Comparative Study Of Transgenic And Non-transgenic Maize (zea Mays) Flours Commercialized In Brazil, Focussing On Proteomic Analyses.

Genetically modified foods are a major concern around the world due to the lack of information concerning their safety and health effects. This work evaluates differences, at the proteomic level, between two types of crop samples: transgenic (MON810 event with the Cry1Ab gene, which confers resistance to insects) and non-transgenic maize flour commercialized in Brazil. The 2-D DIGE technique revealed 99 differentially expressed spots, which were collected in 2-D PAGE gels and identified via mass spectrometry (nESI-QTOF MS/MS). The abundance of protein differences between the transgenic and non-transgenic samples could arise from genetic modification or as a result of an environmental influence pertaining to the commercial sample. The major functional category of proteins identified was related to disease/defense and, although differences were observed between samples, no toxins or allergenic proteins were found.

Rheological and functional properties of flours from banana pulp and peel

Unripe banana flour can be an alternative to minimize post-harvest loss and to increase the aggregate value of banana fruit. Flour from unripe banana is rich in phytosterols and resistant starch, being proposed as health food. Flours from unripe banana peel and pulp were evaluated on their composition, phytosterols content, thermal and rheological properties, and pasting profiles. High amounts of beta-sitosterol, campesterol, and stigmasterol were found in flour from banana peel. These samples showed lower viscosity values of pasting profiles, lower energy enthalpy on gelatinization, and higher temperature of gelatinization than those ones from pulp. Anti-oxidant treatment of fruits with citric acid does not change pasting profiles of flours from pulp, but resulted in slight increase in viscosity, suggesting that structure of starch could be modified by acidification.

Hemoglobin curves during pregnancy before and after fortification of flours with iron

Objective: To assess the level of hemoglobin-Hb during pregnancy before and after fortification of flours with iron. Method: A cross-sectional study with data from 12,119 pregnant women attended at a public prenatal from five macro regions of Brazil. The sample was divided into two groups: Before-fortification (birth before June/2004) and After-fortification (last menstruation after June/2005). Hb curves were compared with national and international references. Polynomial regression models were built, with a significance level of 5%. Results: Although the higher levels of Hb in all gestational months after-fortification, the polynomial regression did not show the fortification effect (p=0.3). Curves in the two groups were above the references in the first trimester, with following decrease and stabilization at the end of pregnancy. Conclusion: Although the fortification effect was not confirmed, the study presents variation of Hb levels during pregnancy, which is important for assistencial practice and evaluation of public policies.


Development and characterization of edible films based on gluten from semi-hard and soft Brazilian wheat flours (development of films based on gluten from wheat flours)

Edible films based on gluten from four types of Brazilian wheat gluten (2 "semi-hard" and 2 "soft") were prepared and mechanical and barrier properties were compared with those of wheat gluten films with vital gluten. Water vapor, oxygen permeability, tensile strength and percent elongation at break, solubility in water and surface morphology were measured. The films from "semi-hard" wheat flours showed similar water vapor permeability and solubility in water to films from vital gluten and better tensile strength than the films from "soft" and vital gluten. The films from vital gluten had higher elongation at break and oxygen permeability and also lower solubility in water than the films from the Brazilian wheat "soft" flours. In spite of the vital gluten showed greater mechanical resistance, desirable for the bakery products, for the purpose of developing gluten films Brazilian "semi-hard" wheat flours can be used instead of vital gluten, since they showed similar barrier and mechanical properties.

