Project finance in Hungarian electricity sector. Effect of feed-in tariff system’s change onto power plant investments

The research analyses the former and the current status of the small gas-motor power plant investments in the Hungarian energy sector. It discusses the development of project financing in the segment and the major changes and effects of new regulations and subsidy-policy implemented in 2010. The objective of this paper is to present the results of an empirical research of the so called GCHP projects, and to draw conclusion concerning how classic project financing conditions were present and changed during the last decade, and how regulation affected the current and future financial status of these projects.

Cost-free feed-in tariffs for renewable energy deployment in Spain

Feed-in-tariff (FIT) schemes have been widely employed to promote renewable energy deployment. While FITs may be perceived by consumers as an extra cost, renewable energies cause a noticeable price reduction in wholesale electricity markets. We analyse both effects for the case of the Spanish electricity market during 2010. In particular, we examine the level of FITs that makes savings and extra costs to be similar on an hourly basis. Results are obtained for a wide range of renewable generation scenarios. It is found that FITs with null extra costs for consumers are in the range of 50–80 €/MWh. Some of the side-effects of a high penetration of renewable energy in the market are analysed in detail and discussed.

Renewable energies Driven by Feed-on Tariffs. Photovoltaic vs Wind Energy Development in Spain

Although others regulations regarding feed-in tariffs for photovoltaics (PV) existed in Spain previously, the one that meant a paradigm change was the introduction in 2007 of law R.D.661/2007 which established a feed-in tariff of 41,75 cents/kWh if the installed capacity was greater than 100KWp and 44,04 cents/kWh if it was smaller. The high level of the subsidies together with the lack of a limit for the total installed capacity originates the well-known Spanish photovoltaic boom. In September 2008 the installed PV capacity accounted for 3.2GWp (while the official objective stated in the national renewable roadmap was only 400MWp). To avoid this situation a new law, R.D. 1578/2008, was proclaimed which established a decreasing feed-in tariff of 32 cents/kWh (for ground installations) and 34 cents/kWh (for rooftops) and it limited the annual installed capacity to 500MWp. Although it was successful in limiting the PV subsidies total costs, the successive and sudden changes in regulations resulted very harmful to the local PV industry. In this article, the strong influence of feed-in tariff in the development of PV installed capacity and market evolution in Spain will be analyzed in detail. In addition, a comparison with other subsidized technologies which installed capacity has had a smoother evolution, as wind energy, will be presented.

Tracing the fate of N-15-enriched feed in an intensive shrimp system

The fate of N-15-nitrogen-enriched formulated feed fed to shrimp was traced through the food web in shallow, outdoor tank systems (1000 1) stocked with shrimp. Triplicate tanks containing shrimp water with and without sediment were used to identify the role of the natural biota in the water column and sediment in processing dietary nitrogen (N). A preliminary experiment demonstrated that N-15-nitrogen-enriched feed products could be detected in the food web. Based on this, a 15-day experiment was conducted. The ammonium (NH4+) pool in the water column became rapidly enriched (within one day) with N-15-nitrogen after shrimp were fed N-15-enriched feed. By day 15, 6% of the added N-15-nitrogen was in this fraction in the 'sediment' tanks compared with 0.4% in the 'no sediment' tanks. The particulate fraction in the water column, principally autotrophic nanoflagellates, accounted for 4-5% of the N-15-nitrogen fed to shrimp after one day. This increased to 16% in the 'no sediment' treatment, and decreased to 2% in the 'sediment' treatment by day 15. It appears that dietary N was more accessible to the phytoplankton community in the absence of sediment. The difference is possibly because a proportion of the dietary N was buried in the sediment in the 'sediment' treatment, making it unavailable to the phytoplankton. Alternatively, the dietary N was retained in the NH4+ pool in the water column since phytoplankton growth, and hence, N utilization was lower in the 'sediment' treatment. The lower growth of phytoplankton in the 'sediment' treatment appeared to be related to higher turbidity, and hence, lower light availability for growth. The percentage N-15-nitrogen detected in the sediment was only 6% despite the high capacity for sedimentation of the large biomass of plankton detritus and shrimp waste. This suggests rapid remineralization of organic waste by the microbial community in the sediment resulting in diffusion of inorganic N sources into the water column. It is likely that most of the dietary N will ultimately be removed from the tank system by water discharges. Our study showed that N-15-nitrogen derived from aquaculture feed can be processed by the microbial community in outdoor aquaculture systems and provides a method for determining the effect of dietary N on ecosystems. However, a significant amount of the dietary N was not retained by the natural biota and is likely to be present in the soluble organic fraction. (C) 2002 Elsevier Science B.V. All rights reserved.

