The standardized ISO protocols are presented, with a focus on the evaluation of physical parameters. These tests all have a standardized protocol that describes the entire test set-up. The tests analyse flexural strength, depth of cure, susceptibility to ambient light, color stability, water sorption and solubility, and radiopacity. Some tests have a clinical correlation. A high flexural strength, for instance, decreases the risk of fractures of the marginal ridge in posterior restorations and incisal edge build-ups of restored anterior teeth. Other tests do not have a clinical correlation or the threshold values are too low, which results in an approval of materials that show inferior clinical properties (e.g., radiopacity). It is advantageous to know the test set-ups and the ideal threshold values to correctly interpret the material data. Overall, however, laboratory assessment alone cannot ensure the clinical success of a product.

Applications of thermal processing in pharmaceutical drug product development

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Antioxidant And Antiproliferative Activities Of Methanolic Extract From A Neglected Agricultural Product: Corn Cobs.

Neglected agricultural products (NAPs) are defined as discarded material in agricultural production. Corn cobs are a major waste of agriculture maize. Here, a methanolic extract from corn cobs (MEC) was obtained. MEC contains phenolic compounds, protein, carbohydrates (1.4:0.001:0.001). We evaluated the in vitro and in vivo antioxidant potential of MEC. Furthermore, its antiproliferative property against tumor cells was assessed through MTT assays and proteins related to apoptosis in tumor cells were examined by western blot. MEC showed no hydroxyl radical scavenger capacity, but it showed antioxidant activity in Total Antioxidant Capacity and DPPH scavenger ability assays. MEC showed higher Reducing Power than ascorbic acid and exhibited high Superoxide Scavenging activity. In tumor cell culture, MEC increased catalase, metallothionein and superoxide dismutase expression in accordance with the antioxidant tests. In vivo antioxidant test, MEC restored SOD and CAT, decreased malondialdehyde activities and showed high Trolox Equivalent Antioxidant Capacity in animals treated with CCl4. Furthermore, MEC decreased HeLa cells viability by apoptosis due an increase of Bax/Bcl-2 ratio, caspase 3 active. Protein kinase C expression increased was also detected in treated tumor cells. Thus, our findings pointed out the biotechnological potential of corn cobs as a source of molecules with pharmacological activity.

Systematic Management of Variability in UML-based Software Product Lines

This paper presents SMarty, a variability management approach for UML-based software product lines (PL). SMarty is supported by a UML profile, the SMartyProfile, and a process for managing variabilities, the SMartyProcess. SMartyProfile aims at representing variabilities, variation points, and variants in UML models by applying a set of stereotypes. SMartyProcess consists of a set of activities that is systematically executed to trace, identify, and control variabilities in a PL based on SMarty. It also identifies variability implementation mechanisms and analyzes specific product configurations. In addition, a more comprehensive application of SMarty is presented using SEI's Arcade Game Maker PL. An evaluation of SMarty and related work are discussed.

Direct evidence of singlet molecular oxygen generation from peroxynitrate, a decomposition product of peroxynitrite

The decomposition of peroxynitrite to nitrite and dioxygen at neutral pH follows complex kinetics, compared to its isomerization to nitrate at low pH. Decomposition may involve radicals or proceed by way of the classical peracid decomposition mechanism. Peroxynitrite (ONOOH/ONOO(-)) decomposition has been proposed to involve formation of peroxynitrate (O(2)NOOH/O(2)NOO(-)) at neutral pH (D. Gupta, B. Harish, R. Kissner and W. H. Koppenol, Dalton Trans., 2009, DOI: 10.1039/b905535e, see accompanying paper in this issue). Peroxynitrate is unstable and decomposes to nitrite and dioxygen. This study aimed to investigate whether O(2)NOO(-) formed upon ONOOH/ONOO(-) decomposition generates singlet molecular oxygen [O(2) ((1)Delta(g))]. As unequivocally revealed by the measurement of monomol light emission in the near infrared region at 1270 nm and by chemical trapping experiments, the decomposition of ONOO(-) or O(2)NOOH at neutral to alkaline pH generates O(2) ((1)Delta(g)) at a yield of ca. 1% and 2-10%, respectively. Characteristic light emission, corresponding to O(2) ((1)Delta(g)) monomolecular decay was observed for ONOO(-) and for O(2)NOOH prepared by reaction of H(2)O(2) with NO(2)BF(4) and of H(2)O(2) with NO(2)(-) in HClO(4). The generation of O(2) ((1)Delta(g)) from ONOO(-) increased in a concentration-dependent manner in the range of 0.1-2.5 mM and was dependent on pH, giving a sigmoid pro. le with an apparent pK(a) around pD 8.1 (pH 7.7). Taken together, our results clearly identify the generation of O(2) ((1)Delta(g)) from peroxynitrate [O(2)NOO(-) -> NO(2)(-) + O(2) ((1)Delta(g))] generated from peroxynitrite and also from the reactions of H(2)O(2) with either NO(2)BF(4) or NO(2)(-) in acidic media.

