Flexural behaviour of external R/C steel fibre reinforced beam-column joints

A softened strut-and-tie macro model able to reproduce the flexural behaviour ofr/>external beam-column joint is presented. The model is specific for concrete with hooked steel fibres (FRC) and it is designed to calculate the flexural response, as load-deflection curve, of a beam-column sub-assemblages. The model considers the presence of a constant vertical load acting on the column and of a monotonically increasing lateral force applied at the tip of the beam.

Internal versus external R&D:a study of R&D choice with sample selection

This paper extends previous analyses of the choice between internal and external R&D to consider the costs of internal R&D. The Heckman two-stage estimator is used to estimate the determinants of internal R&D unit cost (i.e. cost per product innovation) allowing for sample selection effects. Theory indicates that R&D unit cost will be influenced by scale issues and by the technological opportunities faced by the firm. Transaction costs encountered in research activities are allowed for and, in addition, consideration is given to issues of market structure which influence the choice of R&D mode without affecting the unit cost of internal or external R&D. The model is tested on data from a sample of over 500 UK manufacturing plants which have engaged in product innovation. The key determinants of R&D mode are the scale of plant and R&D input, and market structure conditions. In terms of the R&D cost equation, scale factors are again important and have a non-linear relationship with R&D unit cost. Specificities in physical and human capital also affect unit cost, but have no clear impact on the choice of R&D mode. There is no evidence of technological opportunity affecting either R&D cost or the internal/external decision.

Determinants of internal and external R&D offshoring: Evidence from Spanish firms

This paper analyzes the determinants of R&D offshoring of Spanish firms using information from the Panel of Technological Innovation. We find that being an exporter, international technological cooperation, continuous R&D engagement, applying for patents, being a for-eign subsidiary, and firm size are factors that positively affect the decision to offshore R&D. In addition, we find that a lack of financing is an obstacle relatively more important for inde-pendent firms than for firms that belong to business groups. For these latter, we also obtain that the factors that influence the decision to offshore R&D differ depending on whether the firm purchases the R&D services within the group or through the market: a higher degree of importance assigned to internal sources of information for innovation as compared to mar-ket sources increases (decreases) the probability of R&D offshoring only through the group (market).

Time-dependent R -matrix theory for ultrafast atomic processes

We describe an ab initio nonperturbative time-dependent R-matrix theory for ultrafast atomic processes. This theory enables investigations of the interaction of few-femtosecond and -attosecond pulse lasers with complex multielectron atoms and atomic ions. A derivation and analysis of the basic equations are given, which propagate the atomic wave function in the presence of the laser field forward in time in the internal and external R-matrix regions. To verify the accuracy of the approach, we investigate two-photon ionization of Ne irradiated by an intense laser pulse and compare current results with those obtained using the R-matrix Floquet method and an alternative time-dependent method. We also verify the capability of the current approach by applying it to the study of two-dimensional momentum distributions of electrons ejected from Ne due to irradiation by a sequence of 2 as light pulses in the presence of a 780 nm laser field.

Drivers of Local Firms’ Focus on Internal R&D in Emerging Economies and Their International Performance

Grounded on the resource-based view of the firm, the study of this thesis investigates the effect of four internal and external factors – engineer intensity, location, affiliation with the government, government funding – on Chinese firms’ decision to either invest in internal R&D activities or external R&D and the effect of this decision on the firms’ international market success. In addition, the moderating role of the presence of foreign firms in China is examined. To understand these relationships, the thesis’ theorization focuses on the issue of how firms can combine optimally the two options – “internal R&D” and “external R&D”. In this regard I juxtapose internal R&D and external R&D and compare their advantages and disadvantages. To test my model, I apply panel data from the Annual Industrial Survey Database provided by the Chinese National Bureau of Statistics. My results show that three of the four investigated factors affect Chinese firms’ resource allocation decisions; and effective resource allocation decisions lead effectively to international market success, strengthened by the presence of foreign firms in China. Moreover the findings bear several theoretical and managerial contributions. First I propose the last dimension of the “VRIO framework” – “organization” – as an endogenous component of the VRIO framework, as my study investigated how firms can effectively combine resources to generate a competitive advantage in terms of international market success. Previous academic literature so far focused on examining whether internal and external R&D are complements or substitutes. My study fills a gap in the literature by investigating the determinants of the efficient combination of the two strategies and the outcome of the combination. One of the managerial implications is that Chinese firms can learn from foreign companies that are present in China.

