M-Dimension : multi-characteristics based routing protocol in human associated delay-tolerant networks with improved performance over one dimensional classic models

Human associated delay-tolerant network (HDTN) is a new delay-tolerant network where mobile devices are associated with humans. It can be viewed from both their geographic and social dimensions. The combination of these different dimensions can enable us to more accurately comprehend a delay-tolerant network and consequently use this multi-dimensional information to improve overall network efficiency. Alongside the geographic dimension of the network which is concerned with geographic topology of routing, social dimensions such as social hierarchy can be used to guide the routing message to improve not only the routing efficiency for individual nodes, but also efficiency for the entire network.

We propose a multi-dimensional routing protocol (M-Dimension) for the human associated delay-tolerant network which uses the local information derived from multiple dimensions to identify a mobile node more accurately. Each dimension has a weight factor and is organized by the Distance Function to select an intermediary and applies multi-cast routing. We compare M-Dimension to existing benchmark routing protocols using the MIT Reality Dataset, a well-known benchmark dataset based on a human associated mobile network trace file. The results of our simulations show that M-Dimension has a significant increase in the average success ratio and is very competitive when End-to-End Delay of packet delivery is used in comparison to other multi-cast DTN routing protocols.

Diversity and degrees of freedom of cooperative wireless networks

Two key parameters in the outage characterization of a wireless fading network are the diversity and the degrees of freedom (DOF). These two quantities represent the two endpoints of the diversity multiplexing gain tradeoff, In this paper, we present max-flow min-cut type theorems for computing both the diversity and the DOF of arbitrary single-source single-sink networks with nodes possessing multiple antennas. We also show that an amplify-and-forward protocol is sufficient to achieve the same. The DOF characterization is obtained using a conversion to a deterministic wireless network for which the capacity was recently found. This conversion is operational in the sense that a capacity-achieving scheme for the deterministic network can be converted into a DOF-achieving scheme for the fading network. We also show that the diversity result easily extends to multisource multi-sink networks whereas the DOF result extends to a single-source multi-cast network. Along the way, we prove that the zero error capacity of the deterministic network is the same as its c-error capacity.

Mass loss and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings

In this work, multi-component white cast iron was applied by HVOF thermal spray process as alternative to other manufacture processes. Effects of substrate type, substrate pre-heating and heat treatment of coating on mass loss have been determined by rubber wheel apparatus in accordance with ASTM G-65. Furthermore, influence of heat treatment of coating on wear mechanisms was also determined by scanning electron microscopy analysis. Heat-treated coatings presented mass loss three times lower than as-sprayed coatings. Furthermore, wear mechanisms of as-sprayed coating are micro-cutting associated with cracks close to unmelted particles and pores. In heat-treated coating, lesser mass loss is due to sintering. (C) 2011 Elsevier B.V. All rights reserved.

Hardware accelerated ray cast of volume data and volume gradient for an optimized splines-based multi-resolution 2D-3D registration

This paper describes a method for DRR generation as well as for volume gradients projection using hardware accelerated 2D texture mapping and accumulation buffering and demonstrates its application in 2D-3D registration of X-ray fluoroscopy to CT images. The robustness of the present registration scheme are guaranteed by taking advantage of a coarse-to-fine processing of the volume/image pyramids based on cubic B-splines. A human cadaveric spine specimen together with its ground truth was used to compare the present scheme with a purely software-based scheme in three aspects: accuracy, speed, and capture ranges. Our experiments revealed an equivalent accuracy and capture ranges but with much shorter registration time with the present scheme. More specifically, the results showed 0.8 mm average target registration error, 55 second average execution time per registration, and 10 mm and 10° capture ranges for the present scheme when tested on a 3.0 GHz Pentium 4 computer.

The actor-critic algorithm as multi-time-scale stochastic approximation

The actor-critic algorithm of Barto and others for simulation-based optimization of Markov decision processes is cast as a two time Scale stochastic approximation. Convergence analysis, approximation issues and an example are studied.

The cast net fishery, Kainji Lake, Nigeria 1970-1997

This study was carried out to establish trends in the cast net fishery of Kainji Lake, Nigeria. The cast net fishery was second in importance to the gillnet fishery in the early years after impoundment of the lake and still continues to be an important component of the fishery. Some of the economically important species such as Citharinus spp, Tilapia spp, Labeo spp, Alestes spp and Synodontis spp are exploited by cast nets. The study has not revealed any drastic perturbation in the species diversity, catch composition, and any real ecosystem overfishing. On the other hand, both the catfish, Auchenoglanis spp and the predator Hydrocynus spp appear to have increased in the catch in recent years. Never-the-less there is a decline in the mean weight of the major exploited fish species due to the capture of under sized fishes without allowing them to grow to 'legally' marketable sizes. The use of small meshed cast net and also fishing in the shallow waters of the lake can give rise to this situation. Thus, there are signs of growth overfishing in the fish stocks. It must also be acknowledged that the situation is complicated by the fact that in a multi-gear fishery as on Kainji Lake, the cast net fishery could not be managed in isolation without due regard to the other competing gears. The catch per unit of effort (CPUE) has declined in the cast net fishery possibly due to the increase in effort by the major fishing gears over the years. The ongoing extension campaigns by the KLFPP appears to be having the desired effect, as there was reduction in the number of the major fishing gears on the Lake in 1997. It can be anticipated that if this trend continues, the CPUE will recover in the long run. Yields observed from the mesh selectivity study revealed that for major species in the cast net fishery, both by number and weight, were maximal at 2.5 inch mesh, which contrasts with the fact that current minimum allowable mesh in the Fisheries Edict for the Lake is 2.0 inch. The adoption of 2.5 inch as the minimum allowable mesh in the cast net fishery is recommended to be included in future revision of existing regulations. It is also recommended that for this control to have a desired effect, the casting of the net from the shore should be prohibited so as to reduce the incidence of juvenile mortality in the nursery areas. (PDF contains 28 pages)

