Exigência de lisina para mantença determinada com galos de diferentes genótipos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling energy utilization in broiler breeders, laying hens and broilers

The factorial approach has been used to partition the energy requirements into maintenance, growth, and production. The coefficients determined for these purposes can be used to elaborate energy requirement models. These models consider the body weight, weight gain, egg production, and environmental temperature to determine the energy requirements for poultry. Predicting daily energy requirement models can help to establish better and more profitable feeding programs for poultry. Studies were conducted at UNESP-Jaboticabal to determine metabolizable energy (ME) requirement models for broiler breeders, laying hens, and broilers. These models were evaluated in performance trials and provided good adjustments. Therefore, they could be used to establish nutritional programs. This review aims to outline the results found at UNESP studies and to show the application of models in nutritional programs for broiler breeders, laying hens, and broilers.

Estimativas das exigências de lisina de frangos de corte pelos métodos dose resposta e fatorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelling energy utilization in poultry

Models of daily energy requirement can help to establish better and more profitable feeding programs for poultry. Studies have been conducted at UNESP-Jaboticabal-Brazil with the aim of studying energy utilization in broiler breeders, laying hens, and broilers, and to establish metabolisable energy requirement models. The factorial approach was used to partition the energy requirements into maintenance, growth, and production components. The resulting models consider body weight, weight gain, egg production, and environmental temperature for the determination of the energy requirements of poultry. These models were evaluated in performance trials and provided good estimates. Therefore, they can be used to establish nutritional programs. The aim of this chapter is to describe the development of these models and to outline the results of our studies at UNESP.

Model to estimate lysine requirements of broilers

The purpose of this study is to describe the development of a model to predict the digestible lysine requirements of broilers using the factorial approach, and to evaluate the model using as reference the model presented in Brazilian Tables for Poultry and Swine. The model partitions the requirement for maintenance and growth for feather-free body protein and feather protein, in which the inputs are body and feather protein weight and the daily rates of protein deposition in the feather-free body and feathers. The parameters that express the lysine requirement for maintenance were obtained in metabolism trials with roosters, and those for the efficiency of lysine utilization in experiments with broilers from 1 to 42 d. Based on these results the model proposed was: Lys (mg/d) = [(151xBP(m)(-0.27)xBP(t)) + (0.01xP(t)x18)] + [(75xBPD/0.77) + (18xFPD/0.77)], where Lys = digestible lysine requirement (mg/d), BPm=body protein weight at maturity (kg), BPt=body protein weight at time t (kg), FPt=feather protein weight at time t (kg), BPD=body protein deposition (g/d), FPD = feather protein deposition (g/d). The model yields sensible predictions of the digestible lysine requirements of broilers of different strains and ages growing at their potential, and suggests a lower lysine requirement after 27 d than does the Brazilian model. The proposed model is the first step in the development of a simulation model that predicts the food intake of a broiler and hence the dietary amino acid content that would optimise performance.

Energy requirements for growth of pubertal female Saanen goats

Previous research on energy requirements of female Saanen goats, using the factorial approach, has not considered the specific requirements for maintenance and growth during the pubertal phase. Thus, the purpose of this study was to estimate energy requirements for maintenance (Trial 1) and growth (Trial 2) of non-pregnant and non-lactating female Saanen goats at the pubertal phase from 30 to 45 kg. In Trial 1, the net energy requirements for maintenance (NEm ) were estimated using 18 female Saanen goats randomly assigned to three levels of intake: ad libitum, and 70% and 40% of ad libitum intake. These animals were pair-fed in six slaughter groups, each consisting of one animal for each level of intake. In Trial 2, the net energy requirements for growth (NEg ) were estimated using 18 female Saanen goats, which were fed ad libitum and slaughtered at targeted BW of 30, 38 and 45 kg. The NEm was 52 kcal/kg(0.75) of BW. The NEg increased from 3.5 to 4.7 Mcal/kg of BW gain as BW increased from 30 to 45 kg. Our results suggest that the guidelines of the major feeding systems for the entire growth phase may not be adequate for females at pubertal phase.

