An Ergonomic Evaluation of a Wrist Brace for Canadian Tree Planters

Tree planting is one of the most physically demanding occupations in Canada and as a result, tree planters are at an elevated risk of injury, specifically at the wrist. Wrist injuries develop on account of the highly repetitive nature of the job, as well as other musculoskeletal risk factors including non-neutral wrist postures and high impact forces sustained at the wrist during shovel-ground impact. As a result, wrist brace use has become common among planters, in an effort to limit deviated wrist postures while also providing enhanced stability at the wrist. The external stability provided by a wrist brace is thought to reduce the muscular effort required to provide stiffness at the wrist during shovel-ground impact. Since these prospective benefits have not been formally investigated, the purpose of this study was to determine the effect of a wrist brace on wrist posture, muscle activity, and joint rotational stiffness about the wrist joint (for two degrees of freedom: flexion/extension and ulnar/radial deviation). We hypothesized that the brace would promote more neutrally aligned wrist angles, and that muscle activity and joint rotational stiffness would also decrease when participants wore the brace. Fourteen tree planters with at least one season of experience were recruited to complete two planting conditions in a laboratory setting: one condition while wearing the brace (with brace, WB) and one condition without the brace (no brace, NB). The results from this study showed that at shovel-ground impact muscle activity trended towards increasing in three muscles when participants wore the brace. Additionally, wrist angles improved about the flexion/extension axis of rotation while increasing in deviation about the ulnar/radial axis of rotation when participants wore the brace. Joint rotational stiffness increased when participants wore the wrist brace. Participants from this study indicated difficulty gripping the shovel due to the bulk of the wrist brace, and this feature is discussed with possible suggestions for future iterations of design. In addition to grip diameter this analysis also prompts the suggestion that hand length and experience should also be considered in the design of tree planting tools, specifically an ergonomic aid such as a wrist brace.

Assessment of Ergonomic Aspects in Dental Clinic Rooms

This study aimed to describe how to evaluate and quantify the ergonomic satisfaction level of dental clinics rooms. Requirements for design, production and selection of dental equipment as described in ISO/TC-106/SC-6-N-411, support more comprehensive studies for an ergonomic evaluation and ergo design of the dental workstations. It was created a checklist of ergonomics requirements which is supported by Standards ISO/FDI and acquired by mean of a literature review. According to information exposed at the document of the Ergonomics Society of Dental Ergonomics - ESDE we can consider that the elaboration of an ergonomic evaluation protocol regard to the dental workstation is an important demand for the ergonomics, particularly in relation to the performance of the ergonomic design which presents qualified to assist to dental equipment manufactures. By this means, the identification of the evaluation factors pointed in ISO/TC 106/SC 6 N 411 offers the basic information to the process of elaboration of this protocol addressed by the described general guidelines.

Digital human modelling for vehicle design and manufacturing

Digital human modelling (DHM) has today matured from research into industrial application. In the automotive domain, DHM has become a commonly used tool in virtual prototyping and human-centred product design. While this generation of DHM supports the ergonomic evaluation of new vehicle design during early design stages of the product, by modelling anthropometry, posture, motion or predicting discomfort, the future of DHM will be dominated by CAE methods, realistic 3D design, and musculoskeletal and soft tissue modelling down to the micro-scale of molecular activity within single muscle fibres. As a driving force for DHM development, the automotive industry has traditionally used human models in the manufacturing sector (production ergonomics, e.g. assembly) and the engineering sector (product ergonomics, e.g. safety, packaging). In product ergonomics applications, DHM share many common characteristics, creating a unique subset of DHM. These models are optimised for a seated posture, interface to a vehicle seat through standardised methods and provide linkages to vehicle controls. As a tool, they need to interface with other analytic instruments and integrate into complex CAD/CAE environments. Important aspects of current DHM research are functional analysis, model integration and task simulation. Digital (virtual, analytic) prototypes or digital mock-ups (DMU) provide expanded support for testing and verification and consider task-dependent performance and motion. Beyond rigid body mechanics, soft tissue modelling is evolving to become standard in future DHM. When addressing advanced issues beyond the physical domain, for example anthropometry and biomechanics, modelling of human behaviours and skills is also integrated into DHM. Latest developments include a more comprehensive approach through implementing perceptual, cognitive and performance models, representing human behaviour on a non-physiologic level. Through integration of algorithms from the artificial intelligence domain, a vision of the virtual human is emerging.

Avaliação ergonômica do processo de separação de materiais recicláveis utilizando um sistema modular estudo de caso em uma cooperativa de catadores do Estado do Rio de Janeiro.

O setor de separação (triagem) de materiais recicláveis de uma cooperativa localizada no estado do Rio de Janeiro foi o objeto deste estudo que teve como objetivo realizar uma avaliação ergonômica do processo de separação de resíduos recicláveis, executado por catadoras, utilizando um sistema modular. Os procedimentos metodológicos consistiram em pesquisa bibliográfica com levantamento do estado da arte, observações de campo utilizando a Análise Ergonômica do Trabalho (AET) e modelos esquemáticos da engenharia de métodos, e a realização de dois experimentos (posto-rampa e posto-bancada), utilizando a estratégia para montagem de ciclogramas proposta na Análise por Decomposição em Etapas (ADE). As análises obtidas através dos resultados de duas situações permitiram constatar que o processo atual de separação na rampa é deficitário, demorado e cansativo, deixa os catadores com dores nas costas e na coluna, além de existirem muitas perdas de tempo por transporte de materiais não agregando valor aos produtos, por conta da distância em que ficam os recipientes para o acondicionamento do material separado. O módulo bancada indicou ser a melhor alternativa para o arranjo físico da separação, encurtando as distâncias percorridas, suprimindo algumas movimentações do corpo (rotações e flexões de tronco), reduzindo os riscos de lesão na coluna vertebral. Diferente do arranjo físico atualmente adotado, o posto-bancada possibilita reduzir a duração média do ciclo e a frequência das Atividades Extra Ciclo (AECs). As recomendações para a melhoria da atividade na organização estudada visam preservar a saúde e elevar a produtividade. Elas foram elaboradas, considerando o arranjo físico, método de trabalho e qualificação dos trabalhadores.

