La texture et la granulométrie de la moulée influencent les concentrations d’acide propionique et butyrique de même que la prévalence d’Escherichia coli dans le tractus gastro-intestinal du porc d’engraissement

Certaines stratégies alimentaires sont actuellement considérées pour remplacer l’usage des antimicrobiens dans les fermes porcines. Les objectifs de cette étude étaient d'évaluer l'effet de la granulométrie et de la texture des aliments sur les concentrations d'acides gras volatils intestinaux, la composition des populations pathogènes et commensales d’E. coli et sur les performances de croissance des porcs. Des porcs d'engraissement (n= 840) ont reçu l'une des six diètes suivantes: moulée texturée 500, 750 et 1250 µm et moulée cubée 500, 750 et 1250 µm. Le gain de poids a été mesuré à chaque changement de formulation de moulée. À l'abattoir, les contenus du caecum et du côlon de 165 porcs ont été échantillonnés pour le dénombrement des E. coli par PCR quantitatif (qPCR) et pour la quantification des AGV. Le gène yccT a été utilisé pour dénombrer les E. coli totaux. Une diminution du taux de conversion alimentaire a été associée avec la moulée cubée et/ou la moulée de 500 µm. Les concentrations d’acide propionique et butyrique, et ce tant au niveau du caecum que du côlon, étaient plus élevées chez les porcs recevant de la moulée texturée que chez ceux recevant de la moulée cubée. Du point de vue de la granulométrie, les concentrations caecales et du côlon d’acide butyrique étaient plus élevées chez les porcs alimentés avec de la moulée de 1250 µm que chez ceux recevant de la moulée de 500 µm. D'autre part, les niveaux intestinaux d’E. coli totaux étaient plus élevés pour les porcs nourris avec de la moulée cubée que pour ceux ayant reçu de la moulée texturée. Les résultats ont montré que la moulée texturée est associée à des performances de croissance plus faibles mais à des changements intestinaux favorables.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothane positive – nn –, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5 days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1 hour on rough roads). Individual feed intake was recorded during the 5-d treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2 kg/d was significantly different among diets (P&0.05; Control: 8.7 %; Mg&Trp: 43.5 %; Trp: 17.4 %) and they were considered to have inadequate supplement intake. During the ante mortem period, 15.2 % of pigs included in the experiment died, and this percentage decreased to 8.7 % in those pigs with a feed intake & 2kg/day, all of them from the stress-sensitive pigs (nn). In general, no differences were observed in the behaviour of pigs along the corridor leading to the stunning system and inside the CO2 stunning system. During the stunning procedure, Trp diet showed shorter periods of muscular excitation than control and Mg&Trp diets. The combination of a stressful ante mortem treatment and Mg&Trp supplementation led to carcasses with high incidence of severe skin lesions. Different meat quality results were found when considering all pigs or considering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P&0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and exudative (DFD) traits in SM muscle (P&0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0 % of the SM muscles from nn pigs were classified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P&0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended.

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothanepositive – nn-, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1h on rough roads). Individual feed intake was recorded during the 5-day treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2kg/day was significantly different among diets (P<0.05; Control: 8.7%; Mg&Trp: 43.5%; Trp:17.4%) and they were considered to have inadequate supplement intake. During the antemortem period, 15.2% of pigs included in the experiment died, and this percentagedecreased to 8.7% in those pigs with a feed intake > 2kg/day, all of them from thestress-sensitive pigs (nn). In general, no differences were observed in the behaviour ofpigs along the corridor leading to the stunning system and inside the CO2 stunningsystem. During the stunning procedure, Trp diet showed shorter periods of muscularexcitation than control and Mg&Trp diets. The combination of a stressful ante mortemtreatment and Mg&Trp supplementation led to carcasses with high incidence of severeskin lesions. Different meat quality results were found when considering all pigs orconsidering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P<0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and dry (DFD) traits in SM muscle (P<0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0% of the SM muscles from nn pigs wereclassified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P<0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothane positive – nn-, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5 days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1h on rough roads). Individual feed intake was recorded during the 5-day treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2kg/day was significantly different among diets (P<0.05; Control: 8.7%; Mg&Trp: 43.5%; Trp: 17.4%) and they were considered to have inadequate supplement intake. During the ante mortem period, 15.2% of pigs included in the experiment died, and this percentage decreased to 8.7% in those pigs with a feed intake > 2kg/day, all of them from the stress-sensitive pigs (nn). In general, no differences were observed in the behaviour of pigs along the corridor leading to the stunning system and inside the CO2 stunning system. During the stunning procedure, Trp diet showed shorter periods of muscular excitation than control and Mg&Trp diets. The combination of a stressful ante mortem treatment and Mg&Trp supplementation led to carcasses with high incidence of severe skin lesions. Different meat quality results were found when considering all pigs or considering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P<0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and dry (DFD) traits in SM muscle (P<0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0% of the SM muscles from nn pigs were classified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P<0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended

Vitamin E supplementation, cereal feed type and consumer sensory perceptions of poultry meat quality

Lipid oxidation leads to meat spoilage and has been reported to cause adverse changes in the flavour and texture of poultry meat. Vitamin E has been found to be effective in delaying lipid oxidation. The aim of this study was to determine whether the vitamin E supplementation of chicken feed influences the consumers' perception of the quality of chicken meat under normal display and storage conditions. Untrained consumers (n 32) evaluated cooked breast meat from chickens (both corn fed and wheat fed) supplemented with 75 250 or 500 mg/kg vitamin E and after storage at 4&DEG; C for 4 and 7 d. Factorial analysis found an interaction between vitamin E treatment and storage day upon the perceived juiciness (P = 0.023) and tenderness (P = 0.041) of the chicken meat. Perceptions of quality relative to vitamin E level were more evident on day 4 than day 7. When the two cereal types were compared, the time-related subgroup effects were observed only in meat from corn-fed chickens supplemented with either 75 or 250 mg/kg, which was perceived to be juicier (P = 0.018) and more tender (P = 0.020) than that supplemented at the 500 mg/kg level. These results imply that the two lower concentrations of vitamin E have some advantages over 500 mg/kg, but for optimal consumer acceptance of corn-fed chicken meat, we suggest that 250 mg/kg vitamin E should be added to corn-fed poultry feed. There was no evidence to suggest any advantages in changing the current amount of vitamin E (75 mg/kg) used to rear wheat-fed birds.

Corn texture and particle size in broiler diets

The objective of this study was to evaluate the effect of corn texture and the particle size on broiler performance, carcass yield, nutrient digestibility, and digestive organ morphometrics. In Experiment I, 720 male Cobb chicks were distributed in a completely randomized experimental design with a 2 x 3 factorial arrangement, consisting two corn textures (dented and hard) and three corn particle sizes, was applied, with four replicates of 30 birds each. Corn particle size was classified according to geometric mean diameter (GMD) as fine - 0.46 mm; medium - 0.73 mm, and coarse - 0.87 mm. In Experiment II, 120 broiler chicks were used to evaluate corn digestibility during the periods of 16 to 22 days and 35 to 41 days of age, using the method of total excreta collection. In Experiment I, corn particle size influenced body weight, average weight gain, feed intake and feed conversion ratio of 21-day-old birds. Corn texture and particle size did not affect the performance of 42-day-old broilers or carcass traits. In Experiment II, there was no influence of corn texture and particle size on digestive organ weights. Dented corn increased nitrogen excretion in the first trial, and hard corn improved dry matter digestibility in the second metabolic trial. Corn with fine particle size promotes better performance of broilers at 21 days of age. Hard corn results in higher dry matter digestibility and lower nitrogen excretion, and consequently higher production factor in 42-day-old broilers.

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Corn grits that were supplemented with isovaleraldehyde, ethyl butyrate, butyric acid and flavour enhancers were extruded under different processing conditions. Volatile compounds retained in the extrudates were isolated by dynamic headspace and analysed using gas chromatographymass spectrometry. The expansion ratio, density and cut force to break down the extrudates were evaluated and aroma intensity was assessed using a multisample difference test. Butyric acid showed the greatest retention (96.4%), regardless of the extrusion conditions. All compounds were better retained when samples were extruded at 20% feed moisture and 90 degrees C processing temperature (2.981.0%), conditions that also resulted in greater aromatic intensity (moderate to moderate-strong intensity). The addition of volatile compounds reduced the expansion ratio and cut force, whereas the addition of flavour enhancers increased the expansion ratio but reduced ethyl butyrate and butyric acid retention.

