Estudo de modelos composicionais de óleo na injeção contínua de vapor

The objective of the thermal recovery is to heat the resevoir and the oil in it to increase its recovery. In the Potiguar river basin there are located several heavy oil reservoirs whose primary recovery energy provides us with a little oil flow, which makes these reservoirs great candidates for application of a method of recovery advanced of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and mobility improved towards the producing wells. Another possible mechanism of displacement of oil in reservoirs subjected to continuous injection of steam is the distillation of oil by steam, which at high temperatures; their lighter fractions can be vaporized by changing the composition of the oil produced, of the oil residual or to shatter in the amount of oil produced. In this context, this paper aims to study the influence of compositional models in the continuous injection of steam through in the analysis of some parameters such as flow injection steam and temperature of injection. Were made various leading comparative analysis taking the various models of fluid, varying from a good elementary, with 03 pseudocomponents to a modeling of fluids with increasing numbers of pseudocomponents. A commercial numerical simulator was used for the study from a homogeneous reservoir model with similar features to those found in northeastern Brazil. Some conclusions as the increasing of the simulation time with increasing number of pseudocomponents, the significant influence of flow injection on cumulative production of oil and little influence of the number of pseudocomponents in the flows and cumulative production of oil were found

Estudo de modelos composicionais de óleo na injeção contínua de vapor

The objective of the thermal recovery is to heat the resevoir and the oil in it to increase its recovery. In the Potiguar river basin there are located several heavy oil reservoirs whose primary recovery energy provides us with a little oil flow, which makes these reservoirs great candidates for application of a method of recovery advanced of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and mobility improved towards the producing wells. Another possible mechanism of displacement of oil in reservoirs subjected to continuous injection of steam is the distillation of oil by steam, which at high temperatures; their lighter fractions can be vaporized by changing the composition of the oil produced, of the oil residual or to shatter in the amount of oil produced. In this context, this paper aims to study the influence of compositional models in the continuous injection of steam through in the analysis of some parameters such as flow injection steam and temperature of injection. Were made various leading comparative analysis taking the various models of fluid, varying from a good elementary, with 03 pseudocomponents to a modeling of fluids with increasing numbers of pseudocomponents. A commercial numerical simulator was used for the study from a homogeneous reservoir model with similar features to those found in northeastern Brazil. Some conclusions as the increasing of the simulation time with increasing number of pseudocomponents, the significant influence of flow injection on cumulative production of oil and little influence of the number of pseudocomponents in the flows and cumulative production of oil were found

Modelagem e simulação da decomposição térmica do óleo mineral isolante aplicadas à classificação de defeitos em transformadores de potência

A análise de gases dissolvidos tem sido aplicada há décadas como a principal técnica de manutenção preditiva para diagnosticar defeitos incipientes em transformadores de potência, tendo em vista que a decomposição do óleo mineral isolante produz gases que permanecem dissolvidos na fase líquida. Entretanto, apesar da importância desta técnica, os métodos de diagnóstico mais conhecidos são baseados em constatações de modelos termodinâmicos e composicionais simplificados para a decomposição térmica do óleo mineral isolante, em conjunto com dados empíricos. Os resultados de simulação obtidos a partir desses modelos não reproduzem satisfatoriamente os dados empíricos. Este trabalho propõe um modelo termodinâmico flexível aprimorado para mimetizar o efeito da cinética de formação de sólidos como restrição ao equilíbrio e seleciona, entre quatro modelos composicionais, aquele que apresenta o melhor desempenho na simulação da decomposição térmica do óleo mineral isolante. Os resultados de simulação obtidos a partir do modelo proposto apresentaram uma melhor adequação a dados empíricos do que aqueles obtidos a partir dos modelos clássicos. O modelo propostofoi, ainda, aplicado ao desenvolvimento de um método de diagnóstico com base fenomenológica.Os desempenhos desta nova proposta fenomenológica e de métodos clássicos de diagnóstico por análise de gases dissolvidos foram comparados e discutidos; o método proposto alcançou desempenho superior a vários métodos usualmente empregados nessa área do conhecimento. E, ainda, um procedimento geral para a aplicação do novo método de diagnóstico é descrito

