El modelo multi-regional simplificado y otras técnicas de proyección regional, ilustradas con datos brasileros y chilenos

Incluye Bibliografía

A multi-regional view on aging societies accounting for the existence of non-tradable goods

This thesis assesses the question, whether accounting for non-tradable goods sectors in a calibrated Auerbach-Kotlikoff multi-regional overlapping-generations-model significantly affects this model’s results when simulating the economic impact of demographic change. Non-tradable goods constitute a major part of up to 80 percent of GDP of modern economies. At the same time, multi-regional overlapping-generations-models presented by literature on demographic change so far ignored their existence and counterfactually assumed perfect tradability between model regions. Moreover, this thesis introduces the assumption of an increasing preference share for non-tradable goods of old generations. This fact-based as-sumption is also not part of models in relevant literature. rnThese obvious simplifications of common models vis-à-vis reality notwithstanding, this thesis concludes that differences in results between a model featuring non-tradable goods and a common model with perfect tradability are very small. In other words, the common simplifi-cation of ignoring non-tradable goods is unlikely to lead to significant distortions in model results. rnIn order to ensure that differences in results between the ‘new’ model, featuring both non-tradable and tradable goods, and the common model solely reflect deviations due to the more realistic structure of the ‘new’ model, both models are calibrated to match exactly the same benchmark data and thus do not show deviations in their respective baseline steady states.rnA variation analysis performed in this thesis suggests that differences between the common model and a model with non-tradable goods can theoretically be large, but only if the bench-mark tradable goods sector is assumed to be unrealistically small.rnFinally, this thesis analyzes potential real exchange rate effects of demographic change, which could occur due to regional price differences of non-tradable goods. However, results show that shifts in real exchange rate based on these price differences are negligible.rn

An Economic Derivation on Trade Coefficients under the Framework of Multi-regional I-O Analysis

The gravity model, entropy model, potential type model and others like these have been adopted to formulate interregional trade coefficients under the framework of Multi-Regional I-O (MRIO) analysis. Since most of these models are based upon analogies in physics or on statistical principles, they do not provide a theoretical explanation from the view of a firm's or individual's rational and deterministic decision making. In this paper, according to the deterministic choice theory, not only is an alternative formulation of the trade coefficients presented, but also a discussion of an appropriate definition for purchasing prices indices. Since this formulation is consistent with the MRIO system, it can be employed as a useful model-building tool in multi-regional models such as the spatial CGE model.

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Transport Sector and Regional Price Differentials: A SCGE Model for Chinese Provinces

With regression formulas replaced by equilibrium conditions, a spatial CGE model can substantially reduce data requirements. Detailed regional analyses are thus possible in countries where only limited regional statistics are available. While regional price differentials play important roles in multi-regional settings, transport does not receive much attention in existing models. This paper formulates a spatial CGE model that explicitly considers the transport sector and FOB/CIF prices. After describing the model, performance of our model is evaluated by comparing the benchmark equilibrium for China with survey-based regional I-O and interregional I-O tables for 1987. The structure of Chinese economies is summarized using information obtained from the benchmark equilibrium computation. This includes regional and sectoral production distributions and price differentials. The equilibrium for 1997 facilitates discussion of changes in regional economic structures that China has experienced in the decade.

Application of the Input-Output Decomposition Technique to China's Regional Economies

Structural decomposition techniques based on input-output table have become a widely used tool for analyzing long term economic growth. However, due to limitations of data, such techniques have never been applied to China's regional economies. Fortunately, in 2003, China's Interregional Input-Output Table for 1987 and Multi-regional Input-Output Table for 1997 were published, making decomposition analysis of China's regional economies possible. This paper first estimates the interregional input-output table in constant price by using an alternative approach: the Grid-Search method, and then applies the standard input-output decomposition technique to China's regional economies for 1987-97. Based on the decomposition results, the contributions to output growth of different factors are summarized at the regional and industrial level. Furthermore, interdependence between China's regional economies is measured and explained by aggregating the decomposition factors into the intraregional multiplier-related effect, the feedback-related effect, and the spillover-related effect. Finally, the performance of China's industrial and regional development policies implemented in the 1990s is briefly discussed based on the analytical results of the paper.

