Electron petrography of fine-grained matrix in the Karoonda C4 carbonaceous chondrite

The study of matrices of rare Type 4 carbonaceous chondrites can reveal important information on parent body rnetamorp~ic processes and provide a comparison with processes on parent bodies of ordinary chc-idrites. Reflectance spectra (Tholen, 1984) from the two largest asteroids in the asteroid belt, Ceres and Pallas, suggest that they may be metamorphosed carbonaceous chondrites. These two asteroids constitute - onethird of the mass in the asteroid belt implying that type 4-6 carbonaceous chondrites are poorly represented in the meteorite collection and may be of considerable importance. The matrix of the C4 chondrite Karoonda has been investigated using a JEOL 2000FX analytical electron microscope (AEM) with an attached Tracor-Northem TN5500 energy dispersive spectrometer (EDS). In previous studies (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969), the petrography of the Karoonda matrix has been described as consisting largely of coarse-grained (50-200 urn in size) olivine and plagioclase (20-100 um in size), associated with micrometer sized magnetite and rare sulphides. AEM observations on matrix show that in addition to these large grains, there is a significant fraction (10 vol%) of interstitial fine grained phases « 5 urn). The mineralogy of these fine-grained phases differs in some respects from that of the coarser-grained matrix identified by optical and SEM techniques (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969). I~ particular crystals of two compositionally distinct pyroxenes « 2 urn in size) have been identified which have not been previously observed in Karoonda by other analytical techniques. Thin film microanalyses (Mackinnon et al., 1986) of these two pyroxenes indicate compositions consistent with augite and low-Ca pyroxene (- Fs27). Fine-grained anhedral olivine « 2 urn size) is the most abundant phase with composition -Fa29' This composition is essentially indistinguishable from that determined for coarser-grained matrix olivines using an electron microprobe (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969). All olivines are associated with subhedral magnetites « 1 urn size) which contain significant Cr (- 2%) and Al (- 1%) as was also noted for larger sized Karoonda magnetites by Delaney et al. (1985). It has recently been suggested (Burgess et al., 1987) on the basis of sulphur release profiles for S-isotope analyses of Karoonda that CaS04 (anhydrite) may be present. However, no sulphate phase has, as yet, been identified in the matrix of Karoonda. Low magnification contrast images suggest that Karoonda may have a significant porosity within the fine-grained matrix fraction. Most crystals are anhedral and do not show evidence for significant compaction. Individual grains often show single point contact with other grains which result in abundant intergranular voids. These voids frequently contain epoxy which was used as part of the specimen preparation procedure due to the friable nature of the bulk sample.

Integrating petrography, mineralogy and hydrochemistry to constrain the influence and distribution of groundwater contributions to baseflow in poorly productive aquifers: Insights from Gortinlieve catchment, Co. Donegal, NW Ireland

Identifying groundwater contributions to baseflowforms an essential part of surfacewater body characterisation. The Gortinlieve catchment (5 km2) comprises a headwater stream network of the Carrigans River, itself a tributary of the River Foyle, NW Ireland. The bedrock comprises poorly productive metasediments that are characterised by fracture porosity. We present the findings of a multi-disciplinary study that integrates new hydrochemical and mineralogical investigations with existing hydraulic, geophysical and structural data to identify the scales of groundwater flow and the nature of groundwater/bedrock interaction (chemical denudation). At the catchment scale, the development of deep weathering profiles is controlled by NE-SW regional scale fracture zones associated with mountain building during the Grampian orogeny. In-situ chemical denudation of mineral phases is controlled by micro- to meso-scale fractures related to Alpine compression during Palaeocene to Oligocene times. The alteration of primary muscovite, chlorite (clinochlore) and albite along the surfaces of these small-scale fractures has resulted in the precipitation of illite, montmorillonite and illite/montmorillonite clay admixtures. The interconnected but discontinuous nature of these small-scale structures highlights the role of larger scale faults and fissures in the supply and transportation of weathering solutions to/from the sites of mineral weathering. The dissolution of primarily mineral phases releases the major ions Mg, Ca and HCO3 that are shown to subsequently formthe chemical makeup of groundwaters. Borehole groundwater and stream baseflow hydrochemical data are used to constrain the depths of groundwater flow pathways influencing the chemistry of surface waters throughout the stream profile. The results show that it is predominantly the lower part of the catchment, which receives inputs from catchment/regional scale groundwater flow, that is found to contribute to the maintenance of annual baseflow levels. This study identifies the importance
of deep groundwater in maintaining annual baseflow levels in poorly productive bedrock systems.