Estudo de sistemas multicomponentes no processo de injeção cíclica de vapor

In Brazilian Northeast there are reservoirs with heavy oil, which use steam flooding as a recovery method. This process allows to reduce oil viscosity, increasing its mobility and consequently its oil recovery. Steam injection is a thermal method and can occurs in continues or cyclic form. Cyclic steam stimulation (CSS) can be repeated several times. Each cycle consisting of three stages: steam injection, soaking time and production phase. CSS becomes less efficient with an increase of number of cycles. Thus, this work aims to study the influence of compositional models in cyclic steam injection and the effects of some parameters, such like: flow injection, steam quality and temperature of steam injected, analyzing the influence of pseudocomponents numbers on oil rate, cumulative oil, oil recovery and simulation time. In the situations analyzed was compared the model of fluid of three phases and three components known as Blackoil . Simulations were done using commercial software (CMG), it was analyzed a homogeneous reservoir with characteristics similar to those found in Brazilian Northeast. It was observed that an increase of components number, increase the time spent in simulation. As for analyzed parameters, it appears that the steam rate, and steam quality has influence on cumulative oil and oil recovery. The number of components did not a lot influenced on oil recovery, however it has influenced on gas production

Chiquinha Gonzaga e o Maxixe

Pós-graduação em Música - IA

Estudo de sistemas multicomponentes no processo de injeção cíclica de vapor

In Brazilian Northeast there are reservoirs with heavy oil, which use steam flooding as a recovery method. This process allows to reduce oil viscosity, increasing its mobility and consequently its oil recovery. Steam injection is a thermal method and can occurs in continues or cyclic form. Cyclic steam stimulation (CSS) can be repeated several times. Each cycle consisting of three stages: steam injection, soaking time and production phase. CSS becomes less efficient with an increase of number of cycles. Thus, this work aims to study the influence of compositional models in cyclic steam injection and the effects of some parameters, such like: flow injection, steam quality and temperature of steam injected, analyzing the influence of pseudocomponents numbers on oil rate, cumulative oil, oil recovery and simulation time. In the situations analyzed was compared the model of fluid of three phases and three components known as Blackoil . Simulations were done using commercial software (CMG), it was analyzed a homogeneous reservoir with characteristics similar to those found in Brazilian Northeast. It was observed that an increase of components number, increase the time spent in simulation. As for analyzed parameters, it appears that the steam rate, and steam quality has influence on cumulative oil and oil recovery. The number of components did not a lot influenced on oil recovery, however it has influenced on gas production

Stravinsky neoclássico: uma análise dos procedimentos composicionais

Pós-graduação em Música - IA

Música e ultramontanismo: possíveis significados para as opções composicionais nas missas de Fúrio Franceschini

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise Bayesiana de dados composicionais na presença de covariáveis

Pós-graduação em Matematica Aplicada e Computacional - FCT

Hacia la aldea virtual : evolución de las tecnologías comunicativas y de los modelos antropológicos

Estudiar los medios de comunicación significa estudiar al hombre, la sociedad en la que vive, su evolución y las perspectivas de desarrollo futuro. Después de haber puntualizado brevemente los avances tecnológicos salientes en la historia del hombre y de haber identificado las características más relevantes de las diversas redefiniciones antropológicas que siguieron a la introducción de algunos nuevos medios, nos detendremos principalmente en el estudio de las peculiaridades de los instrumentos de comunicación de masa más modernos, de la fotografía al cine, de la televisión a Internet. El objetivo principal de este aporte, lejos de querer proveer sistemas teóricos definitivos, es trazar un conjunto coherente de temáticas capaces de suscitar nuevas y proficuas cuestiones y de promover un debate abierto a los más diversos aportes, con particular atención a los avances de las comunicaciones telemáticas.

