Structural analysis of the vegetation on a highland granitic rock outcrop in Southeast Brazil

Granitic rock outcrops of the Brazilian southeast are either coastal or inland. The latter can often have high altitudes, such as in the summits of "Serra do Mar" and "Serra da Mantiqueira", where they are known as "Campos de Altitude". The landscape on these high altitude plateaux is often a mosaic of shrubs and treelets within a bunchgrass matrix, with sparse pteridophytes and other herbs, interspersed with variable extensions of rock outcrops. Despite the pervasiveness of rock outcrops in the Brazilian landscape, studies on the structural analysis of the vegetation on such formations are scarce. This study aimed to analyze the structure of the vegetation on a highland granitic rock outcrop in "Parque Estadual da Serra do Brigadeiro", state of Minas Gerais, Southeast Brazil (42°20' - 42°40' S and 20°20' - 21°00' W, 1,722 m of elevation ). Quantitative parameters of absolute and relative frequency and dominance (cover) were estimated. The group analysis used the Jaccard similarity index. Trilepis lhotzkiana, Panicum sp. 1, and Vellozia variegata presented the highest relative frequencies, relative dominances and importance values. These three species, along with Dyckia bracteata, Rhynchospora emaciate, and Tibouchina cf. manicata, represented 98.3% of the relative dominance. The remaining 1.7% referred to 22 remaining species. The distinction among quadrats within formed groups by cluster analysis was due to the great number of low frequency species.

An experimental/numerical study of the turbulent boundary layer development along a surface with a sudden change in roughness

A theory for the description of turbulent boundary layer flows over surfaces with a sudden change in roughness is considered. The theory resorts to the concept of displacement in origin to specify a wall function boundary condition for a kappa-epsilon model. An approximate algebraic expression for the displacement in origin is obtained from the experimental data by using the chart method of Perry and Joubert(J.F.M., vol. 17, pp. 193-122, 1963). This expression is subsequently included in the near wall logarithmic velocity profile, which is then adopted as a boundary condition for a kappa-epsilon modelling of the external flow. The results are compared with the lower atmospheric observations made by Bradley(Q. J. Roy. Meteo. Soc., vol. 94, pp. 361-379, 1968) as well as with velocity profiles extracted from a set of wind tunnel experiments carried out by Avelino et al.( 7th ENCIT, 1998). The measurements are found to be in good agreement with the theoretical computations. The skin-friction coefficient was calculated according to the chart method of Perry and Joubert(J.F.M., vol. 17, pp. 193-122, 1963) and to a balance of the integral momentum equation. In particular, the growth of the internal boundary layer thickness obtained from the numerical simulation is compared with predictions of the experimental data calculated by two methods, the "knee" point method and the "merge" point method.

Efectividad de la ketamina en depresión bipolar: revisión sistemática de la literatura

Introducción: Aunque el hallazgo clínico más distintivo del Trastorno Afectivo Bipolar es el ánimo patológicamente elevado, este no suele ser el estado de ánimo prevalente de la enfermedad. La fase depresiva del trastorno o depresión bipolar es más crónica, conlleva a un mayor deterioro de la funcionalidad y representa un reto terapéutico habitual. En la actualidad, el manejo farmacológico de la depresión bipolar suele consistir en combinaciones de al menos dos medicamentos distintos, incluyendo estabilizadores del afecto (litio y anticonvulsivantes), antipsicóticos atípicos y antidepresivos. El objetivo central de este trabajo es evaluar la efectividad de la Ketamina en la depresión bipolar. Métodos: Revisión sistemática de la literatura de artículos que proporcionen información sobre la eficacia de la Ketamina en la fase depresiva del Trastorno Bipolar. Resultados: De los 147 artículos arrojados por la búsqueda, dos cumplieron los criterios de selección (n=33). En comparación con placebo, ketamina tiene un efecto antidepresivo rápido y duradero, incluso en pacientes que han recibido más de 3 medicamentos previamente. No se reportaron efectos adversos severos durante los estudios. Discusión. La evidencia actual apunta a que la ketamina es útil para el manejo de la depresión bipolar, incluso cuando es resistente al tratamiento, es segura y puede tener cierto efecto antisuicida. Es necesario ampliar la evidencia existente.