Petrography and geochemistry of the McArthur Township area, Ontario /

The McArthur Township area in the Archean Abitibi Belt of northeast Ontario contains northwesterly trending volcanic rocks which are located on a limb of a large syncline. The axial trace of the syncline passes through the adjacent Douglas Township. The Archean volcanic rocks and associated sedimentary rocks are intruded and deformed by two large plutons and a few smaller hypabyssal intrusions. A petrographic and geochemical study of the Precambrian rocks exposed 1n the study area was undertaken in order to investigate the metamorphic grade and geochemical characteristics of the rocks. All the samples were studied with the microscope and analysis of 20 major and trace elements were determined on a selection of the less altered specimens by x-ray fluorescence. Three different periods of igneous activity have occurred in the study area. The first two periods were dominated by volcanic extrusive rocks accompanied by gabbroic sills. The third cycle is the diapiric intrusion of the granitic plutons and subsequent metamorphism of the older rocks to the low to medium grade. Two periods of sedimentation are also recognized in the study area which occurred after the first and second cycle of volcanism. Chemically, the lavas are subdivided into three main associations: (1) The komatiitic association is characterized by high MgO, high Ni, low Ti02 and a low FeO*/(FeO* + MgO) ratio. They occupy the base of each volcanic cycle and some of the flows exhibit spinifex textures. (2) The tholeiitic association displays distinct iron and titanium enrichment trends in the intermediate membersor -i r (3) The calc-alkaline association contains low FeO* and TI02 and high Ni contents relative to modern calc-alkaline types. They are formed at the end of each cycle of volcanism and overlie the tholeiitic flows. All three associations of the first volcanic cycle are exposed in the study area, while the second cycle is represented by a komatiltic sequence. The volcanic rocks were possibly formed by multiple partial melting of the Archean mantle to produce parental magmas under various P - T conditions.

Petrography, geochemistry and structure of the Timmins area, Ontario

Regional structural analysis of the Timmins area indicates four major periods of tectonic deformation. The DI deformation is characterized by a series of isoclinal FI folds which are outlined in the study area by bedding, pillow tops and variolitic flows. The D2 deformation developed the Porcupine Syncline and refolded the Fl folds about a NE. axis. A pervasive S2 foliation developed during low grade (greenschist) regional metamorphism associated with the D2 deformation. The S2 foliation developed south of the Destor-Porcupine Break. The third phase of tectonic D3 deformation is recognized by the development of a S3 sub-horizontal crenulation cleavage which developed on the plane of the S2 foliation. No meso scopic folds are associated with this deformation. The 8 3 crenulation cleavage is observed south of the Destor-Porcupine Break. The D4 tectonic deformation is recorded as a subvertical S4 crenulation cleavage which developed on the plane of the S2 foliation and also offsets the S3 crenulation cleavage. Macroscopic F4 folds have refolded the F2 axial plane. No metamorphic recrystallization is associated with this deformation. The S4 crenulation cleavage is observed south of the Destor-Porcupine Break. Petrographic evidence indicates that the Timmins area has been subjected to pervasive regional low grade (greenschist) metamorphism which has recrystallized the original mineralogy. South of the study are~ the Donut Lake ultramafic lavas have been subjected to contact medium grade (amphibolite facies) metamorphism associated with the intrusion of the Peterlong Lake Complex. The Archean volcanic rocks of the Timmins area have been subdivided into komatiitic, tholeiitic and calcalkaline suites based on Zr, Ti0 2 and Ni. The three elements were used because of their r e lative immobility during subsequent metamorphic events. Geochemical observations in the Timmins area indicates that the composition of the Goose Lake and Donut Lake Formations are a series of peridotitic, pyroxenitic and basaltic komatiites. The Lower Schumacher Formation is a sequence of basaltic komatiites while the upper part of the Lower Schumacher Formation is an intercalated sequence of basaltic komatiites and low Ti0 2 tholeiites. The variolitic flows are felsic tholeiites in composition and geochemical evidenc e sugg ests that they developed as a n immiscible splitting of a tholeiitic magma. The Upper Schumacher Formation is a sequence of tholeiitic rocks dis p laying a mild iron enrichment. The Krist and Boomerang Formations are the felsic calc-alkaline rocks of the study area which are characteristically pyroclastic. The Redstone Fo rmation is dominantly a calc-alkali ne sequence of volcani c rocks whose minor mafic end me mbers exposed in 1t.he study hav e basaltic komatiitic compositions. Geochemical evidence sugges ts that the Keewatin-type se dimentary rocks have a composition similar to a quartz diorite or a granodiorite. Fi e l d obs ervations and petrographic evidence suggests that they were derived fr om a distal source and now repr esent i n part a turbidite sequence. The Timiskaming-type sedimentary rocks approach the c omp osi t ion of the felsic calc-alkaline rocks of the study area . The basal conglomerate in the study are a sugge s ts that th e uni t was derived fr om a proximal source. Petrographic and ge ochemical evidence suggests that the peridotitic and pyroxenitic komatiites originated as a 35-55% partial melt within the mantle, in excess of 100 Km. depth. The melt ros e as a diapir with the subsequent effusion of the ultramafic lavas, The basaltic komatiites and tholeiitic rocks originated in the mantle from lesser degrees of partial melting and fractionated in low pressure chambers. Geochemical evidence suggests a "genetic link" between the basaltic komatiites and tholeiites, The calc-alkaline rocks developed as a result of the increa.se In PO in the magma chamber. The felsic calcalkaline rocks are a late stage effusion possibly the last major volcanic eruptions in the area.

