Design of Scaled Bridge Prototype for Energy Harvesting Testing

Energy harvesting from ambient vibration is a promising field, especially for applications in larger infrastructures such as bridges. These structures are more frequently monitored for damage detection because of their extended life, increased traffic load and environmental deterioration. In this regard, the possibility of sourcing the power necessary for the sensors from devices embedded in the structure, thus cutting the cost due to the management of battery replacing over the lifespan of the structure, is particularly attracting. Among others, piezoelectric devices have proven to be especially effective and easy to apply since they can be bonded to existing host structure. For these devices the energy harvesting capacity is achieved directly from the variation in the strain conditions from the surface of the structure. However these systems need to undergo significant research for optimisation of their harvesting capacity and for assessing the feasibility of application to various ranges of bridge span and load. In this regard scaled bridge prototypes can be effectively used not only to assess numerical models and studies in an inexpensive and repeatable way but also to test the electronic devices under realistic field conditions. In this paper the theory of physical similitude is applied to the design of bridge beams with embedded energy harvesting systems and health monitoring sensors. It will show both how bridge beams can be scaled in such a way to apply and test energy harvesting systems and 2) how experimental data from existing bridges can be applied to prototypes in a laboratory environment. The study will be used for assessing the reliability of the system over a train bridge case study undergoing a set load cycles and induced localised damage.

The feasibility of a sustainable energy, driver-only electric commuter vehicle for New Zealand

This paper investigates whether low technology driver-only, battery electric commuter vehicles are feasible for New Zealand. Personal passenger transport faces several challenges in the coming decades: depletion of cheap oil reserves, increasing congestion, localised pollution, the need for reduced carbon emissions and the long term goal of sustainability. One way of solving some of these problems could be to introduce low cost, comfortable, energy efficient, driver-only electric vehicles. These would still give the driver a weatherproof, safe and comfortable means of commuting, but at a fraction of the energy and running costs of conventional petrol/diesel cars. To help assess their viability, the performance and energy use of the E-POD electric commuter vehicle is used as a benchmark. The work shows that such a vehicle could be made cheaply, using readily available technology with a range of 180km and a top speed of over 90km/h. The chassis could be made from natural fibre composite materials that might reduce significantly the embedded energy required for its manufacture. The electricity taken from the grid to charge the batteries could be replaced by electricity generated from grid connected photovoltaic panels mounted on the garage roof of the vehicle owner.

Análise energética e ambiência de modelos arquitetônicos propostos pelo programa nacional de habitação rural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Repercusión medioambiental del uso de la cerámica estructural en España. Energía embebida y huella de carbono

