The impacts of learning styles, learning patterns and demographic factors on learners’ performance in a blended learning environment

Many studies have widely accepted the assumption that learning processes can be promoted when teaching styles and learning styles are well matched. In this study, the synergy between learning styles, learning patterns, and gender as a selected demographic feature and learners’ performance were quantitatively investigated in a blended learning setting. This environment adopts a traditional teaching approach of ‘one-sizefits-all’ without considering individual user’s preferences and attitudes. Hence, evidence can be provided about the value of taking such factors into account in Adaptive Educational Hypermedia Systems (AEHSs). Felder and Soloman’s Index of Learning Styles (ILS) was used to identify the learning styles of 59 undergraduate students at the University of Babylon. Five hypotheses were investigated in the experiment. Our findings show that there is no statistical significance in some of the assessed factors. However, processing dimension, the total number of hits on course website and gender indicated a statistical significance on learners’ performance. This finding needs more investigation in order to identify the effective factors on students’ achievement to be considered in Adaptive Educational Hypermedia Systems (AEHSs).

Remediation strategies of shaft and common mode voltages in adjustable speed drive systems

AC motors are largely used in a wide range of modern systems, from household appliances to automated industry applications such as: ventilations systems, fans, pumps, conveyors and machine tool drives. Inverters are widely used in industrial and commercial applications due to the growing need for speed control in ASD systems. Fast switching transients and the common mode voltage, in interaction with parasitic capacitive couplings, may cause many unwanted problems in the ASD applications. These include shaft voltage and leakage currents. One of the inherent characteristics of Pulse Width Modulation (PWM) techniques is the generation of the common mode voltage, which is defined as the voltage between the electrical neutral of the inverter output and the ground. Shaft voltage can cause bearing currents when it exceeds the amount of breakdown voltage level of the thin lubricant film between the inner and outer rings of the bearing. This phenomenon is the main reason for early bearing failures. A rapid development in power switches technology has lead to a drastic decrement of switching rise and fall times. Because there is considerable capacitance between the stator windings and the frame, there can be a significant capacitive current (ground current escaping to earth through stray capacitors inside a motor) if the common mode voltage has high frequency components. This current leads to noises and Electromagnetic Interferences (EMI) issues in motor drive systems. These problems have been dealt with using a variety of methods which have been reported in the literature. However, cost and maintenance issues have prevented these methods from being widely accepted. Extra cost or rating of the inverter switches is usually the price to pay for such approaches. Thus, the determination of cost-effective techniques for shaft and common mode voltage reduction in ASD systems, with the focus on the first step of the design process, is the targeted scope of this thesis. An introduction to this research – including a description of the research problem, the literature review and an account of the research progress linking the research papers – is presented in Chapter 1. Electrical power generation from renewable energy sources, such as wind energy systems, has become a crucial issue because of environmental problems and a predicted future shortage of traditional energy sources. Thus, Chapter 2 focuses on the shaft voltage analysis of stator-fed induction generators (IG) and Doubly Fed Induction Generators DFIGs in wind turbine applications. This shaft voltage analysis includes: topologies, high frequency modelling, calculation and mitigation techniques. A back-to-back AC-DC-AC converter is investigated in terms of shaft voltage generation in a DFIG. Different topologies of LC filter placement are analysed in an effort to eliminate the shaft voltage. Different capacitive couplings exist in the motor/generator structure and any change in design parameters affects the capacitive couplings. Thus, an appropriate design for AC motors should lead to the smallest possible shaft voltage. Calculation of the shaft voltage based on different capacitive couplings, and an investigation of the effects of different design parameters are discussed in Chapter 3. This is achieved through 2-D and 3-D finite element simulation and experimental analysis. End-winding parameters of the motor are also effective factors in the calculation of the shaft voltage and have not been taken into account in previous reported studies. Calculation of the end-winding capacitances is rather complex because of the diversity of end winding shapes and the complexity of their geometry. A comprehensive analysis of these capacitances has been carried out with 3-D finite element simulations and experimental studies to determine their effective design parameters. These are documented in Chapter 4. Results of this analysis show that, by choosing appropriate design parameters, it is possible to decrease the shaft voltage and resultant bearing current in the primary stage of generator/motor design without using any additional active and passive filter-based techniques. The common mode voltage is defined by a switching pattern and, by using the appropriate pattern; the common mode voltage level can be controlled. Therefore, any PWM pattern which eliminates or minimizes the common mode voltage will be an effective shaft voltage reduction technique. Thus, common mode voltage reduction of a three-phase AC motor supplied with a single-phase diode rectifier is the focus of Chapter 5. The proposed strategy is mainly based on proper utilization of the zero vectors. Multilevel inverters are also used in ASD systems which have more voltage levels and switching states, and can provide more possibilities to reduce common mode voltage. A description of common mode voltage of multilevel inverters is investigated in Chapter 6. Chapter 7 investigates the elimination techniques of the shaft voltage in a DFIG based on the methods presented in the literature by the use of simulation results. However, it could be shown that every solution to reduce the shaft voltage in DFIG systems has its own characteristics, and these have to be taken into account in determining the most effective strategy. Calculation of the capacitive coupling and electric fields between the outer and inner races and the balls at different motor speeds in symmetrical and asymmetrical shaft and balls positions is discussed in Chapter 8. The analysis is carried out using finite element simulations to determine the conditions which will increase the probability of high rates of bearing failure due to current discharges through the balls and races.

