采用基本块规约的控制流检测性能优化方法

控制流检测是抵御单粒子事件的有效手段之一.目前的主流方法是采用嵌入式签名技术, 但是该技术引入的检测指令过多, 导致程序效率低下. 本文使用基本块规约的技术, 在原基本块的基础上, 选择合适的约束量重新划分基本块, 减少引入的检测指令. 与8个常见算法的性能比较表明, 该方法在软错误检测覆盖率基本不变的前提下,能有效提高目标程序效率.

Worry activation impairs intelligence test performace only under ego depletion

Detrimental effects of anxiety on cognitive performance have been explained by the activation of worry, detracting attention away from the task at hand. However, recent research has shown that anxiety is only related to performance when self-control capacity is low (i.e., ego depletion). The aim of the present work has been to extend these findings by showing that activation of worry will interfere with cognitive performance more strongly when self-control capacity is momentarily depleted compared to intact. After manipulations of self-control capacity and worry activation, 70 undergraduates completed a standardized intelligence test. As expected, activation of worry was associated with lower performance when self-control capacity was depleted, but had no effect when self-control capacity was intact. The findings implicate that worry may play a causal role in the anxiety–performance relationship, but only when its regulation by self-control is momentarily hindered.

Ligação entre a Liderança e a Performace através da Gestão Estratégica: Uma análise ao nível das Unidades de Saúde "Linking Leadership to Performance Through Strategic Management".

Esta dissertação pretende descobrir de que forma a Liderança pode influenciar o desenvolvimento da Estratégia de uma organização ou empresa, através de uma análise do seu desempenho. Abordando as temáticas então enunciadas, o objectivo deste estudo reside na avaliação da importância e contributo da Liderança ao nível da Gestão Estratégica implementada ao nível de uma unidade de saúde. A estrutura deste estudo envolve um enquadramento teórico da Liderança e da Estratégia, culminando na relação entre os dois conceitos. Seguidamente, evidencia uma abordagem à metodologia aplicada, culminando num estudo empírico às unidades de saúde analisadas. Pretende-se com isto que os conceitos estudados sejam adaptados a dois centros hospitalares pertencentes ao Distrito de Setúbal (o Centro Hospitalar de Setúbal - E.P.E., em conjunto com o Centro Hospitalar do Barreiro e Montijo - E.P.E.). Assim sendo, comparando diversos indicadores de actividades, dos recursos humanos e resultados financeiros de cada unidade hospitalar, com os resultados de entrevistas que avaliam na prática os conceitos da liderança e estratégia, as conclusões que se recolhem determinam que qualquer uma das temáticas abordadas é certamente uma parte essencial da gestão e que desta forma se mostram inevitavelmente ligadas e intrínsecas enquanto dotadas de uma correlação e dependência irrefutáveis. O resultado deste estudo, apresenta então um grande desafio para gestor, que reside em saber em que situações seguir ou alterar as suas estratégias permitindo assim gerar mais flexibilidade na conduta da sua actividade, em conjunto com a forma ou estilo mais correcto de liderar os seus seguidores, de forma a tornar os seus recursos humanos numa unidade sólida, harmonizada e orientado para a obtenção de um objectivo comum.

System identification and control of an aerobot drive system

Fast thrust changes are important for authoritive control of VTOL micro air vehicles. Fixed-pitch rotors that alter thrust by varying rotor speed require high-bandwidth control systems to provide adequate performace. We develop a feedback compensator for a brushless hobby motor driving a custom rotor suitable for UAVs. The system plant is identified using step excitation experiments. The aerodynamic operating conditions of these rotors are unusual and so experiments are performed to characterise expected load disturbances. The plant and load models lead to a proportional controller design capable of significantly decreasing rise-time and propagation of disturbances, subject to bus voltage constraints.

