Factors affecting tightness of package

Työn tarkoituksena oli tutkia kartonkipohjaisten pakkausmateriaalien läpäisyominaisuuksia sekä pakkausten tiiveyteen vaikuttavia tekijöitä. Työssä verrattiin skaivatun ja skaivaamattoman raakareunan sekä tölkkien pohjaratkaisujen ominaisuuksia vesihöyryn- ja hapen läpäisevyydessä, kun käytetty kartonki oli molemmin puolin polymeeripäällystetty. Tiiveysominaisuuksia tutkittiin myös vuotomittauksin, värjäyksin ja elektronimikroskoopilla. Kuivan elintarvikkeen säilytystestillä ja kilpailijapakkausanalyyseillä oli tarkoituksena myös saada selville eri pakkausmateriaalien ja pakkauksien läpäisevyys- ja tiiveysominaisuuksia. Pakkauksen saumoilla oli yhtä suuri tai suurempi vaikutus vesihöyryn läpäisyssä kuin itse materiaalilla, kun pakkaus oli molemmin puolin polymeeripäällystetty kartonkikuppi. Skaivatun sauman vesihöyrynläpäisy oli vain 4-10 % pienempi kuin raakareunallisen sauman. Pakkauksen ulkopuolisten raakareunojen suojaaminen pienensi vesihöyrynläpäisevyyttä 30 %. Kun pakkauksen sisäpuolen raaka-reuna oli suojattu teipillä, saumoilla ei ollut niin suurta vaikutusta vesihöyryn läpäisyyn verrattuna materiaaliin. Raakareunan määrällä tölkin pohjassa tai pienillä vuodoilla tölkin saumoissa ei ollut merkitystä vesihöyryn läpäisyyn. Hapenläpäisyssä oli tärkeää ehyt barrierkerros. Polymeerisen barrierkerroksen reiät ja sauman skaivaus vaikuttivat enemmän kuin vesihöyryn läpäisyssä. Mitä enemmän tölkin pohjassa oli raakareunaa, sitä suurempi oli sen hapenläpäisy. Pakkauksen konvertointi, koneen säädöt ja lämmön kohdistus, ovat saattaneet aiheuttaa värjäyksellä havaitut barrierkerroksen mikroreiät. Kaupalliset kuiva-ainepakkaukset sisälsivät pääasiassa alumiinilaminaatin vesihöyryn, hapen ja valon suojana, kun tuotteena oli maitojauhetta ja rasvaa sisältävä elintarvike. Kuitenkin, jos pakkausmateriaali sisälsi vain ohuen sumutetun alumiinikerroksen, sen barrieriominaisuus ei ollut yhtä hyvä kuin alumiinilaminaatin. Äidinmaidonkorvikkeen säilytystestissä seurattiin eri analyysein tuotteen laatua kolmen kuukauden säilytyksen ajan. Pakkauksen vesihöyryn läpäisyominaisuus osoittautui tärkeimmäksi, sillä kosteuden vaikutus tuotteen laadun heikkenemisessä oli suurin. Hapen vaikutus on myös olennainen ja siten hyvä hapenestokerros sekä tiiveys ovat myös tärkeitä pakkauksen ominaisuuksia.

Cleaning of ceramic filter plates

In this thesis, cleaning of ceramic filter plates clogged by iron oxides was studied. Oxalic acid is considered as the most effective cleaning agent for the plates fouled by iron oxides, but when using oxalic acid, sparingly soluble calcium oxalate may be formed and it can blind the filter media. Suitability of another chemical for cleaning the plates clogged by iron oxides was studied in this thesis. The literature part was mostly about the properties of the chemical, about its reactions, industrial uses, safety issues etc. In the experimental part, the efficiency of the chemical for cleaning of the ceramic plates clogged by iron oxides was studied. Two kinds of plates were used in the experiments; the others were clogged by hematite and the others by magnetite. Both soaking and flow-through experiments were done. A suitable concentration, pH and temperature were tried to find in the experiments. Also the effect of ultrasound was studied. The efficiency of the cleaning was examined by measuring the permeability of the plates during the experiments. ICP-OES analysis was performed for determining the amount of dissolved iron in the washing solution. Some experiments were also done with oxalic acid. The results from the oxalic acid experiments were compared to the results from the experiments with the other chemical. In the experiments with the other chemical, the permeability increased more and the amounts of dissolved iron were larger. According to the results from the experiments, the method of application of the washing solutions had an impact on the washing results.

Surface Modification of Ceramics

Ceramics are widely used in industrial applications due to their advantageous thermal and mechanical stability. Corrosion of ceramics is a great problem resulting in significant costs. Coating is one method of reducing adversities of corrosion. There are several different thin film deposition processes available such as sol-gel, Physical and Chemical Vapour Deposition (PVD and CVD). One of the CVD processes, called Atomic Layer Deposition (ALD) stands out for its excellent controllability, accuracy and wide process capability. The most commonly mentioned disadvantage of this method is its slowness which is partly compensated by its capability of processing large areas at once. Several factors affect the ALD process. Such factors include temperature, the grade of precursors, pulse-purge times and flux of precursors as well as the substrate used. Wrongly chosen process factors may cause loss of self-limiting growth and thus, non-uniformities in the deposited film. Porous substrates require longer pulse times than flat surfaces. The goal of this thesis was to examine the effects of ALD films on surface properties of a porous ceramic material. The analyses applied were for permeability, bubble point pressure and isoelectric point. In addition, effects of the films on corrosion resistance of the substrate in aqueous environment were investigated. After being exposured to different corrosive media the ceramics and liquid samples collected were analysed both mechanically and chemically. Visual and contentual differences between the exposed and coated ceramics versus the untreated and uncoated ones were analysed by scanning electron microscope. Two ALD film materials, dialuminium trioxide and titanium dioxide were deposited on the ceramic substrate using different pulse times. The results of both film materials indicated that surface properties of the ceramic material can be modified to some extent by the ALD method. The effect of the titanium oxide film on the corrosion resistance of the ceramic samples was observed to be fairly small regardless of the pulse time.

Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.