Dental identification and aspects of medico-legal investigations of the Finnish victims of the Sumatra-Andaman earthquake on 26 December 2004

Tsunami waves of the Sumatra-Andaman earthquake on 26 December 2004 claimed approximately 230 000 lives and started the biggest identification operation in Interpol's history. The aim of this study was to resolve methods of the identification and results received. The viewpoint is mainly that of forensic odontology, but also includes other means of identification and results of the medico-legal examination performed in Finland. Of the 5395 victims in Thailand, approximately 2 400 were foreigners from 36 nations including 177 Finnish nationals. Additionally, a Finnish woman perished in Sri Lanka and a severely injured man after the evacuation in a hospital. The final numbers of missing persons and dead bodies registered in the Information Management Centre in Phuket,Thailand, were 3 574 ante-mortem (AM) and 3 681 post-mortem (PM) files. The number of identifications by December 2006 was 3 271 or 89% of the victims registered. Of Finnish victims, 172 have been identified in Thailand and 163 repatriated to Finland. One adult and four children are still missing. For AM data, a list of Finnish missing persons including 178 names was published on 30 December 2004. By February 2005 all useful dental AM data were available. Five persons on the list living in Finland lacked records. Based on the AM database, for the children under age 18 years (n=60) dental identification could be established for 12 (20%). The estimated number for adults (n=112) was 96 (86%). The final identification rate, based on PM examinations in Finland, was 14 (25%) for children (n= 56) and 98 (90%) for adults (n= 109). The number of Finnish victims identified by dental methods, 112 (68%), was high compared to all examined in Thailand (43%). DNA was applied for 26 Finnish children and for 6 adults, fingerprints for 24 and 7, respectively. In 12 cases two methods were applied. Every victim (n=165) underwent in Finland a medico-legal investigation including an autopsy with sampling specimens for DNA, the toxicological and histological investigation. Digital radiographs and computed tomography were taken of the whole body to verify autopsy findings and bring out changes caused by trauma, autolysis, and sampling for DNA in Thailand. Data for identification purposes were also noted. Submersion was the cause of death for 101 of 109 adults (92.7%), and trauma for 8 (7.3%). Injuries were 33 times contributing factors for submersion and 3 times for trauma-based death. Submersion was the cause of death for 51 (92.7%) children and trauma for 4 (7.3%). Injuries were in 3 cases contributing factors in submersion and once in trauma-based death. The success of the dental identification of Finnish victims is mainly based on careful registration of dental records, and on an education program from 1999 in forensic odontology.

Avaliação da degradação de elásticos ortodônticos intraorais de látex

Avaliou-se a taxa de degradação de elásticos ortodônticos de látex de diferentes fabricantes e diâmetros em diversos intervalos de tempo. Grupos de 15 elásticos de força média dos fabricantes AmericanOrthodontics (Sheboygan, Wis, EUA), Tp (La Porte, IN, EUA), Morelli (Sorocaba, SP, Brasil) e Uniden (Sorocaba, SP, Brasil); de diâmetros 3/16, 1/4 e 5/16 foram analisados nos intervalos de 0,1,3,6,12 e 24 horas, totalizando-se 1080 espécimes. Os elásticos foram estirados individualmente à distância de 30mm, respeitando-se o intervalo de um minuto entre cada estiramento. Os materiais foram acondicionados imersos em água deionizada à 37C. Realizou-se leitura das forças na máquina de ensaios Emic DL 500 (Emic Co, Sao Paulo, Brasil) à velocidade de 30 mm/min, com uma célula de 2Kg (Emic Co, Sao Paulo, Brasil). A leitura de cada elástico consumiu aproximadamente um minuto. Teste Kruskal-wallis com correções por Dunns aferiu significância estatística dos resultados. Foram observadas diferenças entre os grupos analisados, exceto às marcas Morelli e Tp. Foram significativas as inferências das variáveis tempo e marca comercial. Em 0 hora, a relação entre as forças geradas foi Morelli>AO>Uniden>Tp para elásticos 3/16 (p=0,0016) e 1/4 (p=0,0016) e, de Morelli>AO>Tp>Uniden para elásticos 5/16 (p=0,0087). Após 24 horas, as porcentagens de degradação dos elásticos foram AO>Morelli>Uniden>Tp no diâmetro 3/16; AO>Tp>Morelli>Uniden no diâmetro 1/4 e Tp>AO>Uniden>Morelli para elásticos de diâmetro 5/16. O comportamento no intervalo de 0-24 horas demonstrou uma queda acentuada no período de 0-3 horas, um ligeiro aumento em 3-6 horas, seguido de uma queda progressiva no intervalo de 6-24 horas.