Spatial multicriteria decision analysis for the siting of on-shore wind power in Kemiönsaari

Wind power is a low-carbon energy production form that reduces the dependence of society on fossil fuels. Finland has adopted wind energy production into its climate change mitigation policy, and that has lead to changes in legislation, guidelines, regional wind power areas allocation and establishing a feed-in tariff. Wind power production has indeed boosted in Finland after two decades of relatively slow growth, for instance from 2010 to 2011 wind energy production increased with 64 %, but there is still a long way to the national goal of 6 TWh by 2020. This thesis introduces a GIS-based decision-support methodology for the preliminary identification of suitable areas for wind energy production including estimation of their level of risk. The goal of this study was to define the least risky places for wind energy development within Kemiönsaari municipality in Southwest Finland. Spatial multicriteria decision analysis (SMCDA) has been used for searching suitable wind power areas along with many other location-allocation problems. SMCDA scrutinizes complex ill-structured decision problems in GIS environment using constraints and evaluation criteria, which are aggregated using weighted linear combination (WLC). Weights for the evaluation criteria were acquired using analytic hierarchy process (AHP) with nine expert interviews. Subsequently, feasible alternatives were ranked in order to provide a recommendation and finally, a sensitivity analysis was conducted for the determination of recommendation robustness. The first study aim was to scrutinize the suitability and necessity of existing data for this SMCDA study. Most of the available data sets were of sufficient resolution and quality. Input data necessity was evaluated qualitatively for each data set based on e.g. constraint coverage and attribute weights. Attribute quality was estimated mainly qualitatively by attribute comprehensiveness, operationality, measurability, completeness, decomposability, minimality and redundancy. The most significant quality issue was redundancy as interdependencies are not tolerated by WLC and AHP does not include measures to detect them. The third aim was to define the least risky areas for wind power development within the study area. The two highest ranking areas were Nordanå-Lövböle and Påvalsby followed by Helgeboda, Degerdal, Pungböle, Björkboda, and Östanå-Labböle. The fourth aim was to assess the recommendation reliability, and the top-ranking two areas proved robust whereas the other ones were more sensitive.

CFD modeling of dispersion water feed in wastewater cleaning application

Fluid particle breakup and coalescence are important phenomena in a number of industrial flow systems. This study deals with a gas-liquid bubbly flow in one wastewater cleaning application. Three-dimensional geometric model of a dispersion water system was created in ANSYS CFD meshing software. Then, numerical study of the system was carried out by means of unsteady simulations performed in ANSYS FLUENT CFD software. Single-phase water flow case was setup to calculate the entire flow field using the RNG k-epsilon turbulence model based on the Reynolds-averaged Navier-Stokes (RANS) equations. Bubbly flow case was based on a computational fluid dynamics - population balance model (CFD-PBM) coupled approach. Bubble breakup and coalescence were considered to determine the evolution of the bubble size distribution. Obtained results are considered as steps toward optimization of the cleaning process and will be analyzed in order to make the process more efficient.

The adoption of advanced feed-in tariffs in Ontario : a case of institutional layering

