Litoestratigrafia e deformação cenzóica na região de Icapuí, Ceará, e implicações para a estruturação de campos de petróleo na borda ocidental da bacia Potiguar(NE do Brasil)

This thesis deals with the sedimentological/stratigraphic and structural evolution of the sedimentary rocks that occur in the NW continental border of the Potiguar Basin. These rocks are well exposed along coastal cliffs between the localities of Lagoa do Mato and Icapuí, Ceará State (NE Brazil). The sedimentological/stratigraphic study involved, at the outcrop scale, detailed facies descriptions, profile mapping of the vertical succession of different beds, and columnar sections displaying inferred lateral relationships. The approach was complemented by granulometric and petrographic analyses, including the characterization of heavy mineral assemblages. The data set allowed to recognize two kinds of lithological units, a carbonate one of very restricted occurrence at the base of the cliffs, and three younger, distinct siliciclastic units, that predominate along the cliffs, in vertical and lateral extent. The carbonate rocks were correlated to the late Cretaceous Jandaíra Formation, which is covered by the siliciclastic Barreiras Formation. The Barreiras Formation occurs in two distinct structural settings, the usual one with nondeformed, subhorizontal strata, or as tilted beds, affected by strong deformation. Two lithofacies were recognized, vertically arranged or in fault contacts. The lower facies is characterized by silty-argillaceous sandstones with low-angle cross bedding; the upper facies comprises medium to coarse grained sandstones, with conglomeratic layers. The Tibau Formation (medium to coarse-grained sandstones with argillite intercalations) occurs at the NW side of the studied area, laterally interlayered with the Barreiras Formation. Eolic sediments correlated to the Potengi Formation overly the former units, either displaying an angular unconformity, or simply an erosional contact (stratigraphic unconformity). Outstanding structural features, identified in the Barreiras Formation, led to characterize a neocenozoic stress field, which generated faults and folds and/or reactivated older structures in the subjacent late cretaceous (to paleogene, in the offshore basin) section. The structures recognized in the Barreiras Formation comprise two distinct assemblages, namely a main extensional deformation between the localities of Ponta Grossa and Redonda, and a contractional style (succeeded by oblique extensional structures) at Vila Nova. In the first case, the structural assemblage is dominated by N-S (N±20°Az) steep to gently-dipping extensional faults, displaying a domino-style or listric geometry with associated roll-over structures. This deformation pattern is explained by an E-W/WNW extension, contemporaneous with deposition of the upper facies of the Barreiras Formation, during the time interval Miocene to Pleistocene. Strong rotation of blocks and faults generated low-angle distensional faults and, locally, subvertical bedding, allowing to estimate very high strain states, with extension estimates varying between 40% up to 200%. Numerous detachment zones, parallel to bedding, help to acommodate this intense deformation. The detachment surfaces and a large number of faults display mesoscopic features analoguous to the ones of ductile shear zones, with development of S-C fabrics, shear bands, sigmoidal clasts and others, pointing to a hydroplastic deformation regime in these cases. Local occurrences of the Jandaíra limestone are controled by extensional faults that exhume the pre-Barreiras section, including an earlier event with N-S extension. Finally, WNWtrending extensional shear zones and faults are compatible with the Holocene stress field along the present continental margin. In the Vila Nova region, close to Icapuí, gentle normal folds with fold hinges shallowly pluging to SSW affect the lower facies of the Barreiras Formation, displaying an incipient dissolution cleavage associated with an extension lineation at high rake (a S>L fabric). Deposition of the upper facies siliciclastics is controlled by pull-apart graben structures, bordered by N-NE-trending sinistral-normal shear zones and faults, characterizing an structural inversion. Microstructures are compatible with tectonic deformation of the sedimentary pile, burried at shallow depths. The observed features point to high pore fluid pressures during deformation of the sediments, producing hydroplastic structures through mechanisms of granular flow. Such structures are overprinted by microfractures and microfaults (an essentially brittle regime), tracking the change to microfracturing and frictional shear mechanisms accompanying progressive dewatering and sediment lithification. Correlation of the structures observed at the surface with those present at depth was tested through geophysical data (Ground Penetrating Radar, seismics and a magnetic map). EW and NE-trending lineaments are observed in the magnetic map. The seismic sections display several examples of positive flower structures which affect the base of the cretaceous sediments; at higher stratigraphic levels, normal components/slips are compatible with the negative structural inversion characterized at the surface. Such correlations assisted in proposing a structural model compatible with the regional tectonic framework. The strong neogenepleistocene deformation is necessarily propagated in the subsurface, affecting the late cretaceous section (Açu and Jandaíra formations), wich host the hydrocarbon reservoirs in this portion of the Potiguar Basin. The proposed structural model is related to the dextral transcurrent/transform deformation along the Equatorial Margin, associated with transpressive terminations of E-W fault zones, or at their intersections with NE-trending lineaments, such as the Ponta Grossa-Fazenda Belém one (the LPGFB, itself controlled by a Brasiliano-age strike-slip shear zone). In a first step (and possibly during the late Cretaceous to Paleogene), this lineament was activated under a sinistral transpressional regime (antithetic to the main dextral deformation in the E-W zones), giving way to the folds in the lower facies of the Barreiras Formation, as well as the positive flower structures mapped through the seismic sections, at depth. This stage was succeeded (or was penecontemporaneous) by the extensional structures related to a (also sinistral) transtensional movement stage, associated to volcanism (Macau, Messejana) and thermal doming processes during the Neogene-Pleistocene time interval. This structural model has direct implications to hydrocarbon exploration and exploitation activities at this sector of the Potiguar Basin and its offshore continuation. The structure of the reservoirs at depth (Açu Formation sandstones of the post-rift section) may be controlled (or at least, strongly influenced) by the deformation geometry and kinematics characterized at the surface. In addition, the deformation event recognized in the Barreiras Formation has an age close to the one postulated for the oil maturation and migration in the basin, between the Oligocene to the Miocene. In this way, the described structural cenario represents a valid model to understand the conditions of hydrocarbon transport and acummulation through space openings, trap formation and destruction. This model is potentially applicable to the NW region of the Potiguar Basin and other sectors with a similar structural setting, along the brazilian Equatorial Atlantic Margin

