912 resultados para endodontic paper point
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Purpose: To evaluate the influence of the brush type as a earner of priming adhesive solutions and the use of paper points as a remover of the excess of these solutions on the push-out bond strength of resin cement to bovine root dentin. The null hypotheses were that brush type and the use of paper points do not affect the bond strength. Materials and Methods: The canals of 80 single-root bovine roots (16 mm in length) were prepared at 12 mm using the preparation drill (FRC Postec Plus, Ivoclar). Half of each root was embedded in acrylic resin and the specimens were divided into 8 groups, considering the factors brush type (4 levels) and paper point (2 levels) (n = 10): Gr 1: small microbrush (Cavi-Tip, SDI); Gr 2: Microbrush (Dentsply); Gr 3: Endobrush (Bisco); Gr 4: conventional brush (Bisco); Gr 5: Cavi-Tip (SDI) + paper points; Gr 6: Microbrush (Dentsply) + paper points; Gr 7: Endobrush (Bisco) + paper points; Gr 8: conventional brush (Bisco) + paper points. The root dentin was treated with a multistep total-etch adhesive system (All Bond 2). The adhesive system was applied using each microbrush, with and without using paper points. One fiber post was molded with addition silicon and 80 posts were made of resin cement (Duolink), The resin posts were luted (Duolink resin cement), and the specimens were stored for 24 h in water at 37°C. Each specimen was cut into 4 disk-shaped samples (1.8 mm in thickness), which were submitted to the push-out test. Results: The brush type (p < 0.0001) (small microbrush > microbrush = endobrush = conventional brush) and the use of paper points (p = 0.0001) (with > without) influenced the bond strength significantly (two-way ANOVA). The null hypotheses were rejected. Conclusion: The smallest brush (Cavi-Tip) and the use of paper points significantly improved the resin bond to bovine root dentin.
Resumo:
The aim of the present study was to investigate the teacher’s perception about working both with individuals with autism and with Down’s syndrome. A semi-structured interview was performed with 10 teachers, in two special schools, in the interior of the state of Rio Grande do Sul. Each one of these interviews was compound of a range of questions, dealing with topics such as teacher’s identification, etiologic notions about the syndrome, intellectual development and clinical characteristics of the children, ways of educational intervention and finally the difficulties and feelings of the teachers concerning their work in this area and also their educational strategies. The analysis of the obtained material revealed that there are similarities and differences in the way in which the teachers perceive their students with the Down’s syndrome or Autism. One fundamental aspect which was identified related to the circumstances that led the teacher to work with these children, which were not always founded on choice. One of the concerns, which mostly differentiated the teacher’s discourse, was in relation to pleasure when working with these children. This appears more clearly regarding the students with Down’s syndrome, indicating a feeling of well-being and satisfaction of the teacher, due to the social reciprocity and communication in the relationship with the children. On the other hand, stereotyped ideas; worries with behaviors that are not specific to the anxiety and lack of self-confidence were aspects which characterized the teacher’s perception about autism. This picture might have influenced their management strategies. For example, in order to alleviate their conflicts and anxieties the teachers used strategies to maintain the students systematically busy to attempt to “control” the autism. However, the practice of “sheltering” by means of flexible work and encouragement of the autonomy based on the exercise of choice were also identified in some of the teachers. Another aspect that deserves attention is in the relation to the beliefs about the etiology of autism, specifically those concerning the mother-child bond. A simplistic view of this issue was identified, which was understood as a direct relationship of “cause and effect” rather as a reciprocal process, where each element of the dyad contributes to its quality. Finally, the results of this paper point to a complexity but not impossibility of the educational process of the so-called “special” student. However, attention should be paid to the need of founding the educational practice on knowledge, thus avoiding the emergency of distorted ideas and subsequently practices incoherent with the individual’s development.
