Blindness as a complication of monobloc frontofacial advancement with distraction

The monobloc frontofacial osteotomy provides aesthetic and functional improvement in the treatment of various craniofacial deformities. This procedure, through highly complex, has had some significant associated complication, such as cerebrospinal fluid leakage, hematoma, infection, and bone resorption. Distraction has been successfully used to gradually elongate bone and soft tissue. This method seems to provide improved results over conventional surgery, with less morbidity. We present a case of a patient with Apert syndrome who underwent monobloc advancement using the Rigid External Device (RED) device and who developed a transient bilateral amaurosis on the fourth postoperative day before distraction. A second procedure was performed to push back the frontal bandeau, maintaining the device in position. The blindness was resolved with this procedure as well as treatment with systemic steroids. The distraction was started thereafter, and the desired improvement was acquired. To our knowledge, this is the first case of transient bilateral amaurosis in a patient undergoing monobloc distraction.

Palpebral fissure changes after monobloc frontofacial advancement in faciocraniosynostosis

There is virtually no literature on the effect of correction of syndromal faciocraniosynostosis with monobloc advancement on the palpebral fissure shape. Using image processing software, we measured the effect of monobloc advancement on the position of the upper and lower eyelids as well as the palpebral fissure slant in a series of 18 patients with syndromal faciocraniosynostosis who had undergone surgery for correction of orbital and midface hypoplasia. For both eyed of each patient, 3 variables were measured on the pre- and postoperative photographs: the linear distances between the upper and lower eyelid margins, the pupil center and the angle between the inner and outer canthi. The globe protrusion was also measured on axial computed tomography scans before and after surgery. The results indicate that the exorbitism reduction induced by monobloc advancement is accompanied by a diminution of the distance between both eyelids and the pupil center. However, the downward slant of the palpebral fissure is increased after surgery. The data suggest that the lower and upper eyelid retraction seen preoperatively in the majority of patients with faciocraniosynostosis tend to be corrected when the frontofacial region is advanced by the monobloc. On the other hand, the surgery tends to lower the outer canthus, increasing the negative slant of the fissure. The postoperative changes induced by the frontofacial monobloc advancement need to be taken into account when the surgery is going to be performed.

Comparison of vibration and rolling noise emission of resilient and solid monobloc railway wheels in underground lines

Flat or worn wheels rolling on rough or corrugated tracks can provoke airborne noise and ground-borne vibration, which can be a serious concern for nearby neighbours of urban rail transit lines. Among the various treatments used to reduce vibration and noise, resilient wheels play an important role. In conventional resilient wheels, a slightly prestressed V­shaped rubber ring is mounted between the steel wheel centre and tyre. The elastic layer enhances rolling noise and vibration suppression, as well as impact reduction on the track. In this paper the effectiveness of resilient wheels in underground lines, in comparison to monobloc ones, is assessed. The analysed resilient wheel is able to carry greater loads than standard resilient wheels used for light vehicles. It also presents a greater radial resiliency and a higher axial stiffness than conventional V­wheels. The finite element method was used in this study. A quarter car model was defined, in which the wheelset was modelled as an elastic body. Several simulations were performed in order to assess the vibrational behaviour of elastic wheels, including modal, harmonic and random vibration analysis, the latter allowing the introduction of realistic vertical track irregularities, as well as the influence of the running speed. Due to numerical problems some simplifications were needed. Parametric variations were also performed, in which the sensitivity of the whole system to variations of rubber prestress and Poisson’s ratio of the elastic material was assessed.Results are presented in the frequency domain, showing a better performance of the resilient wheels for frequencies over 200 Hz. This result reveals the ability of the analyzed design to mitigate rolling noise, but not structural vibrations, which are primarily found in the lower frequency range.

