935 resultados para personal area networks (PANs)
Resumo:
To interconnect a wireless sensor network (WSN) to the Internet, we propose to use TCP/IP as the standard protocol for all network entities. We present a cross layer designed communication architecture, which contains a MAC protocol, IP, a new protocol called Hop-to-Hop Reliability (H2HR) protocol, and the TCP Support for Sensor Nodes (TSS) protocol. The MAC protocol implements the MAC layer of beacon-less personal area networks (PANs) as defined in IEEE 802.15.4. H2HR implements hop-to-hop reliability mechanisms. Two acknowledgment mechanisms, explicit and implicit ACK are supported. TSS optimizes using TCP in WSNs by implementing local retransmission of TCP data packets, local TCP ACK regeneration, aggressive TCP ACK recovery, congestion and flow control algorithms. We show that H2HR increases the performance of UDP, TCP, and RMST in WSNs significantly. The throughput is increased and the packet loss ratio is decreased. As a result, WSNs can be operated and managed using TCP/IP.
Resumo:
We consider reliable communications in Body Area Networks (BAN), where a set of nodes placed on human body are connected using wireless links. In order to keep the Specific Absorption Rate (SAR) as low as possible for health safety reasons, these networks operate in low transmit power regime, which however, is known to be error prone. It has been observed that the fluctuations of the Received Signal Strength (RSS) at the nodes of a BAN on a moving person show certain regularities and that the magnitude of these fluctuations are significant (5 - 20 dB). In this paper, we present BANMAC, a MAC protocol that monitors and predicts the channel fluctuations and schedules transmissions opportunistically when the RSS is likely to be higher. The MAC protocol is capable of providing differentiated service and resolves co-channel interference in the event of multiple co-located BANs in a vicinity. We report the design and implementation details of BANMAC integrated with the IEEE 802.15.4 protocol stack. We present experimental data which show that the packet loss rate (PLR) of BANMAC is significantly lower as compared to that of the IEEE 802.15.4 MAC. For comparable PLR, the power consumption of BANMAC is also significantly lower than that of the IEEE 802.15.4. For co-located networks, the convergence time to find a conflict-free channel allocation was approximately 1 s for the centralized coordination mechanism and was approximately 4 s for the distributed coordination mechanism.
Resumo:
Significant research efforts are being devoted to Body Area Networks (BAN) due to their potential for revolutionizing healthcare practices. Energy-efficiency and communication reliability are critically important for these networks. In an experimental study with three different mote platforms, we show that changes in human body shadowing as well as those in the relative distance and orientation of nodes caused by the common human body movements can result in significant fluctuations in the received signal strength within a BAN. Furthermore, regular movements, such as walking, typically manifest in approximately periodic variations in signal strength. We present an algorithm that predicts the signal strength peaks and evaluate it on real-world data. We present the design of an opportunistic MAC protocol, named BANMAC, that takes advantage of the periodic fluctuations of the signal strength to achieve high reliability even with low transmission power.
The utilization bound of non-preemptive rate-monotonic scheduling in controller area networks is 25%
Resumo:
Consider a distributed computer system comprising many computer nodes, each interconnected with a controller area network (CAN) bus. We prove that if priorities to message streams are assigned using rate-monotonic (RM) and if the requested capacity of the CAN bus does not exceed 25% then all deadlines are met.
Resumo:
The IEEE 802.15.4 protocol proposes a flexible communication solution for Low-Rate Wireless Personal Area Networks including sensor networks. It presents the advantage to fit different requirements of potential applications by adequately setting its parameters. When enabling its beacon mode, the protocol makes possible real-time guarantees by using its Guaranteed Time Slot (GTS) mechanism. This paper analyzes the performance of the GTS allocation mechanism in IEEE 802.15.4. The analysis gives a full understanding of the behavior of the GTS mechanism with regards to delay and throughput metrics. First, we propose two accurate models of service curves for a GTS allocation as a function of the IEEE 802.15.4 parameters. We then evaluate the delay bounds guaranteed by an allocation of a GTS using Network Calculus formalism. Finally, based on the analytic results, we analyze the impact of the IEEE 802.15.4 parameters on the throughput and delay bound guaranteed by a GTS allocation. The results of this work pave the way for an efficient dimensioning of an IEEE 802.15.4 cluster.
Resumo:
The IEEE 802.15.4 protocol proposes a flexible communication solution for Low-Rate Wireless Personal Area Networks (LR-WPAN) including wireless sensor networks (WSNs). It presents the advantage to fit different requirements of potential applications by adequately setting its parameters. When in beaconenabled mode, the protocol can provide timeliness guarantees by using its Guaranteed Time Slot (GTS) mechanism. However, power-efficiency and timeliness guarantees are often two antagonistic requirements in wireless sensor networks. The purpose of this paper is to analyze and propose a methodology for setting the relevant parameters of IEEE 802.15.4-compliant WSNs that takes into account a proper trade-off between power-efficiency and delay bound guarantees. First, we propose two accurate models of service curves for a GTS allocation as a function of the IEEE 802.15.4 parameters, using Network Calculus formalism. We then evaluate the delay bound guaranteed by a GTS allocation and express it as a function of the duty cycle. Based on the relation between the delay requirement and the duty cycle, we propose a power-efficient superframe selection method that simultaneously reduces power consumption and enables meeting the delay requirements of real-time flows allocating GTSs. The results of this work may pave the way for a powerefficient management of the GTS mechanism in an IEEE 802.15.4 cluster.
