Estratégias para redução de girassol ornamental para comercialização em vaso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Far-red light filtering by plastic film, greenhouse-cladding materials: effects on growth and flowering in Petunia and Impatiens

Photoselective plastic films with low transmission to far-red (FR) light (700-800 nm) are now available so that plants grown in greenhouses clad with such plastics exhibit reduced stem extension and, consequently, plant height. Here we compare the action of three FR-absorbing polythene films on extension growth of Petunia (Petunia X hybrida) cv. 'Express Blue' and Impatiens walleriana cv. 'Accent Deep Pink' with plants grown under a control polythene film (standard UVI/EVA film). Half of the plants under the control film were treated with a chemical plant growth regulator (PGR; diaminozide, B-Nine) and half were sprayed with water alone. Possible negative effects of such film plastics on flowering, and on fresh and dry weight accumulation, were also quantified. Plants were harvested destructively when all plants in each treatment had reached the first open flower stage. In Petunia, plant height was reduced by all three FR-filtering films and by PGR-treatment. The FR-filtering films giving the highest R:FR ratios also reduced plant height in Impatiens. Leaf number, leaf area and total dry Weight in both species. were greatest in the controls and smallest under films with the lowest PAR transmission. The film giving the highest R:FR ratio and PAR transmission also produced the most compact Petunia plants;, while the film. with. the lowest PAR transmission produced the least compact plants in both species. There was no significant effect of treatments on time to first flower in Impatiens. However, Petunia plants under low PAR transmission films took longer to flower. Plastic-films which filter out FR light to increase the R:FR ratio, combined With high PAR transmission, can therefore be used as an alternative to conventional PGRs.

Compatibilidad de Eretmocerus mundus Mercet (Hymenoptera: Aphelinidae) y Amblyseius swirskii Athias-Henriot (Acari: Phytoseiidae), importantes enemigos naturales de la mosca blanca Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) en cultivos hortícolas, con nuevas barreras físicas selectivas y modernos plaguicidas