En mai 2009, l’Ontario a adopté la Loi sur l’énergie verte et devint ainsi la première juridiction en Amérique du Nord à promouvoir l’énergie renouvelable par le biais de tarifs de rachat garantis. En novembre 2010, dans son Plan énergétique à long terme, la province s’est engagée à déployer 10,700 MW en capacité de production d’énergie renouvelable non-hydroélectrique par 2018. Il s’agit de la cible de déploiement la plus élevée dans ce secteur au Canada. Les infrastructures de production et de distribution d’électricité comprennent des coûts d’installation élevés, une faible rotation des investissements et de longs cycles de vie, facteurs qui servent habituellement à ancrer les politiques énergétiques dans une dynamique de dépendance au sentier. Depuis le début des années 2000, cependant, l’Ontario a commencé à diverger de sa traditionnelle dépendance aux grandes centrales hydroélectriques, aux centrales à charbon et aux centrales nucléaires par une série de petits changements graduels qui feront grimper la part d’énergie renouvelable dans le mix énergétique provincial à 15% par 2018. Le but de ce mémoire est d’élucider le mécanisme de causalité qui a sous-tendu l’évolution graduelle de l’Ontario vers la promotion de l’énergie renouvelable par le biais de tarifs de rachat garantis et d’une cible de déploiement élevée. Ce mémoire applique la théorie du changement institutionnel graduel de Mahoney et Thelen au cas du développement de politiques d’énergie renouvelable en Ontario afin de mieux comprendre les causes, les modes et les effets du changement institutionnel. Nous découvrons que le contexte canadien de la politique énergétique favorise la sédimentation institutionnelle, c’est-à-dire un mode changement caractérisé par de petits gains favorisant l’énergie renouvelable. Ces gains s’accumulent pourtant en transformation politique importante. En Ontario, la mise sur pied d’une vaste coalition pour l’énergie renouvelable fut à l’origine du changement. Les premiers revendicateurs de politiques favorisant l’énergie renouvelable – les environnementalistes et les premières entreprises d’approvisionnement et de service en technologies d’énergie renouvelable – ont dû mettre sur pied un vaste réseau d’appui, représentant la quasi-totalité de la société ontarienne, pour faire avancer leur cause. Ce réseau a fait pression sur le gouvernement provincial et, en tant que front commun, a revendiqué l’énergie renouvelable non seulement comme solution aux changements climatiques, mais aussi comme solution à maints autres défis pressants de santé publique et de développement économique. La convergence favorable d’un nombre de facteurs contextuels a certes contribué à la réussite du réseau ontarien pour l’énergie renouvelable. Cependant, le fait que ce réseau ait trouvé des alliés au sein de l’exécutif du gouvernement provincial s’est révélé d’importance cruciale quant à l’obtention de politiques favorisant l’énergie renouvelable. Au Canada, les gouvernements provinciaux détiennent l’ultime droit de veto sur la politique énergétique. Ce n’est qu’en trouvant des alliés aux plus hauts échelons du gouvernement que le réseau ontarien pour l’énergie renouvelable a pu réussir.

Proposta de optimização do modelo feed-in português: Comparação dos modelos português, espanhol e alemão

Portugal, no intuito de alcançar as metas ambientais (nacionais e internacionais) a que se propôs, e de reduzir a dependência das importações de energia, tem aumentado o investimento em electricidade produzida a partir de energias renováveis (FER-E). Apesar do consenso em torno da sua utilização, as energias renováveis deparam-se com barreiras de várias ordens que dificultam a sua difusão no mercado. A actuação do Estado neste enquadramento passa por criar modelos de promoção da FER-E que atendam a que o custo energético é suportado pela sociedade. A maioria dos países da União Europeia, incluindo Portugal, aplica as tarifas feed-in (FIT) como instrumento central de suporte à FER-E, inserido num modelo de apoio que contempla outros parâmetros de design considerado críticos para o seu sucesso. A presente dissertação tem como objectivo a apresentação de uma proposta de optimização do actual modelo feed-in português, inspirada nos modelos espanhol e alemão. Pretende-se chegar a uma solução que permita conciliar os incentivos dos investidores com soluções sustentáveis de longo prazo, procurando garantir uma maximização do excedente social, e um aumento da equidade.

Technical note: A proposed method to determine the extent of degradation of a feed in the rumen from the degradation profile obtained with the in vitro gas production technique using feces as the inoculum

A method is proposed to determine the extent of degradation in the rumen involving a two-stage mathematical modeling process. In the first stage, a statistical model shifts (or maps) the gas accumulation profile obtained using a fecal inoculum to a ruminal gas profile. Then, a kinetic model determines the extent of degradation in the rumen from the shifted profile. The kinetic model is presented as a generalized mathematical function, allowing any one of a number of alternative equation forms to be selected. This method might allow the gas production technique to become an approach for determining extent of degradation in the rumen, decreasing the need for surgically modified animals while still maintaining the link with the animal. Further research is needed before the proposed methodology can be used as a standard method across a range of feeds.

