Channel tracking algorithms for highly efficient wireless broadband communications in rural areas

High-speed broadband internet access is widely recognised as a catalyst to social and economic development, having a significant impact on global economy. Rural Australia’s inherent dispersed population over a large geographical area make the delivery of efficient, well-maintained and cost-effective internet a challenging task. The novel and highly-efficient Multi-User-Single-Antenna for MIMO (MUSA-MIMO) broadband wireless communication technology can effectively be used to deliver wireless broadband access to rural areas. This research aims to develop for the first time, an efficient and accurate algorithm for the tracking and prediction of Channel State Information (CSI) at the transmitter, by characterising time variation effects of the wireless communication channel on the performance of a highly-efficient MUSA-MIMO technology particularly suited for rural communities, improving their quality of life and economic prosperity.

Efficient wireless broadband communications to rural area

This paper discusses how internet services can be brought one step closer to the rural dispersed communities by improving wireless broadband communications in those areas. To accomplish this objective we describe the use of an innovative Multi-User-Single-Antenna for MIMO (MUSA-MIMO) technology using the spectrum currently allocated to analogue TV. MUSA-MIMO technology can be considered as a special case of MIMO technology, which is beneficial when provisioning reliable and high-speed communication channels. This paper describes channel modelling techniques to characterise the MUSA-MIMO system allowing an effective deployment of this technology. Particularly, it describes the development of a novel MUSA MIMO channel model that takes into account temporal variations in the rural wireless environment. This can be considered as a novel approach tailor-maid to rural Australia for provisioning efficient wireless broadband communications.

Measurement, modelling and capacity analysis for novel, fixed multi-user single-antenna MIMO-OFDM system, in rural environments

High-speed broadband internet access is widely recognised as a catalyst to social and economic development. However, the provision of broadband Internet services with the existing solutions to rural population, scattered over an extensive geographical area, remains both an economic and technical challenge. As a feasible solution, the Commonwealth Scientific and Industrial Research Organization (CSIRO) proposed a highly spectrally efficient, innovative and cost-effective fixed wireless broadband access technology, which uses analogue TV frequency spectrum and Multi-User MIMO (MUMIMO) technology with Orthogonal-Frequency-Division-Multiplexing (OFDM). MIMO systems have emerged as a promising solution for the increasing demand of higher data rates, better quality of service, and higher network capacity. However, the performance of MIMO systems can be significantly affected by different types of propagation environments e.g., indoor, outdoor urban, or outdoor rural and operating frequencies. For instance, large spectral efficiencies associated with MIMO systems, which assume a rich scattering environment in urban environments, may not be valid for all propagation environments, such as outdoor rural environments, due to the presence of less scatterer densities. Since this is the first time a MU-MIMO-OFDM fixed broadband wireless access solution is deployed in a rural environment, questions from both theoretical and practical standpoints arise; For example, what capacity gains are available for the proposed solution under realistic rural propagation conditions?. Currently, no comprehensive channel measurement and capacity analysis results are available for MU-MIMO-OFDM fixed broadband wireless access systems which employ large scale multiple antennas at the Access Point (AP) and analogue TV frequency spectrum in rural environments. Moreover, according to the literature, no deterministic MU-MIMO channel models exist that define rural wireless channels by accounting for terrain effects. This thesis fills the aforementioned knowledge gaps with channel measurements, channel modeling and comprehensive capacity analysis for MU-MIMO-OFDM fixed wireless broadband access systems in rural environments. For the first time, channel measurements were conducted in a rural farmland near Smithton, Tasmania using CSIRO's broadband wireless access solution. A novel deterministic MU-MIMO-OFDM channel model, which can be used for accurate performance prediction of rural MUMIMO channels with dominant Line-of-Sight (LoS) paths, was developed under this research. Results show that the proposed solution can achieve 43.7 bits/s/Hz at a Signal-to- Noise Ratio (SNR) of 20 dB in rural environments. Based on channel measurement results, this thesis verifies that the deterministic channel model accurately predicts channel capacity in rural environments with a Root Mean Square (RMS) error of 0.18 bits/s/Hz. Moreover, this study presents a comprehensive capacity analysis of rural MU-MIMOOFDM channels using experimental, simulated and theoretical models. Based on the validated deterministic model, further investigations on channel capacity and the eects of capacity variation, with different user distribution angles (θ) around the AP, were analysed. For instance, when SNR = 20dB, the capacity increases from 15.5 bits/s/Hz to 43.7 bits/s/Hz as θ increases from 10° to 360°. Strategies to mitigate these capacity degradation effects are also presented by employing a suitable user grouping method. Outcomes of this thesis have already been used by CSIRO scientists to determine optimum user distribution angles around the AP, and are of great significance for researchers and MU-MUMO-OFDM system developers to understand the advantages and potential capacity gains of MU-MIMO systems in rural environments. Also, results of this study are useful to further improve the performance of MU-MIMO-OFDM systems in rural environments. Ultimately, this knowledge contribution will be useful in delivering efficient, cost-effective high-speed wireless broadband systems that are tailor-made for rural environments, thus, improving the quality of life and economic prosperity of rural populations.

