What is wrong with a big house?

ln Australia in the 1950s, the average house size was approximately 100 mz. By 2008, the average size of a new house had risen to approximately 238 mz i.e. an increase of nearly 140%. Over the same period, occupancy levels have fallen by nearly one third from 3.7 to 2.5 persons per household. The aim of this paper is to contrast the total and per capita resource demand (direct and embodied energy, water and materials) for two houses typical of their respective era and draw some conclusions from the results. Using the software Autodesk Revit Architecture and drawings for typical 1950 and 2009 houses, the material quantities for these dwellings have been determined. Using known coefficients, the embodied energy and water in the materials have been calculated. Operating energy requirements have been calculated using NatHERS estimates. Water requirements have been calculated using historical and current water data. The greenhouse gas emissions associated with the resource use have also been calculated using established coefficients. Results are compared on a per capita basis. The research found that although the energy to operate the modern house and annual water use had fallen, the embodied energy and associated greenhouse gas emissions from material use had risen significantly. This was driven by the size of the house and the change in construction practices.

Impact of past and future residential housing development patterns on energy demand and related emissions

The continued outward growth from a central business district has been the dominant characteristic of most cities in Australia. However, this feature is seen as unsustainable and alternative scenarios to contain the outward growth are being proposed. Melbourne is currently grappling with this issue while simultaneously trying to reduce per capita greenhouse gas emissions. Housing size, style and its location are the three principal factors which determine the emissions from the residential sector. This paper describes a methodology to assess the combined impact of these factors on past and possible future forms of residential development in Melbourne. The analysis found that the location of the housing and its size are the dominant factors determining energy use and greenhouse gas emissions.

Energy and greenhouse gas emissions implications of alternative housing types for Australia

Many cities around the world are looking for ways to reduce their per capita greenhouse gas emissions. The outward growth of cities from a central business district, typical of many cities around the world, is often seen as working against this goal and as unsustainable. This is especially the case in circumstances where this growth is not supported by the necessary infrastructure, often resulting in an increase in the use of private transport. However, alternative scenarios to contain the outward growth are being proposed. This paper provides a comparison of the energy demand and greenhouse gas emissions between typical detached outer-suburban housing currently being built in Australia's major cities and inner-city and -suburban apartments, which are increasingly seen as a legitimate alternative to the housing that is currently being built on our outer city fringes. By analysing the energy demand associated with the construction and operation of each housing type and for occupant travel it was found that the location of the housing and its size are the dominant factors determining energy use and greenhouse gas emissions. The findings from this analysis provide useful information for policy-makers in planning the development of our cities into the future, when faced with a growing population and an increasing need to minimise greenhouse gas emissions.

Spatial growth in Australian homes (1960–2010)

The average new Australian home has grown from a four-roomed Victorian timber cottage of around 100 m2 at the start of the twentieth century to a 245 m2 brick-veneer house in 2011. The homes have grown in both size and number of rooms. Where has this growth occurred? How has Australia's average new house transitioned to now become the largest in the world? This paper traces where the growth has occurred within the house over the last 50 years. Thirty-nine houses in a suburb of Geelong, Victoria, have been analysed over the five decades, and the median house of the sample in each era has been used for the analysis. The results confirm the overall trend in house growth size that can be seen in national statistics. Most of the growth in house size has been due to the increase in living areas and in the number of and area used for bedrooms. Other variables of interest in understanding changes in Australian housing such as gross floor area, plot ratio, site size and house shape and orientation are also discussed in the context of limiting the impact of oversize houses.

The role of testosterone in bib size determination in the male house sparrow Passer domesticus, is age dependent

Secondary sexual signals are thought to indicate individual quality. In order to understand the evolutionary pressures that give rise to such traits it is important to understand the physiological mechanisms underlying their production. The black bib of the house sparrow Passer domesticus is known to function as a badge of social status in males. Past studies have found that the size of the bib in older males is determined, at least partly, by the androgen testosterone. The immunocompetence handicap hypothesis suggests that testosterone has a key role in maintaining honest signalling – it is both involved in the development or expression of sexual signals and is immunosuppressive. In this paper we test experimentally two hypo theses relating to bib size development, whether 1) testosterone is only immunosuppressive in conditions where the natural feedback loop from the testes has been removed, and 2) testosterone is, in addition to influencing the bib size of older males, responsible for the size of the bib in juvenile sparrows. In the first experiment we found that exogenous testosterone administered to intact males during the winter (when LH and FSH levels are very low and were not artificially increased by castration) caused significant immunosuppression, albeit in interaction with the stress hormone corticosterone. Second, we found that exogenous testosterone administration in castrated fledgling male house sparrows had no effect on subsequent post-juvenile moult bib size relative to controls. Our results suggest that in some circumstances testosterone can be immunosuppressive, but that its role in bib size determination is age-dependent.

