Quantitative and Qualitative Trade-Off Analysis of Drowsy Driver Detection Methods: Single Electrode Wearable EEG Device, Multi-Electrode Wearable EEG Device, and Head-Mounted Gyroscope

Drowsy driving impairs motorists’ ability to operate vehicles safely, endangering both the drivers and other people on the road. The purpose of the project is to find the most effective wearable device to detect drowsiness. Existing research has demonstrated several options for drowsiness detection, such as electroencephalogram (EEG) brain wave measurement, eye tracking, head motions, and lane deviations. However, there are no detailed trade-off analyses for the cost, accuracy, detection time, and ergonomics of these methods. We chose to use two different EEG headsets: NeuroSky Mindwave Mobile (single-electrode) and Emotiv EPOC (14- electrode). We also tested a camera and gyroscope-accelerometer device. We can successfully determine drowsiness after five minutes of training using both single and multi-electrode EEGs. Devices were evaluated using the following criteria: time needed to achieve accurate reading, accuracy of prediction, rate of false positives vs. false negatives, and ergonomics and portability. This research will help improve detection devices, and reduce the number of future accidents due to drowsy driving.

Vehicle and driver attributes affecting distance from the steering wheel in motor vehicles

The current study was designed to confirm that female drivers sit closer to the steering wheel than do male drivers and to investigate whether this expected difference in sitting position is attributable to differences in the physical dimensions of men and women. Driver body dimensions and multiple measures of sitting distance from the steering wheel were collected from a sample of 150 men and 150 women. The results confirmed that on average, women sit closer to the steering wheel than men do and that this difference is accounted for by variations in body dimensions, especially height. This result suggests that driver height may provide a good surrogate for sitting distance from the steering wheel when investigating the role of driver position in real-world crash outcomes. The potential applications of this research include change to vehicle design that allows independent adjustment of the relative distance among the driver's seat, the steering wheel, and the floor pedals.

An agent-based approach to modelling driver route choice behaviour under the influence of real-time information

This paper presents an agent-based approach to modelling individual driver behaviour under the influence of real-time traffic information. The driver behaviour models developed in this study are based on a behavioural survey of drivers which was conducted on a congested commuting corridor in Brisbane, Australia. Commuters' responses to travel information were analysed and a number of discrete choice models were developed to determine the factors influencing drivers' behaviour and their propensity to change route and adjust travel patterns. Based on the results obtained from the behavioural survey, the agent behaviour parameters which define driver characteristics, knowledge and preferences were identified and their values determined. A case study implementing a simple agent-based route choice decision model within a microscopic traffic simulation tool is also presented. Driver-vehicle units (DVUs) were modelled as autonomous software components that can each be assigned a set of goals to achieve and a database of knowledge comprising certain beliefs, intentions and preferences concerning the driving task. Each DVU provided route choice decision-making capabilities, based on perception of its environment, that were similar to the described intentions of the driver it represented. The case study clearly demonstrated the feasibility of the approach and the potential to develop more complex driver behavioural dynamics based on the belief-desire-intention agent architecture. (C) 2002 Elsevier Science Ltd. All rights reserved.

A compact shock-assisted free-piston driver for impulse facilities

A free-piston driver that employs entropy-raising shock processes with diaphragm rupture has been constructed, which promises significant theoretical advantages over isentropic compression. Results from a range of conditions with helium and argon driver gases are reported. Significant performance gains were achieved in some test cases. Heat losses are shown to have a strong effect on driver processes. Measurements compare well with predictions from a quasi-one-dimensional numerical code.

Digital interconnectivity as a driver for port and logistics competitiveness

Creating an innovative tool that takes advantage of digital interconnectivity between shipping agencies and husbandry services suppliers was the starting point. But the main purpose of this paper is to figure out if that represents a business opportunity. It describes the preliminary stages undertaken, as the connections with the main potential providers of the husbandry services. This was carried out as a qualitative research, based on interviews given by shipping agencies that contributed as a source of data about their activities but also to survey their acceptance of the concept that could change the way of doing business in this area.At the same time, inquiries have been made to build financial scenarios that show the costs and revenue streams allocated to this project. Considering the data collected from the main players in husbandry services and the different outcomes, the feasibility of this project is assessed. Even though the paradigm was well received by all the firms contacted, the development costs turn out to be the main threat to the project so further steps are advised.

Electric vehicle assistant based in driver profile

This paper presents the outcomes of a research work consisting in the development of an Electric Vehicle Assistant (EVA), which creates and stores a driver profile where are contained the driving behaviours related with the EV energy consumption, the EV battery charging information, and the performed routes. This is an application for mobile devices that is able to passively track the driver behaviour and to access several information related with the EV in real time. It is also proposed a range prediction approach based on probability to take into account unpredictable effects of personal driving style, traffic or weather.