Los programas de Gestión Integrada de Plagas (GIP) promueven el uso de estrategias de control que sean respetuosas con el medio ambiente, sin embargo el uso de insecticidas en los cultivos hortícolas sigue siendo necesario para el control de determinadas plagas, como es el caso de la mosca blanca Bemisia tabaci (Gennadius). Por ello, el objetivo de esta tesis es el estudio de la integración de las tres estrategias de control más empleadas hoy en día para el control de plagas: el control biológico, el físico y el químico. Una primera parte de este trabajo ha consistido en el estudio de los efectos letales y subletales de once insecticidas, aplicados a la dosis máxima de campo, sobre los enemigos naturales Eretmocerus mundus Mercet y Amblyseius swirskii Athias-Henriot, mediante ensayos de laboratorio y persistencia (laboratorio extendido). Para la evaluación de la toxicidad de los insecticidas sobre los estados de vida más protegidos de estos enemigos naturales, se trataron bajo la Torre de Potter las pupas de E. mundus y los huevos de A. swirskii. Además, se llevaron a cabo ensayos de contacto residual para determinar los efectos letales y subletales de estos insecticidas sobre el estado adulto de ambas especies de enemigos naturales. Para ello, los pesticidas se aplicaron sobre placas de cristal (laboratorio) o sobre plantas (laboratorio extendido: persistencia). Los resultados mostraron que los insecticidas flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen y spirotetramat eran compatibles con el estado de pupa de E. mundus (OILB 1: Inocuos). Sin embargo, abamectina, deltametrina y emamectina fueron categorizadas como ligeramente tóxicas (OILB 2) al causar efectos deletéreos. Los dos pesticidas más tóxicos fueron spinosad y sulfoxaflor, los cuales redujeron significativamente la emergencia de las pupas tratadas (OILB 4: Tóxicos). Flonicamida, flubendiamida, metoxifenocida y spiromesifen fueron compatibles con el estado adulto de E. mundus (OILB 1: Inocuos). Abamectina, deltametrina, emamectina, metaflumizona y spiromesifen pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Al contrario, spinosad y sulfoxaflor no resultaron ser compatibles (OILB D: Persistentes), aunque la realización de ensayos adicionales es necesaria para ver los efectos de los mismos en campo. Todos los insecticidas estudiados, excepto el spirotetramat (OILB 2: Ligeramente tóxico), fueron selectivos para el estado de huevo de A. swirskii (OILB 1: Inocuos). Flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen, spirotetramat y sulfoxaflor, fueron compatibles con el estado adulto de A. swirskii (OILB 1: Inocuos). Abamectina, deltametrina, emamectina y spinosad pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Entre las nuevas estrategias de la GIP, los plásticos y mallas fotoselectivas han demostrado ser una herramienta importante para el control de plagas y enfermedades en cultivos hortícolas protegidos. Por ello, en una segunda parte de este trabajo, se estudiaron tanto los efectos directos, como la combinación de efectos directos y mediados por planta y plaga de ambientes pobres en luz UV, en presencia o ausencia del Virus del rizado amarillo del tomate (TYLCV), sobre E. mundus. En primer lugar, se realizó un ensayo al aire libre para la evaluación de la capacidad de vuelo de E. mundus en cajas tipo túnel (1 x 0,6 x 0,6 m) cubiertas con distintas barreras absorbentes de luz UV. Se detectó un efecto directo en la capacidad de orientación de E. mundus, debido a que este parasitoide utiliza estímulos visuales para localizar a sus huéspedes, únicamente en las barreras que bloqueaban más del 65% de la luz UV (malla G). En segundo lugar, bajo condiciones de invernadero, se evaluó la combinación de efectos directos y mediados por planta y plaga sobre E. mundus, usando plantas de tomate sanas o infectadas con el TYLCV y cajas (30 x 30 x 60 cm) cubiertas con los distintos plásticos fotoselectivos. En este caso, no se observó ningún efecto en la capacidad benéfica del parasitoide cuando este estaba en contacto con plantas de tomate infestadas con ninfas de B. tabaci, lo que demuestra que este insecto usa estímulos táctiles para encontrar a sus huéspedes a cortas distancias. Además, las diferentes condiciones de radiación UV estudiadas tuvieron cierto impacto en la morfología, fisiología y bioquímica de las plantas de tomate, infestadas o no con el virus de la cuchara, detectándose pequeñas alteraciones en alguno de los parámetros estudiados, como el peso fresco y seco, el contenido en H y el espesor de las cutículas y de las paredes celulares de la epidermis foliar. Por último, no se observaron efectos de la radiación UV mediados por planta, ni en B. tabaci ni en su parasitoide, E. mundus. En una tercera parte, se evaluaron los efectos de una malla tratada con bifentrin sobre ambos enemigos naturales, en ensayos de laboratorio, semicampo