Evaluating relative impact of virtual reality system variables on architectural design comprehension and presence - A variable-centered approach using fractional factorial experiment

The relative contributions of five variables (Stereoscopy, screen size, field of view, level of realism and level of detail) of virtual reality systems on spatial comprehension and presence are evaluated here. Using a variable-centered approach instead of an object-centric view as its theoretical basis, the contributions of these five variables and their two-way interactions are estimated through a 25-1 fractional factorial experiment (screening design) of resolution V with 84 subjects. The experiment design, procedure, measures used, creation of scales and indices, results of statistical analysis, their meaning and agenda for future research are elaborated.

Liquid-liquid extraction by mixed micellar systems: A new approach for clavulanic acid recovery from fermented broth

This work is the first attempt to apply aqueous two-phase mixed micellar systems (ATPMS) of the nonionic surfactant Triton X-114 and the anionic one AOT to extract clavulanic acid (CA) from broth fermented by Streptomyces clavuligerus. Cloud points were determined in McIlvane buffer pH 6.5 with or without NaCl, and diagram phases/coexistence curves were constructed. CA partition was investigated following a 2(4)-full factorial design in which AOT (0.022, 0.033 and 0.044% w/w), Triton X-114 (1.0, 3.0 and 5.0% w/w) and NaCl (0, 2.85 and 5.70% w/w) concentrations and temperature (24,26 and 28 degrees C) were selected as independent variables, and CA partition coefficient (K(CA)) and yield in the top phase (eta(CA)) as responses. CA partitioned always to the top, micelle-poor phase. The regression analysis pointed out that NaCl concentration and interaction between temperature and Triton X-114 concentration had statistically significant effects on K(CA), while eta(CA) was mainly influenced by temperature, Triton X-114 concentration and their interaction. Different ATPMS compositions were then needed to maximize these responses, specifically 0.022% (w/w) AOT, 5% (w/w) Triton X-114 for K(CA) (2.08), and 0.044% (w/w) AOT, 1% (w/w) Triton X-114 for eta(CA) (98.7%), both at 24 degrees C without NaCl. Since at 0.022% (w/w) AOT, 1% (w/w) Triton X-114 and 28 degrees C without NaCl the system was able to ensure satisfactory intermediate results (K(CA) = 1.48; eta(CA) = 86.3%), these conditions were selected as the best ones. These preliminary results are of concern for possible industrial application, because CA partition to the dilute phase can simplify the subsequent purification protocol. (C) 2011 Elsevier B.V. All rights reserved.

The Analysis of Accounting Multipliers: The NAMEA Approach in the Case of Catalonia

The aim of this paper is the analysis of the Catalan economy (2001) with the use of a National Accounting Matrix with environmental accounts (NAMEA) for the Catalan economy with 2001 data. We will focus on the analysis of the emission multipliers and we will also analyse the impact of a 10% reduction in greenhouse emissions on emission multipliers. This emission-reduction percentage would bring the Catalan economy into compliance with the maximum emissions level allowed by the Kyoto Protocol. We consider three possible scenarios that would allow this goal to be met. First, we will simulate a 10% reduction in regional emissions and a 5% drop in the endogenous income of the multipliers' model (production, factorial and private income). Second, we will simulate a 10% reduction in emissions and a 10% increase in endogenous income. Finally, we will simulate a 10% reduction in emissions and a 5% increase in endogenous income. Additionally, we will analyse the decomposition of the emission multipliers into own effects, open effects and circular effects to capture the different channels of the emission generation process. Keywords: NAMEA, emission multipliers, Kyoto Protocol.

A statistical approach to define some tofu processing conditions

The aim of this work was to make tofu from soybean cultivar BRS 267 under different processing conditions in order to evaluate the influence of each treatment on the product quality. A fractional factorial 2(5-1) design was used, in which independent variables (thermal treatment, coagulant concentration, coagulation time, curd cutting, and draining time) were tested at two different levels. The response variables studied were hardness, yield, total solids, and protein content of tofu. Polynomial models were generated for each response. To obtain tofu with desirable characteristics (hardness ~4 N, yield 306 g tofu.100 g-1 soybeans, 12 g proteins.100 g-1 tofu and 22 g solids.100 g-1 tofu), the following processing conditions were selected: heating until boiling plus 10 minutes in water bath, 2% dihydrated CaSO4 w/w, 10 minutes coagulation, curd cutting, and 30 minutes draining time.

