990 resultados para natural service
Resumo:
Landslide is a kind of serious geological hazards and its damage is very great. In recent years, landslides become more and more frequent along with increase of scale of engineering constructions and cause greater loss. Consequently, how to protect landslides has become important research subject in the engineering field. This paper improves the method how to compute landslide thrust and solves the irrational problem in the design of piles because of the irrational landslide thrust according to the theory and technology of existed anti-slide piles and pre-stressed cable anti-slide piles. Modern pre-stressing technology has been introduced and load balancing method has been used to improve the stressing behavior of anti-slide piles. Anchor cables, anti-slide piles and modern pre-stressing technology have been used to prevention complicated landslide. It is an important base to select values for the landslide thrust. An improved method to calculate design thrust of anti-slide piles has been presented in this paper on the base of residual thrust method by comparing existing methods to select values of landslide thrust in the design of anti-slide piles. In the method, residual landslide thrust behind the anti-slide piles and residual skid resistance before the piles has been analyzed, equitable distribution of residual landslide thrust behind the piles has been realized, and the method to select value of design thrust becomes more reasonable. The pre-stressed cable anti-slide piles are developed from the common anti-slide piles and are common method to prevent landslide. Their principle is that internal force of anti-slide piles is adjusted and size of section is diminished by changing constraint conditions of anti-slide piles. For landslides with deep slip surface and large scale of slopes, limitation of the method appears. Such landslides are in need of long piles and anchor cables which are not only non-economic but also can generate larger deformation and leave potential danger after prevention. For solving the problem, a new kind of anti-slide piles, inner pre-stressing force anti-slide piles, is presented in this paper, and its principle is that an additional force, which is generated in the inner anti-slide piles by arranging pre-stressed reinforcement or tight wire in a certain form in interior of anti-slide piles and stretching the steel reinforcement or tight wire, may balance out the internal force induced by landslide thrust whole or partly (load balancing method). The method will change bending moment which anti-slide piles are not good at bearing into compressive stress which piles are good at bearing, improve stressing performance of anti-slide piles greatly, diminish size of section, and make anti-slide piles not fissured in the natural service or postpone appearance of the fissures, and improve viability of anti-slide piles. Pre-stressed cable anti-slide piles and inner pre-stressing force anti-slide piles go by the general name of pre-stressed structure anti-slide piles in the paper, and their design and calculation method is also analyzed. A new calculation method is provided in the paper for design of anti-slide piles. For pre-stressed structure anti-slide piles, a new computation mode is firstly presented in the paper on the foundation of cantilever piles. In the mode, constraint form of load-bearing section of the anti-slide piles should be confirmed according to reservoir conditions in order to figure out amount of pre-stress of the anchor cables, and internal force should be analyzed for the load-bearing section of pre-stressed structure anti-slide piles so as to confirm anchorage section of anti-slide piles. Pre-stressed cables of the pre-stressed cable anti-slide piles can be arranged as required. This paper analyzes the load-bearing section of single-row and double-row pre-stressed cable anti-slide piles and provides a calculation method for design of the pre-stressed cable anti-slide piles. Inner pre-stressing force anti-slide piles are a new kind of structural style. Their load-bearing section is divided into four computation modes according to whether pre-stressed cables are applied for exterior of the anti-slide piles, and whether single-row or double-row exterior pre-stressed cables are applied. The load balancing method is used to analyze the computation modes for providing a method to design the inner pre-stressing force anti-slide piles rationally. Pre-stressed cable anti-slide piles and inner pre-stressing force anti-slide piles are applied to research on Mahe landfall in Yalong Lenggu hydropower station by the improved method to select value of design thrust of anti-slide piles. A good effect is obtained in the analysis.
Resumo:
A 2-year longitudinal survey was carried out to investigate factors affecting reproduction in crossbred cows on smallholder farms in and around an urban centre. Sixty farms were visited at approximately 2-week intervals and details of reproductive traits and body condition score (BCS) were collected. Fifteen farms were within the town (U), 23 farms were approximately 5 km from town (SU), and 22 farms approximately 10 km from town (PU). Sources of variation in reproductive traits were investigated using a general linear model (GLM) by a stepwise forward selection and backward elimination approach to judge important independent variables. Factors considered for the first step of formulation of the model included location (PU, SU and U), type of insemination, calving season, BCS at calving, at 3 months postpartum and at 6 months postpartum, calving year, herd size category, source of labour (hired and family labour), calf rearing method (bucket and partial suckling) and parity number of the cow. The effects of the independent variables identified were then investigated using a non-parametric survival technique. The number of days to first oestrus was increased on the U site (p = 0.045) and when family labour was used (p = 0.02). The non-parametric test confirmed the effect of site (p = 0.059), but effect of labour was not significant. The number of days from calving to conception was reduced by hiring labour (p = 0.003) and using natural service (p = 0.028). The non-parametric test confirmed the effects of type of insemination (p = 0.0001) while also identifying extended calving intervals on U and SU sites (p = 0.014). Labour source was again non-significant. Calving interval was prolonged on U and SU sites (p = 0.021), by the use of AI (p = 0.031) and by the use of family labour (p = 0.001). The non-parametric test confirmed the effect of site (p = 0.008) and insemination type (p > 0.0001) but not of labour source. It was concluded that under favourable conditions (PU site, hired labour and natural service) calving intervals of around 440 days could be achieved.
