Caracterização de rearranjos cromossômicos citogeneticamente equilibrados associados a quadros clínicos

Este estudo teve como objetivos (a) identificar mecanismos pelos quais rearranjos cromossômicos citogeneticamente equilibrados possam estar associados de maneira causal a determinados quadros clínicos e (b) contribuir para a compreensão dos mecanismos de formação desses rearranjos. Para isso, foram estudados 45 rearranjos cromossômicos citogeneticamente equilibrados (29 translocações, 10 inversões e seis rearranjos complexos), detectados em pacientes que apresentavam malformações congênitas, comprometimento do desenvolvimento neuropsicomotor ou déficit intelectual. Foram 31 rearranjos cromossômicos esporádicos, três familiais que segregavam com o quadro clínico e mais 11 rearranjos cromossômicos herdados de genitores fenotipicamente normais. Inicialmente os pontos de quebra desses rearranjos foram mapeados por hibridação in situ fluorescente (FISH). A busca por microdeleções e duplicações genômicas foi realizada por a-CGH. A investigação dos pontos de quebra prosseguiu com a aplicação da técnica de Mate-Pair Sequencing (MPS), que permite localizar as quebras em segmentos de 100 pb - 1 kb, na maioria dos casos. Para obter os segmentos de junção das quebras no nível de pares de bases, os segmentos delimitados por MPS foram sequenciados pelo método de Sanger. A análise por aCGH revelou microdeleções ou microduplicações localizadas nos cromossomos rearranjados, em 12 dos 45 pacientes investigados (27%). A análise de 27 rearranjos por MPS permitiu a caracterização dos pontos de junção das quebras. MPS expandiu o número de pontos de quebra, detectados por análise do cariótipo ou aCGH, de 114 para 156 (em resolução < 2kb, na maioria dos casos). O número de pontos de quebra/rearranjo variou de 2 a 20. Os 156 pontos de quebra resultaram em 86 variantes estruturais equilibradas e outras 32 variantes não equilibradas. Perdas e ganhos de segmentos submiscroscópicos nos cromossomos rearranjados constituíram a principal causa ou, provavelmente, contribuíram para o quadro clínico de 12 dos 45 pacientes. Em cinco desses 12 rearranjos foram detectadas por MPS a interrupção de genes já relacionados à doença, ou provável alteração de sua região reguladora, contribundo para o quadro clínico. Em quatro dos 33 rearranjos não associados a perdas ou ganhos de segmentos, a análise por MPS revelou a interrupção de genes que já foram anteriormente relacionados a doenças, explicando-se, assim, as características clínicas dos portadores; outro rearranjo pode ter levando alteração da expressão gênica de gene sensível a dosagem e ao quadro clínico. Um rearranjo cromossômico familial, identificado na análise após bandamento G como uma translocação equilibrada, t(2;22)(p14;q12), segregava com quadro de atraso do desenvolvimento neuropsicomotor e dificuldade de aprendizado associados a dismorfismos. A combinação das análises por FISH, aCGH e MPS revelou que se tratava, na verdade, de rearranjo complexo entre os cromossomos 2, 5 e 22, incluindo 10 quebras. A segregação de diferentes desequilíbrios submicroscópicos em indivíduos afetados e clinicamente normais permitiu a compreensão da variabilidade clínica observada na família. Rearranjos equilibrados detectados em indivíduos afetados, mas herdados de genitores clinicamente normais, são, em geral, considerados como não tendo relação com o quadro clínico, apesar da possibilidade de desequilíbrios cromossômicos gerados por permuta desigual na meiose do genitor portador do rearranjo. Neste trabalho, a investigação de 11 desses rearranjos por aCGH não revelou perdas ou ganhos de segmentos nos cromossomos rearranjados. No entanto, a análise por aCGH da portadora de um desses rearranjos - inv(12)mat - revelou deleção de 8,7 Mb no cromossomo 8, como causa de seu fenótipo clínico. Essa deleção estava relacionada com outro rearranjo equilibrado também presente em sua mãe, independente da inversão. Para compreender os mecanismos de formação de rearranjos citogeneticamente equilibrados, investigamos os segmentos de junção no nível de pares de base. A análise por MPS que levou, na maioria dos casos, ao mapeamento dos pontos de quebras em segmentos <1kb permitiu o sequenciamento pelo método de Sanger de 51 segmentos de junções de 17 rearranjos. A ocorrência de blunt fusions ou inserções e deleções <10 pb, e a ausência de homologia ou a presença de micro homologia de 2 pb a 4 pb de extensão indicaram o mecanismo de junção de extremidades não homólogas (non-homologous end joinging; NHEJ), na maioria das 51 junções caracterizadas. As características de três dos quatro rearranjos mais complexos, com 17-20 quebras, indicaram sua formação pelo mecanismo de chromothripsis. Este estudo mostra a importância da análise genômica de variações de número de cópias por microarray, juntamente com o mapeamento dos pontos de quebra por MPS, para determinar a estrutura de rearranjos cromossômicos citogeneticamente equilibrados e seu impacto clínico. O mapeamento dos segmentos de junção por MPS, permitindo o sequenciamento pelo método de Sanger, foi essencial para a compreensão de mecanismos de formação desses rearranjos

