Increased number of non-degranulated mast cells in pancreatic ductal adenocarcinoma but not in acute pancreatitis.

Increasing evidence indicates that tumor microenvironment (TME) is crucial in tumor survival and metastases. Inflammatory cells accumulate around tumors and strangely appear to be permissive to their growth. One key stroma cell is the mast cell (MC), which can secrete numerous pro- and antitumor molecules. We investigated the presence and degranulation state of MC in pancreatic ductal adenocarcinoma (PDAC) as compared to acute ancreatitis (AP). Three different detection methods: (a) toluidine blue staining, as well as immunohistochemistry for (b) tryptase and (c) c-kit, were utilized to assess the number and extent of degranulation of MC in PDAC tissue (n=7), uninvolved pancreatic tissue derived from tumor-free margins (n=7) and tissue form AP (n=4). The number of MC detected with all three methods was significantly increased in PDAC, as compared to normal pancreatic tissue derived from tumor-free margins (p<0.05). The highest number of MC was identified by c-kit, 22.2∓7.5 per high power field (HPF) in PDAC vs 9.7∓5.1 per HPF in normal tissue. Contrary to MC in AP, where most of the detected MC were found degranulated, MC in PDAC appeared intact. In conclusion, MC are increased in number, but not degranulated in PDAC, suggesting that they may contribute to cancer growth by permitting selective release of pro-tumorogenic molecules.

Heat effects on DNA repair after ionising radiation: hyperthermia commonly increases the number of non-repaired double-strand breaks and structural rearrangements

After ionising radiation double-strand breaks (dsb) are lethal if not repaired or misrepaired. Cell killing is greatly enhanced by hyperthermia and it is questioned here whether heat not only affects dsb repair capacity but also fidelity in a chromosomal context. dsb repair experiments were designed so as to mainly score non-homologous end joining, while homologous recombination was largely precluded. Human male G0 fibroblasts were either preheated (45°C, 20 min) or not before X-irradiation. dsb induction and repair were measured by conventional gel electrophoresis and an assay combining restriction digestion using a rare cutting enzyme (NotI) and Southern hybridisation, which detects large chromosomal rearrangements (>100 kb). dsb induction rate in an X-chromosomal NotI fragment was 4.8 × 10–3 dsb/Gy/Mb. Similar values were found for the genome overall and also when cells were preheated. After 50 Gy, fibroblasts were competent to largely restore the original restriction fragment size. Five per cent of dsb remained non-rejoined and 14% were misrejoined. Correct restitution of restriction fragments occurred preferably during the first hour but continued at a slow rate for 12–16 h. In addition, dsb appeared to misrejoin throughout the entire repair period. After hyperthermia the fractions of non-rejoined and misrejoined dsb were similarly increased to 13 and 51%, respectively. It is suggested that heat increases the probability of dsb being incorrectly rejoined but it is not likely to interfere with one dsb repair pathway in particular.

Relationship between number of ovipositions of Cotesia flavipes (Cam.) and number of descendants emerged from its host Diatraea saccharalis (Fabr.)

Fêmeas de Cotesia flavipes (Cam.) foram introduzidas, individualmente, em placas de Petri contendo uma larva de seu hospedeiro Diatraea saccharalis (Fabr.). Permitiu-se que cada fêmea de C. flavipes realizasse posturas uma ou duas vezes em uma mesma larva. O período de emergência das larvas e dos adultos, a razão sexual, o número de larvas e pupas inviáveis e a longevidade dos adultos de C. flavipes registrados nas duas condições experimentais (uma ou duas posturas) foram comparados. Os resultados revelaram que duas oviposições sucessivas no hospedeiro não alteraram a razão sexual na descendência, mas aumentaram o número de parasitóides e também o número de larvas e pupas inviáveis.

Algorithmic Minimization of Non-zero Entries in 0,1-Matrices

In this paper we present algorithms which work on pairs of 0,1- matrices which multiply again a matrix of zero and one entries. When applied over a pair, the algorithms change the number of non-zero entries present in the matrices, meanwhile their product remains unchanged. We establish the conditions under which the number of 1s decreases. We recursively define as well pairs of matrices which product is a specific matrix and such that by applying on them these algorithms, we minimize the total number of non-zero entries present in both matrices. These matrices may be interpreted as solutions for a well known information retrieval problem, and in this case the number of 1 entries represent the complexity of the retrieve and information update operations.