Petrography, Petrochemistry and petrogenesis of Huronian volcanic rocks of the Elliot Lake region, Ontario

In the Elliot lake region of northern Ontario, Yolcanlc lava piles represent the lowermost units of the Huronian SUpergroup. These rocks general1y trend east-west and belong to the Elliot lake Group. They are s1tuated on the north and south limbs or the QuIrke lake Syncline. The volcanIc rocks of this study contain a secondary minerai assemblage consisting of actinolite, biotite, chlorIte, eptdote/cllnozoislte tttanomagnettte and calcite characteristic of greenschist metamorphism. Compilation of data suggests that metamorphism of the volcanic rocks proceeded between 325- and 425-C and between 2.4 and 4.7 kb. Geochemtcally these lavas represent tholeiitic and calc-alkaline assemblages. The tholeiites are character1sttcally enriched tn Fe and Tt and consist mainly of basalts, basaltic andesites and andesites. These rocks are believed to have formed by the partIal melting of a peridottte source at low P-T. In contrast, the calc-alkaline rocks are depleted in Fe and TI, but show a signIficant enrichment In 51 and Zr; andesIte Is the major rock type for thIs assemblage. I·t Is postUlated that the calc-alkalIne sU1te of rocks was the result of eIther the partIal meltIng of abasaltic·magma at shallow depth, or the melttng of s1al1c crustal materIal due to the added we1ght of tholeiitIc material on an unstable crust and to downwarplng processes Inttlated by convection cells.

Geological collections : dynamical geology and petrography

UANL

Petrography, Geochemistry and Diagenesis of Coral Deposits of Kavaratti and Minicoy Islands, Lakshadweep, India

In the present thesis the petrographic, geochemical and digenetic variability of the sediments in the islands of Kavaratti and Minicoy has been investigated .The beach profile studies show that in the Kavaratti lagoon beach, the slope is steeper in the southern and south central part than in the northern end’s marginal deposition is taking place in the northern end of the Kavaratti island, whereas a marginal erosion is observed at the southern end. In Minicoy the slope of the lagoon beach is gentle in the south and is slightly steeper at the northern part of the beach. The southern and northern beach sections show a marginal deposition. Based on the mineralogical and geochemical studies it is concluded that the main digenetic changes observed is the transformation of aragonite to LMC.The transformation takes place mainly in the vadose zone and is caused by the abundance of fresh water infiltration.

