Developing of Supportive Context for Eco-Industrial Networks in Finland

The aim of the present thesis was to explore possible promotional actions to support the emergence of eco-industrial business networks in Finland. The main objectives were to investigate what kind of factors affect in the development of eco-industrial networks and further make suggestions in what kinds of actions this could be supported. In addition, since the active facilitation was discovered as one potential promoting activity, further investigation about facilitation process in Finnish context was conducted and also main characteristics of nationwide facilitation programme were identified. This thesis contains literature review of network orchestration and eco-industrial networks. The latter consists of green supply chain management and industrial symbiosis, although the main focus of the study leans on the concept of industrial symbiosis. The empirical data of the study was obtained from semi-structured expert interviews. These interviews were analyzed using qualitative content analysis. The study identified four main promotional activities for eco-industrial networks: 1) building awareness, 2) incentives, 3) dismantling of legislative barriers and 4) active facilitation. In addition, a framework for facilitation activities in Finnish context was built and main characteristics of nationwide facilitation programme were identified.

An adaptive IoT management infrastructure for eco transport networks

The complexity associated with fast growing of B2B and the lack of a (complete) suite of open standards makes difficulty to maintain the underlying collaborative processes. Aligned to this challenge, this paper aims to be a contribution to an open architecture of logistics and transport processes management system. A model of an open integrated system is being defined as an open computational responsibility from the embedded systems (on-board) as well as a reference implementation (prototype) of a host system to validate the proposed open interfaces. Embedded subsystem can, natively, be prepared to cooperate with other on-board units and with IT-systems in an infrastructure commonly referred to as a center information system or back-office. In interaction with a central system the proposal is to adopt an open framework for cooperation where the embedded unit or the unit placed somewhere (land/sea) interacts in response to a set of implemented capabilities.

Industrial networks: are they a new and alternative way to conduct business or just a logical consequence of a globalising economy?

Based on a report for the seminar Industrial Networks, at Goethe Universität Frankfurt am Main Dozent: Prof. Dr. Blättel-Mink, Prof. Dr. António Moniz SS 2011

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

Industrial Networks between China and the Countries of the Asia-Pacific Region

This paper investigates the changes in the structures of industrial networks that have occurred in the Asia-Pacific region in line with the rapid growth of the Chinese economy. Analyses using international input-output tables revealed that during the 1990s, there was a significant increase in the dependence of Asian countries’ manufacturing industries, such as textiles and electronics, on China’s industries, though industries in Japan and the United States remain important as the main suppliers of industries in Asian countries.

Coordination mechanisms and software in industrial networks - a literature review

This paper groups recent supply chain management research focused on organizational design and its software support. The classification encompasses criteria related to research methodology and content. Empirical studies from management science focus on network types and organizational fit. Novel planning algorithms and innovative coordination schemes are developed mostly in the field of operations research in order to propose new software features. Operations and production management realize cost-benefit analysis of IT software implementations. The success of software solutions for network coordination depends strongly on the fit of three dimensions: network configuration, coordination scheme and software functionality. This paper concludes with proposals for future research on unaddressed issues within and among the identified research streams.

Industrial networks of the future:review of research and practice

Academic researchers have followed closely the interest of companies in establishing industrial networks by studying aspects such as social interaction and contractual relationships. But what patterns underlie the emergence of industrial networks and what support should research provide for practitioners? Firstly, it appears that manufacturing is becoming a commodity rather than a unique capability, which accounts especially for low-technology approaches in downstream parts of the network, for example in assembly operations. Secondly, the increased tendency towards specialization has forced other, upstream, parts of industrial networks to introduce advanced manufacturing technologies to supply niche markets. Thirdly, the capital market for investments in capacity, and the trade in manufacturing as a commodity, dominates resource allocation to a larger extent than previously was the case. Fourthly, there is a continuous move towards more loosely connected entities that comprise manufacturing networks. More traditional concepts, such as the “keiretsu” and “chaibol” networks of some Asian economies, do not sufficiently support the demands now being placed on networks. Research should address these four fundamental challenges to prepare for the industrial networks of 2020 and beyond.

