Influence Of Successive Light-activation On Degree Of Conversion And Knoop Hardness Of The First Layered Composite Increment.

To evaluate the influence of light-activation of second, third and fourth increments on degree of conversion (DC) and microhardness (KHN) of the top (T) and bottom (B) surface of the first increment. Forty samples (n = 5) were prepared. In groups 1-4, after each increment light-activation (multiple irradiation), T and B of the first increment were measured in DC and KHN. In groups 5-8, only the first increment was made (single irradiation) and measurements of DC and KHN were taken at 15 min intervals. The light-activation modes were (XL) 500 mW/cm(2) × 38 s (G1/G5); (S) 1000 mW/cm(2) × 19 s (G2/G6), (HP) 1400 mW/cm(2) × 14 s (G3/G7); (PE) 3200 mW/cm(2) × 6 s (G4/G8). Data for DC and KHN were analyzed separately by using PROC MIXED for repeated measures and Tukey-Kramer test (α = 0.05). For KHN, B showed lower values than T. PE resulted in lower values of KHN in B surface. For single and multiple irradiations, T and B of first measurement showed the lowest KHN and the fourth measurement showed the highest, with significant difference between them. For single irradiation, first and second increments presented similar KHN, different from the third and fourth increment, which did not differ between them. For multiple irradiations, the second light-activation resulted in KHN similar to first, third and fourth increments. For DC, except QTH, T presented higher DC than B. The light-activation of successive increments was not able to influence the KHN and DC of the first increment.

Tree-ring formation, radial increment periodicity, and phenology of tree species from a seasonal semi-deciduous forest in southeast Brazil

Many tropical tree species produce growth rings in response to seasonal environmental factors that influence the activity of the vascular cambium. We applied the following methods to analyze the annual nature of treering formation of 24 tree species from a seasonal semi-deciduous forest of southeast Brazil: describing wood anatomy and phenology, counting tree rings after cambium markings, and using permanent dendrometer bands. After 7 years of systematic observations and measurements, we found the following: the trees lost their leaves during the dry season and grew new leaves at the end of the same season; trunk increment dynamics corresponded to seasonal changes in precipitation, with higher increment (active period) during the rainy season (October-April) and lower increment (dormant period) during the dry season (May-September); the number of tree rings formed after injuries to the cambium coincided with the number of years since the extraction of the wood samples. As a result of these observations, it was concluded that most study trees formed one growth ring per year. This suggests that tree species from the seasonal semi-deciduous forests of Brazil have an annual cycle of wood formation. Therefore, these trees have potential for use in future studies of tree age and radial growth rates, as well as to infer ecological and regional climatic conditions. These future studies can provide important information for the management and conservation of these endangered forests.

Estratègies per a l'increment del Russeting en pera Conference

La qualitat del fruit és un concepte multidisciplinari i complex de determinar amb claredat i precisió degut a que intervenen factors lligats a la varietat, al mercat, al consumidor final o factors de seguretat agroalimentària. En el cas de poma Golden, la fruita de primera categoria està definida per criteris com calibre de més de 70 mm i sense russeting, malgrat això hi ha mercats del nord d’Espanya que aprecien més la presencia de russeting. Un altre exemple seria el cas de préssec o nectarina, es considera com a criteri de qualitat la coloració homogènia i vermella-fosca, però al mercat nacional s’aprecien els calibres grans, mentre que certs mercats europeus prefereixen els calibres més petits. En el cas de pera Conference hi ha una sèrie de criteris que la seva importància ve condicionada pel mercat o pel consumidor, com són el calibre, la forma, el color de la pell o el russeting. De tots aquests factors, probablement la presencia de russeting sigui un dels criteris que està més estès en la majoria dels mercats o consumidors que coneixen la pera Conference, la qual cosa implica la necessitat de produir Conference amb russeting. Des del punt de vista comercial el russeting presenta una altre avantatge com es una major rusticitat de la pell, la qual cosa redueix els problemes de manipulació i les pèrdues degudes a l’escaldat que apareix quan la fruita està a l’expositor dels supermercats. El russeting és una alteració de l’epidermis dels fruits, degut a la cicatrització de petites lesions que es produeixen a les primeres etapes de la formació dels fruits. L’aparició s’afavoreix per humitats altes i temperatures baixes durant les primeres setmanes posteriors a la floració. Els anys que no es donen aquestes condicions es fa necessari realitzar tractaments amb productes que afavoreixen l’aparició del russeting. L’objectiu d’aquest estudi es determinar quines son els productes i el calendari d’aplicació més eficaces per afavorir l’aparició de russeting en pera Conference, així com el seu efecte sobre els paràmetres productius.

