Particulate dimethylsulfoniopropionate at DYNAPROC station

In the framework of the projects DYFAMED and PICASSO, diel variations of particulate dimethylsulfoniopropionate (DMSPp) and of its size fraction higher than 10 µm (DMSPp>10 µm) were studied in surface waters of the central Ligurian Sea in May 1990 and May 1995, and in the harbour of the city of Barcelona (Spain) in July 1998. Time series performed in stratified and nitrate depleted surface waters of the Ligurian Sea revealed that DMSPp>10 µm was undergoing diurnal variations. DMSPp-containing particles in the size range higher than 10 µm also markedly affected the DMSPp-to-chlorophyll (chl) a ratio of surface waters on a daily basis. The ratios were 35% to 72% lower at dawn than at dusk. The fact that the diadinoxanthin (DD)-to-chl a ratio of surface phytoplanktonic populations did not exhibit diurnal cycles suggests that physiological adaptation of cellular DMSP and chl a to the light conditions was not a likely process to account for the diurnal changes of the DMSPp-to-chl a ratio. It is suggested that such diurnal variability resulted from changes in plankton composition due to vertical migrations of DMSP-containing organisms larger than 10 µm. We have demonstrated from samples collected in the harbour of the city of Barcelona that DMSP-containing dinoflagellates are active diel migrants. However, the results obtained in the open sea in May 1990 suggest that dinoflagellates and also ciliates contribute to the pool of DMSPp in the size range larger than 10 µm. The results of May 1995 are ambiguous as to the role of dinoflagellates because, in the absence of specific cell counts, DMSPp>10 µm and the pigment peridinin, which is usually present in dinoflagellates (but peridinin-free dinoflagellates exist) showed very different vertical and temporal patterns.

Contrasting seasonal patterns in dimethylsulfide, dimethylsulfoniopropionate, and chlorophyll a in a shallow North Carolina estuary and the Sargasso Sea

Time series measurements of dimethylsulfide (DMS), particulate dimethylsulfoniopropionate (DMSPp), chlorophyll a (chl a), algal pigments, major nutrients, and the potential activity of DMSP lyase enzymes were made over a 2 yr period (6 March 2003 to 28 March 2005) near the mouth of the shallow, tidally mixed Newport River estuary, North Carolina, USA. DMSPp had a mean of 43 ± 20 nM (range = 10.5 to 141 nM, n = 85) and DMS a mean of 2.7 ± 1.2 nM (range = 0.9 to 7.0 nM). The mean DMS in Gallants Channel was not significantly different from that measured in the Sargasso Sea near Bermuda during a previous 3 yr time series study (2.4 ± 1.5 nM), despite there being a 43-fold higher mean chl a concentration (4.9 ± 2.4 µg l–1) at the coastal site. In winter, DMS was low and chl a was high in the surface waters of the Sargasso Sea, while the opposite was true at the coastal site. Consequently, DMS concentrations per unit algal chl a were on average 170 times higher in the Sargasso Sea than at the coastal site during the summer, but only 7 times higher during the winter. The much higher chl a-specific DMS concentrations at the oceanic site during the summer were linked to higher ratios of intracellular DMSP substrate and DMSP lyase enzyme per unit chl a. These differences in turn appear to be linked to large differences in nutrient concentrations and solar UV stress at the 2 sites and to associated differences in the composition of algal assemblages and physiological acclimation of algal cells.

Dynamics of dimethylsulfide and dimethylsulfoniopropionate produced by phytoplankton in the Chinese seas - Distribution patterns and affecting factors

Distribution of dimethylsulfide (DMS) and/or particulate dimethylsulfoniopropionate (DMSPp) concentrations in the Jiaozhou Bay, Zhifu Bay and East China Sea were investigated during the period of 1994 - 1998. Both DMS and DMSPp levels showed remarkable temporal and spatial variations. High values occurred in the coastal or shelf waters and low values in the offshore waters. The highest levels were observed in spring or summer and lowest in autumn. DMS or DMSPp distribution patterns were associated with water mass on a large geographical scale, while biological and chemical factors were more likely influential on smaller-scale variations. Diatoms could play an important role in total DMS or DMSPp abundance in coastal waters. Nitrate was found to have a two-phase relationship with DMSPp concentrations: positive when nitrate concentration was lower than 1 mumol/L, and negative when it was above. Anthropogenic factors such as sewage input and aquaculture also showed influences on DMS or DMSPp concentration.