Visual recognition systems in a car passenger compartment with the focus on facial driver identification

Magdeburg, Univ., Fak. für Informatik, Diss., 2014

Compliment de les directrius DRIVER dels repositoris cooperatius RACO, RECERCAT i TDX

Aquest informe ha estat elaborat per encàrrec del Consorci de Biblioteques Universitàries de Catalunya (CBUC). El seu objectiu és comprovar si des del punt de vista tècnic, els repositoris cooperatius que el CBUC coordina juntament amb el Centre de Supercomputació de Catalunya (CESCA), es poden integrar dins la infrastructura DRIVER.

Evolution: sociality as a driver of unorthodox reproduction.

An unusual reproductive system was discovered in desert ants, in which daughter queens are produced asexually via parthenogenesis, whereas workers develop from hybrid crosses between genetically divergent lineages. The system appears to be doomed to extinction.

A Review of the Driver's License Issuance Program Administered by the Department of Transportation and the County Treasures, For the Fiscal Year Ended June 30, 2005

Other Audit Reports

Driver scheduling problem modelling

The Drivers Scheduling Problem (DSP) consists of selecting a set of duties for vehicle drivers, for example buses, trains, plane or boat drivers or pilots, for the transportation of passengers or goods. This is a complex problem because it involves several constraints related to labour and company rules and can also present different evaluation criteria and objectives. Being able to develop an adequate model for this problem that can represent the real problem as close as possible is an important research area.The main objective of this research work is to present new mathematical models to the DSP problem that represent all the complexity of the drivers scheduling problem, and also demonstrate that the solutions of these models can be easily implemented in real situations. This issue has been recognized by several authors and as important problem in Public Transportation. The most well-known and general formulation for the DSP is a Set Partition/Set Covering Model (SPP/SCP). However, to a large extend these models simplify some of the specific business aspects and issues of real problems. This makes it difficult to use these models as automatic planning systems because the schedules obtained must be modified manually to be implemented in real situations. Based on extensive passenger transportation experience in bus companies in Portugal, we propose new alternative models to formulate the DSP problem. These models are also based on Set Partitioning/Covering Models; however, they take into account the bus operator issues and the perspective opinions and environment of the user.We follow the steps of the Operations Research Methodology which consist of: Identify the Problem; Understand the System; Formulate a Mathematical Model; Verify the Model; Select the Best Alternative; Present the Results of theAnalysis and Implement and Evaluate. All the processes are done with close participation and involvement of the final users from different transportation companies. The planner s opinion and main criticisms are used to improve the proposed model in a continuous enrichment process. The final objective is to have a model that can be incorporated into an information system to be used as an automatic tool to produce driver schedules. Therefore, the criteria for evaluating the models is the capacity to generate real and useful schedules that can be implemented without many manual adjustments or modifications. We have considered the following as measures of the quality of the model: simplicity, solution quality and applicability. We tested the alternative models with a set of real data obtained from several different transportation companies and analyzed the optimal schedules obtained with respect to the applicability of the solution to the real situation. To do this, the schedules were analyzed by the planners to determine their quality and applicability. The main result of this work is the proposition of new mathematical models for the DSP that better represent the realities of the passenger transportation operators and lead to better schedules that can be implemented directly in real situations.

Electronic Payments for Driver's Licensing Transactions,December 31, 2008

House File 2196 required the Department of Transportation (DOT) to study the acceptance of electronic payments at its customer service sites and sites operated by county treasurers. Specifically the legislation requires the following: “The department of transportation shall review the current methods the department employs for the collection of fees and other revenues at sites operated by county treasurers under chapter 321M and at customer service sites operated by the department. In conducting its review, the department, in cooperation with the treasurer of state, shall consider providing an electronic payment option for all of its customers. The department shall report its findings and recommendations by December 31, 2008, to the senate and house standing committees on transportation regarding the advantages and disadvantages of implementing one or more electronic payment systems.” This review focused on estimating the costs of providing an electronic payment option for customers of the DOT driver’s license stations and those of the 81 county treasurers. Customers at these sites engage in three primary financial transactions for which acceptance of electronic payments was studied: paying for a driver’s license (DL), paying for a non-operator identification card (ID), and paying certain civil penalties. Both consumer credit cards and PIN-based debit cards were reviewed as electronic payment options. It was assumed that most transactions would be made using a consumer credit card. Credit card companies charge a fee for each transaction for which they are used. The amount of these fees varies among credit card companies. The estimates for credit card fees used in this study were based on the State Treasurer of Iowa’s current credit card contract, which is due to expire in September 2009. Since credit card companies adjust their fees each year, estimates were based on the 2008 fee schedule. There is also a fee for the use of PIN-based debit cards. The estimates for PIN-based debit card transactions were based on information provided by Wells Fargo Merchant Services for current fees charged by debit card networks. Credit and debit card transactions would be processed through vendor-provided hardware and software. The costs would be determined through the competitive bidding process since several vendors provide this function; therefore, these costs are not reflected in this document.