Foreign-currency and monetary geopolitics of United States and its effects on the future of the international system

The US dollar is still considered as the main strategic deposit among the currencies of different countries of the world and the policies of the World Bank and the International Financial Organizations have been and will always be influenced by the US economy. Despite the economic crises and commercial balance deficits in the United States, dollar has maintained its high position in and its domination over foreign exchanges and foreign-currency deposits of the countries. The novelty of the present research relies on its consideration of the political properties of the governments and the geopolitical effects of these countries on the position of their monetary and foreign-currency policies and consequently, on the international financial organizations such as the International Monetary Fund and the World Bank, which can determine the future of international economy and the political relations among countries. Our research proves that the political development of the United States and its geopolitical situation have been of the effective factors on dollar growth; and unless the competitors acquire such a relative advantage, they will not be able to seriously challenge the currency of dollar and the monetary policies of the United States, at least in a short time

Is a Majority Enough? Psychological Well-being and Its Relation to Academic and Prosocial Motivation, Self-regulation and Achievement at school

This cross-sectional study analyzed psychological well-being at school using the Self-Determination theory as a theoretical frame-work. The study explored basic psychological needs fulfillment (BPNS), academic (SRQ-A), prosocial self-regulation (SRQ-P) and motivation, and their relationship with achievement in general, special and selective education (N=786, 444 boys, 345 girls, mean age 12 yrs 8 mths). Motivation starts behavior which becomes guided by self-regulation. The perceived locus of control (PLOC) affects how self-determined this behavior will be; in other words, to what extent it is autonomously regulated. In order learn and thus to be able to accept external goals, a student has to feel emotionally safe and have sufficient ego-flexibility—all of which builds on satisfied psychological needs. In this study those conditions were explored. In addition to traditional methods Self-organizing maps (SOM), was used in order to cluster the students according to their well-being, self-regulation, motivation and achievement scores. The main impacts of this research were: a presentation of the theory based alternative of studying psychological well-being at school and usage of both the variable and person-oriented approach. In this Finnish sample the results showed that the majority of students felt well, but the well-being varied by group. Overall about for 11–15% the basic needs were deprived depending on the educational group. Age and educational group were the most effective factors; gender was important in relation to prosocial identified behavior. Although the person-oriented SOM-approach, was in a large extent confirming what was no-ticed by using comparison of the variables: the SEN groups had lower levels of basic needs fulfillment and less autonomous self-regulation, interesting deviations of that rule appeared. Some of the SEL- and GEN-group members ended up in the more unfavorable SOM-clusters, and not all SEN-group members belonged to the poorest clusters (although not to the best either). This evidence refines the well-being and self-regulation picture, and may re-direct intervention plans, and turn our focus also on students who might otherwise remain unnoticed. On the other hand, these results imply simultaneously that in special education groups the average is not the whole truth. On the basis of theoretical and empirical considerations an intervention model was sug-gested. The aim of the model was to shift amotivation or external motivation in a more intrinsic direction. According to the theoretical and empirical evidence this can be achieved first by studying the self-concept a student has, and then trying to affect both inner and environmental factors—including a consideration of the basic psychological needs. Keywords: academic self-regulation, prosocial self-regulation, basic psychological needs, moti-vation, achievement

Numerical study on the surface depression of the concrete runway pavement under impact load