La moral y los modelos de optimización económica : una reflexión acerca de la antropología en la teoría económica neoclásica

Resumen: Luego de la crisis financiera global de 2008, el blindaje conceptual del paradigma neoclásico, edificado sobre un atractivo formalismo matemático, ha dejado entrever sus falencias. En ese contexto, este artículo plantea la necesidad de revisar sus fundamentos, en especial la concepción antropológica y la metodología que subyace detrás del modelo. El autor analiza al mainstream como un modelo reduccionista de la naturaleza humana, y postula la necesidad de modificar el rumbo de la ciencia económica hacia una dirección personalista, enfocada en el bienestar social de las personas, que considere la importancia de la moral en la toma de decisiones. Asimismo, el economista debería desarrollar su trabajo desde una perspectiva reflexiva y de diálogo con el resto de las ciencias sociales.

Evaluar la erosión hídrica mediante el uso de diferentes modelos de prediccion en San José de los Remates

El área experimental está ubicada en el departamento de Boaco, municipio de San José de los Remate, finca La Primavera cuya ubicación es latitud norte 12°36'43" y longitud oeste 85° 44'07". El objetivo del presente estudio es determinar los factores de la RUSLE Y USLE durante la estación lluviosa del 2008, bajo diferentes sistemas de cubierta vegetal (Grama natural y Bosque nativo). Se estableció un experimento en bloques, con tres repeticiones y dos tratamientos. Cada parcela tiene una dimensión de 50 metros de largo y 15 metros de ancho para un área útil de 750 m2 con un área total por tratamiento de 2,250 m2. El estudio demuestra que las mayores pérdidas de suelo se dieron en las parcelas de Grama natural con un valor promedio de 0.229 t/ha y en las parcelas de Bosque nativo resultaron con pérdidas menores con 0.033t/ha. Además las pérdidas de suelos en todos los eventos fueron relativamente bajas en comparación a los niveles de tolerancia propuestos por Wischmeier y Smith, 1965-1978. Se utilizo la Ecuación Universal de Pérdida de Suelo (E.U.P.S) el cual está compuesta por un total de 6 parámetro como R = 516.48. MJmm/ha h, K = 0.34-0.63 t.ha.h/ha MJ mm, S = 1.6, L = 4.27 (USLE), L*S (0.34–0.39) (RUSLE), C = Grama natural 0.01 y Bosque nativo 0.001, P = no se asumió por no existir práctica.Para el análisis de la información; se utilizó como método estadístico T student con un grado de significancia del 95 % los efectos de las diferentes variables relacionada a los procesos de erosión del suelo y del escurrimiento superficial resultando no significativos entre modelos.

Modelos cortesanos y modelos litúrgicos en la corte alfonsí : la performance cantada de las Cantigas de Santa María (CSM)

Integran este número de la revista ponencias presentadas en Studia Hispanica Medievalia VIII: Actas de las IX Jornadas Internacionales de Literatura Española Medieval, 2008, y de Homenaje al Quinto Centenario de Amadis de Gaula.

El resurgimiento actual del debate sobre los modelos comparados de capitalismo

Resumen: A partir de la crisis financiera y económica internacional, ha caido la visión del mundo unipolar (basada en la interpretación extrema del libre mercado) para dar lugar al retorno de la intervención del Estado en la economía, en un mundo multipolar en donde se da la competencia de modelos nacionales o socio-culturales de capitalismo. Este trabajo analiza los límites que presenta este sistema de capitalismo estado, y lo contrasta con La Economía Social de Mercado como sistema de ordenamiento de la economía. Este es un sistema que requiere la presencia de un marco institucional sólido que la regule y está focalizado en la equidad y la autosuperación de las personas. Se busca así analizar el funcionamiento de estos sistemas en el marco que les dio origen y analizar su efectividad y su crecimiento en el mundo en los últimos años. Finalmente, se emplea el análisis de estas teorías para el caso latinoamericano.