Comparing methods for modelling spreading cell fronts

Spreading cell fronts play an essential role in many physiological processes. Classically, models of this process are based on the Fisher-Kolmogorov equation; however, such continuum representations are not always suitable as they do not explicitly represent behaviour at the level of individual cells. Additionally, many models examine only the large time asymptotic behaviour, where a travelling wave front with a constant speed has been established. Many experiments, such as a scratch assay, never display this asymptotic behaviour, and in these cases the transient behaviour must be taken into account. We examine the transient and asymptotic behaviour of moving cell fronts using techniques that go beyond the continuum approximation via a volume-excluding birth-migration process on a regular one-dimensional lattice. We approximate the averaged discrete results using three methods: (i) mean-field, (ii) pair-wise, and (iii) one-hole approximations. We discuss the performace of these methods, in comparison to the averaged discrete results, for a range of parameter space, examining both the transient and asymptotic behaviours. The one-hole approximation, based on techniques from statistical physics, is not capable of predicting transient behaviour but provides excellent agreement with the asymptotic behaviour of the averaged discrete results, provided that cells are proliferating fast enough relative to their rate of migration. The mean-field and pair-wise approximations give indistinguishable asymptotic results, which agree with the averaged discrete results when cells are migrating much more rapidly than they are proliferating. The pair-wise approximation performs better in the transient region than does the mean-field, despite having the same asymptotic behaviour. Our results show that each approximation only works in specific situations, thus we must be careful to use a suitable approximation for a given system, otherwise inaccurate predictions could be made.

Achieving superior innovation-based performance outcomes in SMEs through innovation resource–capability complementarity

Firms are increasingly identifying new avenues to enhance their market position. One such effort involves the firms' ability to continuously learn. Learning has the capacity to enable firms to develop and implement more efficient and effective innovation-focused strategies, resulting in the ability to develop and deliver more products in a timelier manner. This study tests the relationship between innovation resource–capability complementarity and innovation-based performance. This study further elaborates that while innovation resource–capability complementarity drives innovation-based performance; their relationship will be enhanced via the firms' possession of superior learning capability. The findings show a significant effect of innovation resource–capability complementarity on innovation-based performance. The results also show that firms that possess superior learning capability are willing to question their operational processes and routines and make adjustments following the feedback obtained from customers and channels; thereby enhancing their abilities to develop more new products and increase their speed in delivering products to the customers.

We need to talk (Performance Space)

'We need to talk (Performace Space)' is a 3 channel audio work with round table and custom cushions, examining the discursive framework of LEVEL as a feminist art collective. It was included in the exhibition 'Sexes', curated by Bec Dean, Jeff Khan and Deborah Kelly, at Performance Space. The audio works feature recontextualised excerpts from a series of dinner party conversations, which focused on the role of women and feminism in the 21st century. Placed in a specially constructed ‘lazy susan’, this audio installation speaks of the experience of sharing information, ideas and experiences ‘around the table’. The fabric patterns on the floor cushions have been designed from banners created in collective workshops with women in Brisbane and Melbourne, Australia, as a way of translating personal statements and political ideas into the everyday.

Ruumiinkuvia! : Suomalainen performanssi- ja kehotaide 1980- ja1990-luvulla psykoanalyysin valossa