La producción y el transporte a obra de los productos cerámicos de carácter estructural suponen un importante consumo energético, que conlleva la emisión de gases de efecto invernadero a la atmósfera. El objetivo de la presente Tesis es demostrar la existencia de importantes diferencias en el valor del impacto ambiental asociado a los productos de cerámica estructural fabricados en España, y que estas diferencias podrían quedar cuantificadas y reflejadas mediante un análisis de Huella de Carbono y de la Energía Embebida. Se parte de la inexistencia en España, de base de datos contrastada y consensuada, que establezca las cargas medioambientales en función del tipo de producto cerámico a utilizar. Se realiza en la primera parte del estudio una revisión del estado actual de la Huella de Carbono y la Energía Embebida en el campo de los materiales de construcción, y más concretamente en el sector de la cerámica estructural, que sirve para acotar los límites del estudio y justificar el objeto de la Tesis. La investigación se acota a las etapas de producción y transporte a obra de los productos (estudio cuna a puerta con opciones), al considerar que son éstas, a priori, las que tienen una mayor incidencia en el comportamiento ambiental del producto. Siguiendo los pasos definidos en la normativa aplicable (definición del mapa de procesos – límites y alcance – inventario – cálculo y evaluación), se establece un método específico de identificación y cuantificación de las variables que determinan la Huella de Carbono y Energía Embebida de los productos cerámicos, en función de la tipología de producto. La información necesaria (inventario) se obtiene principalmente con recogida de datos “in situ” de fábricas de productos cerámicos, lo que garantiza que la información tratada en este estudio es de primer nivel. La información se complementa/contrasta con fuentes bibliográficas. Se determinan 6 variables con influencia global en el impacto ambiental, 44 variables principales y 39 secundarias, estableciendo las fórmulas de cálculo a partir de dichas variables. Los resultados de cálculo y evaluación determinan que, para unas mismas condiciones de fabricación, las diferencias entre productos cerámicos llegan hasta un 27% para la Huella de Carbono y un 35% para Energía Embebida. La relevancia que alcanza el impacto asociado al transporte del producto a obra puede llegar hasta un 40% del total. El método de cálculo y las fórmulas desarrolladas se integran en una hoja de cálculo, para el cálculo de Huella de Carbono y Energía Embebida de los productos cerámicos, que permite, a su vez, conocer la repercusión medioambiental que tiene la introducción de modificaciones o innovaciones en el proceso de producción o transporte a obra. Así mismo, el trabajo desarrollado ha servido para poner en relieve una serie de problemas y falta de información en el campo de la cerámica estructural y el medioambiente que pueden ser objeto de futuras líneas de investigación, tanto para el sector de la edificación como para la comunidad científica, pudiendo implementar la metodología desarrollada en otras investigaciones. Se considera que la investigación realizada y sus resultados suponen una aportación importante para conocer y reducir el impacto ambiental de los edificios, desde la perspectiva del ciclo de vida y considerando que el impacto ambiental de un edificio comienza desde el momento en que se extraen las materias primas para la fabricación de los materiales con los que se construyen los edificios. ABSTRACT The production and transport of structural ceramic products involves an important energy consumption, which leads to the emission of greenhouse gases into the atmosphere. The objective of the research is to demonstrate the existence of significant differences in the value of the environmental impact of structural ceramic products manufactured in Spain, and these differences could be quantified by the Carbon Footprint and Embodied Energy. It starts from the absence in Spain, of contrasted and agreed databases that establish the environmental loads depending on the type of ceramic product. In the first part of the study reviews the current state of the Carbon Footprint and Embedded Energy in the field of building materials, and more specifically in the field of structural ceramics, which serves to limit the scope of the study and justify the purpose of this Thesis. The Research is bounded to production and transportation stages of (cradle to gate with options), considering they are the stages that have a greater impact on the environmental performance of the product. Following the steps defined in applicable rules (definition of process map - boundaries and scope – inventory analysis- calculation and impact assessment), it sets a specific method for the identification and quantification of the variables that determine the Carbon Footprint and Embedded Energy of structural ceramic products, depending on the type of product. The information (inventory) is given mainly with a data collection in ceramic factories (and in a consultation with the manufactures of the products), ensuring that the information handled in this Thesis is a first rate data. It is established 6 variables with a global influence in the environmental impact, 44 primary and 39 secondary variables, establishing calculation formula from these variables. The results of calculation and assessment determined that, for same manufacturing conditions, the differences between ceramic products reach 27% for Carbon Footprint and 35% for Embodied Energy. The relevance that reaches the impact of transport can reach 40% of the total. The method of calculation and formulas developed are integrated into a simple calculation tool, excel base, to calculate the Carbon Footprint and Embodied Energy of structural ceramic products, which allows, know the environmental impact of changes or innovations in the production process or transport to work. The work also has served to find a problems and gaps in the field of structural ceramics and the environment that may well be the subject of future research, both for the building sector to the scientific community, implementing the methodology developed in other research. It is considered that the research and its results represent an important contribution to understand and reduce the environmental impact of buildings from the perspective of the life cycle, considering that the environmental impact of a building starts from the time that the raw materials are extracted for the manufacture of building materials.

Electron ground state energy level determination of ZnSe self-organized quantum dots embedded in ZnS

Optical and electrical characterization of the ZnS self-organized quantum dots (QDs) embedded in ZnS by molecular beam epitaxy have been investigated using photoluminescence (PL), capacitance-voltage (C-V), and deep level transient Fourier spectroscopy (DLTFS) techniques. The temperature dependence of the free exciton emission was employed to clarify the mechanism of the PL thermal quenching processes in the ZnSe QDs. The PL experimental data are well explained by a two-step quenching process. The C-V and DLTFS techniques were used to obtain the quantitative information on the electron thermal emission from the ZnSe QDs. The correlation between the measured electron emission from the ZnSe QDs in the DLTFS and the observed electron accumulation in the C-V measurements was clearly demonstrated. The emission energy for the ground state of the ZnSe QDs was determined to be at about 120 meV below the conduction band edge of the ZnS barrier, which is in good agreement with the thermal activation energy, 130 meV, obtained by fitting the thermal quenching process of the free exciton PL peak. (C) 2003 American Institute of Physics.