Resumo:
Wireless Body Area Networks (WBANs) have emerged as a promising technology for medical and non-medical applications. WBANs consist of a number of miniaturized, portable, and autonomous sensor nodes that are used for long-term health monitoring of patients. These sensor nodes continuously collect information of patients, which are used for ubiquitous health monitoring. In addition, WBANs may be used for managing catastrophic events and increasing the effectiveness and performance of rescue forces. The huge amount of data collected by WBAN nodes demands scalable, on-demand, powerful, and secure storage and processing infrastructure. Cloud computing is expected to play a significant role in achieving the aforementioned objectives. The cloud computing environment links different devices ranging from miniaturized sensor nodes to high-performance supercomputers for delivering people-centric and context-centric services to the individuals and industries. The possible integration of WBANs with cloud computing (WBAN-cloud) will introduce viable and hybrid platform that must be able to process the huge amount of data collected from multiple WBANs. This WBAN-cloud will enable users (including physicians and nurses) to globally access the processing and storage infrastructure at competitive costs. Because WBANs forward useful and life-critical information to the cloud – which may operate in distributed and hostile environments, novel security mechanisms are required to prevent malicious interactions to the storage infrastructure. Both the cloud providers and the users must take strong security measures to protect the storage infrastructure.
Resumo:
L’estudi examina les relacions entre (1) les xarxes socials personals de la població immigrant resident a Barcelona i (2) les seves identitats culturals múltiples. L’objectiu principal de l’estudi és entendre com el contingut i l’estructura de les relacions socials dels immigrants facilita o dificulta (1) tenir un sentiment de pertinença a les noves cultures d’acollida, la catalana i la espanyola, i (2) la integració d’aquestes noves identitats socioculturals amb la seva identitat d’origen en una nova identitat bicultural cohesiva. El nostre plantejament inicial era que els immigrants amb xarxes socials més diverses des del punt de vista de la seva composició cultural tindrien més recursos socials i experiències cognitives més diverses , factors que afavoreixen les identificacions múltiples i la participació cívica. Els resultats de l’estudi mostren que el grau d’identificació dels participants amb la seva cultura ètnica o d’origen és força alt i, en certa mesura, més alt en comparació amb les cultures d’acollida ( catalana, cívica i espanyola). Tanmateix, el vincle dels participants amb les cultures d’acollida (p. ex., la cultura catalana) és prou rellevant per a indicar una orientació bicultural (catalana i ètnica). Les anàlisis de correlacions revelen que sentir-se català no impedeix sentir-se part de la comunitat etnocultural d’origen. A més, existeix una interrelació entre l'orientació cultural catalana i la identificació amb les comunitats cíviques locals. De la mateixa manera, tenir competències en llengua catalana no va en detriment de les competències en llengua castellana. Les anàlisis també mostren que factors com l’orientació cultural catalana, l’ús del català i la identificació amb la cultura catalana tenen una correlació positiva amb el grau de chohesio de la indentitat bicultural, afavoreixen el benestar psicològic i disminueixen l’estrès aculturatiu. L’anàlisi de les xarxes socials mostra que la identificació amb la cultura catalana, l’orientació cultural catalana i la integració de la identitat són factors clau per tenir xarxes socials més diverses des del punt de vista ètnic i lingüístic, amb menys membres del col•lectiu d’origen, i amb subgrups o “cliques” culturalment més heterogenis. La identificació espanyola també prediu, en mesura més reduïda, la diversitat de les xarxes. Els nostres resultats contribueixen a la recerca actual i les teories sobre interculturalitat i identitat cultural.
Resumo:
The objective of the thesis was to evaluate business potential of wireless local area networks (WLAN, Wireless LAN). At first, the scope of business potential evaluation of technology was introduced. Next, a general framework of business potential evaluation of technology based on literature was presented. In addition, convergence of cellular networks and data networks was studied in order to get an insight of current situation of mobile telecommunications industry. Finally, wireless local area networks business potential was evaluated. A wireless local area network is a data communication system, which combines data connectivity with mobility and is implemented in unlicensed frequency bands, allowing new business opportunities to emerge. The main markets of WLAN are corporate networks, public area networks and access networks. At the moment the penetration of WLAN terminals is low which derives to low demand of wireless LAN services. In addition, unlicensed spectrum forces the teleoperators to set the service price relatively low. The business potential is in integrating wireless LANs to cellular networks and in offering value added services to end users. The future of wireless LAN is to be complementary network to cellular networks. In this vision cellular networks provide voice and low data services and broadband wireless networks enable multimedia services.
