Estimation of hexenuronic acids and kappa number in kraft pulps of Eucalyptus globulus by Fourier transform near infrared spectroscopy and multivariate analysis

Fourier transform near infrared (FT-NIR) spectroscopy was evaluated as an analytical too[ for monitoring residual Lignin, kappa number and hexenuronic acids (HexA) content in kraft pulps of Eucalyptus globulus. Sets of pulp samples were prepared under different cooking conditions to obtain a wide range of compound concentrations that were characterised by conventional wet chemistry analytical methods. The sample group was also analysed using FT-NIR spectroscopy in order to establish prediction models for the pulp characteristics. Several models were applied to correlate chemical composition in samples with the NIR spectral data by means of PCR or PLS algorithms. Calibration curves were built by using all the spectral data or selected regions. Best calibration models for the quantification of lignin, kappa and HexA were proposed presenting R-2 values of 0.99. Calibration models were used to predict pulp titers of 20 external samples in a validation set. The lignin concentration and kappa number in the range of 1.4-18% and 8-62, respectively, were predicted fairly accurately (standard error of prediction, SEP 1.1% for lignin and 2.9 for kappa). The HexA concentration (range of 5-71 mmol kg(-1) pulp) was more difficult to predict and the SEP was 7.0 mmol kg(-1) pulp in a model of HexA quantified by an ultraviolet (UV) technique and 6.1 mmol kg(-1) pulp in a model of HexA quantified by anion-exchange chromatography (AEC). Even in wet chemical procedures used for HexA determination, there is no good agreement between methods as demonstrated by the UV and AEC methods described in the present work. NIR spectroscopy did provide a rapid estimate of HexA content in kraft pulps prepared in routine cooking experiments.

How does residue management impact soil organic matter composition and quality under Eucalyptus globulus plantations in southwestern Australia?

This study investigated the influence of harvest residue management practices on soil organic matter (SOM) composition and quality from two second-rotation Eucalyptus globulus plantations in southwestern Australia, using solid-state 13C nuclear magnetic resonance (NMR) spectroscopy with cross-polarisation and magic-angle-spinning (CPMAS). Soil samples (0–5 cm) were collected every 12 months for 5 years from two sites that had contrasting soil types and fertility. Harvest residue management treatments established at both sites were (a) no harvest residues; and (b) double harvest residues. The use of 13C CPMAS and DD NMR spectroscopy enabled the successful non-destructive detection of SOM quality changes in the two E. globulus plantations. Relative intensities of 13C CPMAS NMR spectral regions were similar at both sites, and for both harvest residue treatments, indicating that SOM composition was also similar. Dipolar dephasing (DD) NMR spectra revealed resonances in SOM assigned to lignin and tannin structures, with larger resonances in the carbonyl and alkyl C regions that were indicative of cuticular material, enabling detection of changes in SOM quality. Retention of double harvest residues on the soil surface increased the soil quality compared with removal of all harvest residues at both sites as indicated by the NMR aromaticities, but this was most noticeable at Manjimup, which had greater initial soil fertility.

Py-GC/MS(FID) assessed behavior of polysaccharides during kraft delignification of Eucalyptus globulus heartwood and sapwood

Eucalyptus globulus heartwood, sapwood and their delignified samples by kraft pulping at 130, 150 and 170 degrees C along time were characterized in respect to total carbohydrates by Py-GC/MS(FID). No significant differences between heartwood and sapwood were found in relation to pyrolysis products and composition. The main wood carbohydrate derived pyrolysis compounds were levoglucosan (25.1%), hydroxyacetaldehyde (12.5%), 2-oxo-propanal (10.3%) and acetic acid (8.7%). Levoglucosan decreased during the early stages of delignification and increased during the bulk and residual phases. Acetic acid decreased hydroxyacetaldehyde and 2-oxo-propanal increased, and 2-furaldehyde and hydroxypropanone remained almost constant during delignification. The C/L ratio was 3.2 in wood and remained rather constant in the first pulping periods until a loss of 15-25% in carbohydrate and 60% in lignin. Afterwards it increased sharply until 44 that correspond to the removal of 25-35% of carbohydrates and 95% of lignin. The pulping reactive selectivity to lignin vs. polysaccharides was the same for sapwood and heartwood. (C) 2013 Elsevier B.V. All rights reserved.

Comparison of Py-GC/FID and Wet Chemistry Analysis for Lignin Determination in Wood and Pulps from Eucalyptus globulus

The kraft pulps produced from heartwood and sapwood of Eucalyptus globulus at 130 degrees C, 150 degrees C, and 170 degrees C were characterized by wet chemistry (total lignin as sum of Klason and soluble lignin fractions) and pyrolysis (total lignin denoted as py-lignin). The total lignin content obtained with both methods was similar. In the course of delignification, the py-lignin values were higher (by 2 to 5%) compared to Klason values, which is in line with the importance of soluble lignin for total lignin determination. Pyrolysis analysis presents advantages over wet chemical procedures, and it can be applied to wood and pulps to determine lignin contents at different stages of the delignification process. The py-lignin values were used for kinetic modelling of delignification, with very high predictive value and results similar to those of modelling using wet chemical determinations.