A zona de contato entre as formações Motuca e Sambaíba, Permo-Triássico da bacia do Parnaíba, regiões de Filadélfia (TO), Riachão (MA) e Loreto (MA)

O intervalo que compreende o final do Paleozóico e início do Mesozóico foi marcado por mudanças globais paleogeográficas e paleoclimáticas, em parte atribuídas a eventos catastróficos. A intensa continentalização do supercontinente Pangéia, com a implantação de extensos desertos, sucedeu os ambientes costeiros-plataformais do início do Permiano. Os registros desses eventos no norte do Brasil são encontrados nas bacias intracratônicas, particularmente na Bacia do Parnaíba, representados pela zona de contato entre as formações Motuca e Sambaíba. A Formação Motuca é constituída predominantemente por pelitos vermelhos laminados com lentes de gipsita, calcita e marga. Na porção leste da Bacia do Parnaíba, as fácies da Formação Motuca tornam-se mais arenosas com a ocorrência expressiva de arenitos com estratificação cruzada sigmoidal. A Formação Sambaíba consiste em arenitos de coloração creme alaranjada com estratificação plano-paralela e estratificação cruzada de médio a grande porte. Em geral, o contato entre as unidades é brusco, representado pela passagem de arenitos finos com laminação cruzada cavalgante e acamamento flaser/wavy da Formação Motuca para arenitos médios com falhas/microfalhas sinsedimentares e laminações convolutas da Formação Sambaíba. Foram individualizadas 14 fácies sedimentares, agrupadas em quatro associações: AF1 – Lacustre raso / Planície de lama (mudflat), AF2 – “Panela” salina (saline pan), AF3 – Lençol de areia e AF4 – Campo de dunas. A AF1 foi depositada dominantemente por processos de decantação em um extenso ambiente lacustre raso de baixa energia, influenciado por influxos esporádicos de areias oriundos de rios efêmeros. Este sistema lacustre foi, provavelmente, influenciado por períodos de contração e expansão, devido às variações das condições climáticas predominantemente áridas. Os mais expressivos períodos de contração ocorreram na porção oeste da Bacia do Parnaíba, representados pelo desenvolvimento de planícies de lama (mudflats) associadas a lagoas efêmeras saturadas em carbonatos e a “panelas” salinas (saline pans- AF2). Os lençóis de areia (AF3) são planícies arenosas extensas, localmente com área úmidas, intensamente retrabalhadas por processos eólicos. A AF4 é interpretada como parte de um erg composto por dunas/draas em zona saturada em areia, com interdunas secas subordinadas. Intervalos deformados lateralmente contínuos por centenas de quilômetros ocorrem na zona de contato entre as formações Motuca e Sambaíba. Pelitos com camadas contorcidas e brechadas (Formação Motuca) e arenitos com falhas/microfalhas sinsedimentares, laminação convoluta e diques de injeção preenchidos por argilitos (Formação Sambaíba) são interpretados como sismitos induzidos por terremotos de alta magnitude (>8 na escala Ritcher). Anomalias geoquímicas de elementos traços como Mn, Cr, Co, Cu e Ni na zona de contato entre as formações, juntamente com a presença de micropartículas de composição metálica na matriz argilosa dos sismitos, corroboram com impactos de meteoritos no limite c, possivelmente do astroblema Riachão.