Utvärdering av effektkartläggning med MA/SIMM : Effektkartläggning som stöd vid val av teknik för att nå önskad effekt vid utveckling av ett mobilt intranät

Kravinsamling görs inför ett systemutvecklingsprojekt för att identifiera användarnas behov och önskade effekter med systemet. Ett problem för många system är att valet av teknik påverkas allt för mycket av vilka tekniker som finns i företaget och är i många fall förutbestämt, istället för att baseras på behov och krav som ställs på systemet. Effektkartläggning är en metod som kan användas för kravinsamling, men metoden har inte fokus på tekniska funktioner. Eftersom tekniken ofta är förutbestämd måste den beaktas redan under kravinsamlingen. Frågan är därför hur man kan använda effektkartläggning för att den ändå ska vara ett stöd vid val av teknik. Syftet med det här examensarbetet har varit att utvärdera metoden effektkartläggning genom en metodanalys enligt metoden MA/SIMM, för att ta fram ett förslag på hur metoden bör användas för att vara ett stöd vid val av teknik för applikationstyp och cms för att nå önskad effekt vid utveckling av ett mobilt intranät. För att kunna besvara syftet har två frågeställningar tagits fram:  Hur bör metoden effektkartläggning användas för att vara ett stöd vid val av teknik för applikationstyp och cms för ett mobilt intranät?  Vilka faktorer bör beaktas vid val av teknik för applikationstyp och cms för att nå önskad effekt vid utveckling av ett mobilt intranät? För att identifiera faktorerna har litteraturstudier och intervjuer genomförts. Resultatet av vilka faktorer som bör beaktas vid val av teknik är en lista på 13 faktorer som grovt kan delas in i faktorer för applikationstyp och cms. Metoden effektkartläggning har analyserats utifrån ett teoretiskt och ett situationellt perspektiv. Resultatet av metodanalysen visar att systemutvecklare bör involveras tidigare i processen, metoder som säkerställer att outtalade krav dokumenteras bör användas samt tre förändringar i effektkartans notation behövs för att effektkartläggning ska vara ett stöd vid val av teknik.

Identifying, mapping, and monitoring the impact of hybrid firms

There is growing recognition that hybrid organizations can play a critical role in tackling intractable global sustainable development challenges. At the same time, acute social, environmental, and economic challenges are opening up “opportunity” spaces for hybrids. Different institutional contexts are also leading to variable hybrid forms linked to the focus of their mission and their profit-oriented status. This article presents a process for identifying, mapping, and building impact indicators based on a study of 20 hybrid organizations in Sub-Saharan Africa.

Mapping 100 years of Thornthwaite moisture index: Impact of climate change in Victoria, Australia

Geographer C. W. Thornthwaite proposed in 1948 a moisture index called Thornthwaite Moisture Index (TMI) as part of a water balance model for a new classification system for climate. The importance of TMI climatic classification has been recognised in many areas of knowledge and practice worldwide over the last 60 years. However, although past climate research was focused on developing adequate methods for climate classification, current research is more concerned with understanding the patterns of climate change. The use of TMI as an indicator for climate change is still an incipient area of research. The contributions of this paper are twofold. First, it is to fully document a methodology based on geostatistics adopted to produce a time series of TMI maps that are accurate and have high spatial resolution. The state of Victoria, in Australia, over the last century, is used as the case study. Second, by analysing these maps, the paper presents a general evaluation of the spatial patterns found in Victoria related to moisture variability across space and over time. Some potential implications of the verified moisture changes are discussed, and a number of ideas for further development are suggested. © 2014 Institute of Australian Geographers.