Airport runway pavement always subjected to huge impact loading due to the hard landing of aircraft on the pavement surface. Therefore runway pavements should have sufficient impact resistance capability to avoid damage causing by hard impact like surface deflection in downward or penetration since the repair works is cumbersome within the operating condition of airport and also increases the service life cost of the pavement structure. Several research works have been carried out on airport runway pavement to measure the present condition of pavement and also to predict future performance of it. However, most of the works are confined by pavement response under moving aircraft loading. Nevertheless, no comprehensive research work is yet conducted to identify the controlling factors which might have significant effect in changing the common pavements damage like surface penetration depth under impact of aircraft. Therefore, a 3D FE study is conducted to determine some effective factors in controlling the top surface penetration depth of runway pavement. Among the exterior factors, mass of the impactor, velocity of the impactor, impact angle and boundary conditions are selected and as interior factors, thickness of the runway pavement, compressive strength and density of materials used in the runway pavement are selected.

Survey of reproductive physiology on Epinephelus coioides in Khozestan province, Persian Gulf

Epinephelus coioides (family serranidae) is protogynous. This species is one of the most important fishes in food chain of marine proteins of persian Gulf. Therefore knowing about the reproductive biology and physiology of this species is an important role on aquaculture procedures. Monthly samples of Epinephelus coioides were obtained in khozestan Bahrekan province from 2001 to 2002 for annual variation of base line of reproductive hormone. The hormones such as: 17-B estradiol, Testosteron, Progesterone, Gonadotropin I ,II GTHI, II) and cortisol have assayed and also different stages of gonads from the histological point of view were studied by light and electron microscope. Aditional to morphometric and fecundity measurements, the important factors such as : Gonadosomatic index (GSI) Hepatosomotic index (HSI) and Condition factor (KF) were also studied. Environmental factors such as temperature, salinity, photoperiod and pH were analyzed for the determination of effective factors responsible for the changes of reproductive cycles. The flactmation of estroid hormones and gonadotropines show a significant variation in different stages of maturation, e.g 17-B estradiol's concentration in the third stages, GTH II in fourth stages of sexual maturation or final oocyte maturation, plasma Testosteron in post ovulation and Progesterone during maturation indicates the highest levels of above mentioned hormones. The total calcium concentration was high in all year. calcium concentration was correlated with GTH II synthesis and increases with GTH II in June. 17-B estradiol concentration was also correlated with GSI. The high concentration of cortisol throughout the year was an index of stress and development of ovary maturational processes. This species was protogynous synchronous hermaphrodites , and belongs to annual spawning species, being monandric. The sexual transition was found to occure in individuals of 51.2- 105 cm in length. GSI and HSI level confirms the time of spawning period is in April- June. Electrone microscopic studies of gonad tissues showed some changes in mitochondria and endoplasmic reticulum in the post ovulation, maturation and post spawning periods. During the monthly sampling the biochemistry of tissues variations indicated decrease in protein and lipid content, but an increase in water content of spawning fishes which was correlated to the maturation of Epinephelus coioides . sex ratio indicative of higher frequences of females to males during monthly sampling periods. The females were smaller than males in sizes, therefore the females lived in 8-15m depth, but males were living in upper limits of depth. The results indicated that the temperature was the most effective parameter in reproductive cycle of Epinephelus coioides and the mean 24°c was a convenient temperature for spawning. Photoperiod was the second effective. factor on the reproductive cycle for this species. It seemed that the increase in the photoperiod between January to May caused a development of the oocyte. Regarding to the results of this research, it seems that the period of spawning in Epinephelus coioides is in May- June and the aquaculture procedure of Epinephelus coioides could be performed in the above mentioned periods.

Adhesive strength of new thermal barrier coatings of rare earth zirconates

La2Zr2O7 (LZ) and La-2(Zr0.7Ce0.3)(2)O-7 (LZ7C3) as novel candidate materials for thermal barrier coatings (TBCs) were prepared by electron beam-physical vapor deposition (EB-PVD). The adhesive strength of the as-deposited LZ and LZ7C3 coatings were evaluated by transverse scratch test. Meanwhile, the factors affecting the critical load value were also investigated. The critical load value of LZ7C3 coating is larger than that of LZ coating, whereas both values of these two coatings are lower than that of the traditional coating material, i.e. 8 wt% yttria stabilized zirconia (8YSZ). The micro-cracks formed in the scratch channel can partially release the stress in the coating and then enhance the adhesive strength of the coating. The width of the scratch channel and the surface spallation after transverse scratch test are effective factors to evaluate the adhesive strength of LZ and LZ7C3 coatings.