Effective channel state information (CSI) feedback for MIMO systems in wireless broadband communications

This research has analysed both reciprocity and feedback mechanisms in multi-antenna wireless systems. It has presented the basis of an effective CSI feedback mechanism that efficiently provides the transmitter with the minimum information to allow the accurate knowledge of a rapidly changing channel. The simulations have been conducted using MATLAB to measure the improvement when the channel is estimated at the receiver in a 2 X 2 multi-antenna system and compared to the case of perfect channel knowledge at the receiver.

Software for wireless broadband system design

The paper looks at the software of leading companies in the field of wireless broadband systems development. The basic characteristics of appropriate software and design systems are shown including the most typical examples for their implementation.

Analysis of rural MUSA-MIMO-OFDM uplink channel capacity

Multi-user single antenna multiple-input multiple-output orthogonal frequency division multiplexing (MUSA-MIMO-OFDM) is a promising technology to improve the spectrum efficiency of fixed wireless broadband access systems in rural areas. This letter investigates the capacity of MUSA-MIMO-OFDM uplink channel by theoretical, simulation, and empirical approaches considering up to six users. We propose an empirical capacity formula suitable for rural areas. Characteristics of channel capacity temporal variations and their relationship with the wind speed, observed in a rural area, are also presented in this letter.

Prediction and measurement of multiuser MIMO-OFDM channel in rural Australia

Commonwealth Scientific and Industrial Research Organization (CSIRO) has recently conducted a technology demonstration of a novel fixed wireless broadband access system in rural Australia. The system is based on multi user multiple-input multiple-output orthogonal frequency division multiplexing (MU-MIMO-OFDM). It demonstrated an uplink of six simultaneous users with distances ranging from 10 m to 8.5 km from a central tower, achieving 20 bits s/Hz spectrum efficiency. This paper reports on the analysis of channel capacity and bit error probability simulation based on the measured MUMIMO-OFDM channels obtained during the demonstration, and their comparison with the results based on channels simulated by a novel geometric optics based channel model suitable for MU-MIMO OFDM in rural areas. Despite its simplicity, the model was found to predict channel capacity and bit error rate probability accurately for a typical MU-MIMO-OFDM deployment scenario.