Influência de tratamentos térmicos nas propriedades mecânicas e metalúrgicas em liga odontológica à base de níquel-cromo.

É crescente a preocupação com o desenvolvimento de materiais adequados a trabalharem interagindo com o corpo humano. Diversas pesquisas têm sido realizadas no desenvolvimento de biomateriais aplicáveis na odontologia, este empenho é justificável pelo grande número de intervenções cirúrgicas para extração de dentes realizadas em todo o mundo. Durante o processo de fabricação de reconstruções dentárias, que utilizam sistemas metalocerâmicos, é utilizado um tratamento térmico que tem a função de promover a adesão da porcelana ao metal. Entretanto, sabe-se que tratamentos térmicos podem alterar a microestrutura do material metálico, modificando suas propriedades. Este trabalho avaliou as modificações causadas em propriedades mecânicas e microestruturais da liga à base de níquel (FIT CAST-SB) utilizada para fins odontológicos, quando a mesma é submetida ao tratamento térmico para adesão da porcelana (denominado de queima). A liga foi inicialmente fundida através da técnica de centrifugação e cera perdida. Posteriormente, um grupo de amostras (grupo TT) foi submetido ao tratamento térmico de queima para adesão da porcelana e o outro grupo (grupo F), permaneceu apenas submetido ao processo de fundição. Os grupos F e TT foram submetidos a ensaio de tração. Nos grupos F e TT, e no material como recebido pelo fabricante (grupo CR), foram realizados ensaios de microdureza e caracterização microestrutural, esta ultima através da técnica de microscopia eletrônica de varredura (MEV). Os grupos F e CR foram submetidos à análise química quantitativa (em um espectrômetro de emissão atômica) e semi-quantitativa por um sistema de Energy Dispersive Spectroscopy (EDS) acoplado ao MEV, sendo que esta ultima técnica também foi aplicada ao grupo TT. A técnica de tratamento digital de imagem foi aplicada às micrografias dos grupos F e TT, para a determinação de possíveis modificações quantitativas nas fases presentes, antes e após o tratamento térmico. Todos os resultados dos ensaios foram submetidos ao teste de hipótese nula (H0), para a distribuição t de Student. Concluiu-se que, para as amostras testadas, o limite de resistência foi superior ao fornecido pelo fabricante, respectivamente 559,39 e 545,55 MPa para os grupos F e TT, contra 306 MPa do fabricante. Enquanto o limite de escoamento foi ligeiramente inferior, 218,71 e 240,58 MPa para os grupos F e TT, respectivamente, contra 258 MPa do fabricante. Os resultados de microdureza ficaram entorno de 70HV, superior aos 21HV fornecido pelo fabricante. Pode-se afirmar, com 95% de confiabilidade, que não houve variação nas propriedades mecânicas e na microestrutura (quantidades de fases presentes e tamanho) antes e após a queima para adesão da porcelana, para os corpos de prova testados. A microestrutura da liga, quando observada em MEV no modo elétrons retroespalhados (modo BSE), é formada por uma matriz de estrutura dendrítica e coloração cinza, uma segunda fase interdendrítica de coloração branca e aspecto rendilhado, e precipitados de coloração preta, apresentando também porosidades.