A review of research and practice for the industrial networks of the future

Academic researchers have followed closely the interest of companies in establishing industrial networks by studying aspects such as social interaction and contractual relationships. But what patterns underlie the emergence of industrial networks and what support should research provide for practitioners? First, it appears that manufacturing is becoming a commodity rather than a unique capability, which accounts especially for low-technology approaches in downstream parts of the network, for example, in assembly operations. Second, the increased tendency towards specialisation has forced other, upstream, parts of industrial networks to introduce advanced manufacturing technologies for niche markets. Third, the capital market for investments in capacity, and the trade in manufacturing as a commodity, dominates resource allocation to a larger extent than was previously the case. Fourth, there is becoming a continuous move towards more loosely connected entities that comprise manufacturing networks. Finally, in these networks, concepts for supply chain management should address collaboration and information technology that supports decentralised decision-making, in particular to address sustainable and green supply chains. More traditional concepts, such as the keiretsu and chaibol networks of some Asian economies, do not sufficiently support the demands now being placed on networks. Research should address these five fundamental challenges to prepare for the industrial networks of 2020 and beyond. © 2010 Springer-Verlag London.

Industrial networks of the future:a critical commentary on research and practice

Academia has followed the interest by companies in establishing industrial networks by studying aspects such as social interaction and contractual relationships. But what patterns underlie the emergence of industrial networks and what support should research provide for practitioners? Firstly, it seems that manufacturing is becoming a commodity rather than a unique capability, which accounts especially for low-technology approaches in downstream parts of the network, for example in assembly operations. Secondly, the increased tendency to specialize forces other parts of industrial networks to introduce advanced manufacturing technologies for niche markets. Thirdly, the capital market for investments in capacity and the trade in manufacturing as a commodity dominates resource allocation to a larger extent. Fourthly, there will be a continuous move toward more loosely connected entities forming manufacturing networks. More traditional concepts, like keiretsu and chaibol networks, do not sufficiently support this transition. Research should address these fundamental challenges to prepare for the industrial networks of 2020 and beyond.

Ekoteolliset verkostot

Tämän kandidaatintyön tarkoituksena on tarkastella ekoteollisten verkostojen ja materialisaation vähentämisen käsitteet sekä ekoteollisten verkostojen rooli materialisaation vähentämisessä. Työ rakentuu viidestä osasta, joista ensimmäisessä kuvaillaan verkostoja yleisesti. Toisessa osassa esitellään systemaattinen kirjallisuuskatsaus. Kolmannessa osassa käsitellään ekoteolliset verkostot eri muodoissaan, ja neljännessä materialisaation vähentäminen. Viidennessä osassa esitellään ekoteollisten verkostojen rooli materialisaation vähentämisessä. Työssä käytetyn aineiston perusteella tehtiin johtopäätös, että ekoteollisilla verkostoilla on merkittävä rooli materialisaation vähentämisessä, mutta haasteiden voittaminen vaatii suuria ponnisteluja. Lisäksi tulevaisuudessa yritysten olisi pystyttävä hyödyntämään materialisaation vähentämistä entistä tehokkaammin.