Application of Open Innovation Paradigm in Small and Medium Enterprises in Russia

The objective of this study is to explore how the Open Innovation paradigm is applied in by small and medium-size enterprises in Russia. The focus of the study is to understand how the processes of research and development and commercialization proceed in these kind of companies and to which extent they apply open innovation principles. Russian leadership makes certain steps for transition from the export of raw materials to an innovative model of economic growth. The research aims to disclose actual impact of these attempts. The closed innovation model and the erosion factors which lead to the destruction of an old one and emergence of new model are described. Features of open innovation implementation and intellectual property rights protection in small and medium enterprises are presented. To achieve the objective, a qualitative case study approach was chosen. Research includes facts and figures, views and opinions of management of studied companies related to innovation process in the company and in Russia in general. The research depicts the features of Open Innovation implementation by SMEs in Russia. A large number of research centers with necessary equipment and qualified personnel allow case companies to use external R&D effectively. They cooperate actively with research institutes, universities and laboratories. Thus, they apply inbound Open Innovation. On the contrary, lack of venture capital, low demand for technologies within the domestic market and weak protection of intellectual property limit the external paths to new markets. Licensing-out and creation of spin-off are isolated cases. Therefore, outbound Open Innovation is not a regular practice.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

Common effect of chemical and external pressures on the magnetic properties of RCoPO (R = La, Pr, Nd, Sm). II.

We investigate the direct correspondence between Co band ferromagnetism and structural parameters in the pnictide oxides RCoPO for different rare-earth ions (R = La, Pr, Nd, Sm) by means of muon-spin spectroscopy and ab initio calculations, complementing our results published previously G. Prando et al., Common effect of chemical and external pressures on the magnetic properties of RCoPO (R = La, Pr), Phys. Rev. B 87, 064401 (2013)]. We find that both the transition temperature to the ferromagnetic phase T-C and the volume of the crystallographic unit cell V are conveniently tuned by the R ionic radius and/or external pressure. We report a linear correlation between T-C and V and our ab initio calculations unambiguously demonstrate a full equivalence of chemical and external pressures. As such, we show that R ions influence the ferromagnetic phase only via the induced structural shrinkage without involving any active role from the electronic f degrees of freedom, which are only giving a sizable magnetic contribution at much lower temperatures.

General SU(2)(L) x SU(2)(R) x U(1)(EM) sigma model with external sources, dynamical breaking and spontaneous vacuum symmetry breaking

We give a general SU(2)(L) x SU(2)(R) x U(1)(EM) sigma model with external sources, dynamical breaking and spontaneous vacuum symmetry breaking, and present the general formulation of the model. It is found that sigma and pi(0) without electric charges have electromagnetic interaction effects coming front the internal structures. A general Lorentz transformation relative to external sources J(gauge) - (J(A mu) J(A mu)(kappa)) derived, using the general Lorentz transformation and the four-dimensional current of nuclear matter of the ground si ate with J(gauge) = 0, we give the four-dimensional general relations between the different currents of nuclear matter systems with J(gauge) not equal 0 and those with J(gauge) = 0. The relation of the density's coupling with external magnetic field is derived, which conforms well to dense nuclear matter in a strong magnetic field. We show different condensed effects in strong interaction about fermions and antifermions, and give the concrete scalar and pseudoscalar condensed expressions of sigma(0) and pi(0) bosons. About different dynamical breaking and spontaneous vacuum symmetry breaking, the concrete expressions of different mass spectra are obtained in field theory. This paper acquires the running spontaneous vacuum breaking value sigma'(0), and obtains the spontaneous vacuum breaking in tenus of the running sigma'(0), which make nucleon, sigma, and pi particles gain effective masses. We achieve both the effect of external sources and nonvanishing value of the condensed scalar and pseudoscalar paticles. It is deduced that the masses of nucleons, sigma and pi generally depend on different external sources.

CD-Systems of Stateless Deterministic R(1)-Automata Governed by an External Pushdown Store

We study cooperating distributed systems (CD-systems) of stateless deterministic restarting automata with window size 1 that are governed by an external pushdown store. In this way we obtain an automata-theoretical characterization for the class of context-free trace languages.

External linkages, R&D and innovation performance in US business services

This paper examines the innovation performance of 206 US business services firms. Results suggest that external linkages, particularly with customers, suppliers and strategic alliances, significantly enhance innovation performance in terms of the introduction of new services. A highly qualified workforce increases the probability of service and organizational innovation, and increases the extent of a firm's innovation, but unqualified employees also play an important role. Contrasting with some earlier research on services, the presence of formal and informal R&D significantly increases the extent of new-to-market and new-to-firm innovation.