Modelling the broadband wireless channel in rural Australia

The internet infrastructure which supports high data rates has a major impact on the Australian economy and the world. However, in rural Australia, the provision of broadband services to an internet dispersed population over a large geographical area with low population densities remains both an economic and technical challenge [1]. Furthermore, the implementation of currently available technologies such as fibre-to-the-premise (FTTP), 3G, 4G and WiMAX seems to be impractical, considering the low population density that is distributed in a large area. Therefore, new paradigms and innovative telecommunication technologies need to be explored to overcome the challenges of providing faster and more reliable broadband internet services to internet dispersed rural areas. The research project implements an innovative Multi-User- Single-Antenna for MIMO (MUSA-MIMO) technology using the spectrum currently allocated to analogue TV. MUSAMIMO technology can be considered as a special case of MIMO technology, which is beneficial when provisioning reliable and high-speed communication channels. Particularly, the abstract describes the development of a novel MUSA-MIMO channel model that takes into account temporal variations in the rural wireless environment. This can be considered as a novel approach tailor-made to rural Australia for provisioning efficient wireless broadband communications.

The importance of broadband for socio-economic development: a perspective from rural Australia

Advanced connectivity offers rural communities prospects for socio-economic development. Despite Australia’s national broadband infrastructure plans, inferior availability and quality of rural Internet connections remain persistent issues. This article examines the impact of limited connectivity on rural socio-economic opportunities, drawing from the views of twelve citizens from the Boorowa local government area in New South Wales. The available fixed wireless and satellite connections in Boorowa are slow and unreliable, and remote regions in the municipality are still without any Internet access. Participants identified four key areas in their everyday lives that are impacted by insufficient connectivity: business development, education, emergency communication, and health. Rural citizens often already face challenges in these areas, and infrastructure advancements in urban spaces can exacerbate rural-urban disparities. Participants’ comments demonstrated apprehension that failure to improve connectivity would result in adverse long-term consequences for the municipality. This article suggests that current broadband policy frameworks require strategic adaptations to account for the socio-economic and geographic contexts of rural communities. In order to narrow Australia’s rural-urban digital divide, infrastructure developments should be prioritised in the most underserved regions.

Towards Energy Consumption Measurement in a Cloud Computing Wireless Testbed

The evolution of the Next Generation Networks, especially the wireless broadband access technologies such as Long Term Evolution (LTE) and Worldwide Interoperability for Microwave Access (WiMAX), have increased the number of "all-IP" networks across the world. The enhanced capabilities of these access networks has spearheaded the cloud computing paradigm, where the end-users aim at having the services accessible anytime and anywhere. The services availability is also related with the end-user device, where one of the major constraints is the battery lifetime. Therefore, it is necessary to assess and minimize the energy consumed by the end-user devices, given its significance for the user perceived quality of the cloud computing services. In this paper, an empirical methodology to measure network interfaces energy consumption is proposed. By employing this methodology, an experimental evaluation of energy consumption in three different cloud computing access scenarios (including WiMAX) were performed. The empirical results obtained show the impact of accurate network interface states management and application network level design in the energy consumption. Additionally, the achieved outcomes can be used in further software-based models to optimized energy consumption, and increase the Quality of Experience (QoE) perceived by the end-users.

Análisis prospectivo del despliegue de redes de comunicaciones móviles LTE en nuevas bandas de frecuencia mediante el desarrollo de modelos tecnoeconómicos

