Lithofacies, chronostratigraphy, minerals and diagenetic silica facies at DSDP Leg 80 Holes

X-ray powder diffraction and optical and scanning-electron microscope analyses of sediment samples taken from four sites drilled in the Goban Spur area of the northeast Atlantic show variable diagenetic silicification of sediments at several stratigraphic horizons. The results are as follows: 1. The silicified sediments are middle Eocene at Site 548, Paleocene to lower Albian at Site 549, upper to lower Paleocene at Site 550, and lower Turanian at Site 551. 2. There are three types of these silicified sediments: nodular type in carbonate-rich host sediments, bedded type in clayey host sediments, and a type transitional between the other two. 3. Silica diagenesis is considered to progress as follows: dissolution of siliceous fossils; precipitation of opal CT in pore spaces and transformation of biogenic silica (opal A) to opal CT, development of opal CT cement; chalcedonic quartz precipitation in pore spaces and replacement of foraminiferal tests by chalcedonic quartz; and finally, transformation of opal CT to quartz, and cementation. But the strong influence of host-sediment types on diagenetic silica fades is recognized. Bedded-type silicified sediments in a clayey environment indicate a lower grade of silica diagenesis. Only very weak chalcedonic quartz formation is recognized, and there is no opal CT cementation, even in Lower Cretaceous bedded-type clayey silicified sediments. 4. The rf(101) spacing of opal CT shows two distinct trends of ordering or decrease with burial depth; one is a rapid change, in the case of nodular silicified sediments, and the other is a more gentle shift, found in bedded silicified sediments. 5. Diagenetic silica facies of the nodular type develop as irregular concentric zones around some nodule nuclei. Also, quartz-chert nodule formation occurs at rather shallower horizons, and is discordant with the trend of decreasing d(101) spacing in opal CT. 6. Silicified sediments at Site 551 are shallower than at the other sites. The diagenetic silica facies suggest the probable erosion of 300 m or more of sediment at this site. 7. The zeolites clinoptilolite and phillipsite were found in the sediment samples recovered on Leg 80. Clinoptilolite occurs from the shallower levels to the deepest horizons of diagenetically silicified zones, suggesting that clinoptilolite formation is related to diagenesis of biogenic silica. Phillipsite at Site 551 (Section 551-5-2) may originate from volcanogenie material.

(Table 1) Lithofacies interpretation and distribution in sediment core CRP-3

Seven hundred and nineteen samples from throughout the Cainozoic section in CRP-3 were analysed by a Malvern Mastersizes laser particle analyser, in order to derive a stratigraphic distribution of grain-size parameters downhole. Entropy analysis of these data (using the method of Woolfe & Michibayashi, 1995) allowed recognition of four groups of samples, each group characterised by a distinctive grain-size distribution. Group 1, which shows a multi-modal distribution, corresponds to mudrocks, interbedded mudrock/sandstone facies, muddy sandstones and diamictites. Group 2, with a sand-grade mode but showing wide dispersion of particle size, corresponds to muddy sandstones, a few cleaner sandstones and some conglomerates. Group 3 and Group 4 are also sand-dominated, with better grain-size sorting, and correspond to clean, well-washed sandstones of varying mean grain-size (medium and fine modes, respectively). The downhole disappearance of Group 1, and dominance of Groups 3 and 4 reflect a concomitant change from mudrock- and diamictite-rich lithology to a section dominated by clean, well-washed sandstones with minor conglomerates. Progressive downhole increases in percentage sand and principal mode also reflect these changes. Significant shifts in grain-size parameters and entropy group membership were noted across sequence boundaries and seismic reflectors, as recognised in other studies.

Description of lithofacies associations and their interpreted settings from sequences of sediment core CRP-1 (Table 2)

Cape Roberts Project drillcore 1 was obtained from Roberts Ridge, a sea-floor high located at 77°S, 16 km offshore from Cape Roberts in western McMurdo Sound, Antarctica. The recovered core is about 147 m long with the upper 43.15 metres below the sea floor (revised figure) being dated as Quarternary and the older part of the sequence being Miocene. The core includes nine facies: sandy diamict, muddy diamict, gravel/conglomerate, mud(stone), clay(stone) and carbonate. These facies occure in associations that are repeated in particulare sequences throughout the core, and are interpreted as representing different depositional environments through time. Seven lithofacies associations are interpreted as representing offshore shelf, ice protected/below wave-base; prodeltaic/offshore shelf; delta front/sandy shelf; ice system; subglacial till/rainout diamict/debris flow diamicts singly or in combination; and a carbonate-rich shelf bank. The facies associations are used to infer that the Quaternary section represents deposition on a polar shelf with perhaps two or three glacial fluctuations. The Quaternary carbonate unit indicates a period of ice sheet retreat, but local glacial activity may have increased with an increase in costal precipitation. The Miocene section represents polythermal glacial systems. The older Miocene section is glacially dominated whereas the younger section is much less so. The glacially dominated section may provide evidence for a major glacial advance thar resulted un a low stand of global eustatic sea level at that time. After the low stand, eustatic sea level was gradually rising during deposition of the younger section dominated more by non-glacial processes.