Importance of mycotoxins in food and feed in India

Various food and feed samples including groundnut seed, maize, sorghum, soyabean cake, groundnut cake, cotton cake, poultry feed, buffalo milk, cow milk and milk powders were collected from farmers' fields, farmer's stores, oil millers storage, traders' storage, retail shops and supermarkets. More than 2000 samples were analysed by ELISA and most of the commodities, with the exception of sorghum seed, contained high levels of aflatoxin. Groundnut cake was one of the major cattle feed ingredients in the peri-urban area of Hyderabad (Andhra Pradesh, India) and >75% of the samples contained >100 µg/kg aflatoxin, leading to a high level of aflatoxin M1, in milk samples. Strategies to reduce aflatoxin levels (especially in groundnut) by management interventions at preharvest, harvest and storage, are discussed.

Design and assessment of a large commercial Photovoltaic System in Barbados

One of the main aims of this thesis is to design an optimized commercial Photovoltaic (PV) system in Barbados from several variables such as racking type, module type and inverter type based on practicality, technical performance as well as financial returns to the client. Detailed simulations are done in PVSYST and financial models are used to compare different systems and their viability. Once the preeminent system is determined from a financial and performance perspective a detailed design is done using PVSYST and AutoCAD to design the most optimal PV system for the customer. In doing so, suitable engineering drawings are generated which are detailed enough for construction of the system. Detailed cost with quotes from relevant manufacturers, suppliers and estimators become instrumental in determining Balance of System Costs in addition to total project cost. The final simulated system is suggested with a PV capacity of 425kW and an inverter output of 300kW resulting in an array oversizing of 1.42. The PV system has a weighted Performance Ratio of 77 %, a specific yield of 1467 kWh/kWp and a projected annual production of 624 MWh/yr. This system is estimated to offset approximately 28 % of Carlton’s electrical load annually. Over the course of 20 years the PV system is projected to produce electricity at a cost of $0.201USD/kWh which is significantly lower than the $0.35 USD/kWh paid to the utility at the time of writing this thesis. Due to the high cost of electricity on the island, an attractive Feed-In-Tariff is not necessary to warrant the installation of a commercial System which over a lifetime which produces electricity at less than 60% of the cost to the user purchasing electricity from the utility. A simple payback period of 5.4 years, a return on investment of 17 % without incentives, in addition to an estimated diversion of 6840 barrels of oil or 2168 tonnes of CO2 further provides compelling justification for the installation of a commercial Photovoltaic System not only on Carlton A-1 Supermarket, but also island wide as well as regionally where most electricity supplies are from imported fossil fuels.

Solar PV Powered Air Conditioner Analysis for an Office/Classroom in a Tropical Climate

This thesis focuses on using photovoltaic produced electricity to power air conditioners in a tropical climate. The study takes place in Surabaya, Indonesia at two different locations the classroom, located at the UBAYA campus and the home office, 10 km away. Indonesia has an average solar irradiation of about 4.8 kWh/m²/day (PWC Indonesia, 2013) which is for ideal conditions for these tests. At the home office, tests were conducted on different photovoltaic systems. A series of measuring devices recorded the performance of the 800 W PV system and the consumption of the 1.35 kW air conditioner (cooling capacity). To have an off grid system many of the components need to be oversized. The inverter has to be oversized to meet the startup load of the air conditioner, which can be 3 to 8 times the operating power (Rozenblat, 2013). High energy consumption of the air conditioner would require a large battery storage to provide one day of autonomy. The PV systems output must at least match the consumption of the air conditioner. A grid connect system provides a much better solution with the 800 W PV system providing 80 % of the 3.5 kWh load of the air conditioner, the other 20 % coming from the grid during periods of low irradiation. In this system the startup load is provided by the grid so the inverter does not need to be oversized. With the grid-connected system, the PV panel’s production does not need to match the consumption of the air conditioner, although a smaller PV array will mean a smaller percentage of the load will be covered by PV. Using the results from the home office tests and results from measurements made in the classroom. Two different PV systems (8 kW and 12 kW) were simulated to power both the current air conditioners (COP 2.78) and new air conditioners (COP 4.0). The payback period of the systems can vary greatly depending on if a feed in tariff is awarded or not. If the feed in tariff is awarded the best system is the 12 kW system, with a payback period of 4.3 years and a levelized cost of energy at -3,334 IDR/kWh. If the feed in tariff is not granted then the 8 kW system is the best choice with a lower payback period and lower levelized cost of energy than the 12 kW system under the same conditions.