El estándar LTE se ha posicionado como una de las claves para que los operadores de telecomunicación puedan abordar de manera eficiente en costes el crecimiento de la demanda de tráfico móvil que se prevé para los próximos años, al ser una tecnología más escalable en el núcleo de la red y más flexible en la interfaz radio que sus predecesoras. En este sentido, es necesario también que los reguladores garanticen un acceso al espectro radioeléctrico adecuado, equitativo y no discriminatorio, que permita un entorno estable para el despliegue de redes de comunicaciones móviles avanzadas. Además de la flexibilización del marco regulador del espectro radioeléctrico en Europa, que ha permitido el despliegue de nuevas tecnologías en las bandas de frecuencia históricas de GSM, se ha puesto a disposición espectro adicional para sistemas IMT en nuevas bandas de frecuencia, lo que ha planteando a su vez nuevos retos para la tecnología y la regulación. La fragmentación del espectro disponible para comunicaciones móviles ha impulsado el desarrollo de técnicas de agregación de portadoras en las nuevas versiones del estándar LTE, que permiten explotar mejor los recursos radio en su conjunto. No obstante, el espectro inferior a 1 GHz sigue siendo escaso, ya que el tráfico móvil aumenta y la banda de 900 MHz aún se utiliza para servicios GSM, lo que no ha conseguido sino agravar la disputa entre los servicios de radiodifusión terrestre y de comunicaciones móviles por la parte superior de la banda UHF. En concreto, la banda de 700 MHz se perfila como una de las próximas para aumentar el espectro disponible para los servicios en movilidad, si bien su liberación por parte de las actuales redes de Televisión Digital Terrestre presenta no pocas dificultades en los Estados miembros en los que ésta es la principal plataforma audiovisual de acceso gratuito, abriendo un debate sobre el modelo audiovisual a largo plazo en Europa. Por otro lado, las políticas públicas de promoción del acceso a la banda ancha rápida y ultrarrápida de la presente década han establecido objetivos ambiciosos para el año 2020, tanto en el ámbito europeo como en los diferentes Estados miembros. La universalización del acceso a redes de banda ancha de al menos 30 Mbps constituye uno de los principales retos. Las expectativas generadas por la tecnología LTE y la puesta a disposición de nuevas bandas de frecuencia hace posible que los servicios de acceso fijo inalámbrico adquieran especial relevancia ante los objetivos de política pública establecidos que, como ha sido reconocido en diversas ocasiones, no podrán lograrse sino con un compendio de diferente tecnologías. Para esta Tesis Doctoral se han desarrollado una serie modelos tecnoeconómicos con el objetivo de realizar un análisis prospectivo que evalúa tres casos de especial relevancia en el despliegue de redes LTE: en primer lugar, la valoración económica de la banda de 700 MHz; en segundo lugar, la evaluación de modelos de negocio y reducción de costes considerando tecnologías femtocelulares; y finalmente, la viabilidad de las redes LTE de acceso fijo inalámbrico para el cierre de la brecha digital en el acceso a la banda ancha de 30 Mbps. En relación con la aplicación del análisis tecnoeconómico para la valoración del espectro de 700 MHz, los resultados obtenidos ponen de manifiesto dos cuestiones fundamentales. En primer lugar, la necesidad de asignar a los operadores más espectro para satisfacer las previsiones de demanda de tráfico móvil a medio plazo. En segundo, existe una diferencia notable en los costes de despliegue de una red LTE cuando se dispone de espectro en frecuencias inferiores a 1 GHz y cuando no, pero esta diferencia de costes disminuye a medida que se añade nuevo espectro sub-1GHz. De esta manera, la atribución de la banda de 700 MHz a servicios de comunicaciones móviles supone una reducción relevante en los costes de despliegue si el operador no dispone de espectro en la banda de 800 MHz, pero no así si ya dispone de espectro en bandas bajas para el despliegue. En este sentido, puede concluirse que el precio que los operadores estarán dispuestos a pagar por el espectro de la banda de 700 MHz dependerá de si ya tienen disponible espectro en la banda de 800 MHz. Sin embargo, dado que la competencia por ese espectro será menor, los ingresos esperables en las licitaciones de esta nueva banda serán en general menores, a pesar de que para algunos operadores este espectro sería tan valioso como el de 800 MHz. En segundo lugar, en relación con el despliegue de femtoceldas pueden extraerse algunas conclusiones en términos de ahorro de costes de despliegue y también de cara a la viabilidad de los modelos de negocio que posibilitan. El ahorro que supone la introducción