Ammonite biostratigraphy, lithofacies variations, and paleoceanographic implications for Barremian-Aptian sequences of northeastern Mexico

Two Barremian-Aptian sequences studied in Durango and Nuevo Leon States, northeastern Mexico include three lithic units which have been described as the Cupido Formation of Barremian-early Early Aptian age, its lateral equivalent, the Lower Tamaulipas Formation, and the La Peña Formation extending through the early Albian. ^ The present work improves the existing ammonite Aptian biozonation by considering constraints associated with a discontinuous spatial and temporal record of the different taxa within the La Peña Formation. ^ Four ammonite biozones are established: (1) The Dufrenoyia justinae Zone for the late Early Aptian, (2) The Burckhardtites nazasensis/Rhytidoplites robertsi Zone for the middle Aptian, (3) The Cheloniceras inconstans Zone for the early Late Aptian, and (4) The Hypacanthoplites cf. leanzae Zone for the late late Aptian. ^ Also, a detailed sedimentological analysis of the sections shed further light on the possible causes that controlled intermittent occurrences of the ammonites in relation to the prevailing paleoceanographic and paleoecologic conditions in northeastern Mexico during the late Barremian-Aptian. ^ Microfacies analyses show that the upper part of the Cupido facies are represented by biocalcirudite with rudists, biocalcarenites with oolites and algae, and rich benthonic foraminifera assemblages with ostracods. These facies are related to paleoceanographic conditions of sedimentation within a shallow-marine carbonate platform. Its lateral equivalent, deep-water facies extended to the southeast and it is represented by the Lower Tamaulipas Formation, which includes planktonic foraminifera, ostracods, and mollusk and echinoid fragments. The beginning of deposition of the La Peña Formation in the late Early Aptian is characterized by an increase in terrigenous materials and significant decrease in the abundance of benthic fauna. The La Peña Formation is recognized by an alternation of marls and shale limestones containing ammonites, planktonic foraminifera, ostracods, and radiolaria toward the top. Accumulation of the La Peña continued throughout the end of the Aptian and records changes in conditions of sedimentation and productivity in the water column, which abruptly terminated the carbonate deposition in the Cupido Platform. ^ Results of carbon/carbonate content analyses show that changes from the Cupido to the La Peña facies are also characterized by an increase of organic carbon, which indicate the onset of enhanced dysoxic/anoxic conditions in the lower water column. ^

Ammonite biostratigraphy, lithofacies variations, and paleoceanographic implications for barremian-aptian sequences of northeastern Mexico

Two Barremian-Aptian sequences studied in Durango and Nuevo Leon States, northeastern Mexico include three lithic units which have been described as the Cupido Formation of Barremian-early Early Aptian age, its lateral equivalent, the Lower Tamaulipas Formation, and the La Pena Formation extending through the early Albian. The present work improves the existing ammonite Aptian biozonation by considering constraints associated with a discontinuous spatial and temporal record of the different taxa within the La Pena Formation. Four ammonite biozones are established: 1) The Dufrenoyia justinae Zone for the late Early Aptian, 2) The Burckhardtites nazasensis/Rhytidoplites robertsi Zone for the middle Aptian, 3) The Cheloniceras inconstans Zone for the early Late Aptian, and 4) The Hypacanthoplites cf. leanzae Zone for the late late Aptian. Also, a detailed sedimentological analysis of the sections shed further light on the possible causes that controlled intermittent occurrences of the ammonites in relation to the prevailing paleoceanographic and paleoecologic conditions in northeastern Mexico during the late Barremian-Aptian. Microfacies analyses show that the upper part of the Cupido facies are represented by biocalcirudite with rudists, biocalcarenites with oolites and algae, and rich benthonic foraminifera assemblages with ostracods. These facies are related to paleoceanographic conditions of sedimentation within a shallow-marine carbonate platform. Its lateral equivalent, deep-water facies extended to the southeast and it is represented by the Lower Tamaulipas Formation, which includes planktonic foraminifera, ostracods, and mollusk and echinoid fragments. The beginning of deposition of the La Pena Formation in the late Early Aptian is characterized by an increase in terrigenous materials and significant decrease in the abundance of benthic fauna. The La Pena Formation is recognized by an alternation of marls and shale limestones containing ammonites, planktonic foraminifera, ostracods, and radiolaria toward the top. Accumulation of the La Pena continued throughout the end of the Aptian and records changes in conditions of sedimentation and productivity in the water column, which abruptly terminated the carbonate deposition in the Cupido Platform. Results of carbon/carbonate content analyses show that changes from the Cupido to the La Pena facies are also characterized by an increase of organic carbon, which indicate the onset of enhanced dysoxic/anoxic conditions in the lower water column.