Sulphur compounds, methane, and phytoplankton during SONNE cruise SO202/2 (Transbrom Sonne)

Here we present results of the first comprehensive study of sulphur compounds and methane in the oligotrophic tropical West Pacific Ocean. The concentrations of dimethylsuphide (DMS), dimethylsulphoniopropionate (DMSP), dimethylsulphoxide (DMSO), and methane (CH4), as well as various phytoplankton marker pigments in the surface ocean were measured along a north-south transit from Japan to Australia in October 2009. DMS (0.9 nmol/l), dissolved DMSP (DMSPd, 1.6 nmol/l) and particulate DMSP (DMSPp, 2 nmol/l) concentrations were generally low, while dissolved DMSO (DMSOd, 4.4 nmol/l) and particulate DMSO (DMSOp, 11.5 nmol/l) concentrations were comparably enhanced. Positive correlations were found between DMSO and DMSP as well as DMSP and DMSO with chlorophyll a, which suggests a similar source for both compounds. Similar phytoplankton groups were identified as being important for the DMSO and DMSP pool, thus, the same algae taxa might produce both DMSP and DMSO. In contrast, phytoplankton seemed to play only a minor role for the DMS distribution in the western Pacific Ocean. The observed DMSPp : DMSOp ratios were very low and seem to be characteristic of oligotrophic tropical waters representing the extreme endpoint of the global DMSPp : DMSOp ratio vs. SST relationship. It is most likely that nutrient limitation and oxidative stress in the tropical West Pacific Ocean triggered enhanced DMSO production leading to an accumulation of DMSO in the sea surface. Positive correlations between DMSPd and CH4, as well as between DMSO (particulate and total) and CH4, were found along the transit. We conclude that both DMSP and DMSO serve as substrates for methanogenic bacteria in the western Pacific Ocean.

Direct linkage between dimethyl sulfide production and microzooplankton grazing, resulting from prey composition change under high partial pressure of carbon dioxide conditions

Oceanic dimethyl sulfide (DMS) is the enzymatic cleavage product of the algal metabolite dimethylsulfoniopropionate (DMSP) and is the most abundant form of sulfur released into the atmosphere. To investigate the effects of two emerging environmental threats (ocean acidification and warming) on marine DMS production, we performed a large-scale perturbation experiment in a coastal environment. At both ambient temperature and 2 °C warmer, an increase in partial pressure of carbon dioxide (pCO2) in seawater (160-830 ppmv pCO2) favored the growth of large diatoms, which outcompeted other phytoplankton species in a natural phytoplankton assemblage and reduced the growth rate of smaller, DMSP-rich phototrophic dinoflagellates. This decreased the grazing rate of heterotrophic dinoflagellates (ubiquitous micrograzers), resulting in reduced DMS production via grazing activity. Both the magnitude and sign of the effect of pCO2 on possible future oceanic DMS production were strongly linked to pCO2-induced alterations to the phytoplankton community and the cellular DMSP content of the dominant species and its association with micrograzers.

Dimethylsulfide (DMS) and Dimethylsulfoniopropionate (DMSP) in Relation to Phytoplankton in the Gulf of Maine

