水稻幼苗脱黄化过程以及灌浆期茎的蛋白质组学研究

水稻既是我国三大粮食作物之一，又是基因组学研究的模式材料，在生产实践和科学研究中都占有极其重要的地位。基因组学研究取得的巨大成就以前所未有的深度和广度推动了生命科学各个研究领域的飞速发展。水稻基因组的破译是水稻科学研究的重要里程碑，同时也宣告了功能基因组学时代的到来。蛋白质组学是研究细胞内全部蛋白质的动态表达及其相互关系的新兴学科，是功能基因组学研究的重要组成部分和战略制高点。 本论文采用高分辨率的蛋白质双向电泳分离技术和高通量的蛋白质质谱分析技术以及生物信息学等手段，开展水稻灌浆期茎蛋白质组表达模式和水稻幼苗脱黄化过程的比较蛋白质组学研究，探讨茎生长发育规律和水稻应答光信号相关蛋白质及其网络调控机制，是学科前沿与实际应用的有机结合，在科研和生产实践中都具有重要的意义。 首先，分别构建了灌浆期水稻顶端茎段和水稻黄化幼苗的蛋白质组表达谱。并对其中185个目的蛋白点进行了MALDI-TOF/MS分析和数据库检索鉴定。共有149个蛋白质得到了鉴定，蛋白质鉴定的成功率为80.5％。这些被鉴定的蛋白质分属118个基因的表达产物，根据它们功能可以分为13种不同的类别，其中绝大多数为能量产生和代谢以及抗性相关的蛋白质。 在水稻灌浆期顶端茎段表达的蛋白质中，与能量和物质代谢相关的蛋白质例如ATPase、磷酸丙糖异构酶，6－磷酸葡萄糖异构酶等占有很高比例，说明茎段组织中具有很强的代谢活动。与生长发育相关的蛋白质包括beta-tubulins、无机焦磷酸酶（inorganic pyrophosphatase）、液泡质子ATP酶（vacuolar proton-ATPase）以及UDP葡萄糖焦磷酸酶等的大量累积，显示出顶端茎段细胞分裂和生长迅速;同时，贮存多糖和结构多糖也在旺盛合成。G蛋白、GDP释放抑制因子等信号传导蛋白以及苯丙氨酸氨解酶、谷胱苷肽S转移酶（glutathione S-transferase，GST）、抗坏血酸过氧化酶（ascorbate peroxidase，APX）以及超氧化物歧化酶（superoxide dismutase，SOD）等抗性相关蛋白质在该时期丰度表达，表明在灌浆期水稻顶端茎段能够迅速感受并传递外界信号，从而使得其在遭受胁迫时能够立刻启动抗逆防御系统，最大限度地降低不利环境对种子发育的影响。 在黑暗中萌发和生长的水稻黄化幼苗随着光照时间（0~24小时）的延长，能通过双向电泳后检测到的蛋白质逐渐变少，24小时后趋于稳定，相当于正常光照条件下生长的水稻幼苗蛋白质组表达谱。进一步分析表明，在黄化苗中，分解代谢及能量产生相关的蛋白如丙糖磷酸异构酶、琥珀酰辅酶A连接酶、异戊酰辅酶A脱氢酶与ATPase等的表达量比较丰富;另外，还可能启动了脂肪酸的α氧化分解途径，以供黑暗中生长所需的物质和能量。当黄化幼苗光照后，与光合作用及物质合成相关的一些蛋白质表达量增加，而那些分解代谢相关酶类则有所下降。同时，鸟核苷酸结合蛋白β亚基类似蛋白、20S proteasome以及Bowman Birk trypsin inhibitor等信号传递及抗性相关蛋白随着光照时间的延长而减少，说明黑暗胁迫条件下水稻幼苗启动了相关的抗逆途径。叶绿素合成途径中的蛋白酶胆色素原脱氨基酶和金属鳌合酶在脱黄化过程中表达量有所下降，可能是因为叶绿素合成产物具有反馈抑制作用。 本研究首次利用蛋白质组学方法来解析水稻灌浆期茎蛋白质组表达模式和水稻黄化幼苗响应光因子的蛋白质组变化情况，鉴定了一些有价值的蛋白质，并得到了它们的表达特点和相关数据，为更好地理解水稻顶端茎秆的生长特点和功效、水稻应答黑暗胁迫和光形态建成以及光合作用机理等提供了分子证据。

