Judge Max Frankenbach of Berlin hiking with his wife Grete Frankenbach nee Bernstein; Sassal-Massone Portraits Couples

Digital Image

Fritz Gottschalk, Therese Gottschalk nee Molling and Lotte Stern nee Wallerstein on a hiking tour in the mountains.

Therese Gottschalk nee Molling, wife of Fritz Gottschalk; Lotte Stern nee Wallerstein, 1st cousin of Lotte Stern nee Wallerstein

Elizabeth Gottschalk hiking in the Alps with an unidentified guide.

Digital Image

Fritz Gottschalk outdoors dressed in his hiking clothes Portraits Men

Digital Image

Jacob Judey-Barosin and his father Hermann Judey hiking with friends; Sächsische Schweiz Portraits Men

l-r: Martin Lipschitz, Sam Kohn, Hermann Judey, Willy Lipschitz, Georg Eliasberg and Jacob Judey-Barosin

Fritz Gottschalk, Therese Gottschalk nee Molling and Lotte Stern nee Wallerstein on a hiking tour in the mountains.

Therese Gottschalk nee Molling, wife of Fritz Gottschalk; Lotte Stern nee Wallerstein, 1st cousin of Lotte Stern nee Wallerstein

Elizabeth Gottschalk hiking in the Alps with an unidentified guide.

Digital Image

Fritz Gottschalk outdoors dressed in his hiking clothes Portraits Men

Digital Image

Structural Veneer Based Composite Products from Hardwood Thinning - Part II: Testing of Hollow Utility Poles

Australian utility pole network is aging and reaching its end of life, with 70% of the 5 million poles currently in-service nationally installed within the 20 years following the end of World War II. The estimated investment required for the replacement or remedial maintenance of the aging 3.5 millions poles is as high as 1.75 billion dollars. Additionally, an estimated 21,700 high-durability new poles are required each year, representing further investment of 13.5 million dollars per year. Yet, agreements which progressively phase out logging of native forests around Australia have been signed, giving the industry about 25 years to make the transition from Crown native forests to plantations and private forests. As utility poles were traditionally cut from native forest hardwood species, finding solutions to source new poles currently presents a challenge. This paper presents tests on Veneer Based Composite hardwood hollow utility poles manufactured from Gympie messmate (Eucalyptus cloeziana) plantation thinning. Small diameter poles of nominal 115 mm internal diameter and 15 mm wall-thickness were manufactured in two half-poles butt jointed together, using 9 veneers per halfpole. The poles were tested in bending and shear, and experimental test results are presented. The mechanical performance of the hollow poles is discussed and compared to hardwood poles cut from mature trees and of similar size. Future research and different options for improving the current concept are proposed in order to provide a more reliable and cost effective technical solution to the current shortage of utility poles. © RILEM 2014.

Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees

Australia’s utility pole network is aging and approaching its end of life. It is estimated that 70% of the 5 million poles currently in-service nationally were installed within the 20 years following the end of World War II and require replacement or remedial maintenance. Additionally, an estimated 21,700 high-durability new poles are required each year to support the expansion of the energy network. Utility poles were traditionally cut from native forest hardwood species. However, due to agreements which progressively phase out logging of native forests around Australia, finding new sources for utility poles presents a challenge. This paper presents the development of veneer based composite hardwood hollow utility poles manufactured from mid-rotation Gympie messmate (Eucalyptus cloeziana) plantation thinned trees (also referred to as “thinning”), as an alternative to solid hardwood poles. The incentives behind the project and benefits of the proposed products are introduced in the paper. Small diameter poles, of nominal 115 mm internal diameter and 15 mm wall-thickness, were manufactured in two half-poles butt jointed together, using 9 hardwood veneers per half-pole. The poles were tested in bending and shear, and experimental test results are presented. The mechanical performance of the hollow poles is discussed and compared to hardwood poles sourced from mature trees and of similar size. Additionally, the required dimensions of the proposed hollow pole to replace actual solid poles are estimated. Results show that the proposed product represents a viable technical solution to the current shortage of utility poles. Future research and different options for improving the current concept are proposed in order to provide a more reliable and cost effective product for structural and architectural applications in general.