Energy and entropy radiated by a black hole embedded in a de Sitter braneworld

We study the Hawking radiation of a (4+n)-dimensional Schwarzschild black hole imbedded in space-time with a positive cosmological constant. The greybody and energy emission rates of scalars, fermions, bosons, and gravitons are calculated in the full range of energy. Valuable information on the dimensions and curvature of space-time is revealed. Furthermore, we investigate the entropy radiated and lost by black holes. We find their ratio near 1 in favor of the Bekenstein's conjecture.

Energy harvesting embedded wireless sensor system for building environment applications

For many wireless sensor networks applications, indoor light energy is the only ambient energy source commonly available. Many advantages and constraints co-exist in this technology. However, relatively few indoor light powered harvesters have been presented and much research remains to be carried out on a variety of related design considerations and trade-offs. This work presents a solution using the Tyndall mote and an indoor light powered wireless sensor node. It analyses design considerations on several issues such as indoor light characteristics, solar panel component choice, maximum power point tracking, energy storage elements and the trade-offs and choices between them.

Energy versus data integrity trade-offs in embedded high-density logic compatible dynamic memories

Current variation aware design methodologies, tuned for worst-case scenarios, are becoming increasingly pessimistic from the perspective of power and performance. A good example of such pessimism is setting the refresh rate of DRAMs according to the worst-case access statistics, thereby resulting in very frequent refresh cycles, which are responsible for the majority of the standby power consumption of these memories. However, such a high refresh rate may not be required, either due to extremely low probability of the actual occurrence of such a worst-case, or due to the inherent error resilient nature of many applications that can tolerate a certain number of potential failures. In this paper, we exploit and quantify the possibilities that exist in dynamic memory design by shifting to the so-called approximate computing paradigm in order to save power and enhance yield at no cost. The statistical characteristics of the retention time in dynamic memories were revealed by studying a fabricated 2kb CMOS compatible embedded DRAM (eDRAM) memory array based on gain-cells. Measurements show that up to 73% of the retention power can be saved by altering the refresh time and setting it such that a small number of failures is allowed. We show that these savings can be further increased by utilizing known circuit techniques, such as body biasing, which can help, not only in extending, but also in preferably shaping the retention time distribution. Our approach is one of the first attempts to access the data integrity and energy tradeoffs achieved in eDRAMs for utilizing them in error resilient applications and can prove helpful in the anticipated shift to approximate computing.

Energy evaporation: the new concept of indoor systems for WPT and EH embedded into the floor

This work introduces a novel idea for wireless energy transfer, proposing for the first time the unit-cell of an indoor localization and RF harvesting system embedded into the floor. The unit-cell is composed by a 5.8 GHz patch antenna surrounded by a 13.56 MHz coil. The coil locates a device and activate the patch which, connected to a power grid, radiates to wirelessly charge the localized device. The HF and RF circuits co-existence and functionality are demonstrated in this paper, the novelty of which is also in the adoption of low cost and most of all ecofriendly materials, such as wood and cork, as substrates for electronics.

Performance optimization for energy-aware adaptive checkpointing in embedded real-time systems

Using additional store-checkpoinsts (SCPs) and compare-checkpoints (CCPs), we present an adaptive checkpointing for double modular redundancy (DMR) in this paper. The proposed approach can dynamically adjust the checkpoint intervals. We also design methods to calculate the optimal numbers of checkpoints, which can minimize the average execution time of tasks. Further, the adaptive checkpointing is combined with the DVS (dynamic voltage scaling) scheme to achieve energy reduction. Simulation results show that, compared with the previous methods, the proposed approach significantly increases the likelihood of timely task completion and reduces energy consumption in the presence of faults.