Ekoteollinen toiminta ja verkostot - Case St1

Tämä kandidaatintyö käsittelee kestävään kehitykseen tähtäävän teollisen ekologian ajatusmallin alle muodostuneita käsitteitä teollisesta symbioosista, ekoteollisesta puistosta ja ekoteollisesta verkostosta. Työn tavoitteena on selventää näiden käsitteiden merkitystä ja toimintaa käytännössä. Lisäksi teoriakatsauksen pohjalta pyritään luomaan käsitteellinen viitekehys, jonka avulla pystytään tarkastelemaan esimerkkiyrityksen toimintaa. Teollisen ekologian taustalla vaikuttavat selkeä huoli kestävän kehityksen turvaamisesta ja maapallon luonnonvarojen riittävyydestä. Tähän pyrkivät vaikuttamaan muun muassa poliittiset päättäjät, kannustamalla entistä ekologisempaan yritystoimintaan. Teollinen symbioosi nähdään yritysten tapana toimia ekologisuutta edistäen. Tähän toimintaan yhdistyvät helposti ekoteolliset puistot sekä verkostot, jotka tähtäävät kaikki samaan tavoitteeseen. Näiden käsitteiden avulla yrityksen toimintaa voidaan tarkastella eri tasoilla. Tässä työssä tarkastellaan käsitteellisen viitekehyksen avulla esimerkkiyritys St1 Biofuels Oy:tä, jonka toiminta vastaa monilta piirteiltään työssä esiteltyjen käsitteiden malleja. Teollinen symbioosi ja ekoteolliset verkostot nähdään malleina, joilla yrityksen on mahdollista tavoitella selkeää kilpailuetua sekä kustannussäästöjä toiminnassaan. Tärkeimpiä tekijöitä toiminnassa ovat materiaalivirtojen optimointi, jätteen määrän vähentäminen sekä sopivien verkostokumppaneiden löytäminen toiminnan varmistamiseksi.