y campo. Las mallas tratadas fueron diseñadas originariamente para el control de mosquitos vectores de la malaria, y actualmente se está trabajando para su uso en agricultura, como una nueva estrategia de control de plagas. En ensayos de laboratorio, cuando adultos de E. mundus y A. swirskii se expusieron por contacto durante 72 horas con la malla tratada (cajas de 6 cm diámetro), se registró una alta mortalidad. Sin embargo, en el ensayo de preferencia, estos enemigos naturales no fueron capaces de detectar la presencia de bifentrin y, en aquellos individuos forzados a atravesar la malla tratada, no se observó mortalidad a corto plazo (72 horas). En estudios de semicampo, llevados a cabo bajo condiciones de invernadero en cajas de 25 x 25 x 60 cm de altura, la capacidad benéfica de E. mundus no se vio afectada. Finalmente, en ensayos de campo llevados a cabo en invernaderos comerciales (4000m2) en Almería, A. swirskii no se vio afectado por la presencia en el cultivo de la malla tratada con bifentrin y los niveles de infestación de B. tabaci y F. occidentalis detectados bajo dicha malla, fueron inferiores a los del control. Por último, se ha evaluado la composición de la microflora bacteriana de tres especies de parasitoides, E. mundus, Eretmocerus eremicus Rose & Zolnerowich y Encarsia formosa Gahan, y la influencia de la misma en su susceptibilidad a insecticidas. Se llevó a cabo una extracción total de ADN de los insectos y la región variable V4 del ARNr se amplificó usando cebadores universales bacterianos. Para identificar las secuencias de los géneros bacterianos presentes en los parasitoides, se realizó una Next Generation sequencing (Illumina sequencing). Una vez identificados los géneros bacterianos, el gen ADNr 16S de las Actinobacterias se amplificó del ADN extraído de los insectos, usando cebadores universales bacterianos y específicos de Actinobacterias, y los productos de la Nested PCR fueron clonados para identificar todas las especies del género Arthrobacter. Tres bacterias (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi y A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), próximas a las especies de Arthrobacter presentes en los parasitoides, se obtuvieron de la colección bacteriana del BCCMTM/LMG y se midió su actividad esterasa. Finalmente, se realizaron ensayos con antibióticos (tetraciclina) y de contacto residual con insecticidas (abamectina) para determinar la influencia de las especies de Arthrobacter en la susceptibilidad de E. mundus a insecticidas. Los resultados muestran que este género bacteriano puede afectar a la toxicidad de E. mundus a abamectina, mostrando la importancia de la comunidad microbiana en enemigos naturales, factor que debe ser considerado en los estudios de evaluación de los riesgos de los insecticidas. ABSTRACT Integrated Pest Management (IPM) programs promote the use of control strategies more respectful with the environment; however the use of insecticides in vegetable crops is still needed to control certain pests, such as the whitefly Bemisia tabaci (Gennadius). Therefore, the objective of this work is to study the integration of the three most commonly used pest control strategies nowadays: biological, physical and chemical control. Firstly, the lethal and sublethal effects of eleven insecticides, applied at their maximum field recommended concentration, on the parasitic wasp Eretmocerus mundus Mercet and the predator Amblyseius swirskii Athias-Henriot has been assessed in the laboratory and in persistence tests (extended laboratory). To test the effects of pesticides on the most protected life stage of these natural enemies, E. mundus pupae and A. swirskii eggs were sprayed under a Potter precision spray tower. Laboratory contact tests were therefore conducted to determine the lethal and sublethal effects of these pesticides on the adult stage of these natural enemies. In the residual contact tests the pesticides were applied on glass plates (laboratory) or plants (extended laboratory: persistence). The study showed that the insecticides flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen and spirotetramat were selective for E. mundus pupae (IOBC 1: Harmless). Nevertheless, abamectin, deltamethrin and emamectin were categorized as slightly harmful (IOBC 2) due to the deleterious effects caused. The two most harmful pesticides were spinosad and sulfoxaflor, which significantly reduced the adult emergence from treated pupae (IOBC 4: Harmful). Flonicamid, flubendiamide, methoxyfenozide and spiromesifen were compatible with E. mundus adults (IOBC 1: Harmless). Base on the duration of the harmful activity, abamectin, deltamethrin, emamectin, metaflumizone and spirotetramat could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. On the contrary, spinosad and sulfoxaflor were not compatible (IOBC D: persistent), although additional studies are