Disparate activation of the coronary sinus and inferior left atrium during atrial tachycardia after persistent atrial fibrillation ablation: prevalence, pitfalls, and impact on mapping

Persistent atrial fibrillation (AF) ablation may lead to partial disconnection of the coronary sinus (CS). As a result, disparate activation sequences of the local CS versus contiguous left atrium (LA) may be observed during atrial tachycardia (AT). We aimed to evaluate the prevalence of this phenomenon and its impact on activation mapping.

Mapping of the Eltanin impact area in the South-East Pacific

Two Polarstern expeditions were conducted in 1995 (ANT-XII/4) and 2001 (ANT-XVIII/5a) to the Bellingshausen Sea and Amundsen Sea and the suspected Eltanin meteorite impact in the SE-Pacific. A survey of the sediment distribution and its acoustic structure along the cruise track was performed. The seafloor topography was sampled using the multibeam sonar system Hydrosweep DS2 which operates on a frequency of 15.5 kHz. The resulting AWI Bathymetric Chart of the Eltanin Meteorite Impact Area is based on a Digital Terrain Model of this area. The mapping was performed using ArcGIS. The Eltanin impact area which covers the 4.100 m high Freden Seamount is visualized by one overview sheet of the scale 1:200,000 and four 1:100,000 subsheets.

Curriculum mapping of the Spatial Science Program, QUT : what was the cartography journey?

There are currently a number of issues of great importance affecting universities and the way in which their programs are now offered. Many issues are largely being driven top-down and impact both at a university-wide and at an individual discipline level. This paper provides a brief history of cartography and digital mapping education at the Queensland University of Technology (QUT). It also provides an overview of what is curriculum mapping and presents some interesting findings from the program review process. Further, this review process has triggered discussion and action for the review, mapping and embedding of graduate attributes within the spatial science major program. Some form of practical based learning is expected in vocationally oriented degrees that lead to professional accreditation and are generally regarded as a good learning exposure. With the restructure of academic programs across the Faculty of Built Environment and Engineering in 2006, spatial science and surveying students now undertake a formal work integrated learning unit. There is little doubt that students acquire the skills of their discipline (mapping science, spatial) by being immersed in the industry culture- learning how to process information and solve real-world problems within context. The broad theme of where geo-spatial mapping skills are embedded in this broad-based tertiary education course are examined with some focused discussion on the learning objectives, outcomes and examples of some student learning experiences

The creative sector in New Zealand : mapping and economic role : report to New Zealand Trade and Enterprise