The use of extruded feed in fish food

In our country, the intensive culture of fish has been making progress due to the availability of extruded rations, which are characterized by the way they have been formulated to assist the nutritional demands of the tropical species and for facilitating a better practice of alimentary handling. This process checks the extruded product density and the desirable physical/chemical aspects to a diet that should be handled in the water, the critical factor of this activity. It is important to emphasize that this product stays to the surface of the water, facilitates the consumption control and the observation of the general aspects of the school of fish, as well as guaranteeing that no deterioration of the physical/chemical characteristics of the water occurs. The floating characteristic of the extruded ration is preferable for farmers because most of the tropical species feed at the surface of the water. In some cases, in the function of the alimentary habit, the thermal conditions of the water and the handling system produce granules with different densities. This is due to the humidity and the applied cooking heat, which modifies the time of hydration, and consequently the ability to float. To establish the physical presentation idea for a ration for tropical fishes, it is necessary that the pellets come in sizes, textures, humidities and densities in order to allow for the different phases of the lives of the fishes. This ration should be the result of characteristics of the species, such as the anatomophysiologics particularities, alimentary habits, digestive capacity and alimentary behavior. Only in this way is it possible to offer to those fishes a ration whose nutritious value and physical presentation facilitate the best biological and economic answers.Those aspects need to be reviewed because the tropical species that are cultivated in our country present selective behavior in relation to the size of the pellet. Generally, this has access to the digestive system without waste; the digestibility, therefore, is dependent upon the size of the particles and the physical aspects of the pellets. They should still consider that those granules could be less abrasive and softer. The extruded rations available in the national market present a qualitative reference to its proteic level, whose consequence allows us to infer that those are overestimated for the final phase of those fishes. Thus, the final cost of production is made unfeasible. In this point of view of the development of the national fish culture, and the growing adoption of the intensive system of production, it can link that such progress is a function of the availability of the rations in the extruded form. Although this technique of processing of rations has revolutionized the market in such a way that has been seen as preferable for farmers, some feel that there is a lack of products best suited for the initial phases of fingerlings production.

The first renewable forward market mechanisms in the Iberian Electricity Market

A description of the first renewable forward market mechanisms in the Iberian Electricity Market is provided. A contract for difference mechanism is available in Spain since March 2011between the last resort suppliers and the special regime (renewables and cogeneration) settling the price differences between the equilibrium price of the forward regulated auctions for the last resort supply and the spot price of the corresponding delivery period. Regulated auctions of baseload futures of the Portuguese zone in which the Portuguese last resort supplier sells the special regime production exist since December 2011. The experience gained from renewables auctions in Latin America could be used in the Iberian Electricity market, complementing these first market mechanisms. Introduction of renewable auctions at least for the most mature technologies (i.e. wind) in Spain and Portugal providing a fair price for the renewable generation will be of utmost importance in the short term to diminish the tariff deficit caused by the massive deployment of the feed-in-tariff scheme. Liquidity in the forward markets will also increase as a result of the entry of renewable generation companies intending to maximize their profits due to gradual suppression of feed in tariff schemes.

Diffusion of photovoltaic in Germany: policy vs. consumers

In some countries photovoltaic (PV) technology has already achieved a stage of development at which it can compete with conventional electricity sources. Germany provides a good illustration of this where PV market has reached a mature stage. As a manifest of this, the German government has recently reduced subsidies for households and industry by decreasing the feed in tariff for PV. This development raises fundamental questions: could the PV industry survive? Will consumers be motivated to continue to adopt PV when feed-in tariff diminish? The point of departure for the relevant literature on diffusion of PV has been on the effect of subsidies but little attention has paid to consumer motives when the policy support is scaled down. This paper introduces an in-depth analysis on understanding the consumer motives for adopting photovoltaic applications. Anchored in an extensive exploratory case study on PV consumers and PV system providers, this study aims to provide an encompassing explanation of diffusion of PV by revealing the link between consumer motives and the impact of policy.