Ethyl 2-acetyl-3-(4-chloroanilino)butanoate

The title compound, C14H18ClNO3, adopts an extended conformation, with all of the main chain torsion angles associated with the ester and amino groups trans. In the crystal, inversion dimers linked by pairs of N-H center dot center dot center dot O hydrogen bonds are observed.

The structures of ethyl 1,2,2-tricyano-3,3-dimethylcyclopropane-1-carboxylate and ethyl 2',3,3'-tricyanocyclohexanespirocyclopropane-2'-carboxylate

The crystal and molecular structures of C ,,H,IN302 (I) and C14HIsN302 (II) have been determined by direct methods using three-dimensional X-ray diffractometer data. Crystals of (I) are orthorhombic, space group Pna21, with a = 14.662(6), b = 10.492(5), c = 7.375 (3)A, Z = 4, V = 1134.5 A 3, D O = 1.25 (by flotation), D e = 1.269 Mgm -a, g(MoKa) = 0.085 mm -1. Crystals of (II) are monoclinic, space group P21/a, with a = 7.886 (5), b = 22.011 (8), c = 8.100 (3) A, fl = 103.12 (5) °, Z = 4, V = 1369.2 A 3, D O = 1.23 (by flotation), D e = 1.255 Mg m -3, g(Mo Kct) = 0.080 mm -1. Least-squares full-matrix refinement based on 782 (I) and 1400 independent reflections (II) converged at R = 0.040 (I) and 0.042 (II). The effect of electron-withdrawing substituents on the geometry of the cyclopropane ring is discussed.

N-{1-[(3-Bromopropyl)aminocarbonyl]ethyl}-2-(2-nitrobenzenesulfonamido)propionamide

In the title compound, C15H21BrN4O6S, all three NH groups are involved in intermolecular N-H center dot center dot center dot O interactions which, together with two intermolecular C-H center dot center dot center dot O contacts, lead to a continuous antiparallel beta-sheet structure. There are no pi-pi interactions between molecules, and two C-H center dot center dot center dot pi interactions primarily govern the linkage between sheets.

Ethyl 2,6-dichloro-4-phenylquinoline-3-carboxylate

In the title compound,C18H13Cl2NO2,the quinoline ring system is almost planar (r.m.s.deviation 0.009 angstrom), and the phenyl and carboxylate planes are twisted away from it by 59.2 (1)and 65.9 (2)degrees,respectively.

Ethyl 2-acetyl-3-(4-bromoanilino)butanoate

The title compound, C14H18BrNO3, adopts an extended conformation, with all of the main-chain torsion angles associated with the ester and amino groups close to trans. In the crystal, inversion dimers linked by pairs of N-H center dot center dot center dot O hydrogen bonds are observed.

Transformation reactions of α-pinene—I : Reactions of ethyl (−)-2,2-dimethyl-3-ketocyclobutyl acetate

Some transformation reactions of α-pinene to give 4- and 3-membered ring compounds, not hitherto obtained from this source, are described. The study furnished a convenient method of preparation of the optically active cyclobutanone IVa, the title compound which served as the key substrate for all the transformations reported.

4-Benzyl-5-ethyl-2-(2-furylcarbonylmethylsulfanyl) pyrimidin-6(1H)-one

The title compound, C19H18N2O3S, shows favourable activity against HIV-1. The phenyl ring is twisted with respect to the pyrimidine ring by 61.56 (9)degrees. Intermolecular N-H center dot center dot center dot O and C-H center dot center dot center dot O

Mechanism-transformation synthesis and characterization of poly(styrene-b-2-ethyl-2-oxazoline) diblock copolymer

By mechanism-transformation (anionic --> cationic) poly(styrene-6-2-ethyl-2-oxazoline) diblock copolymer, PS-b-PEOx, was synthesized in two steps. The first step is the polymerization of styrene block capped with ethylene oxide and its tosylation; the second step is the cationic ring-opening polymerization of 2-ethyl-2-oxazoline. The products were thoroughly characterized by various methods, such as H-1-NMR, IR, DMA, TEM and SAXS. The results show that the copolymer obtained possesses high molecular weight and narrow molecular weight distribution.

Effect and mechanism in compatibilization of poly(styrene-b-2-ethyl-2-oxazoline) diblock copolymer in poly(2,6-dimethyl-1,4-phenylene oxide) poly(ethylene-ran-acrylic acid) blends

The compatibilization effect of poly(styrene-b-2-ethyl-2-oxazoline) diblock copolymer, P(S-b-EOx), on immiscible blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and poly(ethylene-co-acrylic acid) (EAA) is examined in terms of phase structure and thermal, rheological and mechanical properties, and its compatibilizing mechanism is investigated by Fourier-transform infrared spectroscopy. The block copolymer, synthesized by a mechanism transformation copolymerization, is used in solution blending of PPO/EAA. Scanning electron micrographs show that the blends exhibit a more regular and finer dispersion on addition of a small amount of P(S-b-EOx). Thermal analysis indicates that the grass transition of PPO and the lower endothermic peal; of EAA components become closer on adding P(S-b-EOx), and the added diblock copolymer is mainly located at the interface between the PPO and EAA phases. The interfacial tension estimated by theological measurement is significantly reduced on addition of a small amount of P(S-b-EOx). The tensile strength and elongation at break increase with the addition of the diblock copolymer for PPO-rich blends, whereas the tensile strength increases but the elongation at break decreases for EAA-rich blends. This effect is interpreted in terms of interfacial activity and the reinforcing effect of the diblock copolymer, and it is concluded that the diblock copolymer plays a role as an effective compatibilizer for PPO/EAA blends. The specific interaction between EAA and polar parts of P(S-b-EOx) is mainly hydrogen bonding. (C) 1998 Elsevier Science Ltd. All rights reserved.