Resumo:
Langattomat lähiverkot ovat yleistyneet ja monin paikoin niillä pyritään täysin korvaamaan perinteiset kaapeloidut verkot. Samalla verkoissa välitettävät palvelut monipuolistuvat. Etenkin interaktiivisten sisältöjen ja viiveriippuvaisten palvelujen välittämisessä korostuvat verkolle asettavat vaatimukset suorituskyvystä ja palveluntasosta. Radiotaajuuksilla tapahtuva tiedonsiirto on ongelmallista siirtomedian jaetun luonteen vuoksi. Käytettäessä ympärisäteileviä antenneja jokainen kantomatkan päässä oleva asema kuulee lähetyksen, vaikkei se olisi sille suunnattu. Tämä luo turvallisuusongelman, mutta lisäksi heikentää tehokkuutta, koska nykyisellä antenniteknologialla vain yksi asema kerrallaan voi lähettää häiriöttä kantoalueellaan. Täsmälähetykset yhden lähteen ja useiden kohteiden välillä luovat erillisiä siirtolinkkejä. Olisi luontevampaa luoda yksi lähetysvirta, johon useat vastaanottajat voivat kytkeytyä. Kaistan säästön vastapainona on tarve luoda ja ylläpitää näitä yhteyksiä. Käyttäjien liikkuvuuden ja siirtotien vaihtelevien ominaisuuksien vuoksi langattoman verkon rakenne ja rajat ovat epäselviä. Näihin haasteisiin on vastattava sekä protokolla- että sovellustasolla. Tässä tutkielmassa käydään ensin läpi IEEE 802.11 -standardin mukaisen langattoman verkon perusteet ja sen ominaisuuksiin liittyvät tyypilliset ongelmakohdat. Yleis- ja ryhmälähetyksiä tarkastellaan ensin perinteisessä IEEE 802.3 standardin mukaisessa langallisessa lähiverkossa ja selvitetään, miten vastaavat ominaisuudet toteutuvat IEEE 802.11 standardien mukaisissa langattomissa verkoissa. Käyttötapaustutkimuksissa keskitytään rajatussa ympäristössä tapahtuviin ryhmälähetyksiin. Erityisesti tutkitaan langattomien ryhmälähetysten käyttökelpoisuutta sekä langattoman ympäristön asettamia erityisvaatimuksia.
Resumo:
Dense deployments of wireless local area networks (WLANs) are becoming a norm in many cities around the world. However, increased interference and traffic demands can severely limit the aggregate throughput achievable unless an effective channel assignment scheme is used. In this work, a simple and effective distributed channel assignment (DCA) scheme is proposed. It is shown that in order to maximise throughput, each access point (AP) simply chooses the channel with the minimum number of active neighbour nodes (i.e. nodes associated with neighbouring APs that have packets to send). However, application of such a scheme to practice depends critically on its ability to estimate the number of neighbour nodes in each channel, for which no practical estimator has been proposed before. In view of this, an extended Kalman filter (EKF) estimator and an estimate of the number of nodes by AP are proposed. These not only provide fast and accurate estimates but can also exploit channel switching information of neighbouring APs. Extensive packet level simulation results show that the proposed minimum neighbour and EKF estimator (MINEK) scheme is highly scalable and can provide significant throughput improvement over other channel assignment schemes.
Resumo:
Body area networks (BANs) are emerging as enabling technology for many human-centered application domains such as health-care, sport, fitness, wellness, ergonomics, emergency, safety, security, and sociality. A BAN, which basically consists of wireless wearable sensor nodes usually coordinated by a static or mobile device, is mainly exploited to monitor single assisted livings. Data generated by a BAN can be processed in real-time by the BAN coordinator and/or transmitted to a server-side for online/offline processing and long-term storing. A network of BANs worn by a community of people produces large amount of contextual data that require a scalable and efficient approach for elaboration and storage. Cloud computing can provide a flexible storage and processing infrastructure to perform both online and offline analysis of body sensor data streams. In this paper, we motivate the introduction of Cloud-assisted BANs along with the main challenges that need to be addressed for their development and management. The current state-of-the-art is overviewed and framed according to the main requirements for effective Cloud-assisted BAN architectures. Finally, relevant open research issues in terms of efficiency, scalability, security, interoperability, prototyping, dynamic deployment and management, are discussed.
Resumo:
The progress in wearable and implanted health monitoring technologies has strong potential to alter the future of healthcare services by enabling ubiquitous monitoring of patients. A typical health monitoring system consists of a network of wearable or implanted sensors that constantly monitor physiological parameters. Collected data are relayed using existing wireless communication protocols to the base station for additional processing. This article provides researchers with information to compare the existing low-power communication technologies that can potentially support the rapid development and deployment of WBAN systems, and mainly focuses on remote monitoring of elderly or chronically ill patients in residential environments.