Optimização do processo de fabrico de componentes para a indústria automóvel

A qualidade é um factor-chave na indústria automóvel. Todos os fornecedores de componentes para a indústria automóvel estão sujeitos a qualificações e auditorias sistemáticas, com vista a melhorar os processos e verificar a sua rastreabilidade. Quando os processos assentam essencialmente em mão-de-obra intensiva, torna-se muito mais difícil atingir a ambicionada meta dos zero-defeitos, e a garantia da qualidade pode ficar comprometida, sendo necessário instalar procedimentos de controlo mais apurados. No entanto, se o processo ou processos forem convenientemente definidos, e se optar por capital intensivo em detrimento da mão-de-obra intensiva, a garantia da qualidade pode ser uma realidade, podendo ser fortemente minimizadas as operações de controlo da qualidade. Este trabalho teve por base a necessidade de reduzir fortemente, ou eliminar mesmo, o aparecimento de defeitos de montagem num sistema designado por remachado. Após cuidada análise do processo instalado, já parcialmente automatizado, mas ainda fortemente dependente de mão-de-obra, procedeu-se ao projecto de um equipamento capaz de reproduzir o mesmo efeito, mas que acomodasse alguns possíveis defeitos oriundos dos fornecedores dos componentes que são inseridos neste conjunto, colocados a montante na cadeia de fornecimento do produto. O equipamento resultante deste trabalho permitiu baixar o tempo de ciclo, acomodar a variabilidade dimensional detectada nos componentes que constituem o conjunto e reduzir drasticamente o número de não-conformidades.

Controle on-line por atributos para o número de não-conformidades no item inspecionado com base em uma sequência de inspeção

This paper proposes a procedure to control on-line processes for attributes, using an Shewhart control chart with two control limits (warning limit and control limit) and will be based on a sequence of inspection (h). The inspection procedure is based on Taguchi et al. (1989), in which to inspect the item, if the number of non-conformities is higher than an upper control limit, the process needs to be stopped and some adjustment is required; and, if the last inspection h, from all items inspected present a number of non-conformities between the control limit and warning limit. The items inspected will suffer destructive inspection, being discarded after inspection. Properties of an ergodic Markov chain are used to get the expression of average cost per item and the aim was the determination of four optimized parameters: the sampling interval of the inspections (m); the constant W to draw the warning limit (W); the constant C to draw the control limit (C), where W £ C, and the length of sequence of inspections (h). Numerical examples illustrate the proposed procedure

Controle on-line para o número de não-conformidades em um ítem inspecionado

The on-line processes control for attributes consists of inspecting a single item at every m produced ones. If the examined item is conforming, the production continues; otherwise, the process stops for adjustment. However, in many practical situations, the interest consist of monitoring the number of non-conformities among the examined items. In this case, if the number of non-conformities is higher than an upper control limit, the process needs to be stopped and some adjustment is required. The contribution of this paper is to propose a control system for the number of nonconforming of the inspected item. Employing properties of an ergodic Markov chain, an expression for the expected cost per item of the control system was obtained and it will be minimized by two parameters: the sampling interval and the upper limit control of the non-conformities of the examined item. Numerical examples illustrate the proposed procedure

Ajuste preventivo versus ajuste corretivo no controle on-line de processo do número de não-conformidades num item inspecionado

In production lines, the entire process is bound to unexpected happenings which may cost losing the production quality. Thus, it means losses to the manufacturer. Identify such causes and remove them is the task of the processing management. The on-line control system consists of periodic inspection of every month produced item. Once any of those items is quali ed as not t, it is admitted that a change in the fraction of the items occurred, and then the process is stopped for adjustments. This work is an extension of Quinino & Ho (2010) and has as objective main to make the monitoramento in a process through the control on-line of quality for the number of non-conformities about the inspected item. The strategy of decision to verify if the process is under control, is directly associated to the limits of the graphic control of non-conformities of the process. A policy of preventive adjustments is incorporated in order to enlarge the conforming fraction of the process. With the help of the R software, a sensibility analysis of the proposed model is done showing in which situations it is most interesting to execute the preventive adjustment

Um estudo sobre a utilização de sistemas, programas e ferramentas da qualidade em empresas do interior de São Paulo

O desenvolvimento e implantação de sistemas de gestão da qualidade e o uso de programas e ferramentas da qualidade são algumas das opções mais utilizadas pelos gestores para aumentar a competitividade de suas empresas. Nesse contexto, o objetivo deste artigo é apresentar o resultado de uma pesquisa tipo survey em que se verificaram e analisaram as principais características do processo de certificação ISO 9001, seus benefícios, suas dificuldades e quais programas e ferramentas da qualidade são utilizados em 236 empresas do interior do Estado de São Paulo. A pesquisa revelou que a certificação ISO 9001 gera benefícios significativos às organizações, tais como: melhoria dos processos internos e nos seus produtos; aumento da satisfação dos clientes; diminuição do número de não conformidades e de devoluções; aumento da produtividade e do lucro; melhoria no gerenciamento dos recursos e valorização da imagem da empresa no mercado. Ela também ratificou a importância da utilização dos programas e ferramentas da qualidade como forma de as empresas se adequarem melhor aos requisitos da norma ISO 9001. As dificuldades de desenvolvimento e implantação desses sistemas não se confirmaram para a amostra pesquisada. Apenas a resistência à mudança, dentre todas apresentadas, mereceu destaque para os pesquisados.