Party Size and Constituency Representation: Evidence from the 19th-Century U.S. House of Representatives

Research on congressional parties assumes, but has not directly shown, that party size affects individual members' calculations. Drawing on a key case from the nineteenth-century House the secession-driven Republican hegemony of 1861 this article explores the hypothesis that party voting not only declines but also becomes more strongly linked to constituency factors as relative party size increases. The analysis reveals that the jump in party size coincides with (1) a decrease in party voting among individual continuing members, (2) a strengthening association between some constituency factors and party voting, and (3) patterns of decline in individual party voting that are explained in part by constituency measures.

Knowmore (House of Commons)

Knowmore (House of Commons) is a large scale generative interactive installation that incorporates embodied interaction, dynamic image creation, new furniture forms, touch sensitivity, innovative collaborative processes and multichannel generative sound creation. A large circular table spun by hand and a computer-controlled video projection falls on its top, creating an uncanny blend of physical object and virtual media. Participants’ presence around the table and how they touch it is registered, allowing up to five people to collaboratively ‘play’ this deeply immersive audiovisual work. Set within an ecological context, the work subtly asks what kind of resources and knowledges might be necessary to move us past simply knowing what needs to be changed to instead actually embodying that change, whilst hinting at other deeply relational ways of understanding and knowing the world. The work has successfully operated in two high traffic public environments, generating a subtle form of interactivity that allows different people to interact at different paces and speeds and with differing intentions, each contributing towards dramatic public outcomes. The research field involved developing new interaction and engagement strategies for eco-political media arts practice. The context was the creation of improved embodied, performative and improvisational experiences for participants; further informed by ‘Sustainment’ theory. The central question was, what ontological shifts may be necessary to better envision and align our everyday life choices in ways that respect that which is shared by all - 'The Commons'. The methodology was primarily practice-led and in concert with underlying theories. The work’s knowledge contribution was to question how new media interactive experience and embodied interaction might prompt participants to reflect upon the kind of resources and knowledges required to move past simply knowing what needs to be changed to instead actually embodying that change. This was achieved through focusing on the power of embodied learning implied by the works' strongly physical interface (i.e. the spinning of a full size table) in concert with the complex field of layered imagery and sound. The work was commissioned by the State Library of Queensland and Queensland Artworkers Alliance and significantly funded by The Australia Council for the Arts, Arts Queensland, QUT, RMIT Centre for Animation and Interactive Media and industry partners E2E Visuals. After premiering for 3 months at the State Library of Queensland it was curated into the significant ‘Mediations Biennial of Modern Art’ in Poznan, Poland. The work formed the basis of two papers, was reviewed in Realtime (90), was overviewed at Subtle Technologies (2010) in Toronto and shortlisted for ISEA 2011 Istanbul and included in the edited book/catalogue ‘Art in Spite of Economics’, a collaboration between Leonardo/ISAST (MIT Press); Goldsmiths, University of London; ISEA International; and Sabanci University, Istanbul.