Energy harvesting from piezoelectric devices embedded in a 3D printed wing

This thesis work has been carried out at Clarkson University in Potsdam NY, USA and involved the design of a low elongation wing, consisting of parts made by polylactide (PLA) using the fused deposition model (FDM) technology of Rapid Prototyping, then assembled together in a thin aluminum spar. The aim of the research is to evaluate the feasibility of collecting electrical energy by converting mechanical energy from the vibration of the wing flutter. With this aim piezoelectric stripes were glued in the inner part of the wing, as well as on the aluminum spar, as monomorphic configuration. During the phases of the project, particular attention was given to the geometry and the materials used, in order to trigger the flutter for low flow velocity. The CAD software SolidWorks® was used for the design of the wing and then the drawings were sent to the Clarkson machine shop in order to to produce the parts required by the wing assembly. FEM simulations were performed, using software MSC NASTRAN/PATRAN®, to evaluate the stiffness of the whole wing as well as the natural vibration modes of the structure. These data, in a first approximation, were used to predict the flutter speed. Finally, experimental tests in the Clarkson wind tunnel facility were carried out in order to validate the results obtained from FEM analysis. The power collected by the piezoelectrics under flutter condition was addressed by tuning the resistors downstream the electronic circuit of the piezoelectrics.

Cost and energy efficient reconfigurable embedded platform using Spartan-6 FPGAs

Modern FPGAs with run-time reconfiguration allow the implementation of complex systems offering both the flexibility of software-based solutions combined with the performance of hardware. This combination of characteristics, together with the development of new specific methodologies, make feasible to reach new points of the system design space, and make embedded systems built on these platforms acquire more and more importance. However, the practical exploitation of this technique in fields that traditionally have relied on resource restricted embedded systems, is mainly limited by strict power consumption requirements, the cost and the high dependence of DPR techniques with the specific features of the device technology underneath. In this work, we tackle the previously reported problems, designing a reconfigurable platform based on the low-cost and low-power consuming Spartan-6 FPGA family. The full process to develop the platform will be detailed in the paper from scratch. In addition, the implementation of the reconfiguration mechanism, including two profiles, is reported. The first profile is a low-area and low-speed reconfiguration engine based mainly on software functions running on the embedded processor, while the other one is a hardware version of the same engine, implemented in the FPGA logic. This reconfiguration hardware block has been originally designed to the Virtex-5 family, and its porting process will be also described in this work, facing the interoperability problem among different families.

Energy/power consumption model for an embedded processor board

This dissertation, whose research has been conducted at the Group of Electronic and Microelectronic Design (GDEM) within the framework of the project Power Consumption Control in Multimedia Terminals (PCCMUTE), focuses on the development of an energy estimation model for the battery-powered embedded processor board. The main objectives and contributions of the work are summarized as follows: A model is proposed to obtain the accurate energy estimation results based on the linear correlation between the performance monitoring counters (PMCs) and energy consumption. the uniqueness of the appropriate PMCs for each different system, the modeling methodology is improved to obtain stable accuracies with slight variations among multiple scenarios and to be repeatable in other systems. It includes two steps: the former, the PMC-filter, to identify the most proper set among the available PMCs of a system and the latter, the k-fold cross validation method, to avoid the bias during the model training stage. The methodology is implemented on a commercial embedded board running the 2.6.34 Linux kernel and the PAPI, a cross-platform interface to configure and access PMCs. The results show that the methodology is able to keep a good stability in different scenarios and provide robust estimation results with the average relative error being less than 5%. Este trabajo fin de máster, cuya investigación se ha desarrollado en el Grupo de Diseño Electrónico y Microelectrónico (GDEM) en el marco del proyecto PccMuTe, se centra en el desarrollo de un modelo de estimación de energía para un sistema empotrado alimentado por batería. Los objetivos principales y las contribuciones de esta tesis se resumen como sigue: Se propone un modelo para obtener estimaciones precisas del consumo de energía de un sistema empotrado. El modelo se basa en la correlación lineal entre los valores de los contadores de prestaciones y el consumo de energía. Considerando la particularidad de los contadores de prestaciones en cada sistema, la metodología de modelado se ha mejorado para obtener precisiones estables, con ligeras variaciones entre escenarios múltiples y para replicar los resultados en diferentes sistemas. La metodología incluye dos etapas: la primera, filtrado-PMC, que consiste en identificar el conjunto más apropiado de contadores de prestaciones de entre los disponibles en un sistema y la segunda, el método de validación cruzada de K iteraciones, cuyo fin es evitar los sesgos durante la fase de entrenamiento. La metodología se implementa en un sistema empotrado que ejecuta el kernel 2.6.34 de Linux y PAPI, un interfaz multiplataforma para configurar y acceder a los contadores. Los resultados muestran que esta metodología consigue una buena estabilidad en diferentes escenarios y proporciona unos resultados robustos de estimación con un error medio relativo inferior al 5%.