Reconstituição paleoambiental das formações Motuca e Sambaíba, Permo-Triássico da Bacia do Parnaíba no sudoeste do Estado do Maranhão, Brasil

O intervalo que compreende o final do Paleozoico e início do Mesozoico foi marcado por mudanças globais paleogeográficas e paleoclimáticas, em parte atribuídas a eventos catastróficos. A intensa continentalização do supercontinente Pangeia, com a implantação de extensos desertos, sucedeu os ambientes costeiro-plataformais do início do Permiano. Os registros desses eventos no norte do Brasil são encontrados nas bacias intracratônicas, particularmente na sucessão Permotriássica da Bacia do Parnaíba. A análise de fácies e estratigráfica de afloramentos desta sucessão permitiu a individualização de 14 fácies sedimentares agrupadas em 4 associações de fácies (AF): AF1 e AF2, relacionadas aos depósitos da Formação Motuca, e AF3 e AF4, representativas da base da Formação Sambaíba. A AF1 - Lacustre raso/Mudflat consiste em pelitos vermelhos laminados com lentes de gipsita, calcita e marga, além de lobos de arenitos sigmoidais. A AF2 - Saline pan é constituída por corpos lenticulares de gipso laminado, gipso nodular e gipsarenito, sobrepostos por pelitos esverdeados com nódulos de dolomita e palygorskita. A AF3 - Lençol de areia e AF4 - Campo de dunas são formadas, respectivamente, por arenitos de coloração creme alaranjada com estratificação plano-paralela e estratificação cruzada de médio a grande porte. Destaca-se o registro de intervalos deformados lateralmente contínuos por centenas de quilômetros na zona de contato entre as formações Motuca e Sambaíba. Nestes, ocorrem pelitos com camadas contorcidas e brechadas (Formação Motuca) e arenitos com falhas/microfalhas sinsedimentares, laminação convoluta e diques de injeção preenchidos por argilitos (Formação Sambaíba), interpretados como sismitos induzidos por terremotos de alta magnitude (> 8 na escala Richter).

Sediments of Lake Vens (SW European Alps, France) record large-magnitude earthquake events

We studied sediment cores from Lake Vens (2,327 m asl), in the Tinée Valley of the SW Alps, to test the paleoseismic archive potential of the lake sediments in this particularly earthquake-sensitive area. The historical earthquake catalogue shows that moderate to strong earthquakes, with intensities of IX–X, have impacted the Southern Alps during the last millennium. Sedimentological (X-ray images, grain size distribution) and geochemical (major elements and organic matter) analyses show that Lake Vens sediments consist of a terrigenous, silty material (minerals and organic matter) sourced from the watershed and diatom frustules. A combination of X-ray images, grain-size distribution, major elements and magnetic properties shows the presence of six homogenite-type deposits interbedded in the sedimentary background. These sedimentological features are ascribed to sediment reworking and grain sorting caused by earthquake-generated seiches. The presence of microfaults that cross-cut the sediment supports the hypothesis of seismic deposits in this system. A preliminary sediment chronology is provided by 210Pb measurement and AMS 14C ages. According to the chronology, the most recent homogenite events are attributable to damaging historic earthquakes in AD 1887 (Ligure) and 1564 (Roquebillière). Hence, the Lake Vens sediment recorded large-magnitude earthquakes in the region and permits a preliminary estimate of recurrence time for such events of ~400 years.