Evaluation of texture features in hepatic tissue characterization from non-enhanced CT images

Aim of this paper is to evaluate the diagnostic contribution of various types of texture features in discrimination of hepatic tissue in abdominal non-enhanced Computed Tomography (CT) images. Regions of Interest (ROIs) corresponding to the classes: normal liver, cyst, hemangioma, and hepatocellular carcinoma were drawn by an experienced radiologist. For each ROI, five distinct sets of texture features are extracted using First Order Statistics (FOS), Spatial Gray Level Dependence Matrix (SGLDM), Gray Level Difference Method (GLDM), Laws' Texture Energy Measures (TEM), and Fractal Dimension Measurements (FDM). In order to evaluate the ability of the texture features to discriminate the various types of hepatic tissue, each set of texture features, or its reduced version after genetic algorithm based feature selection, was fed to a feed-forward Neural Network (NN) classifier. For each NN, the area under Receiver Operating Characteristic (ROC) curves (Az) was calculated for all one-vs-all discriminations of hepatic tissue. Additionally, the total Az for the multi-class discrimination task was estimated. The results show that features derived from FOS perform better than other texture features (total Az: 0.802+/-0.083) in the discrimination of hepatic tissue.

Simple texture-based liberation modelling of ores

Mineralogical analysis is often used to assess the liberation properties of particles. A direct method of estimating liberation is to actually break particles and then directly obtain liberation information from applying mineralogical analysis to each size-class of the product. Another technique is to artificially apply random breakage to the feed particle sections to estimate the resultant distribution of product particle sections. This technique provides a useful alternative estimation method. Because this technique is applied to particle sections, the actual liberation properties for particles can only be estimated by applying stereological correction. A recent stereological technique has been developed that allows the discrepancy between the linear intercept composition distribution and the particle section composition distribution to be used as guide for estimating the particle composition distribution. The paper will show results validating this new technique using numerical simulation. (C) 2004 Elsevier Ltd. All rights reserved.

Culturable Bacterial Diversity From A Feed Water Of A Reverse Osmosis System, Evaluation Of Biofilm Formation And Biocontrol Using Phages.

Biofilm formation on reverse osmosis (RO) systems represents a drawback in the application of this technology by different industries, including oil refineries. In RO systems the feed water maybe a source of microbial contamination and thus contributes for the formation of biofilm and consequent biofouling. In this study the planktonic culturable bacterial community was characterized from a feed water of a RO system and their capacities were evaluated to form biofilm in vitro. Bacterial motility and biofilm control were also analysed using phages. As results, diverse Protobacteria, Actinobacteria and Bacteroidetes were identified. Alphaproteobacteria was the predominant group and Brevundimonas, Pseudomonas and Mycobacterium the most abundant genera. Among the 30 isolates, 11 showed at least one type of motility and 11 were classified as good biofilm formers. Additionally, the influence of non-specific bacteriophage in the bacterial biofilms formed in vitro was investigated by action of phages enzymes or phage infection. The vB_AspP-UFV1 (Podoviridae) interfered in biofilm formation of most tested bacteria and may represent a good alternative in biofilm control. These findings provide important information about the bacterial community from the feed water of a RO system that may be used for the development of strategies for biofilm prevention and control in such systems.

Effect of glutamate and inosinate on sensory and instrumental texture of extruded products

Expanded products have been developed by extrusion of non-conventional highly nutritious raw materials such as amaranth and chickpea blended with bovine lung. As sensory acceptance of these snacks is restricted, this study aimed at improving their texture, through the addition of monosodium glutamate (MSG) and disodium inosinate (IMP) flavor enhancers to the feeding material, or to the flavor added after the extrusion. Sensory and mechanical analyses showed that both enhancers affected texture, assessed by sensory and instrumental methods. Addition of IMP together with MSG to the chickpea-based snacks presented the best results. This beneficial effect was not observed in the amaranth-based snack, suggesting that IMP and MSG can favorably impact texture of extruded products depending on the amount and type of protein present

Evolution of magnetic properties and crystallographic texture in electrical steel with large plastic deformation

Deformation leads to a hardening of steel due to an increase in the density of dislocations and a reduction in their mobility, giving rise to a state of elevated residual stresses in the crystal lattice. In the microstructure, one observes an increase in the contribution of crystalline orientations which are unfavorable to the magnetization, as seen, for example, by a decrease in B(50), the magnetic flux density at a field of 50 A/cm. The present study was carried out with longitudinal strips of fully processed non-oriented (NO) electrical steel, with deformations up to 70% resulting from cold rolling in the longitudinal direction. With increasing plastic deformation, the value of B(50) gradually decreases until it reaches a minimum value, where it remains even for larger deformations. On the other hand, the coercive field H(c) continually increases. Magnetometry results and electron backscatter diffraction results are compared and discussed. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3560895]