Semantiikan hyödyntäminen dokumenttienhallinnassa

Työn tavoitteena on etsiä asiakasyritykselle sähköteknisen dokumentoinnin hallintaan sopiva järjestelmäratkaisu vertailemalla insinööritoimistojen käyttämien suunnittelujärjestelmien ja yleisten dokumenttien hallintajärjestelmien soveltuvuutta asiakasympäristöön. Työssä tutkitaan sopivien metatietojen kuvaustapojen käyttökelpoisuutta sähköteknisen dokumentoinnin hallintaan esimerkkiprojektien avulla. Työn sisältö koostuu neljästä pääkohdasta. Ensimmäisessä jaksossa tarkastellaan dokumentin ominaisuuksia ja elinkaarta luonnista aktiivikäyttöön, arkistointiin ja hävitykseen. Samassa yhteydessä kerrotaan dokumenttienhallinnan perustehtävistä. Toisessa jaksossa käsitellään dokumenttien kuvailun tavoitteita, kuvailusuosituksia ja -standardeja sekä luonnollisen kielen käyttöä sisällönkuvailussa. Tarkastelukohteina suosituksista ovat W3C:n julkaisemat suositukset, Dublin Core, JHS 143 ja SFS-EN 82045. Kolmannessa jaksossa tarkastellaan teollisuuden dokumentoinnin ominaispiirteitä ja käyttötarkoitusta. Teollisuudessa on monia erilaisia järjestelmäympäristöjä tehtaan sisällä ja työssä kuvataan dokumenttienhallinnan integrointitarpeita muihin järjestelmiin. Viimeisessä jaksossa kuvaillaan erilaisia dokumentoinnin hallintaympäristöjä alkaen järeimmästä päästä tuotetiedon hallintajärjestelmistä siirtyen pienempiinsuunnittelujärjestelmiin ja lopuksi yleisiin dokumenttien hallintajärjestelmiin. Tässä osassa on myös luettelo ohjelmistotoimittajista. Työn tuloksena on laadittu valituista dokumenttityypeistä metatietokuvaukset kahden eri kuvaustavan (JHS 143 ja SFS-EN 82045) avulla ja on todettu molemmat kuvaustavat käyttökelpoisiksi sähköteknisen dokumentoinnin käsittelyyn.Nämä kuvaukset palvelevat asiakasta dokumenttienhallintaprojektin määrittelytyössä. Asiakkaalle on tehty myös vertailu sopivista järjestelmävaihtoehdoista hankintaa varten.

The Value Of Audiovisual Archives.

347

Power Electronics Didactic Modules for Direct Current Machine Control

Several didactic modules for an electric machinery laboratory are presented. The modules are dedicated for DC machinery control and get their characteristic curves. The didactic modules have a front panel with power and signal connectors and can be configurable for any DC motor type. The three-phase bridge inverter proposed is one of the most popular topologies and is commercially available in power package modules. The control techniques and power drives were designed to satisfy static and dynamic performance of DC machines. Each power section is internally self-protected against misconnections and short-circuits. Isolated output signals of current and voltage measurements are also provided, adding versatility for use either in didactic or research applications. The implementation of such modules allowed experimental confirmation of the expected performance.

Indoor air quality in Portuguese archives: a snapshot on exposure levels

Indoor air quality recently entered legislation in Portugal. Several parameters must be evaluated and kept within limits in order to obtain a certification for air quality and energy consumption. Certification parameters were analyzed in two Portuguese archives in order to assess indoor air quality both for people attending or working on these premises and for maintenance of a written heritage that must be retained for future generations. Carbon monoxide (CO) and carbon dioxide (CO2), formaldehyde, and fungal counts were kept within stipulated limits. Relative humidity (RH), volatile organic compounds (VOC), particulate matter (PM10), and ozone (O3) showed values above legislated levels and justified the implementation of corrective measures. In terms of conservation, studies on the limit values are still needed, but according to the available international guidelines, some of the analyzed parameters such as PM10, O3, and RH were also above desirable values. Corrective measures were proposed to these institutions. Although this study was only of a short duration, it proved valuable in assessing potential eventual problems and constitutes the first Portuguese indoor air quality assessment taking into consideration both aspects of an archive such as human health and heritage safekeeping.

Mould and yeast identification in archival settings: preliminary results on the use of traditional methods and molecular biology options in Portuguese archives

This project was developed to fully assess the indoor air quality in archives and libraries from a fungal flora point of view. It uses classical methodologies such as traditional culture media – for the viable fungi – and modern molecular biology protocols, especially relevant to assess the non-viable fraction of the biological contaminants. Denaturing high-performance liquid chromatography (DHPLC) has emerged as an alternative to denaturing gradient gel electrophoresis (DGGE) and has already been applied to the study of a few bacterial communities. We propose the application of DHPLC to the study of fungal colonization on paper-based archive materials. This technology allows for the identification of each component of a mixture of fungi based on their genetic variation. In a highly complex mixture of microbial DNA this method can be used simply to study the population dynamics, and it also allows for sample fraction collection, which can, in many cases, be immediately sequenced, circumventing the need for cloning. Some examples of the methodological application are shown. Also applied is fragment length analysis for the study of mixed Candida samples. Both of these methods can later be applied in various fields, such as clinical and sand sample analysis. So far, the environmental analyses have been extremely useful to determine potentially pathogenic/toxinogenic fungi such as Stachybotrys sp., Aspergillus niger, Aspergillus fumigatus, and Fusarium sp. This work will hopefully lead to more accurate evaluation of environmental conditions for both human health and the preservation of documents.