Evaluación comparativa de factores de preferencia uso de una herramienta de corte para floricultura con un nuevo diseño, versus la herramienta tradicional, estudio piloto

Colombia es uno de los principales productores de flores y rosas a nivel mundial y a través de los años ha presentado diversos problemas en la actividad industrial que permite la recolección de rosas. La cosecha y alistamiento del producto se realiza mediante actividades principalmente manuales. El corte de la rosa se efectúa con una herramienta conocida como tijera de poda manual, lo cual ha dado lugar a problemas ergonómicos al efectuar el corte, particularmente evidentes en personas de manos pequeñas, pues la apertura de operación excede la longitud máxima de extensión y capacidad de agarre de la mano, lo que conlleva a esfuerzos y posturas perjudiciales, especialmente desviaciones ulnares/radiales y flexión/extensión pronunciada de muñeca, permitiendo la aparición de lesiones por trauma acumulativo en el conjunto mano-muñeca. Este trabajo evalúa un nuevo diseño de tijera de poda manual concebida para disminuir el problema de posturas perjudiciales de la muñeca en el momento del corte. Se trata de un estudio cuasi-experimental, de observaciones pareadas, que permitió evaluar el nuevo diseño de tijera en condiciones reales de uso durante una fracción de la jornada de trabajo, donde los operarios la pudieron comparar con su tijera convencional y pudieron calificar las características de diseño de cada una de ellas a través de una escala de intervalo con rostros felices a tristes. Factores novedosos como el sistema de agarre con mango rotativo fueron bien aceptados en la nueva tijera, así como la suavidad en el accionamiento. El peso de la nueva herramienta es mayor a la actual y no fue bien aceptado. Personas de mayor edad y con mayor tiempo en el cargo muestran una preferencia hacia la tijera de poda que utilizan actualmente.

Qualidade de sono e qualidade de vida em trabalhadores submetidos a diferentes esquemas de trabalho de uma empresa petroquímica

One of the largest problems of the present time resulting from the economic globalization and the modern technology, of the point of view of the biological rhytms of our organism, it is offering services and production of goods available in 24 o'clock, that it demands organized workers in several work schedules besides the hours of the day. Those schedules cause a series of biopsychosocial consequences in the worker's health, in function of circadian, homeostatic and psychosocial alterations. Accordingly, the aim of this study was to accomplish an evaluation of the effects of several works schedules in the pattern of the sleep wake cycle, anxiety, stress and in the health. We counted with a sample of 274 workers subdivided in 49 daytime worker groups and 225 workers in different shift work schedules with different speeds (rotating shift group, slower day shift group, faster day shift group). From the results analysis it is verified irregularities of the daily activities, stress and alterations in the workers' health in all schedules. It was also verified thata the workers thata presented irregularities in the daily activities were the mroe stressed. On the other hand, the shift works were considered more ansious and associated with bad sleep quality. It was verified that the workers with bad sleep quality were those presented larger levels of dispocional anxiety. There was no statistically significant correlation between bad sleep quality and irregular daily lifestyle. However, it can be affirmed thata shift work schendules doesn't are the main determinant for the circadian alterations, but the answers of the individuals to the shifts work; and that the inadequate behavioural strategies to work with the effects of the shift schedules. In conclusion, individual strategies related to the coping of the work in shift (adaptation and tolerance) should be extolled as indispensable tool in the ergonomic evaluation of the work

Realidade virtual aplicada à ergonomia por meio do design participativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da força de preensão palmar plena e pulpo-lateral: relação com a antropometria da mão e posições de trabalho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação ergonômica dos controles e mostradores do posto de trabalho do operador de tratores

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Trabalho de teleatendente: proposta de um protocolo de avaliação ergonômica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Consultório odontológico: uma AET utilizando-se da EWA

This work tells the first steps of a larger project, that has for objective to develop the ergonomic evaluation of clinics odontologics installed in the Basic Units of Health of the municipal districts from São Paulo of São José dos Campos and Bauru. It is looked for to the end of the work to have characterized them, making possible like this the analysis in the way as it happens the interface among the users, equipments and atmosphere. For so much some will be used methodologies consecrated in the international scenery. It is told the results obtained with the first developed analysis, as test equal calibration of the chosen methodologies, as well as determination of procedures and worn-out times, for planning of the process.

Aplicação de um método ergonômico em área de convívio em um campus universitário

The study presents the application of an ergonomic method based on graphical mesh, created to analyze the attributes of public open space and that influence on their usability. It was based on DePAN method, created to classify the service level offered by niches present in open relationship spaces. However, this method adopted Geographical Information System (GIS ) to make maps that represent the space attributes. This study proposed an adaptation of this method, which replaces GIS by AutoCAD software to generate maps . The goal is to test the feasibility and efficiency of producing maps in AutoCAD software to represent the service niches level. An relashionship area on a college campus for data collecting in graphical meshes and maps confection. By applying the graphical mesh the attributes of that space were evaluated to help promote people permanence on site. Although the process through AutoCAD seems to be harder by being mechanical it guarantees a satisfactory result for analysis, resembling images generated by GIS. Therefore, it is concluded that it’s possible to represent graphically the riches service level.

Assessment of the ergonomic design of diagnostic ultrasound transducers through wrist movements and subjective evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)