Fermentation of cacao (Theobroma cacao L.) seeds with a hybrid Kluyveromyces marxianus strain improved product quality attributes

Fermentation of Theobroma cacao (cacao) seeds is an absolute requirement for the full development of chocolate flavor precursors. An adequate aeration of the fermenting cacao seed mass is a fundamental prerequisite for a satisfactory fermentation. Here, we evaluated whether a controlled inoculation of cacao seed fermentation using a Kluyveromyces marxianus hybrid yeast strain, with an increased pectinolytic activity, would improve an earlier liquid drainage (`sweatings`) from the fermentation mass, developing a superior final product quality. Inoculation with K. marxianus increased by one third the volume of drained liquid and affected the microorganism population structure during fermentation, which was detectable up to the end of the process. Introduction of the hybrid yeast affected the profile of total seed protein degradation evaluated by polyacrylamide gel electrophoresis, with improved seed protein degradation, and reduction of titrable acidity. Sensorial evaluation of the chocolate obtained from beans fermented with the K. marxianus inoculation was more accepted by analysts in comparison with the one from cocoa obtained through natural fermentation. The increase in mass aeration during the first 24 h seemed to be fundamental for the improvement of fermentation quality, demonstrating the potential application of this improved hybrid yeast strain with superior exogenous pectinolytic activity.

Efficiency and feasibility of product disassembly: A case-based study

The productivity associated with commonly available disassembly methods today seldomly makes disassembly the preferred end-of-life solution for massive take back product streams. Systematic reuse of parts or components, or recycling of pure material fractions are often not achievable in an economically sustainable way. In this paper a case-based review of current disassembly practices is used to analyse the factors influencing disassembly feasibility. Data mining techniques were used to identify major factors influencing the profitability of disassembly operations. Case characteristics such as involvement of the product manufacturer in the end-of-life treatment and continuous ownership are some of the important dimensions. Economic models demonstrate that the efficiency of disassembly operations should be increased an order of magnitude to assure the competitiveness of ecologically preferred, disassembly oriented end-of-life scenarios for large waste of electric and electronic equipment (WEEE) streams. Technological means available to increase the productivity of the disassembly operations are summarized. Automated disassembly techniques can contribute to the robustness of the process, but do not allow to overcome the efficiency gap if not combined with appropriate product design measures. Innovative, reversible joints, collectively activated by external trigger signals, form a promising approach to low cost, mass disassembly in this context. A short overview of the state-of-the-art in the development of such self-disassembling joints is included. (c) 2008 CIRP.

Integrating technology roadmapping and portfolio management at the front-end of new product development

Many authors point out that the front-end of new product development (NPD) is a critical success factor in the NPD process and that numerous companies face difficulties in carrying it out appropriately. Therefore, it is important to develop new theories and proposals that support the effective implementation of this earliest phase of NPD. This paper presents a new method to support the development of front-end activities based on integrating technology roadmapping (TRM) and project portfolio management (PPM). This new method, called the ITP Method, was implemented at a small Brazilian high-tech company in the nanotechnology industry to explore the integration proposal. The case study demonstrated that the ITP Method provides a systematic procedure for the fuzzy front-end and integrates innovation perspectives into a single roadmap, which allows for a better alignment of business efforts and communication of product innovation goals. Furthermore, the results indicated that the method may also improve quality, functional integration and strategy alignment. (C) 2010 Elsevier Inc. All rights reserved.

Knowledge transfer in product development processes: A case study in small and medium enterprises (SMEs) of the metal-mechanic sector from Sao Paulo, Brazil

This paper reports a research that evaluated the product development methodologies used in Brazilian small and medium-sized metal-mechanic enterprises (SMEs), in a specific region of Sao Paulo. The tool used for collecting the data was a questionnaire, which was developed and applied through interviews conducted by the researchers in 32 companies. The main focus of this paper can be condensed in the synthesis-question ""Is only the company responsible for the development?"" which was analyzed thoroughly. The results obtained from this analysis were evaluated directly (through the respective percentages of answers) and statistically (through the search of an index which demonstrates if two questions are related). The results point to a degree of maturity in SMEs, which allows product development to be conducted in cooperation networks. (C) 2007 Elsevier Ltd. All rights reserved.

Reaction rate and product morphology in carbon composite iron ore pellets with and without Portland cement

The aim of this work is to study the reaction rate and the morphology of intermediate reaction products during iron ore reduction when iron ore and carbonaceous materials are agglomerated together with or without Portland cement. The reaction was performed at high temperatures, and used small size samples in order to minimise heat transfer constraints. Coke breeze and pure graphite were the carbonaceous materials employed. Portland cement was applied as a binder, and pellet diameters were in the range 5.6-6.5 mm. The experimental technique involved the measurement of the pellet weight loss, as well as the interruption of the reaction at different stages, in order to submit the partially reduced pellet to scanning electron microscopy. The experimental temperature was in the range 1423-1623 K, and the total reaction time varied from 240 to 1200 s. It was observed that above 1523 K the formation of liquid slag occurred inside the pellets, which partially dissolved iron oxides. The apparent activation energies obtained were 255 kJ mol(-1) for coke breeze containing pellets, and 230 kJ mol(-1) for those pellets containing graphite. It was possible to avoid heat transfer control of the reaction rate up to 1523 K by employing small composite pellets.

Medium carbon steel deep drawing: A study on the evolution of mechanical properties, texture and simulations, from cold rolling to the end product

Medium carbon steels are mostly used for simple applications; nevertheless new applications have been developed for which good sheet formability is required. This class of steels has an inherent low formability. A medium carbon hot rolled SAE 1050 steel has been selected for this study. It has been cold rolled with reductions in the 7-80% range. Samples have been used to assess the cold work hardening curve. For samples with a 50 and 80% thickness reduction, an annealing heat treatment has been performed to obtain recrystallization. The material has been characterized in the ""as received"", cold rolled and annealed conditions, using several methods: optical microscopy, X-ray diffraction (texture), Vickers hardness and tensile testing. The 50% cold rolled and recrystallized material has been further studied in terms of sheet metal formability and texture evolution during the actual stamping of a steel toecap that has been used to validate the finite element simulations. (C) 2008 Elsevier B.V. All rights reserved.