My PhD-thesis Body Images! Psychoanalytical Analysis of Finnish Performance and Body Art in the 1980s and 1990s considers Finnish performance and body art performed mainly by visual artists. In Part I, I chart the historical construction of performance art and its extension since the beginning of the 21st century. There are several wievs of the historical background of performance art. I introduce three different genealogies of performance art. One is Rose-Lee Goldberg s view. She connects performance art with the European avant-garde already at the beginning of the 20th century from futurists and dadaists to Russian avant-garde and the Bauhaus. I prefer to present performance art as contemporary art, which began to take shape in connection with visual arts in the 1950s and 1960s. The focus on the body is apparent in nearly all performance art. Nevertheless, throug the concept of body art I want to empasize the artist s body as the place of art. Body art (as part of performance art) functions as thematic and interpretive concept, which allows me to focus on performances where the questions of body image, narcissism, desire, language and pleasure are incorporated in particular intensive ways. In Part II, I explore the arrival of performance art in Finnish visual arts in the 1980s. I study the new generation s relation to earlier Finnish happenings (1960s) and performative actions in 1970 s. I briefly introduce performance groups of the 1980s art scene and consider their reception in media. The main focus is on the group Jack Helen Brut, in which I see many similarities to the so- called Theatre of Images. The goal of this part II is to provide historical context for the performance analysis that follows. In Part III, I develop the concept of body image which is my main theoretical term. The concept of body image is used according to Lacanian psychoanalytical theory, especially his considerations of mirror stages. My first mapping of body image, which I call imaginary body image, is based on Lacan s famous mirror stage article (1949). According to my reading, body image is narcistic and aggressive. The important concepts here are ego, imaginary, méconnaisance and alienation. In 1953 Lacan began to develop different version on mirror stage, in which he emphasized the primacy of symbolic dimension. It is not image, but language which constructs the foundations of body image. Central concepts in this chater are Other as language, ego-ideal, demand and desire. In the last chapter I connect the third version of the mirror stage to concepts of gaze, phantasy, real, jouissance and object a. In previous chapters I had considered body image in relation to ego. Now I explore it in relation to subject. In my reading the body image is fragile phenomen, which oscillates between yearning for coherence and phantasies of fragmented images. Part IV of the thesis begins with an introduction to the central concepts and debates in performace studies over the last few decades. Important concepts are presence, performativity and theatricality. The main substance of my thesis, however, is the performance analysis, which focuses on works by three Finnish artists and one Finnish group. The first analysis concerns the performance (1992) of Kimmo Schroderus. I discuss the relationship between narcissism and body art and the changes in demands projected on body images of men in recent decades in a Euro-American context. I also explore this performance in relation to the myth of Narcissus, which I reinterpret through Narcissus s aggression against his own body. The group Homo S is the main subject of the next analysis. I discuss the relationship between feminist art and performance art, especially in the United States in the 1960s and 1970s. Homo S is different from this early performance art because of its anarchism, humor and rejection of all ideals. Homo S characterizes its performance Body Body (1983) as liberating vulgar feminism . Sociality and performance of erotic relations between women are central in Body Body. Pia Lindman s performances are the subjects of my third analysis. I study three of her performances: Olen muoto (1993), 17 and in love (1994) and Arranged views (1995). I interpret these performances as efforts to disperse the imaginary and symbolic structures of the body image. She constructs the peculiar object a and phantasy space of her own. In the last analysis I move from questions of image and gaze to a study of language, sound and jouissance. I discuss at a general level the performance of orality and helplesness (Hilflosigkeit) in body art. The central elements in Pentti Otto Koskinen s performances are the ear, listening and receptive gestures and postions. Perseveraatio (1998) can be understood representing as submission to the super-ego s power, which compels one to enjoy. I examine particularly closely the performance Maissi on hyvää ei missään nimessä maissia (1995), which I interpret as the return of a baby s body image to the liminal site of choice: language or jouissance?