Reactivity of syringyl and guaiacyl lignin units and delignification kinetics in the kraft pulping of eucalyptus globulus wood using Py-Gc-Ms/FID

Eucalyptus globulus sapwood and heartwood showed no differences in lignin content (23.0% vs. 23.7%) and composition: syringyl-lignin (17.9% vs. 18.0%) and guaiacyl-lignin (4.8% vs. 5.2%). Delignification kinetics of S- and G-units in heartwood and sapwood was investigated by Py-GC–MS/FID at 130, 150 and 170 °C and modeled as double first-order reactions. Reactivity differences between S and G-units were small during the main pulping phase and the higher reactivity of S over G units was better expressed in the later pulping stage. The residual lignin composition in pulps was different from wood or from samples in the initial delignification stages, with more G and H-units. S/G ratio ranged from 3 to 4.5 when pulp residual lignin was higher than 10%, decreasing rapidly to less than 1. The S/H was initially around 20 (until 15% residual lignin), decreasing to 4 when residual lignin was about 3%.

Modelação do crescimento da árvore individual de Eucalyptus globulus labill

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Antimicrobial activity of Eucalyptus globulus oil, xylitol and papain: a pilot study

OBJECTIVE To evaluate the in vitro antimicrobial activity of the Eucalyptus globulus essential oil, and of the xylitol and papain substances against the following microorganisms: Pseudomonas aeruginosa; Samonella sp.; Staphylococus aureus; Proteus vulgaris; Escherichia coli and Candida albicans. METHOD The in vitro antimicrobial evaluation was used by means of the agar diffusion test and evaluation of the inhibition zone diameter of the tested substances. Chlorhexidine 0.5% was used as control. RESULTS The Eucalyptus globulus oil showed higher inhibition than chlorhexidine when applied to Staphylococcus aureus, and equal inhibition when applied to the following microorganisms: Escherichia coli, Proteus vulgaris and Candida albicans. Papain 10% showed lower antimicrobial effect than chlorhexidine in relation to Candida albicans. Xylitol showed no inhibition of the tested microorganisms. CONCLUSION The Eucalyptus globulus oil has antimicrobial activity against different microorganisms and appears to be a viable alternative as germicidal agent hence, further investigation is recommended.

Inonotus splitbergeri a stem pathogen of Eucalyptus globulus in Uruguay

Inonotus splitbergeri é relatado pela primeira vez o Uruguay causando podridáo-do-lenho de Eucalyptus globulus. Durante as tempestades ocorre o tombamento de árvores, mesmo daquelas totalmente enfolhadas.

Teratosphaeria nubilosa em plantações comerciais de Eucalyptus globulus nas regiões Sul e Sudeste do Brasil

Muitos patógenos, principalmente fungos, ocorrem em várias espécies de eucalipto, desde a fase de viveiro até os plantios adultos. Dentre as doenças fúngicas, destaca-se a mancha de micosferela, considerada uma das principais doenças, e o Eucalyptus globulus, uma das espécies mais suscetíveis. Esta doença é causada por várias espécies pertencentes aos gêneros Teratosphaeria e Mycosphaerella, sendo T. nubilosa de maior importância. O objetivo do presente estudo foi verificar a presença do fungo T.nubilosa em materiais coletados nos seguintes locais: Bagé-RS, Pedras Altas-RS, Botucatu-SP, Jacareí- SP e Itapeva-SP. Por meio de isolamentos a partir de folhas de E. globulus apresentando mancha de micosferela, foi possível a obtenção de isolados do fungo. A observação quanto ao padrão de germinação dos ascósporos, o seu crescimento micelial, e também por meio de PCR com primers da região genômica ITS1 e ITS4 e sequenciamento, e submissão ao GenBank, foi possível a determinação do gênero e da espécie do patógeno como T. nubilosa. Nos cinco locais estudados foi confirmada a presença deste agente causal de mancha de micosferela em plantios de E. globulus nas regiões Sul e Sudeste do Brasil.

Resitência de Eucalyptus globulus e Eucalyptus nitens à ferrugem (Puccinia psidii)

Avaliou-se a resistência das espécies de Eucalyptus globulus e Eucalyptus nitens inoculadas com um isolado uredinospórico monopustular de Puccinia psidii origininário de plantio de Eucalypstus grandis (UFV-2) em Itapetininga, SP. A avaliação foi realizada aos 12 dias após a inoculação, e quantificou-se a doença por meio de uma escala de notas com quatro classes de severidade da doença (S0, S1, S2 e S3). Em média, aproximadamente 60% das plantas de E. globulus e 50% de E. nitens foram resistentes a P. psidii. A variabilidade intra-específica nos materiais estudados indica ser possível a clonagem de genótipos resistentes para plantio comercial ou para uso em programas de melhoramento genético.