The New Zealand creative sector was responsible for almost 121,000 jobs at the time of the 2006 Census (6.3% of total employment). These are divided between • 35,751 creative specialists – persons employed doing creative work in creative industries • 42,300 support workers - persons providing management and support services in creative industries • 42,792 embedded creative workers – persons engaged in creative work in other types of enterprise The most striking feature of this breakdown is the fact that the largest group of creative workers are employed outside the creative industries, i.e. in other types of businesses. Even within the creative industries, there are fewer people directly engaged in creative work than in providing management and support. Creative sector employees earned incomes of approximately $52,000 per annum at the time of the 2006 Census. This is relatively uniform across all three types of creative worker, and is significantly above the average for all employed persons (of approximately $40,700). Creative employment and incomes were growing strongly over both five year periods between the 1996, 2001 and 2006 Censuses. However, when we compare creative and general trends, we see two distinct phases in the development of the creative sector: • rapid structural growth over the five years to 2001 (especially led by developments in ICT), with creative employment and incomes increasing rapidly at a time when they were growing modestly across the whole economy; • subsequent consolidation, with growth driven by more by national economic expansion than structural change, and creative employment and incomes moving in parallel with strong economy-wide growth. Other important trends revealed by the data are that • the strongest growth during the decade was in embedded creative workers, especially over the first five years. The weakest growth was in creative specialists, with support workers in creative industries in the middle rank, • by far the strongest growth in creative industries’ employment was in Software & digital content, which trebled in size over the decade Comparing New Zealand with the United Kingdom and Australia, the two southern hemisphere nations have significantly lower proportions of total employment in the creative sector (both in creative industries and embedded employment). New Zealand’s and Australia’s creative shares in 2001 were similar (5.4% each), but in the following five years, our share has expanded (to 5.7%) whereas Australia’s fell slightly (to 5.2%) – in both cases, through changes in creative industries’ employment. The creative industries generated $10.5 billion in total gross output in the March 2006 year. Resulting from this was value added totalling $5.1b, representing 3.3% of New Zealand’s total GDP. Overall, value added in the creative industries represents 49% of industry gross output, which is higher than the average across the whole economy, 45%. This is a reflection of the relatively high labour intensity and high earnings of the creative industries. Industries which have an above-average ratio of value added to gross output are usually labour-intensive, especially when wages and salaries are above average. This is true for Software & Digital Content and Architecture, Design & Visual Arts, with ratios of 60.4% and 55.2% respectively. However there is significant variation in this ratio between different parts of the creative industries, with some parts (e.g. Software & Digital Content and Architecture, Design & Visual Arts) generating even higher value added relative to output, and others (e.g. TV & Radio, Publishing and Music & Performing Arts) less, because of high capital intensity and import content. When we take into account the impact of the creative industries’ demand for goods and services from its suppliers and consumption spending from incomes earned, we estimate that there is an addition to economic activity of: • $30.9 billion in gross output, $41.4b in total • $15.1b in value added, $20.3b in total • 158,100 people employed, 234,600 in total The total economic impact of the creative industries is approximately four times their direct output and value added, and three times their direct employment. Their effect on output and value added is roughly in line with the average over all industries, although the effect on employment is significantly lower. This is because of the relatively high labour intensity (and high earnings) of the creative industries, which generate below-average demand from suppliers, but normal levels of demand though expenditure from incomes. Drawing on these numbers and conclusions, we suggest some (slightly speculative) directions for future research. The goal is to better understand the contribution the creative sector makes to productivity growth; in particular, the distinctive contributions from creative firms and embedded creative workers. The ideas for future research can be organised into the several categories: • Understanding the categories of the creative sector– who is doing the business? In other words, examine via more fine grained research (at a firm level perhaps) just what is the creative contribution from the different aspects of the creative sector industries. It may be possible to categorise these in terms of more or less striking innovations. • Investigate the relationship between the characteristics and the performance of the various creative industries/ sectors; • Look more closely at innovation at an industry level e.g. using an index of relative growth of exports, and see if this can be related to intensity of use of creative inputs; • Undertake case studies of the creative sector; • Undertake case studies of the embedded contribution to growth in the firms and industries that employ them, by examining taking several high performing noncreative industries (in the same way as proposed for the creative sector). • Look at the aggregates – drawing on the broad picture of the extent of the numbers of creative workers embedded within the different industries, consider the extent to which these might explain aspects of the industries’ varied performance in terms of exports, growth and so on. • This might be able to extended to examine issues like the type of creative workers that are most effective when embedded, or test the hypothesis that each industry has its own particular requirements for embedded creative workers that overwhelms any generic contributions from say design, or IT.

GIS-based mapping and statistical analysis of air pollution and mortality in Brisbane, Australia

In this thesis, the relationship between air pollution and human health has been investigated utilising Geographic Information System (GIS) as an analysis tool. The research focused on how vehicular air pollution affects human health. The main objective of this study was to analyse the spatial variability of pollutants, taking Brisbane City in Australia as a case study, by the identification of the areas of high concentration of air pollutants and their relationship with the numbers of death caused by air pollutants. A correlation test was performed to establish the relationship between air pollution, number of deaths from respiratory disease, and total distance travelled by road vehicles in Brisbane. GIS was utilized to investigate the spatial distribution of the air pollutants. The main finding of this research is the comparison between spatial and non-spatial analysis approaches, which indicated that correlation analysis and simple buffer analysis of GIS using the average levels of air pollutants from a single monitoring station or by group of few monitoring stations is a relatively simple method for assessing the health effects of air pollution. There was a significant positive correlation between variable under consideration, and the research shows a decreasing trend of concentration of nitrogen dioxide at the Eagle Farm and Springwood sites and an increasing trend at CBD site. Statistical analysis shows that there exists a positive relationship between the level of emission and number of deaths, though the impact is not uniform as certain sections of the population are more vulnerable to exposure. Further statistical tests found that the elderly people of over 75 years age and children between 0-15 years of age are the more vulnerable people exposed to air pollution. A non-spatial approach alone may be insufficient for an appropriate evaluation of the impact of air pollutant variables and their inter-relationships. It is important to evaluate the spatial features of air pollutants before modeling the air pollution-health relationships.