de femtoceldas en el despliegue de una red LTE frente al caso de un despliegue exclusivamente macrocelular se ha demostrado que es mayor cuanto menor es el ancho de banda disponible para la red macrocelular. En esta línea, para un operador convergente el despliegue de femtoceldas tiene sentido económico si el ancho de banda disponible es escaso (en torno a 2x10 MHz), que, en el caso de España, puede reflejar el caso de los operadores del segmento fijo que son nuevos entrantes en el móvil. Por otro lado, los modelos de acceso abierto son interesantes para operadores exclusivamente móviles, porque consiguen flexibilizar los costes sustituyendo estaciones base macrocelulares por el despliegue de femtoceldas, pero necesitan desplegarse en zonas con una densidad de población relativamente elevada para que éstas descarguen tráfico de varios usuarios de la red macrocelular simultáneamente. No obstante, las femtoceldas son beneficiosas en todo caso si es el usuario quien asume los costes de la femtocelda y el backhaul, lo que sólo parece probable si se integran en el modelo de negocio de comercialización de nuevos servicios. Por tanto, el despliegue de femtoceldas en buena parte de la casuística estudiada sólo tiene sentido si consiguen aumentar los ingresos por usuario comercializando servicios de valor añadido que necesiten calidad de servicio garantizada y exploten a la vez de esa forma su principal ventaja competitiva respecto a la tecnología WiFi. Finalmente, en relación con el papel de la tecnología LTE para la provisión de servicios de acceso fijo inalámbrico para la banda ancha de 30 Mbps, se ha desarrollado un modelo TD-LTE y mediante la metodología de análisis tecnoeconómico se ha realizado un estudio prospectivo para el caso de España. Los resultados obtenidos preciden una huella de cobertura de FTTH del 74% para 2020, y demuestran que una red TD-LTE en la banda de 3,5 GHz resulta viable para aumentar la cobertura de servicios de 30 Mbps en 14 puntos porcentuales. Junto con la consideración de la cobertura de otras redes, la cobertura de 30 Mbps de acuerdo a la viabilidad de los despliegues alcanzaría el 95% en España en el año 2020. Como resumen, los resultados obtenidos muestran en todos los casos la capacidad de la tecnología LTE para afrontar nuevos desafíos en relación con el aumento del tráfico móvil, especialmente crítico en las zonas más urbanas, y el cierre de la brecha digital en el acceso a la banda ancha rápida en las zonas más rurales. ABSTRACT The LTE standard has been pointed out as one of the keys for telecom operators to address the demand growth in mobile traffic foreseen for the next years in a cost-efficient way, since its core network is more scalable and its radio interface more flexible than those of its predecessor technologies. On the other hand, regulators need to guarantee an adequate, equitable and non-discriminatory access to radio spectrum, which enable a favorable environment for the deployment of advanced mobile communication networks. Despite the reform of the spectrum regulatory framework in Europe, which allowed for the deployment of new technologies in the historic GSM bands, additional spectrum has been allocated to IMT systems in new frequency bands, what in turn has set out new challenges for technology and regulation. The current fragmentation of available spectrum in very different frequency bands has boosted the development of carrier aggregation techniques in most recent releases of the LTE standard, which permit a better exploitation of radio resources as a whole. Nonetheless, spectrum below 1 GHz is still scarce for mobile networks, since mobile traffic increases at a more rapid pace than spectral efficiency and spectrum resources. The 900 MHz frequency band is still being used for GSM services, what has worsen the dispute between mobile communication services and terrestrial broadcasting services for the upper part of the UHF band. Concretely, the 700 MHz frequency band has been pointed out as one of the next bands to be allocated to mobile in order to increase available spectrum. However, its release by current Digital Terrestrial Television networks is challenging in Member States where it constitutes the main free access audiovisual platform, opening up a new debate around the audiovisual model in the long term in Europe. On the other hand, public policies of the present decade to promote fast and ultrafast broadband access has established very ambitious objectives for the year 2020, both at European and national levels. Universalization of 30 Mbps broadband access networks constitutes one of the main challenges. Expectations raised by LTE technology and the allocation of new frequency bands has lead fixed wireless access (FWA) services