The numerical modelling of multi-physics phenomena: The shape casting process

In this paper a computer simulation tool capable of modelling multi-physics processes in complex geometry has been developed and applied to the casting process. The quest for high-quality complex casting components demanded by the aerospace and automobile industries, requires more precise numerical modelling techniques and one that need to be generic and modular in its approach to modelling multi-processes problems. For such a computer model to be successful in shape casting, the complete casting process needs to be addressed, the major events being:-• Filling of hot liquid metal into a cavity mould • Solidification and latent heat evolution of liquid metal • Convection currents generated in liquid metal by thermal gradients • Deformation of cast and stress development in solidified metal • Macroscopic porosity formation The above phenomena combines the analysis of fluid flow, heat transfer, change of phase and thermal stress development. None of these events can be treated in isolation as they inexorably interact with each other in a complex way. Also conditions such as design of running system, location of feeders and chills, moulding materials and types of boundary conditions can all affect on the final cast quality and must be appropriately represented in the model.

FlexiArch-stress ribbon combination for multi-span pedestrian bridges

The potential benefits of combining the elegance of the stress ribbon concept with the robustness and speed of construction of the FlexiArch is discussed. In combination, multi-span pedestrian/cycle bridges which are innovative, highly durable and have optimal full life cycle costs can be produced with lengths of over 100 m. As the stress ribbon system is well known, the main emphasis of this paper will be on the FlexiArch. Since 1900 few arch bridges have been built, but with the development of the innovative FlexiArch this trend can be reversed as they can be installed rapidly, are cost competitive, have all the attributes of masonry arches and are very sustainable. Thus the FlexiArch represents a very attractive alternative to heavily reinforced cast in situ arches currently used in combination with stress ribbon deck systems.

A multi-objective sensitivity approach to training providers' evaluation and quota allocation planning

The practice of solely relying on the human resources department in the selection process of external training providers has cast doubts and mistrust across other departments as to how trainers are sourced. There are no measurable criteria used by human resource personnel, since most decisions are based on intuitive experience and subjective market knowledge. The present problem focuses on outsourcing of private training programs that are partly government funded, which has been facing accountability challenges. Due to the unavailability of a scientific decision-making approach in this context, a 12-step algorithm is proposed and tested in a Japanese multinational company. The model allows the decision makers to revise their criteria expectations, in turn witnessing the change of the training providers' quota distribution. Finally, this multi-objective sensitivity analysis provides a forward-looking approach to training needs planning and aids decision makers in their sourcing strategy.

Multi-Party Trust Computation in Decentralized Environments

In this paper, we describe a decentralized privacy-preserving protocol for securely casting trust ratings in distributed reputation systems. Our protocol allows n participants to cast their votes in a way that preserves the privacy of individual values against both internal and external attacks. The protocol is coupled with an extensive theoretical analysis in which we formally prove that our protocol is resistant to collusion against as many as n-1 corrupted nodes in the semi-honest model. The behavior of our protocol is tested in a real P2P network by measuring its communication delay and processing overhead. The experimental results uncover the advantages of our protocol over previous works in the area; without sacrificing security, our decentralized protocol is shown to be almost one order of magnitude faster than the previous best protocol for providing anonymous feedback.

Cast-net fishery on northern portion of Lake Victoria and upper Victoria Nile

This project survey on cost-net was conducted at the Northern portion of Lake Victoria and Upper Victoria Nile. The selected fish -Landing sites, where sampling exercises were carried out include: Loco, Jinja pier (covering Lake Victoria) and Railway bridge, New bridge and Kalange (covering upper Victoria Nile). Research was focused on the cast-net design, target commercial fish stocks, impact of cast-net on the fish stocks, mesh-size and techniques ofcast-netting. The research results show that cast-net fishery destroys fish breeding and nursery grounds and other fish ecosystem. The gear targets Oreochromis niloticus and Occassional by catches e.g. Lates niloticus, Mormyrus Kannume Bagrus docmak and Clarias gariepinus. The multi-panel cast-net of mesh-sizes ranging from i (5lmm) to 6' (152mm) were adaptable by fishermen but they mostly caught immature fish. Nevertheless, this gear showed highest efficiency compared to other gears used at the project area. These research results will be useful to researchers, extension workers and Fishenes, students under taking special research or study on this gear.

Experiences with an Object-Oriented, Multi-Stage Language

Metaphor is a multi-stage programming language extension to an imperative, object-oriented language in the style of C# or Java. This paper discusses some issues we faced when applying multi-stage language design concepts to an imperative base language and run-time environment. The issues range from dealing with pervasive references and open code to garbage collection and implementing cross-stage persistence.