Segurança do paciente no sistema de medicação: análise de enfermeiros de um hospital de ensino

This study aimed to identify and describe the factors related to Patient Safety in a medication system according to the nurses analysis in a teaching hospital from the photographic analysis method. This was a cross-sectional, descriptive study with mixed approach in a teaching hospital in Rio Grande do Norte. The population consisted of 42 nurses from inpatient units, of which 34 composed the study sample. As eligibility criteria, we defined nurses from public service and nurses who agreed to participate. Ethical determinations were observed, the study was submitted to the Ethics and Research of the University Hospital Onofre Lopes, obtaining the assent with ethical assessment certificate (CAAE 0098.0.051.294-11). For data collection, we used the photographic method (Photographic Analysis Technique) by Patricia Marck (Canada). It was developed in two phases: at first, we randomly captured photos from the medication system, resulting in 282 images; then we selected/processed the photographs, which were reduced to 10 images in Microsoft Excel 2010; in the second phase, the nurses answered the questionnaire divided into socio-professional profile and Digital Photography Scoring Tool (questions a and b ). For analysis of the question a , we used the content analysis technique, and for b , we used the Statistical Package for the Social Sciences 20.0 (temporary license). The socio-professional profile revealed the predominance of females; age group 34-43 years; professionals with specialization; 10-18 years of length of service; and nurses working exclusively in the hospital and who know the Patient Safety. The photographic analysis in relation to Patient Safety resulted in specific categories for each stage of the medication system. Regarding disposal, we identified Proper verification ; Improper verification ; Correct identification ; Disposal in single doses ; and Improper Environment , with predominance of that last category. As for storage: Proper storage ; Improper storage ; Risk of exchange/disappearance ; and Poor hygiene , with special reference to improper storage. In preparation: Risk of exchanging medication/patient ; Inappropriate physical space ; and Inadequate 9 preparation of controlled drugs , highlighting the first category. In drug administration: Lack of Personal Protective Equipment ; Use of Personal Protective Equipment ; Improper administration technique ; Proper administration technique ; Correct drug identification ; Incorrect drug identification ; and Peripheral venous access without identification . From the safety assessment of 10 photographs, by adapting the scores (1-10) to the Likert Scale, we identified three Totally Unsafe (Level 1), three Unsafe (Level 2), three Partially Safe (Level 3), one Safe (Level 4), and no photograph considered Totally Safe. This study identified the prevalence of unsafety in the medication system in the nurses opinion. We were also able to understand that, although nurses identify safety aspects, the most prevalent categories characterize an unsafe assessment. Nursing needs to reflect on its practice, identifying gaps in the medication system in order to achieve a proper and safe care

A.S.T.M. manual on presentation of data : including Supplement A ... Supplement B ... Tables of squares and square roots /

Manual "originally issued in 1933; two supplements covering additonal material ... issued separately in 1935 ... combining this material in one volume and amplifying certain sections of the text"--Fore. to second printing, March, 1937.

The use of solar colletor for heating and electricity for a single family house

The presented work is related to the use of solar energy for the needs of heating and electricity for a single house located in Poland. Electricity will provided by energy conversion in the turbine by means of Organic Rankine Cycle (ORC), in which the operating medium (water heated in solar collector) is heating refrigerator in the heating exchanger. The solar installation is integrated with heat accumulator and wood boiler, which is used in the situation that collector is not enough to fill requirements of thermal comfort. There are chosen also all the necessary components of the system. In the work is also performed the economic assessment, by F chart method, to evaluate the profitability of the project, taking into total costs and savings.

Evaluation of a photographic method to measure dental angulation

Objetivo: analisar a confiabilidade e reprodutibilidade de um método simplificado para análise da angulação dentária que faz uso de fotografias digitalizadas de modelos de gesso. Métodos: foram realizadas fotografias digitalizadas e padronizadas de modelos de gesso, posteriormente transportadas para um programa gráfico de leitura de ângulos, para a obtenção das medidas. Tais procedimentos foram repetidos para avaliação do erro do método casual e para a análise da reprodutibilidade por meio da Correlação Intraclasse. A amostra constituiu-se de 12 indivíduos com dentição permanente completa e não tratados ortodonticamente, sendo seis do sexo masculino e seis do feminino. As análises foram feitas bilateralmente, gerando 24 medidas. Resultados: o erro casual mostrou uma variação de 0,77 a 2,55º para a angulação dos dentes. A análise estatística revelou que o método apresenta uma excelente reprodutibilidade (r = 0,65 - 0,91; p < 0,0001) para todos os dentes, exceto para os pré-molares superiores, mas ainda assim estatisticamente significativa (p < 0,001). Conclusão: o método proposto apresenta confiabilidade suficiente para justificar seu uso no desenvolvimento de pesquisas científicas, bem como na prática clínica.