As novas diretrizes curriculares e a integralidade em saúde: uma análise das possíveis contribuições da odontologia para o trabalho em equipe

Os debates sobre formação profissional em saúde ampliaram seu espaço na agenda de discussões políticas brasileiras. As Diretrizes Curriculares Nacionais para Cursos na Área de Saúde, homologadas pelo Ministério da Educação em 2001, orientam mudanças em graduação dos profissionais, coerentes com a necessidade indicada pelo Ministério da Saúde de incentivar mudanças na formação em saúde com ênfase na integralidade da atenção. Este trabalho investigou as propostas das novas Diretrizes Curriculares Nacionais para os cursos de odontologia (DCNO), tendo como eixo de análise o princípio da Integralidade em saúde e o trabalho em equipe. A partir do referencial teórico da construção da Integralidade em saúde, foi analisada a percepção de seus elementos no discurso de gestores acadêmicos, professores e alunos de um curso de odontologia e no documento das DCNO. A análise do documento das DCNO demonstrou uma reduzida sistematização das ideias e conceitos associados à integralidade em saúde, reforçando a ênfase nas práticas do Cirurgião-Dentista ao âmbito da Saúde Bucal. A análise das entrevistas revelou certo grau de apropriação, pelos autores estudados, de discursos que ampliam o universo da odontologia, porém referem-se a práticas profissionais e de ensino-aprendizagem ainda bastante calcadas no conhecimento clínico-cirúrgico aplicável ao indivíduo. Existe uma associação entre integralidade em saúde, perfil generalista e trabalho em equipe à integração das especialidades odontológicas, viabilizadas pela integração das clínicas. Nota-se uma tendência à mudança de valores, inclusive nos depoimentos de estudantes, que demonstram interesse nas práticas no setor público, reforçando a necessidade de ampliação da odontologia na arena de discussões sobre a formação em saúde, de modo a aproximar conteúdos e práticas de saúde coletiva com aquelas do campo clínico-cirúrgico sob novas perspectivas e aproximar a teoria da área específica de atuação, avançando na construção do trabalho em equipe.

Mandibular Manipulation for the Treatment of Temporomandibular Disorder

The aim of this study was to conduct a systematic review to identify the randomized clinical studies that had investigated the following research question: Is the mandibular manipulation technique an effective and safe technique for the treatment of the temporomandibular joint disk displacement without reduction? the systematic search was conducted in the electronic databases: PubMed (Medical Publications), LILACS (Latin American and Caribbean Literature in Health Sciences), EMBASE (Excerpta Medica Database), PEDro (Physiotherapy Evidence Database), BBO (Brazilian Library of Odontology), CENTRAL (Library Cochrane), and SciELO (Scientific Electronic Library Online). the abstracts of presentations in physical therapy meetings were manually selected, and the articles of the ones that meet the requirements were investigated. No language restrictions were considered. Only randomized and controlled clinical studies were included. Two studies of medium quality fulfilled all the inclusion criteria. There is no sufficient evidence to support the effectiveness of the mandibular manipulation therapy, and therefore its use remains questionable. Being minimally invasive, this therapy is attractive as an initial approach, especially considering the cost of the alternative approaches. the analysis of the results suggests that additional high-quality randomized clinical trials are necessary on the topic, and they should focus on methods for data randomization and allocation, on clearly defined outcomes, on a priori calculated sample size, and on an adequate follow-up strategy.

Características de personalidade e preferências de aprendizagens: um estudo exploratório

O presente trabalho descreve um estudo exploratório de características de personalidade e preferências de aprendizagem em estudantes universitários de quatro cursos da área da Saúde: Medicina, Odontologia, Enfermagem e Nutrição. Para este estudo utilizou-se como fonte de dados dois instrumentos de medida, as Escalas de personalidade de Comrey e o Inventário de Pre2erências de Aprendizagem. O tratamento dos dados foi feito através das estatísticas distribuição de frequência, correlação e análise da regressão. Os resultados do tratamento estatístico não nos possibilitou. alcançar nenhuma conclusão objetiva das relações entre as variáveis de personalidade e preferências de aprendizagem, no entanto, forneceu-nos dados para posteriores estudos.

