Index of soil physical quality of hardsetting soils on the brazilian coast

Many soils have a hard-setting behavior, also known as cohesive or "coesos". In such soils, the penetration resistance increases markedly when dry and decreases considerably when moist, creating serious limitations for plant emergence and growth. To evaluate the level of structure degradation in hard-setting soils with different texture classes and to create an index for assessing soil hardness levels in hard-setting soils, six soil representative profiles were selected in the field in various regions of Brazil. The following indices were tested: S, which measures soil physical quality, and H , which analyzes the degree of hardness and the effective stress in the soil during drying. Both indices were calculated using previously described functions based on data from the water-retention curves for the soils. The hard-setting values identified in different soils of the Brazilian Coastal Tablelands have distinct compaction (hardness) levels and can be satisfactorily measured by the H index. The S index was adequate for evaluating the structural characteristics of the hard-setting soils, classifying them as suitable or poor for cultivation, but only when the moisture level of the soil was near the inflection point. The H index showed that increases in density in hard-setting soils result from increases in effective stress and not from the soil texture. Values for Bd > 1.48 kg dm-3 classify the soil as hard-setting, and the structural organization is considered "poor".

Hardened properties of self-compacting concrete - A statistical approach

This work presents a statistical study on the variability of the mechanical properties of hardened self-compacting concrete, including the compressive strength, splitting tensile strength and modulus of elasticity. The comparison of the experimental results with those derived from several codes and recommendations allows evaluating if the hardened behaviour of self-compacting concrete can be appropriately predicted by the existing formulations. The variables analyzed include the maximum size aggregate, paste and gravel content. Results from the analyzed self-compacting concretes presented variability measures in the same range than the expected for conventional vibrated concrete, with all the results within a confidence level of 95%. From several formulations for conventional concrete considered in this study, it was observed that a safe estimation of the modulus of elasticity can be obtained from the value of compressive strength; with lower strength self-compacting concretes presenting higher safety margins. However, most codes overestimate the material tensile strength. (C) 2010 Elsevier Ltd. All rights reserved.

Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars

Mortar is the material responsible for the distribution of stresses in masonry structures. The knowledge about the fresh and hardened properties of mortar is fundamental to ensure a good performance of masonry walls. Water/cement ratio and aggregates grading are among several variables that influence physical and mechanical behaviour of mortars. An experimental program is presented in order to evaluate the influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars. Eighteen compositions of mortar are prepared using three relations cement:lime:sand, two types of sand and three water/cement ratios. Specimens are analyzed through flow table test, compressive and flexural strength tests. Results indicate that the increase of water/cement ratio reduces the values of hardened properties and increases the workability. Besides, sands grading has no influence in compressive strength. On the other hand, significant differences in deformation capacity of mortars were verified with the variation of the type of sand. Finally, some correlations are presented among hardened properties and the compressive strength. (C) 2010 Elsevier Ltd. All rights reserved.

Embrittlement of case hardened steel chain link

Various steel chain links presented cracking during their manufacturing process, which includes induction case hardening and electrogalvanizing steps. Fractographic examination of the exposed crack surfaces revealed intergranular cracking with some areas featuring a thin layer of iron oxide, indicating that the cracking took place after the electrogalvanizing step. The location of the cracks coincided with the position of the deepest case hardened layer, suggesting the occurrence of localized overheating during the induction case hardening step. Inductive heating finite element analysis (COSMOS Designstar Software) confirmed that during the case hardening the austenitising temperature reached in the crack region values of approximately 1050 degrees C. The results indicated that intergranular cracking was caused by hydrogen embrittlement. (C) 2009 Elsevier Ltd. All rights reserved.

Familial forms broaden the horizons for primary aldosteronism

The identification of familial forms of primary aldosteronism (PAL) has led to its detection in relatives of affected patients not suspected previously of having PAL. Many ave normokalemic and some ave even normotensive. This broadens the spectrum of PAL, permitting the study of its evolution and of intervention with specific therapy when hypertension develops. The genetic basis of one form involves steroid biosynthetic enzymes and the other form predisposes to hyperplasia and benign neoplasia.

Design and testing of a radiation hardened 13-bit 80 MS/s pipeline ADC implemented in a 90nm standard CMOS process

Second International Workshop on Analog and Mixed Signal Integrated Circuits for Space Applications (AMICSA 2008), Sintra, Portugal, Setembro de 2008

Energy resources management in three distinct time horizons considering a large variation in wind power

The intensive use of distributed generation based on renewable resources increases the complexity of power systems management, particularly the short-term scheduling. Demand response, storage units and electric and plug-in hybrid vehicles also pose new challenges to the short-term scheduling. However, these distributed energy resources can contribute significantly to turn the shortterm scheduling more efficient and effective improving the power system reliability. This paper proposes a short-term scheduling methodology based on two distinct time horizons: hour-ahead scheduling, and real-time scheduling considering the point of view of one aggregator agent. In each scheduling process, it is necessary to update the generation and consumption operation, and the storage and electric vehicles status. Besides the new operation condition, more accurate forecast values of wind generation and consumption are available, for the resulting of short-term and very short-term methods. In this paper, the aggregator has the main goal of maximizing his profits while, fulfilling the established contracts with the aggregated and external players.