The incentives for supply chain collaboration to improve material efficiency in the use of steel: An analysis using input output techniques

In the face of increasing demand and limited emission reduction opportunities, the steel industry will have to look beyond its process emissions to bear its share of emission reduction targets. One option is to improve material efficiency - reducing the amount of metal required to meet services. In this context, the purpose of this paper is to explore why opportunities to improve material efficiency through upstream measures such as yield improvement and lightweighting might remain underexploited by industry. Established input-output techniques are applied to the GTAP 7 multi-regional input-output model to quantify the incentives for companies in key steel-using sectors (such as property developers and automotive companies) to seek opportunities to improve material efficiency in their upstream supply chains under different short-run carbon price scenarios. Because of the underlying assumptions, the incentives are interpreted as overestimates. The principal result of the paper is that these generous estimates of the incentives for material efficiency caused by a carbon price are offset by the disincentives to material efficiency caused by labour taxes. Reliance on a carbon price alone to deliver material efficiency would therefore be misguided and additional policy interventions to support material efficiency should be considered. © 2013 Elsevier B.V.

Variation in use of surveillance colonoscopy among colorectal cancer survivors in the United States.

BACKGROUND: Clinical practice guidelines recommend colonoscopies at regular intervals for colorectal cancer (CRC) survivors. Using data from a large, multi-regional, population-based cohort, we describe the rate of surveillance colonoscopy and its association with geographic, sociodemographic, clinical, and health services characteristics. METHODS: We studied CRC survivors enrolled in the Cancer Care Outcomes Research and Surveillance (CanCORS) study. Eligible survivors were diagnosed between 2003 and 2005, had curative surgery for CRC, and were alive without recurrences 14 months after surgery with curative intent. Data came from patient interviews and medical record abstraction. We used a multivariate logit model to identify predictors of colonoscopy use. RESULTS: Despite guidelines recommending surveillance, only 49% of the 1423 eligible survivors received a colonoscopy within 14 months after surgery. We observed large regional differences (38% to 57%) across regions. Survivors who received screening colonoscopy were more likely to: have colon cancer than rectal cancer (OR = 1.41, 95% CI: 1.05-1.90); have visited a primary care physician (OR = 1.44, 95% CI: 1.14-1.82); and received adjuvant chemotherapy (OR = 1.75, 95% CI: 1.27-2.41). Compared to survivors with no comorbidities, survivors with moderate or severe comorbidities were less likely to receive surveillance colonoscopy (OR = 0.69, 95% CI: 0.49-0.98 and OR = 0.44, 95% CI: 0.29-0.66, respectively). CONCLUSIONS: Despite guidelines, more than half of CRC survivors did not receive surveillance colonoscopy within 14 months of surgery, with substantial variation by site of care. The association of primary care visits and adjuvant chemotherapy use suggests that access to care following surgery affects cancer surveillance.

Impacto de entrada da Venezuela no Mercosul: uma simulação com modelo de equilíbrio geral computável