Separation of Ce(IV) and RE(III) with hollow fiber membrane-based extraction

Separation of Ce(IV) and RE(III) was investigated by hollow fiber membrane-based extraction with contercurrent recirculating operation. The mass transfer coefficients of Ce(IV) and RE(III) and the effective factors to them were tested. The results show the mass transfer coefficient of Ce(IV) is larger than that of RE(III), and their mass transfer mechanism is different. The mass transfer of Ce(IV) was controlled by the resistance in water critical layer due to its more rapid interfacial reaction rate and larger distribution coefficient, which was different from RE(III) mass transfer with a slow interfacial reaction rate and small distribution coefficient. Ce(IV) was separated from the mixed solution of Ce(IV) and RE(III) by means of the difference of their mass transfer rates.

Modeling the Potential Geographic Distribution of Black Pepper (Piper nigrum) in Asia Using GIS Tools

Known as the "king of spices", black pepper (Piper nigrum), a perennial crop of the tropics, is economically the most important and the most widely used spice crop in the world. To understand its suitable bioclimatic distribution, maximum entropy based on ecological niche modeling was used to model the bioclimatic niches of the species in its Asian range. Based on known occurrences, bioclimatic areas with higher probabilities are mainly located in the eastern and western coasts of the Indian Peninsula, the east of Sumatra Island, some areas in the Malay Archipelago, and the southeast coastal areas of China. Some undocumented places were also predicted as suitable areas. According to the jackknife procedure, the minimum temperature of the coldest month, the mean monthly temperature range, and the precipitation of the wettest month were identified as highly effective factors in the distribution of black pepper and could possibly account for the crop's distribution pattern. Such climatic requirements inhibited this species from dispersing and gaining a larger geographical range.

Dielectric and electro-optical properties of some cyanobiphenyl liquid-crystals

A variety of methods have been reviewed for obtaining parallel or perpendicular alignment in liquid-crystal cells. Some of these methods have been selected and developed and were used in polarised spectroscopy, dielectric and electro-optic studies. Also, novel dielectric and electro-optic cells were constructed for use over a range of temperature. Dielectric response of thin layers of E7 and E8 (eutectic mixture liquid-crystals) have been measured in the frequency range (12 Hz-100 kHz) and over a range of temperature (183-337K). Dielectric spectra were also obtained for supercooled E7 and E8 in the Hz and kHz range. When the measuring electric field was parallel to the nematic director, one loss peak (low-frequency relaxation process) was observed for E7 and for E8, that exhibits a Debye-type behaviour in the supercooled systems. When the measuring electric field was perpendicular to the nematic director, two resolved dielectric processes have been observed. The phase transitions, effective molecular polarisabilities, anisotropy of polarisabilities and order parameters of three liquid crystal homologs (5CB, 6CB, and 7CB), 60CB and three eutectic nematic mixtures E7, E8, and E607 were calculated using optical and density data measured at several temperatures. The order parameters calculated using the different methods of Vuks, Neugebauer, Saupe-Maier, and Palffy-Muhoray are nearly the same for the liquid crystals considered in the present study. Also, the interrelationship between density and refractive index and the molecular structure of these liquid crystals were established. Accurate dielectric and dipole results of a range of liquid-crystal forming molecules at several temperatures have reported. The role of the cyano-end group, biphenyl core, and flexible tail in molecular association, were investigated using the dielectric method for some molecules which have a structural relationship to the nematogens. Analysis of the dielectric data for solution of the liquid-crystals indicated a high molecular association, comparable to that observed in the nematic or isotropic phases. Electro-optic Kerr effect were investigated for some alkyl cyanobiphenyls, their nematic mixtures and the eutectic mixture liquid-crystals E7 and E8 in the isotropic phase and solution. The Kerr constant of these liquid crystals found to be very high at the nematic-isotropic transition temperatures as the molecules are expected to be highly ordered close to phase transition temperatures. Dynamic Kerr effect behaviour and transient molecular reorientation were also observed in thin layers of some alkyl cyanobiphenyls. Dichroic ratio R and order parameters of solutions containing some azo and anthraquinone dyes in the nematic solvent (E7 and E8), were investigated by the measurement of the intensity of the absorption bands in the visible region of parallel aligned samples. The effective factors on the dichroic ratio of the dyes dissolved in the nematic solvents were determined and discussed.