Fungi associated to bark lesions of Eucalyptus globulus stems in plantations from Uruguay

Trees with stem bark lesions are frequently observed in Eucalyptus globulus Labill. plantations, particularly in the central west region of Uruguay. These lesions constitute a problem for trunk decortications at harvest and they also facilitate the access of fungi that could cause wood decay. Seven, three and oneyear-old plantations, located at three sites in close proximity were selected. Four types of trunk lesions were present in trees regardless the age of plantation and more than one type was found in each plantation. The aim of this study was to investigate the fungal composition associated with these lesions and compare them to healthy tissues and try to find out the origin of these symptoms. Another purpose was to elucidate the real role of the fungi considered pathogens by means of experimental inoculations. Segments from lesions and healthy tissues yielded 897 fungal isolates belonging to 32 taxa, 681 isolates from bark lesions and 216 from healthy tissues. Both healthy and symptomatic tissues showed similar fungal species composition, but with differences in frequencies of colonization. Cytospora eucalypticola Van der Westhuizen, Botryosphaeria spp., Pestalotiopsis guepinii (Desm.) Stey. and Penicillium spp. were the dominant species isolated. As symptoms were not reproduced after experimental inoculation with Botryosphaeria ribis Grossenb. & Duggar and B. eucalyptorum Crous, & M.J. Wingf, it could be suggested that these lesions were originated by unfavorable environmental conditions. The frost that occurred for several days out of season and flooding may have been involved in the development of bark lesion.

Multiplicação in vitro de clones híbridos de Eucalyptus globulus

O presente estudo teve como objetivos avaliar a resposta de clones híbridos de Eucalyptus globulus nos meios de cultura MS e JADS durante a fase de multiplicação in vitro. Os explantes foram provenientes da fase de estabelecimento in vitro de 21 clones de Eucalyptus urophylla x E. globulus, sendo 11 clones com três introduções in vitro, e de seis clones de Eucalyptus grandis x E. globulus, sendo dois clones com três introduções. Os clones foram subcultivados mensalmente nos meios de cultura MS e JADS, com 0,5 mg L-1 de BAP (6-benzilaminopurina) e 0,01 mg L-1 de ANA (ácido naftalenoacético). Concluiu-se que: houve tendência de maiores taxas de multiplicação no meio MS; a maioria dos clones se estabeleceu na fase de multiplicação in vitro, enquanto alguns clones se mostraram recalcitrantes nesta fase da micropropagação; a taxa de multiplicação apresentou tendência de aumento nos primeiros subcultivos e posterior queda para a maioria dos clones.

Enraizamento de miniestacas de clones híbridos de Eucalyptus globulus

Este estudo teve como objetivo avaliar o efeito do regulador de crescimento ácido indolbutírico (AIB) no enraizamento de miniestacas apicais e intermediárias de clones de Eucalyptus urophylla x E. globulus e Eucalyptus grandis x E. globulus. O enraizamento das miniestacas foi conduzido durante 30 dias em casa de vegetação climatizada e, em seguida, as mudas foram transferidas para casa de sombra, permanecendo por 10 dias. O delineamento experimental utilizado foi em blocos ao acaso, em arranjo fatorial triplo, constituído de dois tipos de miniestacas (apicais e intermediárias), três concentrações de AIB (0, 2000 e 4000 mg L-1) e 11 clones, em três repetições, compostas de parcelas com 12 miniestacas por repetição. Não houve efeito do AIB sobre as características avaliadas. A sobrevivência e o enraizamento das miniestacas apicais foram significativamente superiores. Houve diferença significativa entre clones quanto às características avaliadas, exceto a sobrevivência após 30 dias na casa de vegetação.

Chemical characteristics and Kraft pulping of tension wood from Eucalyptus globulus labill

Tension (TW) and opposite wood (OW) of Eucalyptus globulus trees were analyzed for its chemical characteristics and Kraft pulp production. Lignin content was 16% lower and contained 32% more syringyl units in TW than in OW. The increase in syringyl units favoured the formation of β-O-4 bonds that was also higher in TW than in OW (84% vs. 64%, respectively). The effect of these wood features was evaluated in the production of Kraft pulps from both types of wood. At kappa number 16, Kraft pulps obtained from TW demanded less active alkali in delignification and presented slightly higher or similar pulp yield than pulps made with OW. Fiber length, coarseness and intrinsic viscosity were also higher in tension than in opposite pulps. When pulps where refined to 30°SR, TW pulps needed 18% more revolutions in the PFI mill to achieve the same beating degree than OW pulps. Strength properties (tensile, tear and burst indexes) were slightly higher or similar in tension as compared with opposite wood pulps. After an OD0(EO)D1 bleaching sequence, both pulps achieved up to 89% ISO brightness. Bleached pulps from TW presented higher viscosity and low amount of hexenuronic acids than pulps from OW. Results showed that TW presented high xylans and low lignin content that caused a decrease in alkali consumption, increase pulp strength properties and similar bleaching performance as compared with pulps from OW.