O Objetivo deste Estudo é Avaliar os Impactos da Entrada da Venezuela no Mercosul Utilizando para Tanto o Modelo de Equilíbrio Geral Computável Multi-Setorial e Multi-Regional Denominado Global Trade Analysis Project (Gtap). Além da Introdução, o Estudo Está Dividido em Outras 5 Seções. na Seção 2, são Analisados os Documentos Mais Relevantes Assinados Pelos Estados-Parte, Ressaltando a Relativa Rapidez da Assinatura do Acordo de Adesão da Venezuela ao Bloco; na Seção 3, Descreve-Se o Estado Atual do Fluxo de Comércio entre Venezuela e Mercosul, Assim como as Condições de Acesso a Mercados, Ressaltando a Importância da Venezuela para o Mercosul e a Proteção Ligeiramente Maior Aplicada Pela Economia Venezuelana Quando Comparada com a do Mercosul. na Seção Seguinte, Descrevem-Se os Choques Tarifários Implementados em Três Simulações, Representativas da Adesão da Venezuela ao Mercosul, Além de Hipóteses de Fechamento do Modelo. na Seção 5, os Resultados da Simulação são Apresentados e Discutidos. Sinteticamente, Chama-Se À Atenção para o Aumento de Bem Estar nos Países Envolvidos e o Significativo Impacto Setorial, Especialmente nos Setores de Automóveis, Máquinas e Equipamentos e Têxteis e Vestuário. uma Última Seção Sumaria as Principais Conclusões do Trabalho.

Impacto de propostas de redução de tarifas em bens não agrícolas (NAMA)

O objetivo deste estudo é avaliar, por meio de um modelo de equilíbrio geral computável, multi-setorial e multi-regional, os impactos de uma redução das tarifas dos bens não agrícolas sobre a economia brasileira, a partir da Fórmula Suíça, com diferentes coeficientes. O modelo de equilíbrio geral utilizado é o Global Trade Analysis Project (GTAP) e os cortes de tarifas foram estimados a partir de dados do MAcMap. Além dos impactos macroeconômicos e setoriais, testou-se a sensibilidade do modelo ao aumento das elasticidades de Armington e à implementação de liberalização tarifária agrícola.

Is It Worthwhile for Indonesia to Rush into a Free Trade Deal with Japan?

This report represents a preliminary attempt to refine some basic ideas on the potential impact Indonesia might experience from a free trade arrangement with Japan, using a forward-looking, multi-regional, multi-sectoral applied general equilibrium model of global trade to capture growth effects through capital accumulation paying attention to the changes in the patterns of interregional capital flows that might happen even before the policy change occurs. The simulation results revealed that the welfare gains of rushing into trade liberalization with Japan are not so large. This makes out that taking time over negotiations might be the best choice for Indonesia if the government places priority on convincing the Indonesian people that a free trade deal with Japan will definitely bring positive effects, while proceeding rapidly might be the answer if the country is serious about recovering the welfare levels that might be lowered by free trade arrangements among Malaysia, the Philippines, and Japan.

Trade Coefficients and the Role of Elasticity in a Spatial CGE Model Based on the Armington Assumption

The Armington Assumption in the context of multi-regional CGE models is commonly interpreted as follows: Same commodities with different origins are imperfect substitutes for each other. In this paper, a static spatial CGE model that is compatible with this assumption and explicitly considers the transport sector and regional price differentials is formulated. Trade coefficients, which are derived endogenously from the optimization behaviors of firms and households, are shown to take the form of a potential function. To investigate how the elasticity of substitutions affects equilibrium solutions, a simpler version of the model that incorporates three regions and two sectors (besides the transport sector) is introduced. Results indicate: (1) if commodities produced in different regions are perfect substitutes, regional economies will be either autarkic or completely symmetric and (2) if they are imperfect substitutes, the impact of elasticity on the price equilibrium system as well as trade coefficients will be nonlinear and sometimes very sensitive.

Compilation, application and challenge of IDE-JETRO's International Input-Output tables

International input-output tables are among the most useful tools for economic analysis. Since these tables provide detailed information about international production networks, they have recently attracted considerable attention in research on spatial economics, global value chains, and issues relating to trade in value-added. The Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) has more than 40 years of experience in the construction and analysis of international input-output tables. This paper explains the development of IDE-JETRO’s multi-regional input-output projects including the construction of the Asian International Input-Output table and the Transnational Interregional Input-Output table between China and Japan. To help users understand the features of the tables, this paper also gives examples of their application.