Mapping the territory of economic risk

It is widely contended that we live in a „world risk society‟, where risk plays a central and ubiquitous role in contemporary social life. A seminal contributor to this view is Ulrich Beck, who claims that our world is governed by dangers that cannot be calculated or insured against. For Beck, risk is an inherently unrestrained phenomenon, emerging from a core and pouring out from and under national borders, unaffected by state power. Beck‟s focus on risk's ubiquity and uncontrollability at an infra-global level means that there is a necessary evenness to the expanse of risk: a "universalization of hazards‟, which possess an inbuilt tendency towards globalisation. While sociological scholarship has examined the reach and impact of globalisation processes on the role and power of states, Beck‟s argument that economic risk is without territory and resistant to domestic policy has come under less appraisal. This is contestable: what are often described as global economic processes, on closer inspection, reveal degrees of territorial embeddedness. This not only suggests that "global‟ flows could sometimes be more appropriately explained as international, regional or even local processes, formed from and responsive to state strategies – but also demonstrates what can be missed if we overinflate the global. This paper briefly introduces two key principles of Beck's theory of risk society and positions them within a review of literature debating the novelty and degree of global economic integration and its impact on states pursuing domestic economic policies. In doing so, this paper highlights the value for future research to engage with questions such as "is economic risk really without territory‟ and "does risk produce convergence‟, not so much as a means of reducing Beck's thesis to a purely empirical analysis, but rather to avoid limiting our scope in understanding the complex relationship between risk and state.

Evaluating the success of large-scale, integrated information systems through the lens of IS-impact and IS-support