Taux sanguins et sériques d'ions métalliques chez les patients porteurs de PHTs à col modulaire - une étude de cohorte prospective comparative

Les évidences s'accumulent concernant des problèmes de corrosion touchant les prothèses à col modulaires. Plusieurs études récentes révèlent des taux d'ions métalliques élevés. Le but de cette étude était de comparer les taux d'ions métalliques (Co, Cr, Mo, Ti), dans le sérum, chez des porteurs de prothèses à col modulaire, à tige monobloc, ainsi que sans implant. Méthodes Nous avons recruté 60 patients, dont 50 porteurs d'une PTH, unilatérale, sans aucun autre implant, non-cimentée, avec tête en céramique, à minimum 1 année postopératoire. Quarante avaient une tige SPS (Symbios) (Ti6Al4 V) modulaire (col en CoCr) et 10 une SPS monobloc (non-modulaire). Les cupules étaient toutes en alliage de Ti (Ti6Al4 V) avec insert céramique ou PE. Nous avons constitué un groupe témoin sans aucun implant. Dans le groupe o modulaires O, le col a été choisi en préopératoire sur la base d'une planification 3D et assemblé à sec avant implantation. Nous avons prélevé un échantillon sérique, un autre sanguin, qui ont été analysés par spectrométrie de masse, permettant une détermination atomique quantitative. Le résultat clinique a été estimé à l'aide du o Oxford Hip Score O. Résultats Nous avons trouvé un Co sérique moyen à 1,54 Ig L dans le groupe O modulaires O et à 0,32 Ig L dans le groupe o monobloc O avec un p < 0,001. Pour le Cr, on a 1,12 Ig L (modulaires) vs 0,60 Ig L (monoblocs) avec un p < 0,001, pour le Ti 31 Ig L (modulaires) vs 22 Ig L (monoblocs) avec p < 0,001 et pour le Mo, 0,96 Ig L (modulaires) vs 0,74 (monoblocs) avec p = 0,254. Deux patients avaient des valeurs de Co supérieures à 7 Ig L et 11 étaient au-dessus de 1 Ig L, valeur considérée comme limite. Les valeurs dans le sang complet étaient similaires. Nous n'avons pas trouvé de différence significative selon les types de col modulaires (longs vs courts et rétro vs normaux). Curieusement, le taux de Cr était significativement plus élevé chez les patients sans aucun implant que chez les porteurs de SPS monobloc, par contre les différences n'étaient pas significatives pour les autres éléments. Conclusion Les taux sériques et sanguins de ions Co, Cr et Ti étaient significativement plus élevés dans le groupe des patients avec col modulaire, avec 2 valeurs 40 extrêmement hautes et plus de la moitié (11 40) anormalement hautes. Bien que ces valeurs soient inférieures à celles d'autres études, nous avons arrêter d'utiliser de tiges à cols modulaires, et avons initié un suivi annuel des patients porteurs, similaire à celui instauré pour les grosses têtes métal-métal.

FM127: Systemic metal ion levels in patients with modular neck total hip arthroplasties: a prospective cohort study

There is increasing evidence that modular neck stems are prone to corrosion-related complications. Recent studies showed elevated metal ions levels and occasional pseudotumor formation in patients with such implants. The purpose of this study was to compare systemic metal-ion levels in patients after primary THA with modular neck stems to those of patients after non-modular implants. To our knowledge, this is the first cohort study including a control group, THA without CoCr heads and dry-assembled neck-stem connections. Methods: 50 patients after THA at a minimum follow-up of 1 year have been selected for the study. Patients with multiple prosthesis or other implants have been deselected. All received a cementless SPS stem from Symbios (Ti6Al4V). 40 patients have the modular neck (CoCr) version and 10 a monobloc version. All bearings were either ceramic-ceramic or ceramic-polyethylene to minimize other sources of CoCr ion release. In the modular group, the neck was chosen pre-operatively based on a 3D planning, allowing for a dry assembly of the stem and neck on the back table before implantation. A plasma system coupled to mass spectrometry was used for a complete elementary quantification in blood and serum separately. Clinical outcome was measured using the Oxford Hip Score. Results : Complete data sets of 29 patients (24 in the modular neck-group (10male, mean age 63y, 35-84y) and 5 in the monobloc-group (3 male, 69 y, 51-83y) are available to date. Mean Co blood levels were .95 ug/L (.14-12.4) in the modular group vs .27 ug/L (.10-.73) in the monobloc group (p=.2). Respective values for Cr were significantly higher in the modular group (.99 g/L; range .75-1.21) compared to those in the monobloc group (.74 g/L ;.62-.86; p=.001). No significant difference was found when comparing serum levels. 5/24 patients had Co levels above 1 g/L (12/24 for Cr), which is by some considered as a relevant elevation. The maximum Co level was measured in an asymptomatic patient. The Oxford Hip Scores were similar in both groups. Conclusion: Cr levels were significantly elevated in the modular neck group compared to those in the monobloc group. 1/24 patients with a modular prosthesis exhibited Co levels, which are beyond the threshold accepted even for metal-on-metal bearing couples. These results have contributed to our decision to abandon the use of modular neck stems. Routine follow-up including annual measurements of systemic CoCr concentrations should be considered.