Management Guidelines for New Warm-Season Grasses in Australia

After more than 30 years in which ‘Tifgreen’ and ‘Tifdwarf’ were the only greens-quality varieties available, the choice for golf courses and bowls clubs in northern Australia has been expanded to include six new Cynodon hybrids [Cynodon dactylon (L.) Pers x Cynodon transvaalensis Burtt-Davy]. Five of these – ‘Champion Dwarf’ (Texas), ‘MS-Supreme’ (Mississippi), FloraDwarf™ (Florida), ‘TifEagle’ (Georgia), MiniVerde™ (Arizona) - are from US breeding programs, while the sixth, ‘TL2’ (marketed as Novotek™) was selected in north Queensland. The finer, denser and lower growing habit of the “ultradwarf” cultivars allows very low mowing heights (e.g. 2.5 mm) to be imposed, resulting in denser and smoother putting and bowls surfaces. In addition to the Cynodon hybrids, four new greens quality seashore paspalum (Paspalum vaginatum O. Swartz) cultivars including ‘Sea Isle 2000’, Sea Isle Supreme™, Velvetene™ and Sea Dwarf™ (where tolerance of salty water is required) expands the range of choices for greens in difficult environments. The project was developed to determine (a) the appropriate choice of cultivar for different environments and budgets, and (b) best management practices for the new cultivars which differ from the Cynodon hybrid industry standards ‘Tifgreen’ and ‘Tifdwarf’. Management practices, particularly fertilising, mowing heights and frequency, and thatch control were investigated to determine optimum management inputs and provide high quality playing surfaces with the new grasses. To enable effective trialling of these new and old cultivars it was essential to have a number of regional sites participating in the study. Drought and financial hardship of many clubs presented an initial setback with numerous clubs wanting to be involved in the study but were unable to commit due to their financial position at the time. The study was fortunate to have seven regional sites from Queensland, New South Wales, Victoria and South Australia volunteer to be involved in the study which would add to the results being collected at the centralised test facility being constructed at DEEDI’s Redlands Research Station. The major research findings acquired from the eight trial sites included: • All of the new second generation “ultradwarf” couchgrasses tend to produce a large amount of thatch with MiniVerde™ being the greatest thatch producer, particularly compared to ‘Tifdwarf’ and ‘Tifgreen’. The maintenance of the new Cynodon hybrids will require a program of regular dethatching/grooming as well as regular light dustings of sand. Thatch prevention should begin 3 to 4 weeks after planting a new “ultradwarf” couchgrass green, with an emphasis on prevention rather than control. • The “ultradwarfs” produced faster green speeds than the current industry standards ‘Tifgreen’ and ‘Tifdwarf’. However, all Cynodon hybrids were considerably faster than the seashore paspalums (e.g. comparable to the speed diference of Bentgrass and couchgrass) under trial conditions. Green speed was fastest being cut at 3.5 mm and rolled (compared to 3.5 mm cut, no roll and 2.7 mm cut, no roll). • All trial sites reported the occurrence of disease in the Cynodon hybrids with the main incidence of disease occurring during the dormancy period (autumn and winter). The main disease issue reported was “patch diseases” which includes both Gaumannomyces and Rhizoctonia species. There was differences in the severity of the disease between cultivars, however, the severity of the disease was not consistent between cultivars and is largely attributed to an environment (location) effect. In terms of managing the occurrence of disease, the incidence of disease is less severe where there is a higher fertility rate (about 3 kgN/100m2/year) or a preventitatve fungicide program is adopted. • Cynodon hybrid and seashore paspalum cultivars maintained an acceptable to ideal surface being cut between 2.7 mm and 5.0 mm. “Ultradwarf” cultivars can tolerate mowing heights as low as 2.5 mm for short periods but places the plant under high levels of stress. Greens being maintained at a continually lower cutting height (e.g. 2.7 mm) of both species is achievable, but would need to be cut daily for best results. Seashore paspalums performed best when cut at a height of between 2.7 mm and 3.0 mm. If a lower cutting height is adopted, regular and repeated mowings are required to reduce scalping and produce a smooth surface. • At this point in time the optimum rate of nitrogen (N) for the Cynodon hybrids is 3 kg/100m2/year and while the seashore paspalums is 2 to 3 kg/100m2/year. • Dormancy occurred for all Cynodon and seashore paspalum culitvars from north in Brisbane (QLD) to south in Mornington Peninsula (VIC) and west to Novar Gardens (SA). Cynodon and Paspalum growth in both Victoria and South Australia was less favourable as a result of the cooler climates. • After combining the data collected from all eight sites, the results indicated that there can be variation (e.g. turfgrass quality, colour, disease resistance, performace) depending on the site and climatic conditions. Such evidence highlights the need to undertake genotype by environment (G x E) studies on new and old cultivars prior to conversion or establishment. • For a club looking to select either a Cynodon hybrid or seashore paspalum cultivar for use at their club they need to: - Review the research data. - Look at trial plots. - Inspect greens in play that have the new grasses. - Select 2 to 3 cultivars that are considered to be the better types. - Establish them in large (large enough to putt on) plots/nursery/practice putter. Ideally the area should be subjected to wear. - Maintain them exactly as they would be on the golf course/lawn bowls green. This is a critical aspect. Regular mowing, fertilising etc. is essential. - Assess them over at least 2 to 3 years. - Make a selection and establish it in a playing green so that it is subjected to typical wear.