required to determine their effects under field conditions. All the pesticides tested, except spirotetramat (IOBC 2: Slightly harmful), were selective for A. swirskii eggs (IOBC 1: Harmless). Flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen, spirotetramat and sulfoxaflor were compatible with A. swirskii adults (IOBC 1: Harmless). However, abamectin, deltamethrin, emamectin and spinosad could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. Among new IPM strategies, UV-absorbing photoselective plastic films and nets have been shown to be an important tool for the control of pests and diseases in horticultural protected crops. Because of that, we secondly studied the plant and pest insect-mediated and/or the direct effects on E. mundus under different UV radiation conditions, in presence or absence of the Tomato Yellow Leaf Curl Virus (TYLCV). In the first experiment, performed outdoors, the flight activity of E. mundus was studied in one-chamber tunnels (1 x 0.6 x 0.6 m) covered with different photoselective barriers. Because E. mundus uses visual cues for host location at a long distance, a direct effect on its host location ability was detected, but only in the UV-absorbing barriers blocking more than 65% of the UV light (G net). In a second experiment, the direct and plant and pest insect-mediated effects of different UV radiation conditions on E. mundus were studied, inside cages (30 x 30 x 60 cm) covered with the different UVplastic films and under greenhouse conditions, using healthy or TYLCV-virus infected tomato plants. In this case, not any effect on the beneficial capacity of this parasitoid was detected, proving that he uses tactile cues at a short distance of the host. Moreover, the different UV radiation conditions studied had a certain direct impact in the morphology, physiology and biochemistry of tomato plants infested or not with the TYLCV, and small alterations in some parameters such as fresh and dry weight, H percentage and cuticle and cell wall thickness of epidermal cells of the leaves, were detected. Finally, none plant-mediated UV effects neither in the whitefly B. tabaci nor in their parasitic wasp were found. Thirdly, the effects of a bifenthrin treated net were evaluated in different laboratory, semi-field and field experiments on the natural enemies studied. Treated nets were developed long time ago aiming at the control of the mosquitoes vectors of malaria, and nowadays, there is a great interest on assessing the possibility of their use in agriculture. In laboratory assays, a high mortality was recorded when E. mundus and A. swirskii adults were exposed by contact to the bifenthrin treated net for 72 hours in small cages (12 cm diameter). However, these natural enemies were not able to detect the presence of bifenthrin in a dual-choice test and no short-term mortality (72 hours) was recorded in those individuals that went through the treated net. In semi-field assays, performed under greenhouse conditions with cages of 25 x 25 x 60 cm high, the beneficial capacity of E. mundus was not affected. Finally, in field assays carried out in commercial multispan greenhouses (4000 m2) in Almería, A. swirskii was not affected by the presence of the bifenthrin treated net in the crop and the B. tabaci and F. occidentalis infestation levels were significantly lower than in the control. Finally, the composition of the microflora present in three species of parasitoids, E. mundus, Eretmocerus eremicus Rose & Zolnerowich and Encarsia formosa Gahan, and its influence in their susceptibility to insecticides, have been assessed. A total DNA extraction was performed on insects and universal bacterial primers were used to amplify the variable V4 region of the rRNA. A Next Generation sequencing (Illumina sequencing) was performed to identify the sequences of the bacterial genera present in the parasitic wasps. Once, the bacterial genera were identified, 16S rDNA gene of Actinobacteria were amplified from insects DNA extracts using the universal bacterial and actinobacterial primers, and the nested PCR products, were cloned to identify the Arthrobacter species. Three bacteria (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi and A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), having the closest match with the Arthrobacter species present in the parasitic wasps, were obtained from the BCCMTM/LMG bacteria collection and its esterase activity was measured. Finally, antibiotic and residual contact tests were done to determine the influence of Arthrobacter species in the susceptibility of E. mundus to pesticides (abamectin). The results suggest that this bacterial genus can affect the toxicity of E. mundus to abamectin, which in turn supports the importance of the microbial community in natural enemies that it should be considered as a factor in risk assessment tests of pesticides.