Soursop juice stabilized with soy fractions: a rheologial approach

The potential use of soybean soluble polysaccharide (SSPS) as a stabilizer in acidic beverages was evaluated using rheological and stability studies. For this purpose, soy-based beverages were formulated with soy protein isolate (SPI) and soursop juice due to the low stability of this kind of dispersion. The influences of the concentrations of soybean soluble polysaccharide, calcium chloride, and soy protein isolate on the stability and rheology of soursop juice were evaluated using a factorial experimental design. Interactions between the concentrations of soybean soluble polysaccharide and soy protein isolate exerted a positive effect on the maximum Newtonian viscosity. The stability was positively influenced by the soybean soluble polysaccharide and soy protein isolate concentrations, but the interactions between soy protein isolate and CaCl2 also affected the sedimentation index. These results suggest that soybean soluble polysaccharide is effective in stabilizing fibers and proteins in acidic suspensions due to the increase in viscosity and steric effect caused by the formation of complexes between the soybean soluble polysaccharide and soy protein isolate.

Reduction capability of soil humic substances from the Rio Negro basin, Brazil, towards Hg(II) studied by a multimethod approach and principal component analysis (PCA)

This paper characterizes humic substances (HS) extracted from soil samples collected in the Rio Negro basin in the state of Amazonas, Brazil, particularly investigating their reduction capabilities towards Hg(II) in order to elucidate potential mercury cycling/volatilization in this environment. For this reason, a multimethod approach was used, consisting of both instrumental methods (elemental analysis, EPR, solid-state NMR, FIA combined with cold-vapor AAS of Hg(0)) and statistical methods such as principal component analysis (PCA) and a central composite factorial planning method. The HS under study were divided into groups, complexing and reducing ones, owing to different distribution of their functionalities. The main functionalities (cor)related with reduction of Hg(II) were phenolic, carboxylic and amide groups, while the groups related with complexation of Hg(II) were ethers, hydroxyls, aldehydes and ketones. The HS extracted from floodable regions of the Rio Negro basin presented a greater capacity to retain (to complex, to adsorb physically and/or chemically) Hg(II), while nonfloodable regions showed a greater capacity to reduce Hg(II), indicating that HS extracted from different types of regions contribute in different ways to the biogeochemical mercury cycle in the basin of the mid-Rio Negro, AM, Brazil. (c) 2007 Published by Elsevier B.V.

Formation of titania nanotube arrays by anodisation: DOE approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Psychometric Properties of the Oral Health Impact Profile and New Methodological Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Musculoskeletal reported symptoms among aircraft assembly workers: a multifactorial approach

The aim of this study was to evaluate factors associated with reported work-related musculoskeletal symptoms among aircraft assembly workers. Population consisted of 552 (491 men/61 women) workers who performed tasks related to the work of aircraft assembly. Participants completed a comprehensive questionnaire, including socio-demographic information, habits/lifestyles, working conditions, and work organization. Workers also answered the Nordic Musculoskeletal Questionnaire to obtain data on musculoskeletal symptoms. Multivariate logistic regression was performed to analyze factors associated with musculoskeletal reported symptoms. Results showed that body regions with the highest prevalence of reported musculoskeletal symptoms were similar when referred the past twelve months and the past seven days. Significant factors associated with musculoskeletal symptoms included variables related to conflicts at work, sleep problems, mental fatigue, and lack of time for personal care and recovery. Working time in the industry was associated only with reports for the last seven days and regular physical activity off-work seems to be a positive factor in preventing musculoskeletal symptoms for the past twelve months. The results highlight the multi-factorial nature of the problem. Actions to prevent musculoskeletal diseases at the aircraft assembly work should consider multiple interventions that would promote better recovery between work shifts.