Characterisation and source identification of selected pollutants in house dust

House dust is a heterogeneous matrix, which contains a number of biological materials and particulate matter gathered from several sources. It is the accumulation of a number of semi-volatile and non-volatile contaminants. The contaminants are trapped and preserved. Therefore, house dust can be viewed as an archive of both the indoor and outdoor air pollution. There is evidence to show that on average, people tend to stay indoors most of the time and this increases exposure to house dust. The aims of this investigation were to: " assess the levels of Polycyclic Aromatic Hydrocarbons (PAHs), elements and pesticides in the indoor environment of the Brisbane area; " identify and characterise the possible sources of elemental constituents (inorganic elements), PAHs and pesticides by means of Positive Matrix Factorisation (PMF); and " establish the correlations between the levels of indoor air pollutants (PAHs, elements and pesticides) with the external and internal characteristics or attributes of the buildings and indoor activities by means of multivariate data analysis techniques. The dust samples were collected during the period of 2005-2007 from homes located in different suburbs of Brisbane, Ipswich and Toowoomba, in South East Queensland, Australia. A vacuum cleaner fitted with a paper bag was used as a sampler for collecting the house dust. A survey questionnaire was filled by the house residents which contained information about the indoor and outdoor characteristics of their residences. House dust samples were analysed for three different pollutants: Pesticides, Elements and PAHs. The analyses were carried-out for samples of particle size less than 250 µm. The chemical analyses for both pesticides and PAHs were performed using a Gas Chromatography Mass Spectrometry (GC-MS), while elemental analysis was carried-out by using Inductively-Coupled Plasma-Mass Spectroscopy (ICP-MS). The data was subjected to multivariate data analysis techniques such as multi-criteria decision-making procedures, Preference Ranking Organisation Method for Enrichment Evaluations (PROMETHEE), coupled with Geometrical Analysis for Interactive Aid (GAIA) in order to rank the samples and to examine data display. This study showed that compared to the results from previous works, which were carried-out in Australia and overseas, the concentrations of pollutants in house dusts in Brisbane and the surrounding areas were relatively very high. The results of this work also showed significant correlations between some of the physical parameters (types of building material, floor level, distance from industrial areas and major road, and smoking) and the concentrations of pollutants. Types of building materials and the age of houses were found to be two of the primary factors that affect the concentrations of pesticides and elements in house dust. The concentrations of these two types of pollutant appear to be higher in old houses (timber houses) than in the brick ones. In contrast, the concentrations of PAHs were noticed to be higher in brick houses than in the timber ones. Other factors such as floor level, and distance from the main street and industrial area, also affected the concentrations of pollutants in the house dust samples. To apportion the sources and to understand mechanisms of pollutants, Positive Matrix Factorisation (PMF) receptor model was applied. The results showed that there were significant correlations between the degree of concentration of contaminants in house dust and the physical characteristics of houses, such as the age and the type of the house, the distance from the main road and industrial areas, and smoking. Sources of pollutants were identified. For PAHs, the sources were cooking activities, vehicle emissions, smoking, oil fumes, natural gas combustion and traces of diesel exhaust emissions; for pesticides the sources were application of pesticides for controlling termites in buildings and fences, treating indoor furniture and in gardens for controlling pests attacking horticultural and ornamental plants; for elements the sources were soil, cooking, smoking, paints, pesticides, combustion of motor fuels, residual fuel oil, motor vehicle emissions, wearing down of brake linings and industrial activities.

Elemental characterisation and detection of heavy metals in house dusts collected from sites in South-East Queensland, Australia

Knowledge of the elements present in house dusts is important in understanding potential health effects on humans. In this study, dust samples collected from 10 houses in south-east Queensland have been analysed by scanning electron microscopy and X-ray microanalysis to measure the inorganic element compositions and to investigate the form of heavy metals in the dusts. The overall analytical results were then used to discriminate between different localities using chemometric techniques. The relative amounts of elements, particularly of Si, Ca, and Fe, varied between size fractions and between different locations for the same size fraction. By analysing individual small particles, many other constituents were identified including Ti, Cr, Mn, Ni, Cu, Zn, Ba, Ag, W, Au, Hg, Pb, Bi, La and Ce. The heavy metals were mostly concentrated in small particles in the smaller size fractions, which allowed detection by particle analysis, though their average concentrations were very low.

Chromosomal rearrangements, phenotypic variation and modularity: A case study from a contact zone between house mouse Robertsonian races in Central Italy

The Western European house mouse, Mus musculus domesticus, is well-known for the high frequency of Robertsonian fusions that have rapidly produced more than 50 karyotipic races, making it an ideal model for studying the mechanisms of chromosomal speciation. The mouse mandible is one of the traits studied most intensively to investigate the effect of Robertsonian fusions on phenotypic variation within and between populations. This complex bone structure has also been widely used to study the level of integration between different morphogenetic units. Here, with the aim of testing the effect of different karyotypic assets on the morphology of the mouse mandible and on its level of modularity, we performed morphometric analyses of mice from a contact area between two highly metacentric races in Central Italy. We found no difference in size, while the mandible shape was found to be different between the two Robertsonian races, even after accounting for the genetic relationships among individuals and geographic proximity. Our results support the existence of two modules that indicate a certain degree of evolutionary independence, but no difference in the strength of modularity between chromosomal races. Moreover, the ascending ramus showed more pronounced interpopulation/race phenotypic differences than the alveolar region, an effect that could be associated to their different polygenic architecture. This study suggests that chromosomal rearrangements play a role in the house mouse phenotypic divergence, and that the two modules of the mouse mandible are differentially affected by environmental factors and genetic makeup.