This study proceeds from a central interest in the importance of systematically evaluating operational large-scale integrated information systems (IS) in organisations. The study is conducted within the IS-Impact Research Track at Queensland University of Technology (QUT). The goal of the IS-Impact Track is, "to develop the most widely employed model for benchmarking information systems in organizations for the joint benefit of both research and practice" (Gable et al, 2009). The track espouses programmatic research having the principles of incrementalism, tenacity, holism and generalisability through replication and extension research strategies. Track efforts have yielded the bicameral IS-Impact measurement model; the ‘impact’ half includes Organisational-Impact and Individual-Impact dimensions; the ‘quality’ half includes System-Quality and Information-Quality dimensions. Akin to Gregor’s (2006) analytic theory, the ISImpact model is conceptualised as a formative, multidimensional index and is defined as "a measure at a point in time, of the stream of net benefits from the IS, to date and anticipated, as perceived by all key-user-groups" (Gable et al., 2008, p: 381). The study adopts the IS-Impact model (Gable, et al., 2008) as its core theory base. Prior work within the IS-Impact track has been consciously constrained to Financial IS for their homogeneity. This study adopts a context-extension strategy (Berthon et al., 2002) with the aim "to further validate and extend the IS-Impact measurement model in a new context - i.e. a different IS - Human Resources (HR)". The overarching research question is: "How can the impacts of large-scale integrated HR applications be effectively and efficiently benchmarked?" This managerial question (Cooper & Emory, 1995) decomposes into two more specific research questions – In the new HR context: (RQ1): "Is the IS-Impact model complete?" (RQ2): "Is the ISImpact model valid as a 1st-order formative, 2nd-order formative multidimensional construct?" The study adhered to the two-phase approach of Gable et al. (2008) to hypothesise and validate a measurement model. The initial ‘exploratory phase’ employed a zero base qualitative approach to re-instantiating the IS-Impact model in the HR context. The subsequent ‘confirmatory phase’ sought to validate the resultant hypothesised measurement model against newly gathered quantitative data. The unit of analysis for the study is the application, ‘ALESCO’, an integrated large-scale HR application implemented at Queensland University of Technology (QUT), a large Australian university (with approximately 40,000 students and 5000 staff). Target respondents of both study phases were ALESCO key-user-groups: strategic users, management users, operational users and technical users, who directly use ALESCO or its outputs. An open-ended, qualitative survey was employed in the exploratory phase, with the objective of exploring the completeness and applicability of the IS-Impact model’s dimensions and measures in the new context, and to conceptualise any resultant model changes to be operationalised in the confirmatory phase. Responses from 134 ALESCO users to the main survey question, "What do you consider have been the impacts of the ALESCO (HR) system in your division/department since its implementation?" were decomposed into 425 ‘impact citations.’ Citation mapping using a deductive (top-down) content analysis approach instantiated all dimensions and measures of the IS-Impact model, evidencing its content validity in the new context. Seeking to probe additional (perhaps negative) impacts; the survey included the additional open question "In your opinion, what can be done better to improve the ALESCO (HR) system?" Responses to this question decomposed into a further 107 citations which in the main did not map to IS-Impact, but rather coalesced around the concept of IS-Support. Deductively drawing from relevant literature, and working inductively from the unmapped citations, the new ‘IS-Support’ construct, including the four formative dimensions (i) training, (ii) documentation, (iii) assistance, and (iv) authorisation (each having reflective measures), was defined as: "a measure at a point in time, of the support, the [HR] information system key-user groups receive to increase their capabilities in utilising the system." Thus, a further goal of the study became validation of the IS-Support construct, suggesting the research question (RQ3): "Is IS-Support valid as a 1st-order reflective, 2nd-order formative multidimensional construct?" With the aim of validating IS-Impact within its nomological net (identification through structural relations), as in prior work, Satisfaction was hypothesised as its immediate consequence. The IS-Support construct having derived from a question intended to probe IS-Impacts, too was hypothesised as antecedent to Satisfaction, thereby suggesting the research question (RQ4): "What is the relative contribution of IS-Impact and IS-Support to Satisfaction?" With the goal of testing the above research questions, IS-Impact, IS-Support and Satisfaction were operationalised in a quantitative survey instrument. Partial least squares (PLS) structural equation modelling employing 221 valid responses largely evidenced the validity of the commencing IS-Impact model in the HR context. ISSupport too was validated as operationalised (including 11 reflective measures of its 4 formative dimensions). IS-Support alone explained 36% of Satisfaction; IS-Impact alone 70%; in combination both explaining 71% with virtually all influence of ISSupport subsumed by IS-Impact. Key study contributions to research include: (1) validation of IS-Impact in the HR context, (2) validation of a newly conceptualised IS-Support construct as important antecedent of Satisfaction, and (3) validation of the redundancy of IS-Support when gauging IS-Impact. The study also makes valuable contributions to practice, the research track and the sponsoring organisation.

The neglected dimension of community liveability : impact on social connectedness and active ageing in higher density accommodation