Almond and peanut flours suppelmented with iron as potential ingredients to develop gluten-free cookies

Brazil is the second biggest worldwide producer of cookies and there are many varieties in the market; however, only a few are gluten-free. The objectives of this work were to formulate two gluten-free cookies added with iron, peanut or almond, and analyze their physicochemical, chromatic and sensory properties. Moisture, instrumental color (L*, a*, b* and C*), ash, proteins, lipids, iron, carbohydrates (estimated by difference), and water activity were determined. The acceptance of the products was assessed by 115 untrained taste panelists using a five-point hedonic scale. The data collected from the physicochemical analyses were submitted to Levene's, ANOVA, and Tukey's tests, which showed statistical difference (p < 0.05) in all the attributes for centesimal composition, water activity, and color of the cookies. Peanut and almond cookies could be considered sources of iron once they presented at least 15% of the daily recommended value of intake. They also garnered acceptance indexes of 80 and 85%, respectively, concluding that both formulations developed in this study were source of iron and contained high concentration of lipids and proteins with great sensory acceptance, suggesting their potential consumption by gluten-intolerants.

Functional properties and proximate composition of cactus pear cladodes flours

The objective of this research was to study the functional properties and proximate composition of three different flours prepared from cactus pear cladodes. Immature cactus pear cladodes were dried at 60 °C, 70 °C and 80 °C. The flours were analyzed for chemical composition, amino acid profile, fatty acid composition, functional properties and color. The analyses showed no significant differences in crude protein, total lipid, crude fiber and total ash content in the flours, possibly due to the drying temperature effect. Nevertheless, during the drying at 80 °C, a reduction of the water holding capacity (55%) was observed, along with a reduction of the green color intensity (34%) - characteristic of cactus pear. The heating produced larger concentrations of tyrosine, proline, aspartic acid, and glutamic acid. In the lipids of the flours, the most abundant fatty acids were palmitic acid (C16:0), linoleic acid (C18:2n6), linolenic acid (C18:3n3), and oleic acid (C18:1n9). The cladodes flours prepared at 60 °C presented a higher quality regarding their nutritional and functional properties.

Studies of chemical and enzymatic characteristics of Yacon (Smallanthus sonchifolius) and its flours

Due to the importance of studies on yacon related to health, its in natura pulp, in natura peel, pulp flour, and peel flour were chemically analyzed in terms of its centesimal composition, specific minerals, total dietary fiber and fractions, pH, total soluble solids, total titratable acidity, tannins, oxalic acid, and nitrate. The polyphenoloxidase and peroxidase enzymatic activities were evaluated for in natura pulp and peel only. Yacon pulp and peel flour presented average yield of 7.94% and 10.86%, respectively. The in natura pulp presented a higher moisture and carboydrate content and lower lipid, protein, total dietary fiber, and ash than those of the peel flour. The same pattern was observed for pulp flour when compared to peel flour. The highest tannin, nitrate, and oxalic acid levels were found in the peel flour, 15,304.5 mg.kg-1, 1,578.3 mg.kg-1, and 7,925.0 mg.kg-1 (wet weight), respectively. The polyphenoloxidase and peroxidase enzymes presented higher enzymatic activity in the yacon peel. Based on the results obtained, it can be said that the yacon and its derivatives are important dietary carbohydrate and mineral sources and contain antinutritional substance contents lower than those harmful to health.

Biochemical characteristics of composite flours: influence of fermentation

The purpose of this study was to introduce yam in the development of two new composite flours containing soy and cassava. Two composite flours were obtained after fermentation of yam, soybean, and cassava in respectively 60, 30, and 10% proportions. Two varieties of yam were used: Dioscorea alata (variety "Bete bete") and Dioscorea cayenensis (variety "Lokpa"). Proximate composition, mineral content, some anti-nutritional factors (oxalates, phenols), microbiological quality, and α-amylase digestibility were determined for the fermented and unfermented composite flours. The results indicated that for the composite flours made of D. alata and D. cayenensis, fermentation increased ash and titrable acidity. Carbohydrates, pH, and energy decreased. Crude fat content was not affected by the fermentation process. Anti-nutritional factors such as oxalates and phenols were found to decrease significantly after the fermentation of the composite flours. Fermentation increased the mineral content (Mg, K, Fe, and Ca) of the composite flours. A decrease in P and Na was observed after fermentation. The microbiological study showed that safety flours contain no potential pathogenic germs. The in vitro α-amylase digestibility of the composite flours was significantly improved after fermentation. The biochemical characteristics and good hygienic quality of the obtained flours suggest that these flours can be considered as a feeding alternative for children in poor areas where yam is produced.