Validation and long-term evaluation of a modified on-line chiral analytical method for therapeutic drug monitoring of (R,S)-methadone in clinical samples.

Matrix effects, which represent an important issue in liquid chromatography coupled to mass spectrometry or tandem mass spectrometry detection, should be closely assessed during method development. In the case of quantitative analysis, the use of stable isotope-labelled internal standard with physico-chemical properties and ionization behaviour similar to the analyte is recommended. In this paper, an example of the choice of a co-eluting deuterated internal standard to compensate for short-term and long-term matrix effect in the case of chiral (R,S)-methadone plasma quantification is reported. The method was fully validated over a concentration range of 5-800 ng/mL for each methadone enantiomer with satisfactory relative bias (-1.0 to 1.0%), repeatability (0.9-4.9%) and intermediate precision (1.4-12.0%). From the results obtained during validation, a control chart process during 52 series of routine analysis was established using both intermediate precision standard deviation and FDA acceptance criteria. The results of routine quality control samples were generally included in the +/-15% variability around the target value and mainly in the two standard deviation interval illustrating the long-term stability of the method. The intermediate precision variability estimated in method validation was found to be coherent with the routine use of the method. During this period, 257 trough concentration and 54 peak concentration plasma samples of patients undergoing (R,S)-methadone treatment were successfully analysed for routine therapeutic drug monitoring.

Rapid Biodiversity Assessment and Monitoring Method for Highly Diverse Benthic Communities: A Case Study of Mediterranean Coralligenous Outcrops

Increasing anthropogenic pressures urge enhanced knowledge and understanding of the current state of marine biodiversity. This baseline information is pivotal to explore present trends, detect future modifications and propose adequate management actions for marine ecosystems. Coralligenous outcrops are a highly diverse and structurally complex deep-water habitat faced with major threats in the Mediterranean Sea. Despite its ecological, aesthetic and economic value, coralligenous biodiversity patterns are still poorly understood. There is currently no single sampling method that has been demonstrated to be sufficiently representative to ensure adequate community assessment and monitoring in this habitat. Therefore, we propose a rapid non-destructive protocol for biodiversity assessment and monitoring of coralligenous outcrops providing good estimates of its structure and species composition, based on photographic sampling and the determination of presence/absence of macrobenthic species. We used an extensive photographic survey, covering several spatial scales (100s of m to 100s of km) within the NW Mediterranean and including 2 different coralligenous assemblages: Paramuricea clavata (PCA) and Corallium rubrum assemblage (CRA). This approach allowed us to determine the minimal sampling area for each assemblage (5000 cm² for PCA and 2500 cm²for CRA). In addition, we conclude that 3 replicates provide an optimal sampling effort in order to maximize the species number and to assess the main biodiversity patterns of studied assemblages in variability studies requiring replicates. We contend that the proposed sampling approach provides a valuable tool for management and conservation planning, monitoring and research programs focused on coralligenous outcrops, potentially also applicable in other benthic ecosystems

The purpose and use of passenger ships in 2058 - Future scenarios generated by the Delphi method

The purpose of the thesis is to generate scenarios of future purposes and of use of ships, suitable for STX Finland Cruise Oy to design and build, over a 50 year time span by applying the Delphi method and an open innovation approach in a future workshop. The scenarios were mapped out with help of two Delphi survey rounds and one future workshop. The number of participants in both surveys and the workshop was some twenty experts in each, representing various fields. On the basis of the first survey round, four different subject areas were selected for analysis: purposes for the use of ships; energy efficiency of cruises and ships; cost efficiency of sea transportation and vacation; and the views and expectations of the customers in the future. As a result of the future workshop, four different themes were established, which were studied further during the second Delphi round. The themes are future service and operation concepts; versatile uses of the space in ships; communication of environmental benefits of ships, future energy solutions and social interaction between passengers onboard. In addition to generating the scenarios, further aim of the thesis is to implement the Delphi method and workshop activity as foresight tools for STX Europe and to produce a chart of a future shipbuilding foresight community to can serve the open innovation processes in the maritime cluster as a whole.