Use of Biotechnology to increase the content of bioactive compounds in fermented foods of plant origin

The objectives of this PhD research were: i) to evaluate the use of bread making process to increase the content of β-glucans, resistant starch, fructans, dietary fibers and phenolic compounds of kamut khorasan and wheat breads made with flours obtained from kernels at different maturation stage (at milky stage and fully ripe) and ii) to study the impact of whole grains consumption in the human gut. The fermentation and the stages of kernel development or maturation had a great impact on the amount of resistant starch, fructans and β-glucans as well as their interactions resulted highly statistically significant. The amount of fructans was high in kamut bread (2.1g/100g) at the fully ripe stage compared to wheat during industrial fermentation (baker’s yeast). The sourdough increases the content of polyphenols more than industrial fermentation especially in bread made by flour at milky stage. From the analysis of volatile compounds it resulted that the sensors of electronic nose perceived more aromatic compound in kamut products, as well as the SPME-GC-MS, thus we can assume that kamut is more aromatic than wheat, so using it in sourdough process can be a successful approach to improve the bread taste and flavor. The determination of whole grain biormakers such as alkylresorcinols and others using FIE-MS AND GC-tof-MS is a valuable alternative for further metabolic investigations. The decrease of N-acetyl-glucosamine and 3-methyl-hexanedioic acid in kamut faecal samples suggests that kamut can have a role in modulating mucus production/degradation or even gut inflammation. This work gives a new approach to the innovation strategies in bakery functional foods, that can help to choose the right or best combination between stages of kernel maturation-fermentation process and baking temperature.

In Situ Observation of the Thermal Decomposition of Weddelite by Heating Stage Environmental Scanning Electron Microscopy

The morphological and chemical changes occurring during the thermal decomposition of weddelite, CaC2O4·2H2O, have been followed in real time in a heating stage attached to an Environmental Scanning Electron Microscope operating at a pressure of 2 Torr, with a heating rate of 10 °C/min and an equilibration time of approximately 10 min. The dehydration step around 120 °C and the loss of CO around 425 °C do not involve changes in morphology, but changes in the composition were observed. The final reaction of CaCO3 to CaO while evolving CO2 around 600 °C involved the formation of chains of very small oxide particles pseudomorphic to the original oxalate crystals. The change in chemical composition could only be observed after cooling the sample to 350 °C because of the effects of thermal radiation.

Experiences with an Object-Oriented, Multi-Stage Language

Metaphor is a multi-stage programming language extension to an imperative, object-oriented language in the style of C# or Java. This paper discusses some issues we faced when applying multi-stage language design concepts to an imperative base language and run-time environment. The issues range from dealing with pervasive references and open code to garbage collection and implementing cross-stage persistence.

Particle and gaseous emissions from commercial aircraft at each stage of the landing and takeoff cycle

A novel technique was used to measure emission factors for commonly used commercial aircraft including a range of Boeing and Airbus airframes under real world conditions. Engine exhaust emission factors for particles in terms of particle number and mass (PM2.5), along with those for CO2, and NOx were measured for over 280 individual aircraft during the various modes of landing/takeoff (LTO) cycle. Results from this study show that particle number, and NOx emission factors are dependant on aircraft engine thrust level. Minimum and maximum emissions factors for particle number, PM2.5, and NOx emissions were found to be in the range of 4.16×1015-5.42×1016 kg-1, 0.03-0.72 g.kg-1, and 3.25-37.94 g.kg-1 respectively for all measured airframes and LTO cycle modes. Number size distributions of emitted particles for the naturally diluted aircraft plumes in each mode of LTO cycle showed that particles were predominantly in the range of 4 to 100 nm in diameter in all cases. In general, size distributions exhibit similar modality during all phases of the LTO cycle. A very distinct nucleation mode was observed in all particle size distributions, except for taxiing and landing of A320 aircraft. Accumulation modes were also observed in all particle size distributions. Analysis of aircraft engine emissions during LTO cycle showed that aircraft thrust level is considerably higher during taxiing than idling suggesting that International Civil Aviation Organization (ICAO) standards need to be modified as the thrust levels for taxi and idle are considered to be the same (7% of total thrust) [1].