Resumo:
The aim of the present study was to evaluate the in vivo antimicrobial activity of 2% chlorhexidine gluconate (FCFRP-USP) used as a root canal irrigating solution in teeth with pulp necrosis and radiographically visible chronic periapical reactions. Culture techniques and measurement of the inhibition zone were used. Twenty-two root canals of incisors and molars of 12 patients were used. After accessing the canal, the first root canal sample was collected with two sterile paper points that were transferred to a tube containing reduced transport fluid. The root canal was instrumented using chlorhexidine solution. A small sterile cotton pellet was placed at the root canal entrance, and the cavity was sealed with zinc oxide-eugenol cement. The canals were maintained empty for 48 h. Three sterile paper points were then introduced to absorb the root canal fluid (second sample). One paper point was placed on an agar plate inoculated with Micrococcus luteus ATCC 9341 and incubated for 24 h at 37°C, and the other two were submitted to microbiological evaluation. Present in 10 cases at baseline, mutans streptococci was reduced by 100% at the second assessment. Treatment showed an efficiency of 77.78% for anaerobic microorganisms at the second assessment. These data suggest that chlorhexidine prevents microbial activity in vivo with residual effects in the root canal system up to 48 h. Copyright © 1999 by The American Association of Endodontists.
Resumo:
AIM: Alveolitis is considered a disturbance of the alveolar healing process that is characterized by blood clot disintegration, alveolar wall infection and extreme pain. Several substances have been investigated to improve healing and guarantee postoperative comfort to patients. The aim of this study was to evaluate, microscopically, in rats, the healing process in non-infected tooth sockets, after application of a 10% metronidazole and 2% lidocaine dressing, using lanolin as vehicle and mint as flavoring. METHODS: Forty-five rats (Rattus norvegicus albinus, Wistar) had their right incisor extracted and were randomly assigned to 3 groups (n=15): Group I (control): the sockets were filled with blood clot; Group II: application of adrenaline solution at 1:1 000 with an absorbent paper point during 1 min plus filling of the socket with a 10% metronidazole and 2% lidocaine dressing, with lanolin as vehicle, and mint as flavoring; Group III: filling of the socket with the 10% metronidazole and 2% lidocaine dressing, with lanolin as vehicle and mint as flavoring. After 6, 15 and 28 days postoperatively, 5 animals per group were euthanized with an injectable anesthetic overdose. Histological and statistical analyses were performed. RESULTS: The results showed that the 10% metronidazole and 2% lidocaine dressing with lanolin as vehicle and mint as flavoring yielded similar response as that of the normal repair group and may be used to prevent the onset of alveolitis in those cases in which any predisposing factor is present. CONCLUSIONS: The use of this dressing has shown a good postoperative patient's comfort and does not cause a significant delay in the alveolar healing process.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Short cooking time and ability to blend varieties of food ingredients have made extrusion cooking a medium for low-cost and nutritionally improved food products. The effect of moisture, extrusion temperature and amount of turmeric flour mixed with cassava flour on physical characteristic of puffed snacks was evaluated in this work. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Results showed effect of extrusion parameters on dependents variables. High expansion, low browning, low water solubility index, intermediate water absorption index and high crispness desirable characteristics to puffed snacks are obtained in conditions of 12% moisture, 5% turmeric flour, 105º C of temperature and 250 rpm of screw speed. These paper point to the potential still unexplored of the use of flours of cassava and turmeric as raw materials in the development of extruded puffed snacks.