Petrography, magnetic susceptibility and geochemistry of the Rio Branco Granite, Carajás Province, southeast of Pará, Brazil

Petrografia, suscetibilidade magnética e geoquímica do Granito Rio Branco, Província Carajás, sudeste do Pará, Brazil. O Granito Rio Branco é um stock paleoproterozoico intrusivo no biotita-monzogranito arqueano Cruzadão. Ocorre a oeste da cidade de Canaã dos Carajás, nas proximidades da mina de cobre do Sossego na Província Carajás. É constituído por sienogranitos não deformados e isotrópicos, hololeucocráticos, em geral de granulação média. A mineralogia é formada por feldspato alcalino pertítico, quartzo e plagioclásio. A biotita, intensamente cloritizada, é a principal fase máfica, acompanhada por flluorita, allanita, zircão, pirita e calcopirita como minerais acessórios. Albitização e, com menor intensidade greisenização, afetaram o granito, sendo a mineralogia secundária albita, fluorita, topázio, clorita, muscovita, siderofilita e óxidos e/ou hidróxidos de ferro. O Granito Rio Branco apresenta valores sistematicamente baixos de suscetibilidade magnética (SM) variando de 1,3 x 10^-5 a 6,96 x 10^-4 (SI). Geoquimicamente, é metaluminoso a peraluminoso, possui altas razões FeOt/(FeOt + MgO) e mostra afinidades com granitos ferrosos, tipo-A do subtipo A2. Os padrões dos ETR revelam um ligeiro enriquecimento de ETR leves em relação ao ETR pesados e anomalia negativa acentuada de Eu (Eu/Eu* = 0,08 - 0,13), resultando feição em "gaivota", característica de granitos evoluídos. O conjunto de dados obtidos demonstra o caráter evoluído do Granito Rio Branco e sua derivação a partir de líquidos reduzidos e enriquecidos em voláteis, causadores das transformações hidrotermais tardias. O estudo comparativo deste corpo com aqueles das suítes anorogênicas da Província Carajás sugere que o Granito Rio Branco possui maior afinidade com os granitos das suítes Velho Guilherme e, em menor grau, Serra dos Carajás. Por outro lado, é claramente distinto da Suíte Jamon. Embora apresente características similares às dos granitos especializados em estanho, não há mineralizações desta natureza associadas ao corpo.

Petrography of gypsum-bearing facies of the Codó Formation (Late Aptian), Northern Brazil

Neste trabalho, é apresentado um estudo original e detalhado enfocando os aspectos petrográficos dos evaporitos de depósitos aptianos superiores expostos no sul e leste da Bacia de São Luís-Grajaú. O objetivo é o estabelecimento de critérios que permitam distinguir entre evaporitos primários e secundários, além da reconstrução de sua evolução pós-deposicional. Sete fases de evaporitos foram reconhecidas: 1. gipsita em chevron; 2. gipsita ou anidrita nodular a lenticular; 3. gipsita fibrosa a acicular; 4. gipsita em mosaico; 5. gipsita brechada a gipsarenito; 6. anidrita ou gipsita pseudo-nodular; e 7. gipsita em rosetas. As três primeiras fases apresentam características petrográficas condizentes com origem primária. Agipsita fibrosa a acicular e a gipsita em mosaico foramformadas por substituições de gipsita primária, com origem provável nos estágios iniciais da diagenêse, portanto ainda sob influência do ambiente deposicional. Estas morfologias de gipsita estão relacionadas com a fácies de evaporito laminado, tendo sido formadas por substituição, porém sem afetar a estruturação primária. A gipsita ou anidrita pseudo-nodular originou-se pela mobilização de soluções sulfatadas durante ou após soterramento, provavelmente associada à halocinese. A gipsita em rosetas, que intercepta todas as outras variedades de gipsita, representa o ultimo estágio de formação de evaporitos na área de estudo, tendo resultado de soluções intraestratais ou de águas superficiais durante intemperismo.

Petrography and sedimentology of aeolian sands: a tool for diagnose the sedimentary deficit in La Graciosa island (Natural Park of Archipielago Chinijo, Canary Islands, Spain).

[EN] Petrography and sedimentology of aeolian sands: a tool for diagnose the sedimentary deficit in La Graciosa island (Natural Park of Archipielago Chinijo, Canary Islands, Spain).