Evaluation and comparison of durability of polycyclic aromatic hydrocarbon compounds (PAHs) and its relation to the lipid content in smoked fishes, Silver carp (Hypophthalmichthys molitrix), Rutilus frisii kutum and Herring (Alosa caspia)

Cold smoking method is one of the commonest ways for fish smoking. It is done by the smoke that is the result of burning hard and soft woods is smoking rooms. Smoke includes a number of chemical constructs and its main part is poly aromatic hydrocarbons. More than one hundred kinds of these constructs are recognized in smoke that is produced from saturated hydrocarbons resulted from the solution of the woods Ligno cellulose in high temperature and lack of oxygen conditions. The high poisoning potentials and carcinogenic features sixteen constructs among them are proved and observed on humans. In this research, the PAH compounds were identified and observed in a three month period after smoking and during storing among three types of smoked fishes Silver carp and Caspian sea Sefid and herring. They are the most produced and consumed smoked fish in Iran. To find the relationship between the concentrations of PAH constructs and the amount of lipid in fish, first, the amount of lipid were determined separately in the skin and flesh of 30 samples of each type. The method used was Bligh and Dyer (1959). PAH compounds derivation were made for all skin and flesh samples smoked fish using organic solvents with Soxeleh and the derived samples were injected to gas chromatography (GC) by Hamilton injectors for determining their components quality and their quantity. The height of the used column was 25 meters and its diameter was 0.32 mm with the silica filler, nitrogen gas as carrier and flame ionization detector (FID) that are special for these constructs. For data analysis, Statistical tests were used by computer soft ware identified that the difference in the amount of lipid within the flesh and skin of each species and also among each other is significant. The largest amount was in Herrings flesh and skin, 18.74% in skin and 14.47% in flesh. The least amount in the skin 4.19% and the flesh 3.10% of Sefid. The amount in Silver carp was 13.28%in skin and 8.16% in flesh. The examination of the PAH compounds in smoked fish showed that is carcinogenic compounds; exist in these in these fish with different quantities in each. It seems that its amount is directly related to the amount of their lipid. The amount is different in flesh and skin. One of the most important reasons is the direct content of smoke and the concentration of lipid in tissues of all three types. The maintenance of the smoked fish for three months showed that most of PAH compounds were solved and their density decreased. The changes in density within time in different in each type and in flesh and skin. The amount of their receiving in human through the consumption of the smoked fish depends on the resulted density, the way and the amount of consumption and now we can determine and execute standards for the maximum dosage per day and per month regarding effective factors.

A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup

Additive Manufacturing (AM) includes a range of approaches that correlate with computer aided design (CAD) and manufacturing by fabrication via precise layers and is a promising method for the production of medical tools. In this study, different aspects and mechanisms of solidification for curved surfaces based on equilibrium at curved interfaces, Monge patch, interfacial and Gibbs energy will be discussed. Also, the effect of capillarity, geometry, substrate temperature, cooling rate and scanning parameters in the solidification of a prosthetic acetabular cup (PAC) using selective laser melting (SLM) is analysed. The contributions of this work are analysing solidification and effective factors in this process to produce parts with a higher quality and mechanical properties such as strength, strain, porosity, relative density and hardness. Results indicate that due to the surface to volume (S/V) ratio, and the increasing effect of the radius on Monge patch, thermal stresses and surface forces are more prevalent on outer surfaces. Moreover, solidification and mechanical properties are related to capillarity, geometry, substrate temperature, cooling rate, scanning power and speed. The results also indicate the interaction of solute diffusion and heat transfer with interatomic forces in large S/V ratio and at small scales tend to improve solidification.

An examination of factors influencing effective and continuous improvement of Indonesian contractors' quality management systems

This paper presents the results of a pilot study examining the factors that impact most on the effective implementation of, and improvement to, Quality Mangement Sytems (QMSs) amongst Indonesian construction companies. Nine critical factors were identified from an extensive literature review, and a survey was conducted of 23 respondents from three specific groups (Quality Managers, Project Managers, and Site Engineers) undertaking work in the Indonesian infrastructure construction sector. The data has been analyzed initially using simple descriptive techniques. This study reveals that different groups within the sector have different opinions of the factors regardless of the degree of importance of each factor. However, the evaluation of construction project success and the incentive schemes for high performance staff, are the two factors that were considered very important by most of the respondents in all three groups. In terms of their assessment of tools for measuring contractor’s performance, additional QMS guidelines, techniques related to QMS practice provided by the Government, and benchmarking, a clear majority in each group regarded their usefulness as ‘of some importance’.