Avaliação estrutural e higiênico-sanitária de estabelecimentos alimentícios de Botucatu-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of pore ring number of zeolites on catalytic performance of Mo/Zeolite in methane aromatization under non-oxygen condition

The catalytic behavior of Mo-based zeolite catalysts with different pore structure and size, particularly with 8 membered ring ( M R), 10 M R, coexisted 10 and 12 M R, and 12 M R, was studied in methane aromatization under the conditions of SV=1500 ml/(g.h), p=0.1 MPa and T = 973 K. It was found that the catalytic performance is correlated with the pore structure of the zeolite supports. The zeolites that possess 10 MR or 10 and 12 MR pore structure with a pore diameter equal to or slightly larger than the dynamic diameter of benzene molecule, such as ZSM-5, ZSM-11, ZRP-1 and MCM-22, are fine supports. Among the tested zeolite supports, MCM-22 exhibits the highest activity and selectivity for benzene. A methane conversion of 10.5% with benzene selectivity of 80% was achieved over Mo/MCM-22 catalyst. The Mo/ERS-7 catalyst with 8 MR (0.45 nm) does not show any activity in methane dehydro-aromatization, while Mo/JQX-1 and Mo/SBA-15 catalysts with 12 MR pore exhibit little activity in the reaction. It can be concluded that the zeolites with 10 MR pore or coexisted 10 and 12 MR, having pore size equal to or slightly larger than the dynamic diameter of benzene molecule, are fine supports for methane activation and aromatization.

Human Non-neutralizing HIV-1 Envelope Monoclonal Antibodies Limit the Number of Founder Viruses during SHIV Mucosal Infection in Rhesus Macaques.

HIV-1 mucosal transmission begins with virus or virus-infected cells moving through mucus across mucosal epithelium to infect CD4+ T cells. Although broadly neutralizing antibodies (bnAbs) are the type of HIV-1 antibodies that are most likely protective, they are not induced with current vaccine candidates. In contrast, antibodies that do not neutralize primary HIV-1 strains in the TZM-bl infection assay are readily induced by current vaccine candidates and have also been implicated as secondary correlates of decreased HIV-1 risk in the RV144 vaccine efficacy trial. Here, we have studied the capacity of anti-Env monoclonal antibodies (mAbs) against either the immunodominant region of gp41 (7B2 IgG1), the first constant region of gp120 (A32 IgG1), or the third variable loop (V3) of gp120 (CH22 IgG1) to modulate in vivo rectal mucosal transmission of a high-dose simian-human immunodeficiency virus (SHIV-BaL) in rhesus macaques. 7B2 IgG1 or A32 IgG1, each containing mutations to enhance Fc function, was administered passively to rhesus macaques but afforded no protection against productive clinical infection while the positive control antibody CH22 IgG1 prevented infection in 4 of 6 animals. Enumeration of transmitted/founder (T/F) viruses revealed that passive infusion of each of the three antibodies significantly reduced the number of T/F genomes. Thus, some antibodies that bind HIV-1 Env but fail to neutralize virus in traditional neutralization assays may limit the number of T/F viruses involved in transmission without leading to enhancement of viral infection. For one of these mAbs, gp41 mAb 7B2, we provide the first co-crystal structure in complex with a common cyclical loop motif demonstrated to be critical for infection by other retroviruses.

Persons who served more than six months in the War of 1812 : letter from the Secretary of War, transmitting in compliance with a resolution of the House calling for a statement of the number of officers, non-commissioned officers, privates, &c., who served for a period of six months and upwards in the War of 1812.--

Caption title.

Using non-homogeneous Poisson models with multiple change-points to estimate the number of ozone exceedances in Mexico City

In this paper, we consider some non-homogeneous Poisson models to estimate the probability that an air quality standard is exceeded a given number of times in a time interval of interest. We assume that the number of exceedances occurs according to a non-homogeneous Poisson process (NHPP). This Poisson process has rate function lambda(t), t >= 0, which depends on some parameters that must be estimated. We take into account two cases of rate functions: the Weibull and the Goel-Okumoto. We consider models with and without change-points. When the presence of change-points is assumed, we may have the presence of either one, two or three change-points, depending of the data set. The parameters of the rate functions are estimated using a Gibbs sampling algorithm. Results are applied to ozone data provided by the Mexico City monitoring network. In a first instance, we assume that there are no change-points present. Depending on the adjustment of the model, we assume the presence of either one, two or three change-points. Copyright (C) 2009 John Wiley & Sons, Ltd.