Particulate matter distribution in selected Portuguese archives: a preliminary study

Particulate matter (PM) can have a significant impact on human health and on artifacts stored and kept inside museums and archives. To the author's knowledge, its immediate and/or longterm concentrations and distribution on Portuguese archives has never been determined. Four Portuguese archives (with and without HVAC/air filtration systems) were selected and the immediate concentration of airborne particulate matter was measured by active sampling. Indoor-outdoor ratios were also determined. International and national guidelines were used to ascertain the environment’s quality, both for the readers and staff and for the documents preserved in these institutions. Inside, PM2.5 ranged between 0.37μg/m3 and 27.61μg/m3, while PM10 ranged between 4.43μg/m3 and 285.52μg/m3. The lowest values were determined in storage rooms and the highest in reading rooms. In terms of human health, Portuguese guidelines for immediate PM10 concentration were not met in several locations. For conservation purposes, storage rooms were classified according to an original air quality grid. Air filtration systems proved valuable in maintaining a safe environment for our written heritage and the staff and readers that deal with it and care for it every day. This study constitutes the first snapshot of the particulate matter concentrations and distribution in Portuguese Archives.

Detection and diagnosis solutions for fault-tolerant VSI

This paper presents solutions for fault detection and diagnosis of two-level, three phase voltage-source inverter (VSI) topologies with IGBT devices. The proposed solutions combine redundant standby VSI structures and contactors (or relays) to improve the fault-tolerant capabilities of power electronics in applications with safety requirements. The suitable combination of these elements gives the inverter the ability to maintain energy processing in the occurrence of several failure modes, including short-circuit in IGBT devices, thus extending its reliability and availability. A survey of previously developed fault-tolerant VSI structures and several aspects of failure modes, detection and isolation mechanisms within VSI is first discussed. Hardware solutions for the protection of power semiconductors with fault detection and diagnosis mechanisms are then proposed to provide conditions to isolate and replace damaged power devices (or branches) in real time. Experimental results from a prototype are included to validate the proposed solutions.

An integrated reusable remote laboratory to complement electronics teaching

The great majority of the courses on science and technology areas where lab work is a fundamental part of the apprenticeship was not until recently available to be taught at distance. This reality is changing with the dissemination of remote laboratories. Supported by resources based on new information and communication technologies, it is now possible to remotely control a wide variety of real laboratories. However, most of them are designed specifically to this purpose, are inflexible and only on its functionality they resemble the real ones. In this paper, an alternative remote lab infrastructure devoted to the study of electronics is presented. Its main characteristics are, from a teacher's perspective, reusability and simplicity of use, and from a students' point of view, an exact replication of the real lab, enabling them to complement or finish at home the work started at class. The remote laboratory is integrated in the Learning Management System in use at the school, and therefore, may be combined with other web experiments and e-learning strategies, while safeguarding security access issues.

Academic effectiveness of VISIR remote lab in analog electronics

The effectiveness of VISIR is compared to other experimentation activities under the point of view presented by the professor Soysal in 2000. Advantages and limitations are discussed in terms of equipment availability, infrastructure cost, and contribution to various elements of experimental learning.

Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

Printed electronics for ubiquitous computing applications

Dissertação para obtenção do Grau de Doutor em Química

Aux archives de l'animisme. Ethnographie et théorie de la "religion sauvage" chez Edward Tylor

En 1871, Edward Tylor rejeta fermement les récits de son temps qui niaient l'existence de croyances religieuses chez certains peuples alors considérés comme sauvages. C'était le cas, tout particulièrement, de l'explorateur victorien Samuel Baker, dont l'autorité ethnographique fut mise en cause à travers la citation de quelques voyageurs étrangers, dont deux français, qui avaient également observé les peuples nilotiques. Contrairement à d'autres sources de Primitive Culture, la qualité de ces ethnographies oubliées était, hélas, tout à fait médiocre ; mais elles permirent à Tylor de faire l'une des affirmations les plus décisives de son œuvre, celle de l'universalité de l'animisme. Ce passage capital - concernant des peuples qui deviendront célèbres dans l'histoire de l'anthropologie, à commencer par les Nuer - recèle par ailleurs une dimension additionnelle. Tylor voulait élargir à tout être spirituel les critères d'identification d'une religion, sauf que les ethnographes du Nil Blanc suggéraient que ces rudes populations croyaient bel et bien en un être suprême. Le dossier du monothéisme était comme anticipé par la force de ces données ; mais il ne faut pas y voir une contradiction de la part de Tylor. Au contraire, cette dialectique imprévue entre l'ethnographie et la théorie permet de mieux saisir la portée du concept d'animisme dont il fut le créateur.