Geomorphology and land development in the Maraca area of northern Roraima, Brazil.

The geomorphological materials and forms of the Maraca area of Roraima, Brazil are described, an their sgnificance for land development examined. Significant contrasts are noted in areas presently under rainforest and savanna vegetation. Lateritic gravels and extensive shetwash accumulations in savanna areas constrast with incipient or absent plinthite development, few gravels and limited evidence of colluvium under rainforest. Terrain is in general relatively highly-dissected. Slope profiles are characterised, particularly within the savanna zone, by a relatively steep lower concavity. These contrasts are sharply-demarcated by the present savanna/rainforest bondary, unexpectedly in view of the generally accepted hypothesis of repeated contraction an expansion of Amazonian rainforest throughout the Pleistocene. It is concluded that geomorphological conditions in the Maraca area are not favorable for land develoment.

Analyzing complex rock slope deformation at Stampa, western Norway, by integrating geomorphology, kinematics and numerical modeling

The unstable rock slope, Stampa, above the village of Flåm, Norway, shows signs of both active and postglacial gravitational deformation over an area of 11 km2. Detailed structural field mapping, annual differential Global Navigation Satellite System (GNSS) surveys, as well as geomorphic analysis of high-resolution digital elevation models based on airborne and terrestrial laser scanning indicate that slope deformation is complex and spatially variable. Numerical modeling was used to investigate the influence of former rockslide activity and to better understand the failure mechanism. Field observations, kinematic analysis and numerical modeling indicate a strong structural control of the unstable area. Based on the integration of the above analyses, we propose that the failure mechanism is dominated by (1) a toppling component, (2) subsiding bilinear wedge failure and (3) planar sliding along the foliation at the toe of the unstable slope. Using differential GNSS, 18 points were measured annually over a period of up to 6 years. Two of these points have an average yearly movement of around 10 mm/year. They are located at the frontal cliff on almost completely detached blocks with volumes smaller than 300,000 m3. Large fractures indicate deep-seated gravitational deformation of volumes reaching several 100 million m3, but the movement rates in these areas are below 2 mm/year. Two different lobes of prehistoric rock slope failures were dated with terrestrial cosmogenic nuclides. While the northern lobe gave an average age of 4,300 years BP, the southern one resulted in two different ages (2,400 and 12,000 years BP), which represent most likely multiple rockfall events. This reflects the currently observable deformation style with unstable blocks in the northern part in between Joasete and Furekamben and no distinct blocks but a high rockfall activity around Ramnanosi in the south. With a relative susceptibility analysis it is concluded that small collapses of blocks along the frontal cliff will be more frequent. Larger collapses of free-standing blocks along the cliff with volumes > 100,000 m3, thus large enough to reach the fjord, cannot be ruled out. A larger collapse involving several million m3 is presently considered of very low likelihood.

21st century climate change: where has all the geomorphology gone?

This Commentary draws together recently published work relating to the relationship between climate change and geomorphology to address the surprising observation that geomorphic work seems to have had little impact upon the work of the Intergovernmental Panel for Climate Change. However, recent papers show that methodological innovation has allowed geomorphological reconstruction over timescales highly relevant to late 20th century and 21st century climate change. In turn, these and other developments are allowing links to be made between climatic variability and geomorphology, to begin to predict geomorphic futures and also to appreciate the role that geomorphic processes play in the flux of carbon and the carbon cycle.

Seeking good peer review in geomorphology

This paper provides an extended guide to reviewing for ESPL in particular and geomorphology in general. After a brief consideration of both how we choose reviewers and why we hope that reviewers will accept, I consider what makes a fair and constructive review. I note that we aim to publish papers with the rigour (r) necessary to sustain an original and significant contribution (q). I note that judging q is increasingly difficult because of the ever-growing size of the discipline (the Q). This is the sense in which we rarely have a full appreciation of Q, and our reviews are inevitably going to contain some bias. It is this bias that cannot be avoided (cf. Nicholas and Gordon, 2011) and makes the job of ESPL's Editors of critical importance. With this in mind, I identify six elements of a good review: (1) an introductory statement that explains your assessment of your competences in relation to the manuscript (r and Q); (2) a summative view of the originality and significance of the manuscript (q) in relation to Q: (3) a summative view of the methodological rigour of the manuscript (r); (4) identification and justification of any major concerns; (5) identification of any minor issues to be corrected if you think the manuscript merits eventual publication; and (6) note of any typographical or presentation issues to be addressed although this latter activity is also an editorial responsibility. In addition, I note the importance of a constructive review, grounded in what is written in the manuscript, justified where appropriate and avoiding reference to personal views as far as is possible. I conclude with a discussion of whether or not you should sign your review openly and the importance of reviewer confidentiality. Copyright (C) 2012 John Wiley & Sons, Ltd.