Avaliação in vitro da incorporação de clorexidina nas propriedades físico-químicas de resinas macias

A incorporação do diacetato de clorexidina em resinas macias para reembasamento de próteses pode se tornar uma boa alternativa na terapia com antimicrobianos usados para candidíase oral, uma vez que é independente da cooperação do paciente. Este trabalho teve como objetivo analisar a hipótese que a incorporação de diacetato de clorexidina em resinas macias não alteraria as suas propriedades físico-químicas. Foram analisadas duas resinas macias, uma à base de polimetilmetacrilato (PMMA) e outra à base de polietilmetacrilato (PEMA), com a incorporação de 0,5%, 1,0% e 2,0% de diacetato de clorexidina, além do grupo controle sem diacetato de clorexidina. Os espécimes foram armazenadas em água destilada a 37 durante 2hrs, 48 hrs, 7, 14, 21 e 28 dias e analisados quanto a cristalinidade do polímero através da difração de Raios X, a dureza mensurada com durômetro na escala shore A, o grau de conversão dos monômeros pela Espectroscopia de Infravermelho Transformada de Fourier (FTIR), a lixiviação de monômeros residuais e a liberação da clorexidina por Cromatografia Líquida de Alta Performace (HPLC). Os resultados mostraram que quanto à cristalinidade dos polímeros nas resinas macias à base de PMMA e de PEMA não alteraram após a incorporação de clorexidina, o que está relacionado à dureza Shore A, que aumentou ao longo do tempo, mas sem alteração significativa para nenhuma das concentrações de diacetato de clorexidina testadas. Já quanto ao grau de conversão, após a incorporação de clorexidina, a resina macia à base de PMMA não apresentou diferença estatisticamente significativa (р>0,05), porém a resina macia à base de PEMA apresentou diminuição significativa do grau de conversão (p<0,05), o que refletiu no aumento significativo da lixiviação de monômeros residuais nas concentrações 0,5% e 1,0% de clorexidina (p<0,05), principalmente nas primeiras 48 horas nessa resina. A resina macia à base de PMMA não apresentou alterações do padrão de lixiviação desses monômeros (р>0,05) e para ambas as resinas a cinética de liberação de clorexidina foi relacionada à lixiviação de monômeros residuais, que para a resina macia à base de PEMA foi maior significativamente nas primeiras 48 horas (p<0,05) e para a resina macia à base de PMMA não teve alteração estatisticamente significativa (р>0,05) se mantendo até o último dia de análise. Desse modo, conclui-se que a incorporação do diacetato de clorexidina não afetou a cristalinidade dos polímeros, inalterando a dureza nas duas resinas, porém o grau de conversão sofreu diminuição após a incorporação de diacetato de clorexidina na resina macia à base de PEMA, o que levou ao aumento da lixiviação de monômeros residuais e curta liberação de clorexidina; enquanto que a resina macia à base de PMMA, devido a não alteração significativa do seu grau de conversão, ocorreu menor lixiviação de monômeros residuais e liberação prolongada de clorexidina.