Análise da qualidade de adesão de diferentes bases de braquetes metálicos

Diante das diferenças existentes nas características das bases dos braquetes usados atualmente, objetivou-se neste trabalho comparar entre si três tipos de bases de braquetes metálicos (Monobloc, Equilibrium e Dynalock). Foram utilizados 36 pré-molares humanos, divididos em 3 grupos de 12 dentes. Os dentes foram incluídos em troquéis com gesso pedra tipo IV e posicionados com suas faces vestibulares perpendiculares à base do troquel. Todos os braquetes foram colados com o compósito Concise Ortodôntico e submetidos ao ensaio de cisalhamento em uma Máquina Universal com uma velocidade de 0,5 mm por minuto. O braquete Monobloc obteve o maior valor médio de resistência adesiva (x = 28,19 Kgf/cm²), sendo superior estatisticamente aos braquetes Equilibrium (x = 18,07 Kgf/cm²) e Dynalock (x = 18,24 Kgf/cm²). em relação ao ARI (Índice de Remanescente Resinoso), não foi encontrada diferença estatística entre os braquetes testados.

Estudo da densidade óptica e da resistência à flexão de três pontos em corpos-de-prova fundidos com a liga metálica High Bond (Co-Cr), com secções vertical 90°, diagonal 45° e diagonal 22,5°, soldados pelas técnicas convencional e TIG

Pós-graduação em Odontologia - FOA

CAD/CAM fabrication accuracy of long- vs. short-span implant-supported FDPs

OBJECTIVE To compare the precision of fit of long-span vs. short-span implant-supported screw-retained fixed dental prostheses (FDPs) made from computer-aided-design/computer-aided-manufactured (CAD/CAM) titanium and veneered with ceramic. The null hypothesis was that there is no difference in the vertical microgap between long-span and short-span FDPs. MATERIALS AND METHODS CAD/CAM titanium frameworks for an implant-supported maxillary FDP on implants with a flat platform were fabricated on one single master cast. Group A consisted of six 10-unit FDPs connected to six implants (FDI positions 15, 13, 11, 21, 23, 25) and group B of six 5-unit FDPs (three implants, FDI positions 21, 23, 25). The CAD/CAM system from Biodenta Swiss AG (Berneck, Switzerland) was used for digitizing (laser scanner) the master cast and anatomical CAD of each framework separately. The frameworks were milled (CAM) from a titanium grade V monobloc and veneered with porcelain. Median vertical distance between implant and FDP platforms from the non-tightened implants (one-screw test on implant 25) was calculated from mesial, buccal, and distal scanning electron microscope measurements. RESULTS All measurements showed values <40 μm. Total median vertical microgaps were 23 μm (range 2-38 μm) for group A and 7 μm (4-24 μm) for group B. The difference between the groups was statistically significant at implant 21 (P = 0.002; 97.5% CI -27.3 to -4.9) and insignificant at implant 23 (P = 0.093; -3.9 to 1.0). CONCLUSIONS CAD/CAM fabrication including laboratory scanning and porcelain firing was highly precise and reproducible for all long- and short-span FDPs. While all FDPs showed clinically acceptable values, the short-span FDPs were statistically more precise at the 5-unit span distance.