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena Väitöskirjatutkimus tarkastelee kierrätystä ja uudelleenvalmistusta sekä siihen perustuvaa kierrätysliiketoimintaa taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena. Tässä kestävyys tarkoittaa jätekysymysten ratkaisemista tavalla, joka mahdollistaa kestävän kehityksen periaatteiden mukaisen yhteiskunnan kehittymisen. Jätteisiin liittyvät taloudelliset ja ekolo- giset kysymykset ovat merkittävä yhteiskunnallinen haaste. Tämä luo tarpeen tutkimukselle, jonka lähtökohtana on jätekysymysten moniulotteinen tarkas- telu ja yksittäisen yrityksen toiminnan suhteuttaminen osaksi laajempaa kokonaisuutta. Tässä tutkimuksessa jätteen hyödyntämistä materiaalina lähestytään sekä empiirisesti yrityksen näkökulmasta että teoreettisesti systeemiajattelun tarjoamasta laajemmasta perspektiivistä. Tutkimuksen tavoitteena on ymmär- tää kierrätystä ja uudelleenvalmistusta liiketoimintamahdollisuutena, niiden merkitystä yrityksessä, alueella ja kierrätystaloudessa sekä näiden vuorovai- kutteista suhdetta taloudelliseen ja ekologiseen kestävyyteen nähden. Tutki- muskysymys on tärkeä, koska siihen vastaamalla syvennetään ymmärrystä yrityksissä tapahtuvan kierrätyksen ja uudelleenvalmistuksen merkityksestä kestävämmän yhteiskunnan rakentumisessa. Tutkimuksen teoriaperusta pohjautuu teollisen ekologian kirjallisuuteen ja ekoteollisen kehityksen tutkimukseen. Kierrätysliiketoiminnan kestävyyden tarkastelu rakentuu tutkimuksessa teollisen ekologian ja ekoteollisen kehityk- sen lähtökohtana olevaan win-win-ajatteluun, jonka mukaan hyvä ympäristö- suorituskyky ja hyvä taloudellinen suorituskyky voivat vahvistaa toisiaan. Kierrätysliiketoiminnan teoreettisessa tarkastelussa keskeisiä elementtejä ovat kierrätystalouden malli, teollisen ekologian alueelliset systeemit, ekoteolliset verkostot ja yrityksen rooli teollista ekologiaa soveltavana toimijana. Tutki- muksen keskeisenä kontribuutiona on yritysnäkökulman integroiminen aiem- paa vahvemmin osaksi teollisen ekologian diskursseja. Kierrätysliiketoiminnan taloudelliseen ja ekologiseen kannattavuuteen ja sen myötä kestävyyteen liittyviä kysymyksiä on lähestytty tekemällä yritys- haastatteluja ja hyödyntämällä valmista haastatteluaineistoa. Tutkimusta varten haastattelin 10 kierrätysliiketoimintaa harjoittavaa yritystä vuosina 2007 ja 2008. Tämän lisäksi tutkimuksessa on hyödynnetty Turun ammatti- korkeakoulun ja Turku Science Parkin toteuttamassa RESU-hankkeessa (Kierrätysliiketoiminta ja resurssitehokkuus Varsinais-Suomen vahvuudeksi – RESU) vuosina 2013 ja 2014 kerättyä aineistoa. Hankkeessa haastateltiin yhteensä 25 jätemateriaalia hyödyntävää ja/tai tuottavaa yritystä. Aineistojen analysointimenetelmänä on sisällönanalyysi. Analyysin tulok- sena muodostettiin yhteensä viisi pääteemaa ja 12 alateemaa. Teemat kuvaavat kierrätysliiketoimintaa aiempaa moniulotteisemmin ja näin syventävät ymmär- rystä ilmiön merkityksestä kestävämmän yhteiskunnan rakentumisessa. Teolli- sen ekologian alaan kuuluvat kvalitatiiviset tutkimukset ovat melko harvinai- sia, joten tämän väitöstutkimuksen ilmeisenä vahvuutena on laadullisen tutkimusmenetelmän hyödyntäminen. Tutkimuksen tuloksena voidaan todeta, että kierrätystalouden kehittymistä edistävä kierrätysliiketoiminta on monimuotoista ja sisältää erilaisia liiketoi- mintamahdollisuuksia sekä arvoketjuja. Paikallistuntemus ja keskeinen sijainti jätemateriaalien tuottajien suhteen on tärkeä kriteeri kierrätysliiketoiminnassa, mutta jätemateriaaleja myös kuljetetaan pitkiä matkoja. Paikallisia tai alueelli- sia jätevirtoja hyödyntävä kierrätysliiketoiminta voi tukea alueellista kestä- vyyttä, mutta toisinaan myös keskitetty hyödyntäminen voi olla kestävä vaih- toehto. Yhteistyöverkostot ovat tärkeitä jätemateriaalin laadun ja saatavuuden näkökulmasta. Tutkimus osoittaa, että kierrätysliiketoimintaa harjoittavat yritykset ovat samalla sekä kierrätystalouden käytännön toimeenpanijoita että uuden toimintakulttuurin luojia. Tutkimuksen tulosten perusteella voidaan esittää johtopäätös, että kierrä- tysliiketoiminta on taloudellisesti ja ekologisesti kannattava liiketoimintamah- dollisuus. Win-win-ratkaisut eivät kuitenkaan takaa kierrätysliiketoiminnan kestävyyttä. Kierrätysliiketoiminnan kestävyyden arvioiminen edellyttää laajaa perspektiiviä ja toiminnan vaikutusten suhteuttamista mittakaavaan, ajalliseen ulottuvuuteen, interventioon ja sosiaalisiin kysymyksiin. Teolliseen ekologiaan perustuva kierrätysliiketoiminta luo mahdollisuuksia edistää kestävyyttä, joten tällä perusteella kierrätystä ja uudelleenvalmistusta voidaan pitää kestävänä liiketoimintamahdollisuutena. Avainsanat: kierrätysliiketoiminta, kierrätys, uudelleenvalmistus, systeemiajattelu, teollinen ekologia, ekoteollinen kehitys, kierrätystalous, win-win-ajattelu, kestävyys One company's waste is another's raw material –Recycling and remanufacturing as an economically and environmentally sustainable business opportunity The thesis investigates whether product recycling and remanufacturing can serve as a business opportunity that is economically and ecologically sustaina- ble. In this effort, my idea is to contribute to solving the waste issue in a manner that makes it possible to strive toward sustainable societal develop- ment. The economic and ecological questions associated with waste flows are a significant challenge. The complexity of the issue requires a multidimen- sional approach in which the operation of an individual company is viewed in the context of the larger societal system. In this thesis waste utilization as a resource with value is considered both from an empirical perspective on the firm as well as from a more general viewpoint offered by systems analysis. The objective of the thesis is to under- stand recycling and remanufacturing as a business opportunity. The thesis considers the meaning of recycling and remanufacturing for a single company, for the region the company is located and for the recycling economy. The objective of this study is important for it enhances the understanding of the product recycling and remanufacturing processes that take place within busi- ness organizations and how these processes affect societal sustainable development. The theoretical basis arises from industrial ecology and from the literature on eco-industrial development. The business-economic win-win situation and this vision serve as the basic position from which recycling business is inves- tigated in the thesis. In the theoretical discussion, key elements are recycling economy model, regional and local industrial ecosystems, eco-industrial networks and the role of a company as an actor that applies industrial ecology in practice. The main contribution of this study lies in integrating the company perspective more strongly into the industrial ecology discourses. The recycling business has been studied by conducting interviews in companies and by secondary analysis of an existing interview material. During 2007 and 2008 I made 10 interviews in companies that are active in recycling business. In addition, I used interview material gathered for the project “Recycling business and resource efficiency as the strength of Southwest Finland” (RESU) by Turku University of Applied Sciences and Turku Science Park during the period 2013–2014. This data covers altogether 25 businesses that either utilize and/or produce waste materials. The data has been analyzed using the content analysis method. This process led to the development of 5 main themes and 12 sub-themes. These themes describe the recycling business multi-dimensionally and thus understanding of the phenomenon and its role in building a sustainable society are substantially deepened in this research. In the field of industrial ecology qualitative studies are relatively rare and therefore the qualitative research approach is an evident strength of the thesis. The results show that the recycling business activity supporting recycling economy has diverse dimensions including various business opportunities and diverse value chains. The results show that for waste producers it is important to know the local situational factors and to have a central geographical location. Waste materials are, however, transported over long distances as well. The study indicates that local waste flow utilization can support regional sustainability, while occasionally a more centralized utilization can be sustain- able. Collaboration networks are important to secure the quality and availabil- ity of utilizable waste materials. The thesis demonstrates that the companies practicing recycling business serve simultaneously as actors that implement recycling economy and enhance a new operation culture within the business community. The overall conclusion of the thesis argues that recycling business is a business opportunity that can support both an economically and environmen- tally viable business operation. However, win-win solutions do not secure the sustainability of recycling business. The sustainability evaluation of recycling business requires a holistic systems perspective. The actions undertaken need to be considered with changing spatial and temporal system boundaries, societal intervention and placed in the context of relevant societal issues. Industrial ecology -based recycling business creates opportunities for sustain- ability and thus recycling and remanufacturing present an opportunity for sustainable business. Keywords: Recycling business; Recycling; Remanufacturing, Systems thinking; Industrial ecology; Eco-industrial development; Recycling Economy; Win-Win thinking; Sustainability