Characterisation of gas and particle emissions from wildfires

Os incêndios florestais são uma importante fonte de emissão de compostos gasosos e de aerossóis. Em Portugal, onde a maioria dos incêndios ocorre no norte e centro do país, os incêndios destroem todos os anos milhares de hectares, com importantes perdas em termos económicos, de vidas humanas e qualidade ambiental. As emissões podem alterar consideravelmente a química da atmosfera, degradar a qualidade do ar e alterar o clima. Contudo, a informação sobre as caraterísticas das emissões dos incêndios florestais nos países do Mediterrâneo é limitada. Tanto a nível nacional como internacional, existe um interesse crescente na elaboração de inventários de emissões e de regulamentos sobre as emissões de carbono para a atmosfera. Do ponto de vista atmosférico da monitorização atmosférica, os incêndios são considerados um desafio, dada a sua variabilidade temporal e espacial, sendo de esperar um aumento da sua frequência, dimensão e severidade, e também porque as estimativas de emissões dependem das caraterísticas dos biocombustíveis e da fase de combustão. O objetivo deste estudo foi quantificar e caraterizar as emissões de gases e aerossóis de alguns dos mais representativos incêndios florestais que ocorreram no centro de Portugal nos verões de 2009 e de 2010. Efetuou-se a colheita de amostras de gases e de duas frações de partículas (PM2.5 e PM2.5-10) nas plumas de fumo em sacos Tedlar e em filtros de quartzo acoplados a um amostrador de elevado volume, respetivamente. Os hidrocarbonetos totais (THC) e óxidos de carbono (CO e CO2) nas amostras gasosas foram analisados em instrumentos automáticos de ionização de chama e detetores não dispersivos de infravermelhos, respetivamente. Para algumas amostras, foram também quantificados alguns compostos de carbonilo após reamostragem do gás dos sacos Tedlar em cartuchos de sílica gel revestidos com 2,4-dinitrofenilhidrazina (DNPH), seguida de análise por cromatografia líquida de alta resolução. Nas partículas, analisou-se o carbono orgânico e elementar (técnica termo-óptica), iões solúveis em água (cromatografia iónica) e elementos (espectrometria de massa com plasma acoplado por indução ou análise instrumental por ativação com neutrões). A especiação orgânica foi obtida por cromatografia gasosa acoplada a espectrometria de massa após extração com recurso a vários solventes e separação dos extratos orgânicos em diversas classes de diferentes polaridades através do fracionamento com sílica gel. Os fatores de emissão do CO e do CO2 situaram-se nas gamas 52-482 e 822-1690 g kg-1 (base seca), mostrando, respetivamente, correlação negativa e positiva com a eficiência de combustão. Os fatores de emissão dos THC apresentaram valores mais elevados durante a fase de combustão latente sem chama, oscilando entre 0.33 e 334 g kg-1 (base seca). O composto orgânico volátil oxigenado mais abundante foi o acetaldeído com fatores de emissão que variaram desde 1.0 até 3.2 g kg-1 (base seca), seguido pelo formaldeído e o propionaldeído. Observou-se que as emissões destes compostos são promovidas durante a fase de combustão latente sem chama. Os fatores de emissão de PM2.5 e PM10 registaram valores entre 0.50-68 e 0.86-72 g kg-1 (base seca), respetivamente. A emissão de partículas finas e grosseiras é também promovida em condições de combustão lenta. As PM2.5 representaram cerca de 90% da massa de partículas PM10. A fração carbonosa das partículas amostradas em qualquer dos incêndios foi claramente dominada pelo carbono orgânico. Foi obtida uma ampla gama de rácios entre o carbono orgânico e o carbono elementar, dependendo das condições de combustão. Contudo, todos os rácios refletiram uma maior proporção de carbono orgânico em relação ao carbono elementar, típica das emissões de queima de biomassa. Os iões solúveis em água obtidos nas partículas da pluma de fumo contribuíram com valores até 3.9% da massa de partículas PM2.5 e 2.8% da massa de partículas de PM2.5-10. O potássio contribuiu com valores até 15 g mg-1 PM2.5 e 22 g mg-1 PM2.5-10, embora em massa absoluta estivesse maioritariamente presente nas partículas finas. Os rácios entre potássio e carbono elementar e entre potássio e carbono orgânico obtidos nas partículas da pluma de fumo enquadram-se na gama de valores relatados na literatura para emissões de queima de biomassa. Os elementos detetados nas amostras representaram, em média, valores até 1.2% e 12% da massa de PM2.5 e PM2.5-10, respetivamente. Partículas resultantes de uma combustão mais completa (valores elevados de CO2 e baixos de CO) foram caraterizadas por um elevado teor de constituintes inorgânicos e um menor conteúdo de matéria orgânica. Observou-se que a matéria orgânica particulada é composta principalmente por componentes fenólicos e produtos derivados, séries de compostos homólogos (alcanos, alcenos, ácidos alcanóicos e alcanóis), açúcares, biomarcadores esteróides e terpenóides, e hidrocarbonetos aromáticos policíclicos. O reteno, um biomarcador das emissões da queima de coníferas, foi o hidrocarboneto aromático dominante nas amostras das plumas de fumo amostradas durante a campanha que decorreu em 2009, devido ao predomínio de amostras colhidas em incêndios em florestas de pinheiros. O principal açúcar anidro, e sempre um dos compostos mais abundantes, foi o levoglucosano. O rácio levoglucosano/OC obtido nas partículas das plumas de fumo, em média, registaram valores desde 5.8 a 23 mg g-1 OC. Os rácios levoglucosano/manosano e levoglucosano/(manosano+galactosano) revelaram o predomínio de amostras provenientes da queima de coníferas. Tendo em conta que a estimativa das emissões dos incêndios florestais requer um conhecimento de fatores de emissão apropriados para cada biocombustível, a base de dados abrangente obtida neste estudo é potencialmente útil para atualizar os inventários de emissões. Tem vindo a ser observado que a fase de combustão latente sem chama, a qual pode ocorrer simultaneamente com a fase de chama e durar várias horas ou dias, pode contribuir para uma quantidade considerável de poluentes atmosféricos, pelo que os fatores de emissão correspondentes devem ser considerados no cálculo das emissões globais de incêndios florestais. Devido à falta de informação detalhada sobre perfis químicos de emissão, a base de dados obtida neste estudo pode também ser útil para a aplicação de modelos no recetor no sul da Europa.