Prominent deformation features and interpretation of sediment core CRP-2/2A (Table 1)

Sediment deformation features in CRP-2/2A were described during normal logging procedures and from core-scan images. In this paper the origin of soft-sediment folding, contorted bedding, microfaulting, clastic dykes, shear zones and intraformational breccias is discussed. The features have a stratigraphic distribution related to major unconformities and sequence boundaries. Hypotheses for the origins of sediment deformation include hydrofracturing, subglacial shearing, slumping, and gas hydrate formation. Shear zones, microfaults, clastic dykes and contorted bedding within rapidly deposited sediments, suggest that slumping in an ice-distal environment occurred in the early Oligocene. A till wedge beneath a diamictite at 364 mbsf the mid-Oligocene section represents the oldest evidence of grounded ice in CRP-2/2A. Shear zones with a subglacial origin in the early late Oligocene and early Miocene sections of the core are evidence of further grounding events. The interpretation of sediment deformation in CRP-2/2A is compared to other Antarctic stratigraphic records and global eustatic change between the late Eocenel/early Oligocene and the middle Miocene.

Structural features in ODP Holes 128-794D and 128-799B

Numerous structural features occur in the Leg 128 cores from the Japan Sea. They include (1) gravity-induced structures such as slump folds, (2) dewatering structures comprising several sets of veins, and (3) larger faults and veins developed in the volcanic basement of the Yamato Basin as well as in the sedimentary rocks of the Oki Ridge and Kita-Yamato Trough. Gravity-induced structures, mainly slumps and associated faults, suggest the existence of paleoslopes and the dominance of gravitational tectonics during the early and middle Miocene, at the Pliocene/Pleistocene boundary, and during the Quaternary. Several types of mud-filled veins having various shapes were observed. These are especially abundant in the middle Miocene siliceous claystones and porcellanites from the Kita-Yamato Trough. They have been interpreted as dewatering conduits that formed preferentially in highly porous, water-saturated diatomaceous muds on a slope, because of episodic loss of sediment strength, collapse of the sediment framework, and consequent fluid migration. The central part of the vein serves once as a fluid conduit, whereas the transition between conduit-controlled and intergranular flow occurs at the branching extremities, with concentration of fines. The likely trigger responsible for the strength loss is seismic activity. Development of these veins, spatially and chronologically linked to small normal microfaults, implies an extensional regime having layer-parallel extension and a local bedding-parallel shear couple, probably the result of gravitational gliding. The brittle fractures found in Yamato Basin basement Hole 794D cores comprise joints, faults, and veins filled with chlorite-saponite, saponite, and calcite. They suggest a likely transpressive to transtensional regime around the early Miocene/ middle Miocene boundary, with a north-northeast-south-southwest compression alternating with a west-northwest-eastsoutheast extension. The faults from Site 799 cores on the Yamato Rise exhibit a prominent early Miocene-middle Miocene extensional environment, a late Miocene-early Pliocene phase of normal and strike-slip faulting, and a final phase that began during the latest Pliocene. Site 798, on the Oki Ridge, reveals faults that recorded a consistent extensional tectonic regime from Pliocene to the Holocene. These data support the pull-apart kinematic model for early Miocene-middle Miocene time, as regarding the stress regime deduced from the Yamato Basin basement fractures. The recent compression known in the eastern margin of the Japan Sea was not documented by compressive structures at any site. The late Miocene-early Pliocene faulting phase corresponds to a major and general reorganization of the stress distribution in the arc area. Evidence for rapid and main subsidence and synsedimentary extension of the Yamato Basin and Yamato Rise areas between 20 and 15 Ma, and the concomitant rotation of southwest Japan, raise the question of links between this opening and the Shimanto Belt collision in southwest Japan, between the arc and the Philippine Sea Plate.