Comparison of magnetic properties and petrography between dykes and lava flows from La Cienega, New Mexico and Thunder Bay area, Canada

Data on the evolution of geomagnetic paleointensity are crucial for understanding the geodynamo and Earth’s thermal history. Although basaltic flows are preferred for paleointensity experiments, quickly cooled mafic dykes have also been used. However, the paleointensity values obtained from the dykes are systematically lower than those from lava flows. This bias may originate from the difference in cooling histories and resultant magnetic mineralogies of extrusive and intrusive rocks. To explore this hypothesis, the magnetic mineralogy of two feeder dyke-lave flow systems, from Thunder Bay (Canada) and La Cienega (New-Mexico), has been studied using magnetic and microscopy methods. Within each system, the flow and dyke show different stages of deuteric oxidation of titanomagnetite, but the oxidation stages also differ between the two systems. It is concluded that the tested hypothesis is viable, but the relationships between the magnetic and mineralogical properties of flows and dykes are complex and need a further investigation.

Morphological ripening of fluid inclusions and coupled zone-refining in quartz crystals revealed by cathodoluminescence imaging: Implications for CL-petrography, fluid inclusion analysis and trace-element geothermometry

Cathodoluminescence (CL) studies have previously shown that some secondary fluid inclusions in luminescent quartz are surrounded by dark, non-luminescent patches, resulting from fracture-sealing by late, trace-element-poor quartz. This finding has led to the tacit generalization that all dark CL patches indicate influx of low temperature, late-stage fluids. In this study we have examined natural and synthetic hydrothermal quartz crystals using CL imaging supplemented by in-situ elemental analysis. The results lead us to propose that all natural, liquid-water-bearing inclusions in quartz, whether trapped on former crystal growth surfaces (i.e., of primary origin) or in healed fractures (i.e., of pseudosecondary or secondary origin), are surrounded by three-dimensional, non-luminescent patches. Cross-cutting relations show that the patches form after entrapment of the fluid inclusions and therefore they are not diagnostic of the timing of fluid entrapment. Instead, the dark patches reveal the mechanism by which fluid inclusions spontaneously approach morphological equilibrium and purify their host quartz over geological time. Fluid inclusions that contain solvent water perpetually dissolve and reprecipitate their walls, gradually adopting low-energy euhedral and equant shapes. Defects in the host quartz constitute solubility gradients that drive physical migration of the inclusions over distances of tens of μm (commonly) up to several mm (rarely). Inclusions thus sequester from their walls any trace elements (e.g., Li, Al, Na, Ti) present in excess of equilibrium concentrations, thereby chemically purifying their host crystals in a process analogous to industrial zone refining. Non-luminescent patches of quartz are left in their wake. Fluid inclusions that contain no liquid water as solvent (e.g., inclusions of low-density H2O vapor or other non-aqueous volatiles) do not undergo this process and therefore do not migrate, do not modify their shapes with time, and are not associated with dark-CL zone-refined patches. This new understanding has implications for the interpretation of solids within fluid inclusions (e.g., Ti- and Al-minerals) and for the elemental analysis of hydrothermal and metamorphic quartz and its fluid inclusions by microbeam methods such as LA-ICPMS and SIMS. As Ti is a common trace element in quartz, its sequestration by fluid inclusions and its depletion in zone-refined patches impacts on applications of the Ti-in-quartz geothermometer.

Petrography and geochemistry of organic matter at DSDP Holes 80-549 and 80-550B

Three lower Barremian to middle/upper Cenomanian samples from DSDP Hole 549 and three lower Cenomanian to lower Maestrichtian samples from DSDP Hole 550B were investigated by organic geochemical and organic petrographic methods. The samples came from wells drilled in the area of the Goban Spur in the northeastern Atlantic; they represent gray to greenish gray carbonaceous mud or siltstones from the deeper parts of the Cretaceous sequences penetrated and light-colored chalks from the shallower ones. The total amount of organic carbon is below 1% in all samples; it is especially low in the Cenomanian to Maestrichtian chalks. Terrigenous organic matter predominates; only the Barremian sample shows a moderate number of marine phytoclasts. As indicated by several parameters, the maturity of the organic matter is low, corresponding to about 0.4% vitrinite reflectance.