Growth, yield and development of strawberry cv. 'Elsanta' under novel photoselective film clad greenhouses

Film greenhouse claddings are typically used to protect horticultural crops from low temperature and high rainfall conditions. However, a range of novel plastic films have been developed which filter specific radiation wavelengths with the aim of providing the grower with greater control of crop growth and development. A replicated experiment was conducted in 8 small experimental greenhouses, covered with different photoselective films characterised by a range of red/far-red ratios and PAR transmissions to study their effects on the growth, yield and quality of the strawberry cv. 'Elsanta'. Marketable yield per plant was 51% greater under the film with the highest light transmission (control) compared with the lower light transmission films. Similarly, unmarketable fruit number and average non-marketable individual fruit weight per plant was lowest under films with higher light transmissions and higher under lower light transmission films. Cropping duration was longer under films with high R/FR. Also plants under high R/FR were more compact (due to shorter petiole lengths) compared to plants grown under low R/FR. The results are discussed in relation to the increased use of photoselective films in protected horticulture and the need for higher quality fruit and vegetables.

Analysis of the tip roundness effects on the micro- and macroindentation response of elastic-plastic materials

In this work, the effects of indenter tip roundness oil the load-depth indentation curves were analyzed using finite element modeling. The tip roundness level was Studied based on the ratio between tip radius and maximum penetration depth (R/h(max)), which varied from 0.02 to 1. The proportional Curvature constant (C), the exponent of depth during loading (alpha), the initial unloading slope (S), the correction factor (beta), the level of piling-up or sinking-in (h(c)/h(max)), and the ratio h(max)/h(f) are shown to be strongly influenced by the ratio R/h(max). The hardness (H) was found to be independent of R/h(max) in the range studied. The Oliver and Pharr method was successful in following the variation of h(c)/h(max) with the ratio R/h(max) through the variation of S with the ratio R/h(max). However, this work confirmed the differences between the hardness values calculated using the Oliver-Pharr method and those obtained directly from finite element calculations; differences which derive from the error in area calculation that Occurs when given combinations of indented material properties are present. The ratio of plastic work to total work (W(p)/W(t)) was found to be independent of the ratio R/h(max), which demonstrates that the methods for the Calculation of mechanical properties based on the *indentation energy are potentially not Susceptible to errors caused by tip roundness.

Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materials through factorial design of experiment

In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.

Evolution of magnetic properties and crystallographic texture in electrical steel with large plastic deformation

Deformation leads to a hardening of steel due to an increase in the density of dislocations and a reduction in their mobility, giving rise to a state of elevated residual stresses in the crystal lattice. In the microstructure, one observes an increase in the contribution of crystalline orientations which are unfavorable to the magnetization, as seen, for example, by a decrease in B(50), the magnetic flux density at a field of 50 A/cm. The present study was carried out with longitudinal strips of fully processed non-oriented (NO) electrical steel, with deformations up to 70% resulting from cold rolling in the longitudinal direction. With increasing plastic deformation, the value of B(50) gradually decreases until it reaches a minimum value, where it remains even for larger deformations. On the other hand, the coercive field H(c) continually increases. Magnetometry results and electron backscatter diffraction results are compared and discussed. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3560895]

A discussion on volume change in the plastic phase

This technical note discusses the possibility of using a more simplified scheme to estimate the plastic multiplier when some material shows volume changes, e.g. soil, balsa wood foam and other similar materials. Two procedures regarding volume changes during the plastic phase are discussed here. The first one is the classic procedure applied to non-associative plasticity, for which a Drucker-Prager-like surface is adopted to represent the plastic potential. For the second procedure, the plastic potential is not explicitly known, however, its orthogonal direction is chosen respecting a plastic volume change parameter similar to Poisson`s ratio. Copyright (C) 2007 John Wiley & Sons, Ltd.

Consolidation of elastic-plastic saturated porous media by the boundary element method

This paper presents a domain boundary element formulation for inelastic saturated porous media with rate-independent behavior for the solid skeleton. The formulation is then applied to elastic-plastic behavior for the solid. Biot`s consolidation theory, extended to include irreversible phenomena is considered and the direct boundary element technique is used for the numerical solution after time discretization by the implicit Euler backward algorithm. The associated nonlinear algebraic problem is solved by the Newton-Raphson procedure whereby the loading/unloading conditions are fully taken into account and the consistent tangent operator defined. Only domain nodes (nodes defined inside the domain) are used to represent all domain values and the corresponding integrals are computed by using an accurate sub-elementation scheme. The developments are illustrated through the Drucker-Prager elastic-plastic model for the solid skeleton and various examples are analyzed with the proposed algorithms. (c) 2008 Elsevier B.V. All rights reserved.

Characterization of the elastic-plastic region in AISI/SAE 1070 steel by the magnetic barkhausen noise

The magnetic Barkhausen energy in the rolling and transversal directions of AISI/SAE 1070 annealed surfaces is studied. The measurements were made in the samples under applied tension in the elastic-plastic region for different angular directions. The outcomes evidence that the magnetic anisotropy coefficient can be used to characterize the linear and nonlinear elastic limits of the material tinder tensile tresses. The results also show that the area of the curve corresponding to the angular dependence of the number of Barkhausen jumps with average energy presents a maximum value that corresponds to the elastic limit of the sample. (C) 2008 Elsevier Ltd. All rights reserved.