Lithofacies distribution in the western Bay of Plenty, New Zealand

Sediment dynamics on a storm-dominated shelf (western Bay of Plenty, New Zealand) were mapped and analyzed using the newly developed multi-sensor benthic profiler MARUM NERIDIS III. An area of 60 km × 7 km between 2 and 35 m water depth was surveyed with this bottom-towed sled equipped with a high-resolution camera for continuous close-up seafloor photography and a CTD with connected turbidity sensor. Here we introduce our approach of using this multi-parameter dataset combined with sidescan sonography and sedimentological analyses to create detailed lithofacies and bedform distribution maps and to derive regional sediment transport patterns. For the assessment of sediment distribution, photographs were classified and their spatial distribution mapped out according to associated acoustic backscatter from a sidescan sonar. This provisional map was used to choose target locations for surficial sediment sampling and subsequent laboratory analysis of grain size distribution and mineralogical composition. Finally, photographic, granulometric and mineralogical facies were combined into a unified lithofacies map and corresponding stratigraphic model. Eight distinct types of lithofacies with seawards increasing grain size were discriminated and interpreted as reworked relict deposits overlain by post-transgressional fluvial sediments. The dominant transport processes in different water depths were identified based on type and orientation of bedforms, as well as bottom water turbidity and lithofacies distribution. Observed bedforms include subaquatic dunes, coarse sand ribbons and sorted bedforms of varying dimensions, which were interpreted as being initially formed by erosion. Under fair weather conditions, sediment is transported from the northwest towards the southeast by littoral drift. During storm events, a current from the southeast to the northweast is induced which is transporting sediment along the shore in up to 35 m water depth. Shorewards oriented cross-shore transport is taking place in up to 60 m water depth and is likewise initiated by storm events. Our study demonstrates how benthic photographic profiling delivers comprehensive compositional, structural and environmental information, which compares well with results obtained by traditional probing methods, but offers much higher spatial resolution while covering larger areas. Multi-sensor benthic profiling enhances the interpretability of acoustic seafloor mapping techniques and is a rapid and economic approach to seabed and habitat mapping especially in muddy to sandy facies.

Reconstructing the event stratigraphy from the complex structural - stratigraphic architecture of an Archaean volcanic – intrusive – sedimentary succession : the Boorara Domain, Eastern Goldfields Superterrane, Western Australia

Two main deformational phases are recognised in the Archaean Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, Yilgarn Craton, Western Australia, primarily involving southover- north thrust faulting that repeated and thickened the stratigraphy, followed by east northeast – west-southwest shortening that resulted in macroscale folding of the greenstone lithologies. The domain preserves mid-greenschist facies metamorphic grade, with an increase to lower amphibolite metamorphic grade towards the north of the region. As a result of the deformation and metamorphism, individual stratigraphic horizons are difficult to trace continuously throughout the entire domain. Volcanological and sedimentological textures and structures, primary lithological contacts, petrography and geochemistry have been used to correlate lithofacies between faultbounded structural blocks. The correlated stratigraphic sequence for the Boorara Domain comprises quartzo-feldspathic turbidite packages, overlain by high-Mg tholeiitic basalt (lower basalt), coherent and clastic dacite facies, intrusive and extrusive komatiite units, an overlying komatiitic basalt unit (upper basalt), and at the stratigraphic top of the sequence, volcaniclastic quartz-rich turbidites. Reconstruction of the stratigraphy and consideration of emplacement dynamics has allowed reconstruction of the emplacement history and setting of the preserved sequence. This involves a felsic, mafic and ultramafic magmatic system emplaced as high-level intrusions, with localised emergent volcanic centres, into a submarine basin in which active sedimentation was occurring.