stochastic method for automated matching of horizons across a fault in 3D seismic data

Seismic analysis, horizon matching, fault tracking, marked point process,stochastic annealing

Time Horizons And Smoothing In The Bank Of England’s Reaction Function: The Contrast Between The Standard GMM And Ex Ante Forecast Approaches

The monetary policy reaction function of the Bank of England is estimated by the standard GMM approach and the ex-ante forecast method developed by Goodhart (2005), with particular attention to the horizons for inflation and output at which each approach gives the best fit. The horizons for the ex-ante approach are much closer to what is implied by the Bank’s view of the transmission mechanism, while the GMM approach produces an implausibly slow adjustment of the interest rate, and suffers from a weak instruments problem. These findings suggest a strong preference for the ex-ante approach.

Time Horizons And Smoothing In The Bank Of England’s Reaction Function: The Contrast Between The Standard GMM And Ex Ante Forecast Approaches

The monetary policy reaction function of the Bank of England is estimated by the standard GMM approach and the ex-ante forecast method developed by Goodhart (2005), with particular attention to the horizons for inflation and output at which each approach gives the best fit. The horizons for the ex-ante approach are much closer to what is implied by the Bank’s view of the transmission mechanism, while the GMM approach produces an implausibly slow adjustment of the interest rate, and suffers from a weak instruments problem. These findings suggest a strong preference for the ex-ante approach.

Des céramiques aux hommes : étude céramique des premiers horizons fouillés sous la cathédrale Saint-Pierre de Genève (1er millénaire av. J.-C. - 40 apr. J.-C.)

Résumé Le travail présenté est basé sur l'analyse systématique des 145'157 fragments de céramique émanant de 2137 ensembles recueillis entre 1976 et 2003 lors de la fouille de la cathédrale Saint-Pierre. Datés entre le Ier millénaire av. J-C. et le XIXe siècle, ils témoignent de l'ampleur et de la richesse des activités menées au sein de ce site phare de la ville de Genève. Les particularités observées pour les six premiers horizons reconnus, qui couvrent une période comprise entre le Ier millénaire av. J.-C. et 40 apr. J.-C., liées aux structures a priori énigmatiques mises en évidence lors de la fouille, ont orienté le champ d'étude vers une compréhension fine du mobilier recueilli dans ces strates anciennes. Ainsi cadrée, l'étude s'est concentrée sur 237 complexes céramiques ayant livré 23'129 fragments. La corrélation stratigraphique menée sur les 8000 m2 de terrain fouillé a permis de porter l'analyse sur la répartition spatiale du corpus considéré. Développée également sur le plan diachronique, cette démarche a largement contribué à la définition des activités menées sur le site. Ainsi, la concentration de fragments de panses d'amphore et de vaisselle de table importée de Campanie au pied d'un tertre mis en évidence sous le choeur de la cathédrale a conduit à reconnaître l'existence d'un banquet funéraire témoignant de l'ensevelissement sous tumulus d'un aristocrate allobroge décédé entre 120 et 70 av. J.-C. Réparties sur la totalité de la surface occupée par la nef de la cathédrale et des rues la flanquant, les quelques 1024 coupes à boire de La Tène finale mises au jour ont quant à elles permis d'identifier les surfaces de gravier qu'elles scellaient comme une aire de rassemblement ayant abrité des banquets tenus périodiquement. Le maintien de ces activités rituelles et collectives jusqu'au milieu du Ier siècle de notre ère conclut l'analyse diachronique. La mise en perspective historique des données recueillies sur le terrain souligne l'importance de l'antique oppidum extremum des Allobroges, dont le sort fut en 58 av. J.-C. à l'origine de la Guerre des Gaules.

New Horizons in Forensic Imaging: Post Mortem CT Angiography - Benefits and Practical Application.

Puropse/Aim: To learn about the developement of post mortem CT angiography, its indications, benefits, pitfalls and practical application. Content Organization: A. Developement of post mortem CT angiography B. Technical prerequisites C. Practical application of post mortem CT angiography (preparation of the body, injection of contrast agent, examination protocol) D. Indications and benefits (including a comparison with conventional autopsy) E. Interpretation of imaging data (with case demonstrations) F. Artifacts, pitfalls and limitations G. Current and potential future use. Summary: This exhibit demonstrates the developement, application and interpretation of post mortem CT angiography. Teaching points: 1. post mortem CT angiography is feasible and useful for identification of the cause of death 2. depending on the indication it can be superior to autopsy 3. limitations and artifacts need to be known for interpreta

AMH New Horizons Belfast

This project focuses on individuals learning more about their health and wellbeing and developing action plans that they will take responsibility for. This will allow participants to examine and challenge issues which impact on their mental and physical health, including medicines. This project will involve users, staff, pharmacist and other providers. Like all projects this is a 2 way learning process, the staff will be use the pharmacy as a resource and the pharmacist will gain more awareness of health issues and the impact of living with mental health issues.