Resumo:
Pós-graduação em Design - FAAC
Resumo:
AIMS: To assess the impact of different implant systems on the clinical conditions and the microbiota at implants, and whether the presence of bacteria at tooth sites was predictive of the presence at implant sites. MATERIALS AND METHODS: Subjects with either AstraTech or Brånemark in function for 7 years were enrolled. Sub-gingival bacterial samples at tooth and implant sites were collected with sterile endodontic paper points, and analyzed by the checkerboard DNA-DNA hybridization method (40 species). RESULTS: Fifty-four subjects, 27 supplied with AstraTech (n=132 implants) and 27 with Brånemark (n=102) implants, were studied. Test tooth sites had significantly less evidence of bleeding on probing (P<0.001) and presence of plaque (P<0.001) than implant test sites. Implant sites presented with deeper probing pocket depth than tooth sites (mean difference: 1.1 mm, standard error of differences: 0.08, 95% confidence intervals (CI): 0.9-1.3, P<0.001). Tannerella forsythia (P<0.05), Capnocytophaga sputigena (P<0.05), Actinomyces israelii (P<0.05) and Lactobacillus acidophilus (P<0.05) were found at higher levels at tooth surfaces. No differences in bacterial load for any species were found between the two implant systems. The odds of being present/absent at tooth and implants sites were only significant for Staphylococcus aureus [odds ratio (OR): 5.2 : 1, 95% CI: 1.4-18.9, P<0.01]. CONCLUSIONS: After 7 years in function, implants presented with deeper probing depths than teeth. S. aureus was commonly present at both teeth and implants sites. S. aureus at tooth sites was predictive of also being present at implant sites.
Resumo:
OBJECTIVES The aim of the present longitudinal study was to investigate bacterial colonization of the internal implant cavity and to evaluate a possible association with peri-implant bone loss. METHODS A total of 264 paper point samples were harvested from the intra-implant cavity of 66 implants in 26 patients immediately following implant insertion and after 3, 4, and 12 months. Samples were evaluated for Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella intermedia, Treponema denticola, and Tannerella forsythia as well as total bacterial counts by real-time PCR. Bone loss was evaluated on standardized radiographs up to 25 months after implant insertion. For the statistical analysis of the data, mixed effects models were fitted. RESULTS There was an increase in the frequency of detection as well as in the mean counts of the selected bacteria over time. The evaluation of the target bacteria revealed a significant association of Pr. intermedia at 4 and 12 months with peri-implant bone loss at 25 months (4 months: P = 0.009; 12 months: P = 0.021). CONCLUSIONS The present study could demonstrate a progressive colonization by periodontopathogenic bacteria in the internal cavities of two-piece implants. The results suggest that internal colonization with Pr. intermedia was associated with peri-implant bone loss.
Resumo:
Paper submitted to the Sixth International Conference on Social Science Methodology, Amsterdam, The Netherlands, August 16-20, 2004.
Resumo:
Letter on Long Point Company letterhead addressed to W.D. Woodruff of Lincoln Paper Mills, Merritton, Ontario in which Frank Reid, secretary of Long Point Company encloses a copy of the by-laws and the dates of incorporation, as requested (1 page, typed) [by-laws are not included here], Jan. 18, 1916.
Resumo:
From the Executive Summary. Europe’s financial and sovereign debt crises have become increasingly interconnected. In order to break the negative feedback loop between the two, the EU has decided to create a common supervisory framework for the banking sector: the Single Supervisory Mechanism (SSM). The SSM will involve a supervisory system including both the national supervisors and the European Central Bank (ECB). By endowing the ECB with supervisory authority over a major part of the European banking sector, the SSM’s creation will result in a shake-up of the way in which the European financial sector is being supervised. Under the right circumstances, this could be a major step forward in addressing Europe’s interconnected crises.
Resumo:
Clear qualitative changes have taken place in relations between the European Union and its Eastern neighbours over the past year. The European Neighbourhood Policy (ENP) has been playing a significant part in the context of these changes. In the cases of Moldova and Ukraine, which are the countries interested in enhancing co-operation with the EU, the ENP has provided a formula that allows taking steps to implement this objective. The ENP has also contributed to "outlining an alternative" to Belarus' current self-isolation. However, the ENP has first of all given a clear message to Russia by specifying the EU's interests and objectives concerning Eastern Europe. The ENP has clearly stated that the EU wants to build democracy and a free market in those countries, and has signalled that the European Union intends to discuss the issues concerning the countries directly with them, and not through Moscow's offices.