Synthesis and characterization of diblock copolymer of butadiene and 2-ethyl-2-oxazoline

By mechanism-transformation (anionic --> cationic) polymerization, diblock copolymer of butadiene and 2-ethyl-2-oxazoline (PBd-b-PEOx) was synthesized in two steps. The first step is the polymerization of butadiene block capped with ethylene oxide and its tosylation; the second step is the cationic ring-opening polymerization of 2-ethyl-2-oxazoline. The products were characterized by various methods, such as IR, (HNMR)-H-1, DMA, TEM and SAXS. The results show that the obtained copolymers possess high molecular weight and narrow molecular weighs distribution, and that the content of 1,4-structure was controllable.

Effect of the synthetic coumarin, ethyl 2-oxo-2H-chromene-3-carboxylate, on activity of Crotalus durissus ruruima sPLA2 as well as on edema and platelet aggregation induced by this factor

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

(Z)-Ethyl 2-hydroxyimino-2-(4-nitrobenzyl)ethanoate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the synthetic coumarin, ethyl 2-oxo-2H-chromene-3-carboxylate, on activity of Crotalus durissus ruruima sPLA2 as well as on edema and platelet aggregation induced by this factor

We show that ethyl 2-oxo-2H-chromene-3-carboxylate (EOCC), a synthetic coumarin, irreversibly inhibits phospholipase A(2) (sPLA2) from Crotalus durissus ruruima venom (sPLA2r) with an IC(50) of 3.1 +/- 0.06 nmol. EOCC strongly decreased the V(max) and K(m), and it virtually abolished the enzyme activity of sPLA2r as well as sPLA2s from other sources. The edema induced by 5PLA2r + EOCC was less than that induced by 5PLA2r treated with p-bromophenacyl bromide, which was more efficient at neutralizing the platelet aggregation activity of native 5PLA2r. Native 5PLA2r induced platelet aggregation of 91.54 +/- 9.3%, and sPLA2r +/- EOCC induced a platelet aggregation of 18.56 +/- 6.5%. EOCC treatment also decreased the myotoxic effect of sPLA2r. Mass spectrometry showed that EOCC formed a stable complex with sPLA2r, which increased the mass of native 5PLA2r from 14,299.34 da to 14,736.22 Da. Moreover, the formation of this complex appeared to be involved in the loss of 5PLA2r activity. Our results strongly suggest that EOCC can be used as a pharmacological agent against the 5PLA2 in Crotalus durissus sp. venom as well as other sPLA2s. (C) 2010 Elsevier Ltd. All rights reserved.

Dispersed lipid liquid crystalline phases stabilized by a hydrophobically modified cellulose

Aqueous dispersions of monoolein (MO) with a commercial hydrophobically modified ethyl hydroxyethyl cellulose ether (HMEHEC) have been investigated with respect to the morphologies of the liquid crystalline nanoparticles. Only very low proportions of HMEHEC are accepted in the cubic and lamellar phases of the monoolein-water system. Due to the broad variation of composition and size of the commercial polymer, no other single-phase regions were found in the quasi-ternary system. Interactions of MO with different fractions of the HMEHEC sample induced the formation of lamellar and reversed hexagonal phases, identified from SAXD, polarization microscopy, and cryogenic TEM examinations. In excess water (more than 90 wt %) coarse dispersions are formed more or less spontaneously, containing particles of cubic phase from a size visible by the naked eye to small particles observed by cryoTEM. At high polymer/MO ratios, vesicles were frequently observed, often oligo-lamellar with inter-lamellar connections. After homogenization of the coarse dispersions in a microfluidizer, the large particles disappeared, apparently replaced by smaller cubic particles, often with vesicular attachments on the surfaces, and by vesicles or vesicular particles with a disordered interior. At the largest polymer contents no proper cubic particles were found directly after homogenization but mainly single-walled defected vesicles with a peculiar edgy appearance. During storage for 2 weeks, the dispersed particles changed toward more well-shaped cubic particles, even in dispersions with the highest polymer contents. In some of the samples with low polymer/MO ratio, dispersed particles of the reversed hexagonal type were found. A few of the homogenized samples were freeze-dried and rehydrated. Particles of essentially the same types, but with a less well-developed cubic character, were found after this treatment. © 2007 American Chemical Society.

A revised structure for the condensation product of 2-carbethoxycyclopentanone and ethyl cyanoacetate

The condensation product of 2-carbethoxycyclopentanone and ethyl cyanoacetate is ethyl 2-carbethoxycyclopentylidene cyanoacetate (IIa) and not the one described by Kon and Nanji. Similarly, 2-carbomethoxycyclopentanone and methyl cyanoacetate yield methyl 2-carbomethoxycyclopentylidene cyanoacetate (IIb). The by-products obtained in the first reaction are cyclopentylidene cyanoacetate (IV) and the enamine of 2-carbethoxycyclopentanone (VIa).