Good practice in authoring manuscripts on geomorphology

This article aims to help potential authors of geomorphological articles to get their work published. It identifies the basic characteristics of a good manuscript in geomorphology in terms of: (a) originality and significance; and (b) rigour. It uses these characteristics to define how an author should structure a conventional' manuscript in geomorphology by successfully identifying and justifying the motivation for the research; clearly and fully explaining the methods used; and presenting and discussing the results obtained. The article considers the importance of published literature in sustaining all elements of a manuscript in geomorphology. It also presents the natural symmetry that should exist between parts of a manuscript. These practical elements regarding the form and content of a manuscript are then developed through: (a) flagging some of the common mistakes made by authors drawing upon my experience as Managing Editor of the journal Earth Surface Processes and Landforms; (b) discussing the ethical and legal issues, including plagiarism, that relate to manuscript submission; (c) exploring the review process from the perspective of an author, including guidance on how best to respond to review comments in revising a manuscript. Copyright (c) 2013 John Wiley & Sons, Ltd.

Communicating geomorphology: global challenges for the twenty-first century

The British Society for Geomorphology (BSG), established as the British Geomorphological Research Group (BGRG) in 1960, is considering how best to represent geomorphology and geomorphologists in the light of recent changes in the nature of communication. These changes provide the BSG and other academic societies with challenges and opportunities. Seven drivers of communication change are outlined: the changing position of geomorphology in higher education, the nature of academic interaction, the means of communication available, a transformation in the nature of geomorphological research, changes in funding support, the government role in resource allocation, and developments in quantifying international research impact. Challenges arising from changing communications are identified as occurring beyond the `academy', in the nature of publication within the `academy', and associated with meetings of the `academy'. Although national societies now have to contemplate significantly different purposes to provide for their members than in the twentieth century, there are opportunities available that cannot be fulfilled by international organizations alone. Copyright (c) 2013 John Wiley & Sons, Ltd.

Evolution of Chaliyar River Drainage Basin: Insights from Tectonic Geomorphology

Drainage basins are durable geomorphic features that provide insights into the long term evolution of the landscape. River basin geometry develop response to the nature and distribution of uplift and subsidence, the spatial arrangement of lineaments (faults and joints), the relative resistance of different rock types and to climatically influenced hydrological parameters . For developing a drainage basin evolution history, it is necessary to understand physiography, drainage patterns, geomorphic features and its structural control and erosion status. The present study records evidences for active tectonic activities which were found to be responsible for the present day geomorphic set up of the study area since the Western Ghat evolution. A model was developed to explain the evolution of Chaliar River drainage basin based on detailed interpretation of morphometry and genesis of landforms with special emphasis on tectonic geomorphic indices and markers.

Uses of airborne scanning laser altimetry for river flood modelling and coastal geomorphology

Two ongoing projects at ESSC that involve the development of new techniques for extracting information from airborne LiDAR data and combining this information with environmental models will be discussed. The first project in conjunction with Bristol University is aiming to improve 2-D river flood flow models by using remote sensing to provide distributed data for model calibration and validation. Airborne LiDAR can provide such models with a dense and accurate floodplain topography together with vegetation heights for parameterisation of model friction. The vegetation height data can be used to specify a friction factor at each node of a model’s finite element mesh. A LiDAR range image segmenter has been developed which converts a LiDAR image into separate raster maps of surface topography and vegetation height for use in the model. Satellite and airborne SAR data have been used to measure flood extent remotely in order to validate the modelled flood extent. Methods have also been developed for improving the models by decomposing the model’s finite element mesh to reflect floodplain features such as hedges and trees having different frictional properties to their surroundings. Originally developed for rural floodplains, the segmenter is currently being extended to provide DEMs and friction parameter maps for urban floods, by fusing the LiDAR data with digital map data. The second project is concerned with the extraction of tidal channel networks from LiDAR. These networks are important features of the inter-tidal zone, and play a key role in tidal propagation and in the evolution of salt-marshes and tidal flats. The study of their morphology is currently an active area of research, and a number of theories related to networks have been developed which require validation using dense and extensive observations of network forms and cross-sections. The conventional method of measuring networks is cumbersome and subjective, involving manual digitisation of aerial photographs in conjunction with field measurement of channel depths and widths for selected parts of the network. A semi-automatic technique has been developed to extract networks from LiDAR data of the inter-tidal zone. A multi-level knowledge-based approach has been implemented, whereby low level algorithms first extract channel fragments based mainly on image properties then a high level processing stage improves the network using domain knowledge. The approach adopted at low level uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels. The higher level processing includes a channel repair mechanism.

Hydrology and geomorphology of the Upper White Nile lakes and their relevance for water resources management in the Nile basin

Remote sensing data and digital elevation models were utilized to extract the catchment hydrological parameters and to delineate storage areas for the Ugandan Equatorial Lakes region. Available rainfall/discharge data are integrated with these morphometric data to construct a hydrological model that simulates the water balance of the different interconnected basins and enables the impact of potential management options to be examined. The total annual discharges of the basins are generally very low (less than 7% of the total annual rainfall). The basin of the shallow (5 m deep) Lake Kioga makes only a minor hydrological contribution compared with other Equatorial Lakes, because most of the overflow from Lake Victoria basin into Lake Kioga is lost by evaporation and evapotranspiration. The discharge from Lake Kioga could be significantly increased by draining the swamps through dredging and deepening certain channel reaches. Development of hydropower dams on the Equatorial Lakes will have an adverse impact on the annual water discharge downstream, including the occasional reduction of flow required for filling up to designed storage capacities and permanently increasing the surface areas of water that is exposed to evaporation. On the basis of modelling studies, alternative sites are proposed for hydropower development and water storage schemes