to acquire special relevance in light of public policy objectives, which will not be met but with a compendium of different technologies, as different involved stakeholders have acknowledged. This PhD Dissertation develops techno-economic models to carry out a prospective analysis for three cases of special relevance in LTE networks’ deployment: the spectrum pricing of the 700 MHz frequency band, an assessment of new business models and cost reduction considering femtocell technologies, and the feasibility of LTE fixed wireless access networks to close the 30 Mbps broadband access gap in rural areas. In the first place and regarding the application of techno-economic analysis for 700 MHz spectrum pricing, obtained results reveal two core issues. First of all, the need to allocate more spectrum for operators in order to fulfill mobile traffic demand in the mid-term. Secondly, there is a substantial difference in deployment costs for a LTE network when there is sub-1GHz spectrum available and when there is not, but this difference decreases as additional sub-1GHz spectrum is added. Thus, the allocation of 700 MHz band to mobile communication services would cause a relevant reduction in deployment costs if the operator does not count on spectrum in the 800 MHz, but not if it already has been assigned spectrum in low frequencies for the deployment. In this regard, the price operators will be willing to pay for 700 MHz spectrum will depend on them having already spectrum in the 800 MHz frequency band or not. However, since competition for the new spectrum will not be so strong, expected incomes from 700 MHz spectrum awards will be generally lower than those from the digital dividend, despite this spectrum being as valuable as 800 MHz spectrum for some operators. In the second place, regarding femtocell deployment, some conclusions can be drawn in terms of deployment cost savings and also with reference to the business model they enable. Savings provided by a joint macro-femto LTE network as compared to an exclusively macrocellular deployment increase as the available bandwidth for the macrocells decreases. Therefore, for a convergent operator the deployment of femtocells can only have economic sense if the available bandwidth is scarce (around 2x10 MHz), which might be the case of fix market operators which are new entrant in mobile market. Besides, open access models are interesting for exclusively mobile operators, since they make costs more flexible by substituting macrocell base stations by femtocells, but they need to be deployed relatively densely populated areas so that they can offload traffic from several macrocell users simultaneously. Nonetheless, femtocells are beneficial in all cases if the user assumes both femtocell and backhaul costs, which only seems probable if they are integrated in a business model commercializing new services. Therefore, in many of the cases analyzed femtocell deployment only makes sense if they increase revenues per user through new added value services which need from guaranteed quality of service, thus exploiting its main competitive advantage compared to WiFi. Finally, regarding the role of LTE technology in the provision of fixed wireless access services for 30 Mbps broadband, a TD-LTE model has been developed and a prospective study has been carried out through techno-economic methodology for the Spanish case. Obtained results foresee a FTTH coverage footprint of 74% households for 2020, and prove that a TD-LTE network in the 3.5 GHz band results feasible to increase 30 Mbps service coverage in additional 14 percentage points. To sum up, obtained results show LTE technology capability to address new challenges regarding both mobile traffic growth, particularly critical in urban zones, and the current digital divide in fast broadband access in most rural zones.

Linear adaptive channel equalization for multiuser MIMO-OFDM systems

Linear adaptive channel equalization using the least mean square (LMS) algorithm and the recursive least-squares(RLS) algorithm for an innovative multi-user (MU) MIMOOFDM wireless broadband communications system is proposed. The proposed equalization method adaptively compensates the channel impairments caused by frequency selectivity in the propagation environment. Simulations for the proposed adaptive equalizer are conducted using a training sequence method to determine optimal performance through a comparative analysis. Results show an improvement of 0.15 in BER (at a SNR of 16 dB) when using Adaptive Equalization and RLS algorithm compared to the case in which no equalization is employed. In general, adaptive equalization using LMS and RLS algorithms showed to be significantly beneficial for MU-MIMO-OFDM systems.