Remote control of CNC machines using the CyberOPC communication system over public networks

During the last few years, the evolution of fieldbus and computers networks allowed the integration of different communication systems involving both production single cells and production cells, as well as other systems for business intelligence, supervision and control. Several well-adopted communication technologies exist today for public and non-public networks. Since most of the industrial applications are time-critical, the requirements of communication systems for remote control differ from common applications for computer networks accessing the Internet, such as Web, e-mail and file transfer. The solution proposed and outlined in this work is called CyberOPC. It includes the study and the implementation of a new open communication system for remote control of industrial CNC machines, making the transmission delay for time-critical control data shorter than other OPC-based solutions, and fulfilling cyber security requirements.

User-interface technologies for the industrial environment: towards the cyber-factory

In the past few years the so-called gadgets like cellular phones, personal data assistants and digital cameras are more widespread even with less technological aware users. However, for several reasons, the factory-floor itself seems to be hermetic to this changes ... After the fieldbus revolution, the factory-floor has seen an increased use of more and more powerful programmable logic controllers and user interfaces but the way they are used remains almost the same. We believe that new user-computer interaction techniques including multimedia and augmented rcaliry combined with now affordable technologies like wearable computers and wireless networks can change the way the factory personal works together with the roachines and the information system on the factory-floor. This new age is already starting with innovative uses of communication networks on the factory-floor either using "standard" networks or enhancing industrial networks with multimedia and wireless capabilities.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.