Dimethylsulfide (DMS) and its precursor dimethylsulfoniopropionate (DMSP), in both particulate and dissolved forms, were surveyed during the early spring (March and April) and summer (July) of 1991 in coastal and offshore waters of the Gulf of Maine, USA, along with the hydrography, inorganic nutrients, phytoplankton chlorophyll, and phytoplankton taxonomic composition and abundance. Concentrations as high as 15 nM DMS (in April and July), 208 nM particulate DMSP (in April), and 101 nM dissolved DMSP (in July) were recorded. Total DMSP (dissolved plus particulate) reached 293 nM in a patch of the dinoflagellate Katodinium sp. in April. This is the first report of high DMSP concentrations in temperate waters in early spring associated with any organism other than the prymnesiophyte Phaeocystis pouchetii. There were no correlations between phytoplankton biomass, as measured by chlorophyll a, and DMS, and there were only slight correlations between chlorophyll a and DMSP in either dissolved or particulate form. As previously demonstrated by others, concentrations of intracellular (particulate) DMSP were related more to the presence of specific phytoplankton species rather than to overall phytoplankton biomass. The occurrence of high DMSP and DMS levels in early spring, comparable with or higher than those seen in summer maxima, at a time when bacterial activity is minimal and wind speeds are typically high may result in enhanced air-sea-fluxes of DMS.

Airborne particulate matter at a bus station : concentration levels and governing parameters

Traffic emissions are an important contributor to ambient air pollution, especially in large cities featuring extensive and high density traffic networks. Bus fleets represent a significant part of inner city traffic causing an increase in exposure to general public, passengers and drivers along bus routes and at bus stations. Limited information is available on quantification of the levels, and governing parameters affecting the air pollution exposure at bus stations. The presented study investigated the bus emissions-dominated ambient air in a large, inner city bus station, with a specific focus on submicrometer particles. The study’s objectives were (i) quantification of the concentration levels; (ii) characterisation of the spatio-temporal variation; (iii) identification of the parameters governing the emissions levels at the bus station and (iv) assessment of the relationship between particle concentrations measured at the street level (background) and within the bus station. The results show that up to 90% of the emissions at the station are ultrafine particles (smaller than 100 nm), with the concentration levels up to 10 times the value of urban ambient air background (annual) and up to 4 times the local ambient air background. The governing parameters affecting particle concentration at the station were bus flow rate and meteorological conditions (wind velocity). Particle concentration followed a diurnal trend, with an increase in the morning and evening, associated with traffic rush hours. Passengers’ exposure could be significant compared to the average outdoor and indoor exposure levels.

Prediction of fluidization behaviour and a quasi-stationary approach to drying kinetics of irregular particulate food materials

Changes in fluidization behaviour behaviour was characterised for parallelepiped particles with three aspect ratios, 1:1, 2:1 and 3:1 and spherical particles. All drying experiments were conducted at 500C and 15 % RH using a heat pump dehumidifier system. Fluidization experiments were undertaken for the bed heights of 100, 80, 60 and 40 mm and at 10 moisture content levels. Due to irregularities in shape minimum fluidisation velocity of parallelepiped particulates (potato) could not fitted to any empirical model. Also a generalized equation was used to predict minimum fluidization velocity. The modified quasi-stationary method (MQSM) has been proposed to describe drying kinetics of parallelepiped particulates at 30o C, 40o C and 50o C that dry mostly in the falling rate period in a batch type fluid bed dryer.

Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation

This article reports an enhanced solvent casting/particulate (salt) leaching (SCPL) method developed for preparing three-dimensional porous polyurethane (PU) scaffolds for cardiac tissue engineering. The solvent for the preparation of the PU scaffolds was a mixture of dimethylformamide (DFM) and tetrahydrofuran (THF). The enhanced method involved the combination of a conventional SCPL method and a step of centrifugation, with the centrifugation being employed to improve the pore uniformity and the pore interconnectivity of scaffolds. Highly porous three-dimensional scaffolds with a well interconnected porous structure could be achieved at the polymer solution concentration of up to 20% by air or vacuum drying to remove the solvent. When the salt particle sizes of 212-295, 295-425, or 425-531 µm and a 15% w/v polymer solution concentration were used, the porosity of the scaffolds was between 83-92% and the compression moduli of the scaffolds were between 13 kPa and 28 kPa. Type I collagen acidic solution was introduced into the pores of a PU scaffold to coat the collagen onto the pore walls throughout the whole PU scaffold. The human aortic endothelial cells (HAECs) cultured in the collagen-coated PU scaffold for 2 weeks were observed by scanning electron microscopy (SEM). It was shown that the enhanced SCPL method and the collagen coating resulted in a spatially uniform distribution of cells throughout the collagen-coated PU scaffold.