Saúde bucal no programa de saude da família: o caso do distrito sanitário norte em Natal - RN

The inclusion of the dentist in the Family Health Program (FHP) teams designates a reorganization of the mouth health care in your country and establishes a new scenario in Brazilian odontology, through of a new way to organize the basic health care, creating conditions to consolidate in mouth health practice actions, in the level of the basic attention, the validation of Unique Health System (UHS) constitutional principles. The purpose of this research is to verify if the actuation of mouth health teams (MHT) dentists, in Natal city north sanitary district, is tuned with FHP goals.The target research population was composed by all dentists working in Basic Health Units (BHU) of Natal north sanitary district. Fifth-eight questionnaires were applied and using open and closed questions we look for identify the functional characteristics of each BHU, the dentists professional attributions on each BHU, as well as the clinical procedures that they execute. This research also searched to identify the factors that facilitate and/or difficult the inclusion process and the dentists activities performance on these BHUs, as well as the necessary actions to north sanitary district MHTs to fulfill the objectives proposed by FHP. The results point that the inclusion of mouth health actions in north sanitary district FHPs brought the incorporation of new values to the used practices. Whoever, its necessary a more frequent evaluation of the carried actions, in a way they can be adapted to the real community necessities, and, is fundamental the data accompaniment, for that these serve of base for planning and redirecting activities, in a way that we do not have only a reproduction of traditional practices, fragmented and isolated, but a truly substitution of the traditional practices and a new way of promoting health

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Determinação da idade dental de crianças brasileiras nordestinas: novos valores de conversão de maturidade dental para população específica

Since Demirjian's system of estimating dental maturity was first described, many researchers from different countries have tested its accuracy among diverse populations. Some of these studies have pointed out a need to determine population-specific standards. In Brazil, the Northeast region is the one that most suffers the negative impact of exodus, specially related to the increase of abandoned children in the cities. The aim of this study was to test the accuracy of Demirjian's system for assessing the dental maturity of northeastern Brazilian children, so as to present a scale for maturity score conversion into dental age developed specifically for this population. This could be used for forensic, anthropological and legal matters, and also as a model for other countries attempting to formulate their own conversion scales. Panoramic radiographs of 1,491 children (821 females and 670 males), aged 7 to 13 years, from Ceará state, northeast Brazil, were assessed by a single observer to determine dental age (DA) according to Demirjian's system. The mean percentage of intra-observer agreement was 86.6%, with a mean Cohen's Kappa coefficient of 0.67 (substantial agreement). The DA was compared by paired t-test to subjects' chronological age (CA). The differences between CA and DA in all age groups were statistically significant (p<0.0001), demonstrating a great advancement in DA among Brazilians. Scatter plots were drawn for both genders, and the data were fitted to a growth curve, y = 100/ (1 + e-a(x b)). Graphs corresponding to the 50th percentile curves were produced. A table with new values for the conversion of maturity score into dental age for northeastern Brazilian children is presented. The great advancement in DA, as obtained by Demirjian's system in this population, justified the determination of specific scores for dental maturity assessment

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Prevalência e determinantes de oclusopatias nas dentições decídua, mista e permanente na cidade do Natal/RN

This work is intended to bring a contribuition to the verification of the prevalance of malocclusion in the deciduous, permanent and mixed dentition in the student population in the city of Natal, Brazil. In this purpose, a sectional study of infantiles aging 5, 8 and 12 years old was carried out. The average prevalance of malocclusions in the group as a whole was 76,5%. Considering the different dentitions separately, the study showed malocclusion prevalence as follows: Deciduous Dentition 75,5%; Mixed Dentition 84% and Permanent Dentition 70,5%. The most common malocclusion cases found in the deciduous dentition were openbite (20.6%); overbite (16.6%) and maxillary overjet (14,7). Mixed Dentition: the most commonly found occlusional malfunctions in this dentitional phase were maxillary overjet (33,8%); crowding (28,3%), and mandillary discrepancy (19,9%). In the univaried analysis, he application of the Chi square test of independence, (significance 5%), has indicated a meaningful association of the variables social class (p=0,019), primata space (p = 0,036), habits (p= 0,002) and time-and-habit (P=0,03). The same test on the permanent dentition group revealed a significant association for the independent variables, as follows: Social class (p=O,OOO), School (p=O,OOI), Income (p=O,OOO), housing standard (p=0,001), facial pattem (p=0,004), caries record (p=0,031). No significant association was found in the mixed dentition. The Logistic Regression analysis on the deciduous dentition has shown that income, ethnicity, habit and canine relationship constitute factors of risk regardless of the other variables. As for the permanent dentition, only Facial Pattem was pointed as a factor of risk for the formation of malocclusion