External pressure in the hardening of phosphate in tribofilm on iron surfaces

Purpose: In the present work we consider our (in progress) spectroscopy study of zinc and iron phosphates under the influence external high pressure to determine zinc ion change coordination from tetrahedral to octahedral (or hexahedral) structure.----- Design/methodology/approach: The standard equipment is the optical high pressure cell with diamond (DAC). The DAC is assembled and then vibrational or electronic spectra are collected by mounting the cell in an infrared, Raman, EXAFS or UV-visible spectrometer.----- Findings: Mechanism by which zinc and iron methaphosphate material is transformed to glassy meta-phosphate is enhancing mechanical properties of tribofilm. The two decades of intensive study demonstrates that Zn (II) and Fe (III) ions participate to cross-link network under friction, hardening the phosphate.----- Research limitations/implications: Transition metal atoms with d orbital have flexible coordination numbers, for example zinc acts as a cross-linking agent increasing hardness, by changing coordination from tetrahedral to octahedral. Perhaps the external pressure effect on the [Zn–(O-P-)4 ] complex causes a transformation to an [Zn –(O-P-)6] grouping.----- Originality/value: This paper analyses high-pressure spectroscopy which has been applied for the investigation of 3D transition metal ions in solids. When studying pressure effects on coordination compounds structure, we can expect changes in ground electronic state (spin-crossovers), electronic spectra due to structural distortions (piezochromism), and changes in the ligand field causing shifts in the electronic transitions.

Spatial and temporal variations of mechanical properties and mineral content of the external callus during bone healing

After bone fracture, various cellular activities lead to the formation of different tissue types, which form the basis for the process of secondary bone healing. Although these tissues have been quantified by histology, their material properties are not well understood. Thus, the aim of this study is to correlate the spatial and temporal variations in the mineral content and the nanoindentation modulus of the callus formed via intramembranous ossification over the course of bone healing. Midshaft tibial samples from a sheep osteotomy model at time points of 2, 3, 6 and 9 weeks were employed. PMMA embedded blocks were used for quantitative back scattered electron imaging and nanoindentation of the newly formed periosteal callus near the cortex. The resulting indentation modulus maps show the heterogeneity in the modulus in the selected regions of the callus. The indentation modulus of the embedded callus is about 6 GPa at the early stage. At later stages of mineralization, the average indentation modulus reaches 14 GPa. There is a slight decrease in average indentation modulus in regions distant to the cortex, probably due to remodelling of the peripheral callus. The spatial and temporal distribution of mineral content in the callus tissue also illustrates the ongoing remodelling process observed from histological analysis. Most interestingly the average indentation modulus, even at 9 weeks, remains as low as 13 GPa, which is roughly 60% of that for cortical sheep bone. The decreased indentation modulus in the callus compared to cortex is due to the lower average mineral content and may be perhaps also due to the properties of the organic matrix which might be different from normal bone.

External orientation and business model adaptation in young and nascent firms : preliminary analysis from the CAUSSE project

Discovering factors that help or impede business model change is an important quest, both for researchers and practitioners. In this study we present preliminary findings based on the CAUSEE survey of young and nascent firms in Australia. In particular, we seek to determine an association between business model adaptation and external orientation among young and nascent firms within the random sample and amongst an oversample of high potential firms. The concept of external orientation is made operational by asking respondents whether, and to what extent, they rely on certain sources of advice and information. We find that high potential firms are more likely to have made at least some change to their business model, that greater use of external sources of advice is generally significantly associated with business model adaptation, but also that there appear to be different patterns of behaviour between the random sample and the over sample.

Design, characterisation and in vivo testing of a new, adjustable stiffness, external fixator for the rat femur

Very little is known about the infl uence of the mechanical environment on the healing of large segmental defects. This partly reflects the lack of standardised, well characterised technologies to enable such studies. Here we report the design, construction and characterisation of a novel external fixator for use in conjunction with rat femoral defects. This device not only imposes a predetermined axial stiffness on the lesion, but also enables the stiffness to be changed during the healing process. The main frame of the fi xator consists of polyethylethylketone with titanium alloy mounting pins. The stiffness of the fi xator is determined by interchangeable connection elements of different thicknesses. Fixators were shown to stabilise 5 mm femoral defects in rats in vivo for at least 8 weeks during unrestricted cage activity. No distortion or infections, including pin infections, were noted. The healing process was simulated in vitro by inserting into a 5 mm femoral defect, materials whose Young’s moduli approximated those of the different tissues present in regenerating bone. These studies confirmed that, although the external fixator is the major determinant of axial stiffness during the early phase of healing, the regenerate within the lesion subsequently dominates this property. There is much clinical interest in altering the mechanics of the defect to enhance bone healing. Our data suggest that, if alteration of the mechanical environment is to be used to modulate the healing of large segmental defects, this needs to be performed before the tissue properties become dominant.