Nondestructive inspection of plastic deformation in commercial carbon steels using magnetic Barkhausen noise

The present work shows measurements of the Magnetic Barkhausen Noise (MBN) in commercial AISI/SAE 1045 and ASTM 36 steel deformed samples. The correlation between the MBN root mean square, Barkhausen signal profile and MBN power spectrum with the plastic deformation is established. The results show that the power spectral density of the Barkhausen signal is more effective as nondestructive evaluator than root mean square of Barkhausen signal. The Outcomes also suggest the presence of unbalanced tensions between the surface and the bulk of sample due to the presence of plastic deformation.

A study of plastic deformation around a defect using the magnetic Barkhausen noise in ASTM 36 steel

The present work presents the measurements of the magnetic Barkhausen noise (MBN) in ASTM 36 steel samples around a pit under plastic deformation. The contour maps obtained from these Barkhausen noise measurements are compared with the finite element analysis of the ideal plastic deformation. Also, a parameter of the Barkhausen signal to detect the plastic deformation around the pit in ASTM 36 steel is obtained. Additionally to that, we propose another MBN parameter to estimate the pit width using the Barkhausen noise. (c) 2007 Elsevier Ltd. All rights reserved.

A numerical investigation on the visco-plastic response of structures to different pulse loading shapes

The time varying intensity character of a load applied to a structure poses many difficulties in analysis. A remedy to this situation is to substitute a complex pulse shape by a rectangular equivalent one. It has been shown by others that this procedure works well for perfectly plastic elementary structures. This paper applies the concept of equivalent pulse to more complex structures. Special attention is given to the material behavior, which is allowed to be strain rate and strain hardening sensitive. Thanks to the explicit finite element solution, it is shown in this article that blast loads applied to complex structures made of real materials can be substituted by equivalent rectangular loads with both responses being practically the same. (c) 2007 Elsevier Ltd. All rights reserved.

Modeling of Plastic Deformation Effects in Ferromagnetic Thin Films

To explain the magnetic behavior of plastic deformation of thin magnetic films (Fe and permalloy) on an elastic substrate (nitinol), it is noted that unlike in the bulk, the dislocation density does not increase dramatically because of the dimensional constraint. As a result, the resulting residual stress, even though strain hardening is limited, dominates the observed magnetic behavior. Thus, with the field parallel to the stress axis, the compressive residual stress resulting from plastic deformation causes a decrease in remanence and an increase in coercivity; and with the field perpendicular to the stress axis, the resulting compressive residual stress causes an increase in remanence and a decrease in coercivity. These elements have been inserted into the model previously developed for plastic deformation in the bulk, producing the aforementioned behavior, which has been observed experimentally in the films.

Impact of plastic deformation on magnetoacoustic properties of Fe-2%Si alloy

The paper presents the results of a complementary study including magnetic hysteresis loops B(H), magnetic Barkhausen noise (MBN) and magnetoacoustic emission (MAE) signals measurements for plastically deformed Fe-2%Si samples. The investigated samples had been plastically deformed with plastic strain level (epsilon(p)) up to 8%. The properties of B(H) loops are quantified using the coercivity H(C) and maximum differential permeability mu(rmax) as parameters. The MBN and MAE voltage signals were analysed by means of rms-like voltage (Ub and Ua, respectively) envelopes, plotted as a function of applied field strength. Integrals of the Ub and Ua voltages over half of a period of magnetization were then calculated. It has been found that He and integrals of Ub increase, while mu(rmax) decreases monotonically with increasing epsilon(p). The MAE (Ua) peak voltage at first decreases, then peaks at epsilon(p) approximate to 1.5% and finally decreases again. The integral of the Ua voltage at first increases for low epsilon(p) and then decreases for epsilon(p) > 1.5%. All those various dependence types suggest the possibility of detection of various stages of microstructure change. The above-mentioned results are discussed qualitatively in the paper. Some modelling of the discussed dependency is also presented. (C) 2008 Elsevier Ltd. All rights reserved.