Resumo:
The objective of this experiment was to evaluate effects of treatments with intravaginal progesterone (N) device and/or 48 h temporary weaning (TW) on reproductive performance of postpartum anestrous crossbred Angus x Nelore cows, throughout the breeding season (BS). Anestrous cows (n = 296; 53 5 DPP, body condition score between 2.5 and 3.5, on a 1-5 scale) were assigned randomly to four treatments (2 x 2 factorial design): (1) Control Group (no treatment; n = 73); (2) TW Group (48 h TW beginning on day 0 of BS; n = 70); (3) P4 Group (Intravaginal P4 device between days -7 and 0 of BS; n = 73); and (4) P4+TW Group (Intravaginal P4 device between days -7 and 0 of BS followed by 48h TW; n=70). on day 0 of BS (when P4 devices were removed and TW was initiated), cows had their ovaries evaluated by ultrasonography aiming to evaluate size of the largest follicle. Signs of behavioral estrus were observed twice a day (morning and evening), between days 0 and 25 of BS, and cows observed in estrus were inseminated 12 h later. Between days 26 and 80 of BS, cows were submitted to natural service. Pregnancy diagnosis was conducted by transrectal ultrasonography on days 32 and 53 (pregnancies by AI) and 114 (pregnancies by natural service). Rates of detection of estrus during the first 3 days and within 25 days of BS were greater in cows receiving TW (45.0% compared with 9.6% and 50.0% compared with 29.5%, respectively; P < 0.01). Conception rate in cows inseminated in the first 3 days of BS was greater in cows treated with P4 (54.8% compared with 11.1 %; P < 0.01). Combining P4+TW increased pregnancy rate in the first 3 days (Control: 1.4%, TW: 4.3%, P4: 8.2% and P4+TW: 24.3%; P < 0.01) and in 25 days of BS (Control: 10.9%, TW: 7.1%, P4: 13.7% and P4+TW: 28.6%; P < 0.05). Pregnancy rate at the end of BS did not differ among treatment groups. In conclusion, TW alone increased estrous behavior whereas P4 alone benefited conception. Combining P4 with TW improved pregnancy rate with direct benefits to behavioral estrus and conception. (c) 2008 Elsevier B.V. All rights reserved.
Resumo:
Five experiments were conducted on commercial farms in Brazil designed to develop the basis for an estrus synchronization protocol using melengestrol acetate (MGA) in Bos indicus cattle. These studies resulted in the development of the following protocol: 0.5 mg.d(-1) of MGA between d -14 and -1; 2.0 mg i.m. injection of estradiol cypionate on d -9; 48 h temporary weaning between d 0 and 2; and natural service beginning on d 0. The basis of this protocol was to induce estrous cyclicity before postpartum loss of body condition, prevent premature luteolysis, eliminate the need for labor required to detect estrus, and consequently increase the likelihood of pregnancy early during the postpartum period. This treatment effectively induced estrous cyclicity among anestrous cows, synchronized estrus activity, and prevented premature luteolysis with no negative effect on pregnancy.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Switzerland is officially free from bovine Tritrichomonas foetus. While bulls used for artificial insemination (AI) are routinely examined for this pathogen, bulls engaged in natural mating, as well as aborted fetuses, are only very sporadically investigated, indicating that the disease awareness for bovine tritrichomoniasis is low. Natural mating in cattle is becoming increasingly popular in Switzerland. Accordingly, a re-introduction/re-occurrence of T. foetus in cattle seems possible either via resurgence from a yet unknown bovine reservoir, or via importation of infected cattle. The low disease awareness for bovine tritrichomoniasis might favor an unnoticed re-establishment of T. foetus in the Swiss cattle population. The aim of our study was thus to search for the parasite, and if found, to assess the prevalence of bovine T. foetus in Switzerland. We included (1) bulls over two years of age used in natural mating and sent to slaughter, (2) bulls used for natural service in herds with or without fertility problems and (3) aborted fetuses. Furthermore, the routinely examined bulls used for AI (4) were included in this study. In total, 1362 preputial samples from bulls and 60 abomasal fluid samples of aborted fetuses were analyzed for the presence of T. foetus by both in vitro cultivation and molecular analyses. The parasite could not be detected in any of the samples, indicating that the maximal prevalence possibly missed was about 0.3% (95% confidence). Interestingly, in preputial samples of three bulls of category 1, apathogenic Tetratrichomonas sp. was identified, documenting a proof-of-principle for the methodology used in this study.