Optimal 3D surface reconstruction from multiview photographic images

This paper describes a new method for reconstructing 3D surface using a small number, e.g. 10, of 2D photographic images. The images are taken at different viewing directions by a perspective camera with full prior knowledge of the camera configurations. The reconstructed object's surface is represented a set of triangular facets. We empirically demonstrate that if the viewing directions are uniformly distributed around the object's viewing sphere, then the reconstructed 3D points optimally cluster closely on a highly curved part of the surface and are widely, spread on smooth or fat parts. The advantage of this property is that the reconstructed points along a surface or a contour generator are not undersampled or underrepresented because surfaces or contours should be sampled or represented with more densely points where their curvatures are high. The more complex the contour's shape, the greater is the number of points required, but the greater the number of points is automatically generated by the proposed method Given that the viewing directions are uniformly distributed, the number and distribution of the reconstructed points depend on the shape or the curvature of the surface regardless of the size of the surface or the size of the object.

3D surface point and wireframe reconstruction from multiview photographic images

This paper describes a new method for reconstructing 3D surface points and a wireframe on the surface of a freeform object using a small number, e.g. 10, of 2D photographic images. The images are taken at different viewing directions by a perspective camera with full prior knowledge of the camera configurations. The reconstructed surface points are frontier points and the wireframe is a network of contour generators. Both of them are reconstructed by pairing apparent contours in the 2D images. Unlike previous works, we empirically demonstrate that if the viewing directions are uniformly distributed around the object's viewing sphere, then the reconstructed 3D points automatically cluster closely on a highly curved part of the surface and are widely spread on smooth or flat parts. The advantage of this property is that the reconstructed points along a surface or a contour generator are not under-sampled or under-represented because surfaces or contours should be sampled or represented with more densely points where their curvatures are high. The more complex the contour's shape, the greater is the number of points required, but the greater the number of points is automatically generated by the proposed method. Given that the viewing directions are uniformly distributed, the number and distribution of the reconstructed points depend on the shape or the curvature of the surface regardless of the size of the surface or the size of the object. The unique pattern of the reconstructed points and contours may be used in 31) object recognition and measurement without computationally intensive full surface reconstruction. The results are obtained from both computer-generated and real objects. (C) 2007 Elsevier B.V. All rights reserved.

Photographic assessment of cephalometric measurements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new sampling strategy to reduce the effect of autocorrelation on a control chart

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of dental restorations: a comparative study between clinical and digital photographic assessments

The aim of this study was to compare the efficacy of a direct clinical evaluation method with an indirect digital photographic method in assessing the quality of dental restorations. Seven parameters (color, occlusal marginal adaptation, anatomy form, roughness, occlusal marginal stain, luster, and secondary caries) were assessed in 89 Class I and Class II restorations from 36 adults using the modified US Public Health Service/Ryge criteria. Standardized photographs of the same restorations were digitally processed by Adobe Photoshop software, separated into the following four groups and assessed by two calibrated examiners: Group A: The original photograph displayed at 100%, without modifications (IMG100); Group B: Formed by images enlarged at 150% (IMG150); Group C: Formed by digital photographs displayed at 100% (mIMG100), with digital modifications (levels adjustment, shadow and highlight correction, color balance, unsharp Mask); and Group D: Formed by enlarged photographs displayed at 150% with modifications (mIMG150), with the same adjustments made to Group C. Photographs were assessed on a calibrated screen (Macbook) by two calibrated clinicians, and the results were statistically analyzed using Wilcoxon tests (SSPS 11.5) at 95% CI. Results: The photographic method produced higher reliability levels than the direct clinical method in all parameters. The evaluation of digital images is more consistent with clinical assessment when restorations present some moderate defect (Bravo) and less consistent when restorations are clinically classified as either satisfactory (Alpha) or in cases of severe defects (Charlie). Conclusion: The digital photographic method is a useful tool for assessing the quality of dental restorations, providing information that goes unnoticed with the visual-tactile clinical examination method. Additionally, when analyzing restorations using the Ryge modified criteria, the digital photographic method reveals a significant increase of defects compared to those clinically observed with the naked eye. Photography by itself, without the need for enlargement or correction, provides more information than clinical examination and can lead to unnecessary overtreatment.