Effect of different calcium sources on the antioxidant stability of tortilla chips from extruded and nixtamalized blue corn (Zea mays L.) flours

This research aimed to develop tortilla chips (TC) high in antioxidants from extruded and nixtamalized blue corn flours prepared with calcium hydroxide Ca(OH)2 and calcium lactate C6H10O6Ca. Tortilla chips were made with extruded flours [0.1% Ca(OH)2; 0.9% C6H10O6Ca; without calcium] and nixtamalized flours [1% Ca(OH)2; 2.95% C6H10O6Ca] using the frying process. Total anthocyanin, total phenolics content, antioxidant activity, color, texture, and oil content were determined. The color of tortilla chips from extruded flours (TCEF) showed high values of the parameters a* and b* indicating a reduction in the blue color. These color parameters were significantly different from those observed in tortilla chips from nixtamalized flours (TCNF), which tended to be more blue. The TCEF retained 15% anthocyanins, 34% phenolics, and 54% antioxidant activity. Pearson's correlation analysis indicated that anthocyanins and phenolics correlated significantly with antioxidant activity and color. TCEF with both calcium sources showed higher fracturability compared with that of TCNF. Oil absorption showed an opposite effect, with lower oil content in TCEF. Nixtamalization and extrusion with C6H10O6Ca resulted in flours and TC high in anthocyanins and antioxidant activity, representing an alternative production process for corn snack high in antioxidants.

Physicochemical properties of frozen tortillas from nixtamalized maize flours enriched with β-glucans

AbstractEffects of different β-glucan concentrations in maize flour on the properties of frozen maize tortillas were evaluated. Masa (dough), pre-cooked (PTs), frozen (FTs), thawed (TTs), and cooked tortillas (CTs) were made and analyzed. Moisture content of masa and tortillas significantly decreased as β-glucan concentration increased; however, the water absorption capacity (WAC), ice melting enthalpy, and frozen water in FTs increased. Texture and color of the masa, PTs, and CTs as well as sensory analysis showed differences only between tortillas with 0% and 4% β-glucans. β-glucans did not affect the texture of CTs. Soluble fiber increased by over threefold and fivefold in tortillas with 2% and 4% β-glucans, respectively, than in those without β-glucans. This result was consistent with the observed structural changes in tortillas, showing an increase in high-fiber aggregates with increasing β-glucan concentration. Tortillas with 2% β-glucans showed acceptable physicochemical, functional, and sensory properties, but over three times the soluble fiber. Therefore, it is possible to obtain frozen tortillas with high fiber content and increase their shelf life for subsequent cooking while maintaining good properties.

Effect of adding flours from marolo fruit (Annona crassiflora Mart) and jerivá fruit (Syagrus romanzoffiana Cham Glassm) on the physicals and sensory characteristics of food bars

Abstract The marolo (Annona crassiflora Mart.) and jerivá (Syagrus romanzoffiana Cham Glassm) fruits grow in the Cerrado biome, and have important sensory and nutritional characteristics. These fruits are eaten fresh or processed and embedded in ice cream, candy, juices, and liquors. However, their use is very limited and is localized exclusively to their native region. The aim of this study was to evaluate the use of these fruits in food consumer products to improve the nutritional patterns of consumers and extend knowledge thereof. To do this, different levels (0%, 5%, 10%, 15%, and 20%) of flour derived from the marolo and jerivá fruits were incorporated into food bars, which were then characterized in terms of their physical of the texture (TPA), porosity, color and sensorial properties. The food bars enriched with marolo and jerivá flours had an intense yellow color and increased hardness relative to the control bars; the porosity of the bars progressively decreased as the amount of flour added increased. The sensorial analysis in the snack bars developed added with the fruits flour no was influence by incorporation this component, showed good averages for the scores evaluated.