L'increment del turisme mèdic. Cada cop més persones recorren a la sanitat d'altres països per tractar-se

Una de les indústries que ha augmentat més espectacularment el seu desenvolupament ha estat la mèdico-farmaceutica gràcies als descobriments científics i a l'aplicació de nous tractaments.

Modelling the effect of temperature on height increment of Scots pine at high latitudes

Abstract

In vitro evaluation of the temperature increment at the external root surface after Er,Cr: YSGG laser irradiation of the root canal

Objectives: A study was made to determine the temperature increment at the dental root surface following Er,Cr:YSGG laser irradiation of the root canal. Design. Human canines and incisors previously instrumented to K file number ISO 30 were used. Irradiation was carried out with glass fiber endodontic tips measuring 200 μm in diameter and especially designed for insertion in the root canal. The teeth were irradiated at 1 and 2 W for 30 seconds, without water spraying or air, and applying a continuous circular movement (approximately 2 mm/sec.) in the apico-coronal direction. Results: At the 1 W power setting, the mean temperature increment was 3.84ºC versus 5.01ºC at 2 W. In all cases the difference in mean value obtained after irradiation versus the mean baseline temperature proved statistically significant (p< 0.05). Conclusions: Application of the Er,Cr:YSGG laser gives rise to a statistically significant temperature increment at the external root surface, though this increment is probably clinically irrelevant, since it would appear to damage the tissues (periodontal ligament and alveolar bone) in proximity to the treated tooth

Thermal increment due to ErCr: YSGG and CO2 laser irradiation of different implant surfaces. A pilot study

Objective: An evaluation and comparison is made of the thermal increment at different implant surfaces during irradiation with CO2 and ErCr:YSGG lasers. Study design: Five threaded and impacted implants with four types of surfaces were inserted in an adult pig rib: two implants with a hydroxyapatite surface (HA)(impacted and threaded, respectively), a machined titanium surface implant (TI mach), a titanium plasma spray surface implant (TPS), and a sandblasted, acid-etched surface implant (SBAE). A 0.5-mm diameter bone defect was made in the implant apical zone, and a type-K thermocouple (Termopar)® was placed in contact with the implant. The implants were irradiated in the coronal zone of each implant with a CO2 (4 W continuous mode) and an ErCr:YSGG laser (1.5 W, pulsed mode) first without and then with refrigeration. The temperature variations at the implant apical surface were recorded. Results: An apical temperature increase was recorded in all cases during CO2 and ErCr:YSGG laser irradiation without refrigeration. However, when the ErCr:YSGG was used with a water spray, a decrease in temperature was observed in all implants. The acid-etched and sandblasted surfaces were those most affected by the thermal changes. Conclusions: The ErCr:YSGG laser with a water spray applied to the sealing cap or coronal zone of the implants does not generate thermal increments in the apical surface capable of adversely affecting osseointegration and the integrity of the peri-implant bone tissue

L'increment demogràfic afecte la salut genètica

Un estudi publicat a 'Science' demostra que l'augment exponencial de la població del planeta també té conseqüències mèdiques, ja que fa créixer el risc de patir malalties rares

Increment 1 PP

powerpoint presentation, if you want to have a look at it go ahead, make comments/add stuff!

SEG Deliverable 4: Application Increment 3

This is the specification for the 4th deliverable of the Agile Software Engineering Group Project. The 4th deliverable is code increment 3 of the application built in the 3rd sprint

Supressió dels actes estereotipats i increment del joc espontani en deficients profunds. 'Supresión de los actos estereotipados e incremento del juego espontáneo en deficientes profundos'.

Profundizar en el estudio de los comportamientos estereotipados dando una visión amplia y detallada de todo lo que se ha dicho en la literatura publicada en torno a este tipo de conducta. Examinar los efectos directos y secundarios de la sobrecorrección cuando se intentan suprimir las conductas estereotipadas. Validar el procedimiento de sobrecorrección por práctica positiva en el juego apropiado con juguetes. 2 chicos deficientes profundos, de 12 y 15 años respectivamente, que llevan un año y medio en una residencia de semana. Realiza un marco teórico en el que incluye toda la información encontrada sobre el tema deestudio. Realiza una parte experimental consistente en una réplica de un trabajo experimental utilizando un diseño intrasujeto de línea base múltiple a fin de evaluar la efectividad del procedimiento de sobrecorrección. Para obtener los datos observan los chicos en una situación experimental de juego libre a través de un espejo unidireccional. Calculan la fiabilidad y validez de las observaciones. Registran la ausencia o presencia de cuatro comportamientos sobre los cuales se administra la sobrecorrección: movimiento inapropiado de las manos, contacto inapropiado con la boca, manipulación inapropiada de objetos y otras conductas inapropiadas. Miden los efectos secundarios de la sobrecorrección por medio del grado de presencia de la conducta de juego apropiada. Tres juegos: juegos de cubo de plástico 'Conos-cefa', juegos de encajamiento y juego de pirámide. Estadística descriptiva. Cálculo de frecuencias, medias y representaciones gráficas. Se observa una reducción casi completa de los comportamientos estereotipados en los dos sujetos y la manifestación de un nuevo comportamiento adaptativo, el juego apropiado con juguetes. La persona afectada por un retardo profundo es educable: tienen unas posibilidades que es necesario potenciar. Los comportamientos estereotipados son los que influyen más a menudo en su evolución personal y en la tarea educativa, por tanto, es una cuestión primordial la de encontrar técnicas adecuadas para su tratamiento y la realización de estudios experimentales que utilicen diseños experimentales rigurosos.