Purpose This thesis is about liveability, place and ageing in the high density urban landscape of Brisbane, Australia. As with other major developed cities around the globe, Brisbane has adopted policies to increase urban residential densities to meet the main liveability and sustainability aim of decreasing car dependence and therefore pollution, as well as to minimise the loss of greenfield areas and habitats to developers. This objective hinges on urban neighbourhoods/communities being liveable places, which residents do not have to leave for everyday living. Community/neighbourhood liveability is an essential ingredient in healthy ageing in place and has a substantial impact upon the safety, independence and well-being of older adults. It is generally accepted that ageing in place is optimal for both older people and the state. The optimality of ageing in place generally assumes that there is a particular quality to environments or standard of liveability in which people successfully age in place. The aim of this thesis was to examine if there are particular environmental qualities or aspects of liveability that test optimality and to better understand the key liveability factors that contribute to successful ageing in place. Method A strength of this thesis is that it draws on two separate studies to address the research question of what makes high density liveable for older people. In Chapter 3, the two methods are identified and differentiated as Method 1 (used in Paper 1) and Method 2 (used in Papers 2, 3, 4 and 5). Method 1 involved qualitative interviews with 24 inner city high density Brisbane residents. The major strength of this thesis is the innovative methodology outlined in the thesis as Method 2. Method 2 involved a case study approach employing qualitative and quantitative methods. Qualitative data was collected using semi-structured, in-depth interviews and time-use diaries completed by participants during the week of tracking. The quantitative data was gathered using Global Positioning Systems for tracking and Geographical Information Systems for mapping and analysis of participants’ activities. The combination of quantitative and qualitative analysis captured both participants’ subjective perceptions of their neighbourhoods and their patterns of movement. This enhanced understanding of how neighbourhoods and communities function and of the various liveability dimensions that contribute to active ageing and ageing in place for older people living in high density environments. Both studies’ participants were inner-city high density residents of Brisbane. The study based on Method 1 drew on a wider age demographic than the study based on Method 2. Findings The five papers presented in this thesis by publication indicate a complex inter-relationship of the factors that make a place liveable. The first three papers identify what is comparable and different between the physical and social factors of high density communities/neighbourhoods. The last two papers explore relationships between social engagement and broader community variables such as infrastructure and the physical built environments that are risk or protective factors relevant to community liveability, active ageing and ageing in place in high density. The research highlights the importance of creating and/or maintaining a barrier-free environment and liveable community for ageing adults. Together, the papers promote liveability, social engagement and active ageing in high density neighbourhoods by identifying factors that constitute liveability and strategies that foster active ageing and ageing in place, social connections and well-being. Recommendations There is a strong need to offer more support for active ageing and ageing in place. While the data analyses of this research provide insight into the lived experience of high density residents, further research is warranted. Further qualitative and quantitative research is needed to explore in more depth, the urban experience and opinions of older people living in urban environments. In particular, more empirical research and theory-building is needed in order to expand understanding of the particular environmental qualities that enable successful ageing in place in our cities and to guide efforts aimed at meeting this objective. The results suggest that encouraging the presence of more inner city retail outlets, particularly services that are utilised frequently in people’s daily lives such as supermarkets, medical services and pharmacies, would potentially help ensure residents fully engage in their local community. The connectivity of streets, footpaths and their role in facilitating the reaching of destinations are well understood as an important dimension of liveability. To encourage uptake of sustainable transport, the built environment must provide easy, accessible connections between buildings, walkways, cycle paths and public transport nodes. Wider streets, given that they take more time to cross than narrow streets, tend to .compromise safety - especially for older people. Similarly, the width of footpaths, the level of buffering, the presence of trees, lighting, seating and design of and distance between pedestrian crossings significantly affects the pedestrian experience for older people and impacts upon their choice of transportation. High density neighbourhoods also require greater levels of street fixtures and furniture for everyday life to make places more useable and comfortable for regular use. The importance of making the public realm useful and habitable for older people cannot be over-emphasised. Originality/value While older people are attracted to high density settings, there has been little empirical evidence linking liveability satisfaction with older people’s use of urban neighbourhoods. The current study examined the relationships between community/neighbourhood liveability, place and ageing to better understand the implications for those adults who age in place. The five papers presented in this thesis add to the understanding of what high density liveable age-friendly communities/ neighbourhoods are and what makes them so for older Australians. Neighbourhood liveability for older people is about being able to age in place and remain active. Issues of ageing in Australia and other areas of the developed world will become more critical in the coming decades. Creating livable communities for all ages calls for partnerships across all levels of government agencies and among different sectors within communities. The increasing percentage of older people in the community will have increasing political influence and it will be a foolish government who ignores the needs of an older society.

Videogame control device impact on the play experience

New types of control devices for videogames have emerged and expanded the demographics of the game playing public, yet little is known about which populations of gamers prefer which style of interaction and why. This paper presents data from a study that seeks to clarify the influence the control interface has on the play experience. Three commercial control devices were categorised using an existing typology, according to how the interface maps physical control inputs with the virtual gameplay actions. The devices were then used in a within-groups experimental design aimed at measuring differences in play experience across 64 participants. Descriptive analysis is undertaken on the performance, play experience and preference results for each device. Potential explanations for these results are discussed, as well as the direction of future work.