User-designer collaboration during the early stage of the product development process

As an understanding of users' tacit knowledge and latent needs embedded in user experience has played a critical role in product development, users’ direct involvement in design has become a necessary part of the design process. Various ways of accessing users' tacit knowledge and latent needs have been explored in the field of user-centred design, participatory design, and design for experiencing. User-designer collaboration has been used unconsciously by traditional designers to facilitate the transfer of users' tacit knowledge and to elicit new knowledge. However, what makes user-designer collaboration an effective strategy has rarely been reported on or explored. Therefore, interaction patterns between the users and the designers in three industry-supported user involvement cases were studied. In order to develop a coding system, collaboration was defined as a set of coordinated and joint problem solving activities, measured by the elicitation of new knowledge from collaboration. The analysis of interaction patterns in the user involvement cases revealed that allowing users to challenge or modify their contextual experiences facilitates the transfer of knowledge and new knowledge generation. It was concluded that users can be more effectively integrated into the product development process by employing collaboration strategies to intensify the depth of user involvement.

The impact of perceived stage of cancer on carers’ anxiety and depression during the patients’ final year of life

Objective: This paper explores the effects of perceived stage of cancer (PSOC) on carers' anxiety and depression during the patients' final year. Methods: A consecutive sample of patients and carers (N=98) were surveyed at regular intervals regarding PSOC, and anxiety and depression using the Hospital Anxiety and Depression Scale. Means were compared by gender using the Mann-Whitney U-test. The chi-square was used to analyse categorical data. Agreement between carers' and patients' PSOC was estimated using kappa statistics. Correlations between carers' PSOC and their anxiety and depression were calculated using the Spearman's rank correlation. Results: Over time, an increasing proportion of carers reported that the cancer was advanced, culminating at 43% near death. Agreement regarding PSOC was fair (kappa=0.29-0.34) until near death (kappa=0.21). Carers' anxiety increased over the year; depression increased in the final 6 months. Females were more anxious (p=0.049, 6 months; p=0.009, 3 months) than males, and more depressed until 1 month to death. The proportion of carers reporting moderate-severe anxiety almost doubled over the year to 27%, with more females in this category at 6 months (p=0.05). Carers with moderate-severe depression increased from 6 to 15% over the year. Increased PSOC was weakly correlated with increased anxiety and depression. Conclusions: Carers' anxiety exceeded depression in severity during advanced cancer. Females generally experienced greater anxiety and depression. Carers were more realistic than patients regarding the ultimate outcome, which was reflected in their declining mental health, particularly near the end.

Parametric building development during early design stage

Objectives The objectives of this project were two-fold: • Assess the ease with which current architectural CAD systems supported the use ofparametric descriptions in defining building shape, engineering system performance and cost at the early stages of building design; • Assess the feasibility of implementing a software decision support system that allowed designers to trade-off the characteristics and configuration of various engineering systems to move towards a “global optimum” rather than considering each system in isolation and expecting humans to weigh up all of the costs and benefits. The first stage of the project consisted of using four different CAD systems to define building shells (envelopes) with different usages. These models were then exported into a shared database using the IFC information exchange specifications. The second stage involved the implementation of small computer programs that were able to estimate relevant system parameters based on performance requirements and the constraints imposed by the other systems. These are presented in a unified user interface that extracts the appropriate building shape parameters from the shared database Note that the term parametric in this context refers to the relationships among and between all elements of the building model - not just geometric associations - which will enable the desired coordination.

Final report: stage 1 : results

This research project aims to improve economic, social and environmental sustainability of the pre-cast concrete and construction and demolition waste supply chains through the development, trial and evaluation of an innovative supply chain management strategy. The long-term goals are to improve competitive behaviour and market sector performance and improve business process efficiency and effectiveness of public sector program delivery by influencing policy development, changing organisational behaviour and implementation development to achieve more economic, social and environmental sustainable markets.

Building for competitive advantage in early stage start-ups : the role of entrepreneurial capabilities

Recent theoretical work has suggested “entrepreneurial capabilities” themselves may provide the resource foundations to deliver competitive advantage for entrepreneurial firms. This paper empirically examines how start-ups use such entrepreneurial capabilities to build competitive advantage. We investigate the effects of technological and marketing expertise, knowledge of market trends, flexibility and networking on the ability to obtain a cost leadership or differentiation advantage. Using a large dataset of 1,108 start-ups obtained after random sampling of over 30,193 households, we find that differentiation strategies benefit from most resource advantages. Cost leadership strategies, however, seem only to benefit from technological expertise and flexibility and not related to market-based advantages. By doing so, this study contributes to both entrepreneurship and RBV-theories by showing how entrepreneurial capabilities lead to competitive advantages in nascent and early-stage start-ups.