A aprendizagem da noção de derivada no 11º ano

Relatório da prática de ensino supervisionada, Mestrado em Ensino da Matemática, Universidade de Lisboa, 2014

Esto es amor: trabalho de projeto

Mestrado Teatro, especialização em artes performativas, teatro música

Tubular Organization of SnO₂ Nanocrystallites for Improved Lithium Ion Battery Anode Performance

Porous tin oxide nanotubes were obtained by vacuum infiltration of tin oxide nanoparticles into porous aluminum oxide membranes, followed by calcination. The porous tin oxide nanotube arrays so prepared were characterized by FE-SEM, TEM, HRTEM, and XRD. The nanotubes are open-ended, highly ordered with uniform cross-sections, diameters and wall thickness. The tin oxide nanotubes were evaluated as a substitute anode material for the lithium ion batteries. The tin oxide nanotube anode could be charged and discharged repeatedly, retaining a specific capacity of 525 mAh/g after 80 cycles. This capacity is significantly higher than the theoretical capacity of commercial graphite anode (372 mAh/g) and the cyclability is outstanding for a tin based electrode. The cyclability and capacities of the tin oxide nanotubes were also higher than their building blocks of solid tin oxide nanoparticles. A few factors accounting for the good cycling performance and high capacity of tin oxide nanotubes are suggested.