A nutrient increment method for reducing bias in global biogeochemical models

Assimilation of physical variables into coupled physical/biogeochemical models poses considerable difficulties. One problem is that data assimilation can break relationships between physical and biological variables. As a consequence, biological tracers, especially nutrients, are incorrectly displaced in the vertical, resulting in unrealistic biogeochemical fields. To prevent this, we present the idea of applying an increment to the nutrient field within a data assimilating model to ensure that nutrient-potential density relationships are maintained within a water column during assimilation. After correcting the nutrients, it is assumed that other biological variables rapidly adjust to the corrected nutrient fields. We applied this method to a 17 year run of the 2° NEMO ocean-ice model coupled to the PlankTOM5 ecosystem model. Results were compared with a control with no assimilation, and with a model with physical assimilation but no nutrient increment. In the nutrient incrementing experiment, phosphate distributions were improved both at high latitudes and at the equator. At midlatitudes, assimilation generated unrealistic advective upwelling of nutrients within the boundary currents, which spread into the subtropical gyres resulting in more biased nutrient fields. This result was largely unaffected by the nutrient increment and is probably due to boundary currents being poorly resolved in a 2° model. Changes to nutrient distributions fed through into other biological parameters altering primary production, air-sea CO2 flux, and chlorophyll distributions. These secondary changes were most pronounced in the subtropical gyres and at the equator, which are more nutrient limited than high latitudes.

Kerb and urban increment of highly time-resolved trace elements in PM10, PM2.5 and PM1.0 winter aerosol in London during ClearfLo 2012

Ambient concentrations of trace elements with 2 h time resolution were measured in PM10–2.5, PM2.5–1.0 and PM1.0–0.3 size ranges at kerbside, urban background and rural sites in London during winter 2012. Samples were collected using rotating drum impactors (RDIs) and subsequently analysed with synchrotron radiation-induced X-ray fluorescence spectrometry (SR-XRF). Quantification of kerb and urban increments (defined as kerb-to-urban and urban-to-rural concentration ratios, respectively), and assessment of diurnal and weekly variability provided insight into sources governing urban air quality and the effects of urban micro-environments on human exposure. Traffic-related elements yielded the highest kerb increments, with values in the range of 10.4 to 16.6 for SW winds (3.3–6.9 for NE) observed for elements influenced by brake wear (e.g. Cu, Sb, Ba) and 5.7 to 8.2 for SW (2.6–3.0 for NE) for other traffic-related processes (e.g. Cr, Fe, Zn). Kerb increments for these elements were highest in the PM10–2.5 mass fraction, roughly twice that of the PM1.0–0.3 fraction. These elements also showed the highest urban increments (~ 3.0), although no difference was observed between brake wear and other traffic-related elements. All elements influenced by traffic exhibited higher concentrations during morning and evening rush hours, and on weekdays compared to weekends, with the strongest trends observed at the kerbside site, and additionally enhanced by winds coming directly from the road, consistent with street canyon effects. Elements related to mineral dust (e.g. Al, Si, Ca, Sr) showed significant influences from traffic-induced resuspension, as evidenced by moderate kerb (3.4–5.4 for SW, 1.7–2.3 for NE) and urban (~ 2) increments and increased concentrations during peak traffic flow. Elements related to regional transport showed no significant enhancement at kerb or urban sites, with the exception of PM10–2.5 sea salt (factor of up to 2), which may be influenced by traffic-induced resuspension of sea and/or road salt. Heavy-duty vehicles appeared to have a larger effect than passenger vehicles on the concentrations of all elements influenced by resuspension (including sea salt) and wearing processes. Trace element concentrations in London were influenced by both local and regional sources, with coarse and intermediate fractions dominated by traffic-induced resuspension and wearing processes and fine particles influenced by regional transport.