Topics in Spatial Econometrics - With Applications to House Prices

Topics in Spatial Econometrics — With Applications to House Prices Spatial effects in data occur when geographical closeness of observations influences the relation between the observations. When two points on a map are close to each other, the observed values on a variable at those points tend to be similar. The further away the two points are from each other, the less similar the observed values tend to be. Recent technical developments, geographical information systems (GIS) and global positioning systems (GPS) have brought about a renewed interest in spatial matters. For instance, it is possible to observe the exact location of an observation and combine it with other characteristics. Spatial econometrics integrates spatial aspects into econometric models and analysis. The thesis concentrates mainly on methodological issues, but the findings are illustrated by empirical studies on house price data. The thesis consists of an introductory chapter and four essays. The introductory chapter presents an overview of topics and problems in spatial econometrics. It discusses spatial effects, spatial weights matrices, especially k-nearest neighbours weights matrices, and various spatial econometric models, as well as estimation methods and inference. Further, the problem of omitted variables, a few computational and empirical aspects, the bootstrap procedure and the spatial J-test are presented. In addition, a discussion on hedonic house price models is included. In the first essay a comparison is made between spatial econometrics and time series analysis. By restricting the attention to unilateral spatial autoregressive processes, it is shown that a unilateral spatial autoregression, which enjoys similar properties as an autoregression with time series, can be defined. By an empirical study on house price data the second essay shows that it is possible to form coordinate-based, spatially autoregressive variables, which are at least to some extent able to replace the spatial structure in a spatial econometric model. In the third essay a strategy for specifying a k-nearest neighbours weights matrix by applying the spatial J-test is suggested, studied and demonstrated. In the final fourth essay the properties of the asymptotic spatial J-test are further examined. A simulation study shows that the spatial J-test can be used for distinguishing between general spatial models with different k-nearest neighbours weights matrices. A bootstrap spatial J-test is suggested to correct the size of the asymptotic test in small samples.

Assessment of In-House Natural Product and Synthetic Compound Libraries Based on In vitro Inhibition of Cholinesterases

The first line medication for mild to moderate Alzheimer s disease (AD) is based on cholinesterase inhibitors which prolong the effect of the neurotransmitter acetylcholine in cholinergic nerve synapses which relieves the symptoms of the disease. Implications of cholinesterases involvement in disease modifying processes has increased interest in this research area. The drug discovery and development process is a long and expensive process that takes on average 13.5 years and costs approximately 0.9 billion US dollars. Drug attritions in the clinical phases are common due to several reasons, e.g., poor bioavailability of compounds leading to low efficacy or toxic effects. Thus, improvements in the early drug discovery process are needed to create highly potent non-toxic compounds with predicted drug-like properties. Nature has been a good source for the discovery of new medicines accounting for around half of the new drugs approved to market during the last three decades. These compounds are direct isolates from the nature, their synthetic derivatives or natural mimics. Synthetic chemistry is an alternative way to produce compounds for drug discovery purposes. Both sources have pros and cons. The screening of new bioactive compounds in vitro is based on assaying compound libraries against targets. Assay set-up has to be adapted and validated for each screen to produce high quality data. Depending on the size of the library, miniaturization and automation are often requirements to reduce solvent and compound amounts and fasten the process. In this contribution, natural extract, natural pure compound and synthetic compound libraries were assessed as sources for new bioactive compounds. The libraries were screened primarily for acetylcholinesterase inhibitory effect and secondarily for butyrylcholinesterase inhibitory effect. To be able to screen the libraries, two assays were evaluated as screening tools and adapted to be compatible with special features of each library. The assays were validated to create high quality data. Cholinesterase inhibitors with various potencies and selectivity were found in natural product and synthetic compound libraries which indicates that the two sources complement each other. It is acknowledged that natural compounds differ structurally from compounds in synthetic compound libraries which further support the view of complementation especially if a high diversity of structures is the criterion for selection of compounds in a library.

Fuel drop size measurement in a carburetted induction system with 2 throttling methods

A new throttling system far SI engines is examined. The SMD of the fuel droplets in the induction system is measured to evaluate the performance of the new device with respect to the conventional throttle plate arrangement. The measurements are conducted at steady now conditions. A forward angular scattering technique with a He-Ne laser beam is used for droplet size measurement. The experiments are carried out with different mixture strength, stream velocity and throttle positions. It is observed that A/F ratio has no effect on SMD. However, stream velocity and throttle position have a significant influence on SMD. The new throttling method is found to be more effective in reducing the SMD, particularly at low throttle opening and high stream velocity compared to the conventional throttle plate.