Resposta de cultivares de arroz de sequeiro ao preparo do solo e à irrigação por aspersão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparo do solo, irrigação por aspersão e rendimento de engenho do arroz de terras altas

O rendimento de engenho obtido após o beneficiamento industrial é um parâmetro importante durante a fase de comercialização do arroz e pode ser influenciado pelas práticas culturais realizadas durante o período de cultivo. O presente trabalho teve como objetivo avaliar o rendimento de benefício, rendimento de inteiros e grãos quebrados de cultivares de arroz de sequeiro em função do preparo do solo e da irrigação por aspersão na região de Selvíria - MS, durante os anos agrícolas de 1997/98 e 1998/99. O solo do local é do tipo Latossolo Vermelho álico, textura argilosa e os tratamentos consistiram na combinação de três cultivares de arroz (IAC 201, Carajás e Guarani), com três sistemas de preparo do solo (arado de aiveca + grade niveladora, escarificador + grade niveladora e grade pesada + grade niveladora) e três níveis de irrigação por aspersão (sequeiro e duas lâminas de água), com quatro repetições. O cultivar IAC 201 apresenta maior rendimento de benefício e o Carajás destaca-se dos demais em rendimento de inteiros; os diferentes sistemas de preparo utilizados praticamente não interferem no rendimento de engenho; a irrigação por aspersão aumenta o rendimento de benefício e o rendimento de inteiros, principalmente em ano com ocorrência de veranico.

Short and long-term effects of tillage systems and nutrient sources on soil physical properties of a Southern Brazilian Hapludox

Soil tillage promotes changes in soil structure. The magnitude of the changes varies with the nature of the soil, tillage system and soil water content and decreases over time after tillage. The objective of this study was to evaluate short-term (one year period) and long-term (nine year period) effects of soil tillage and nutrient sources on some physical properties of a very clayey Hapludox. Five tillage systems were evaluated: no-till (NT), chisel plow + one secondary disking (CP), primary + two (secondary) diskings (CT), CT with burning of crop residues (CTb), and CT with removal of crop residues from the field (CTr), in combination with five nutrient sources: control without nutrient application (C); mineral fertilizers, according to technical recommendations for each crop (MF); 5 Mg ha-1 yr-1 of poultry litter (wetmatter) (PL); 60 m³ ha-1 yr-1 of cattle slurry (CS) and; 40 m³ ha-1 yr-1 of swine slurry (SS). Bulk density (BD), total porosity (TP), and parameters related to the water retention curve (macroporosity, mesoporosity and microporosity) were determined after nine years and at five sampling dates during the tenth year of the experiment. Soil physical properties were tillage and time-dependent. Tilled treatments increased total porosity and macroporosity, and reduced bulk density in the surface layer (0.00-0.05 m), but this effect decreased over time after tillage operations due to natural soil reconsolidation, since no external stress was applied in this period. Changes in pore size distribution were more pronounced in larger and medium pore diameter classes. The bulk density was greatest in intermediate layers in all tillage treatments (0.05-0.10 and 0.12-0.17 m) and decreased down to the deepest layer (0.27-0.32 m), indicating a more compacted layer around 0.05-0.20 m. Nutrient sources did not significantly affect soil physical and hydraulic properties studied.

Aggregate stability as affected by short and long-term tillage systems and nutrient sources of a hapludox in southern Brazil

The ability of a soil to keep its structure under the erosive action of water is usually high in natural conditions and decreases under frequent and intensive cultivation. The effect of five tillage systems (NT = no-till; CP = chisel plowing and one secondary disking; CT = primary and two secondary distings; CTb = CT with crop residue burning; and CTr = CT with removal of crop residues from the field), combined with five nutrient sources (C = control, no nutrient application; MF = mineral fertilizers according to technical recommendations for each crop; PL = 5 Mg ha-1 y-1 fresh matter of poultry litter; CM = 60 m³ ha-1 y-1 slurry cattle manure; and SM = 40 m³ ha-1 y-1 slurry swine manure) on wet-aggregate stability was determined after nine years (four sampled soil layers) and on five sampling dates in the 10th year (two sampled soil layers) of the experiment. The size distribution of the air-dried aggregates was strongly affected by soil bulk density, and greater values of geometric mean diameter (GMD AD) found in some soil tillage or layer may be partly due to the higher compaction degree. After nine years, the GMD AD on the surface was greater in NT and CP compared to conventional tillage systems (CT, CTb and CTr), due to the higher organic matter content, as well as less soil mobilization. Aggregate stability in water, on the other hand, was affected by the low variation in previous gravimetric moisture of aggregates, which contributed to a high coefficient of variation of this attribute. The geometric mean diameter of water-stable aggregates (GMD WS) was highest in the 0.00-0.05 m layer in the NT system, in the layers 0.05-0.10 and 0.12-0.17 m in the CT, and values were intermediate in CP. The stability index (SI) in the surface layers was greater in treatments where crop residues were kept in the field (NT, CP and CT), which is associated with soil organic matter content. No differences were found in the layer 0.27-0.32 m. The effect of nutrient sources on GMD AD and GMD WS was small and did not affect SI.

Tillage systems and nutrient sources affecting soil cover, temperature and moisture in a clayey oxisol under corn

Tillage affects soil physical properties, e.g., porosity, and leads to different amounts of mulch on the soil surface. Consequently, tillage is related to the soil temperature and moisture regime. Soil cover, temperature and moisture were measured under corn (Zea mays) in the tenth year of five tillage systems (NT = no-tillage; CP = chisel plow and single secondary disking; CT = primary and double secondary disking; CTb = CT with crop residues burned; and CTr = CT with crop residues removed). The tillage systems were combined with five nutrient sources (C = control; MF = mineral fertilizer; PL = poultry litter; CS = cattle slurry; and SS = swine slurry). Soil cover after sowing was greatest in NT (88 %), medium in CP (38 %) and lowest in CT treatments (< 10 %), but differences decreased after corn emergence. Soil temperature was related with soil cover, and significant differences among tillage were observed at the beginning of the growing season and at corn maturity. Differences in soil temperature and moisture in the surface layer of the tilled treatments were greater during the corn cycle than in untilled treatments, due to differences in intensity of soil mobilization and mulch remaining after soil management. Nutrient sources affected soil temperature and moisture in the most intense part of the corn growth period, and were related to the variation of the corn leaf area index among treatments

Caracterização física do solo e desempenho operacional de máquinas agrícolas na implantação da cultura do sorgo forrageiro

Forage sorghum can be grown in areas presenting dry and hot environmental situations where the yield of other grasses can often be uneconomical. The objective of this study was to analyze the operating performance of agricultural machines in the deployment of sorghum forage in four tillage systems, as follows: no-tillage system, disk harrow + seeding, disk harrow + two light disking + seeding, minimum tillage + seeding and four seeding different speeds, as follows: 3, 5, 6 and 9 km h(-1). The study was performed under field conditions in FCA/UNESP, Botucatu County, SP, Brazil. The data were subjected to variance analysis in a simple factorial 4 x 4, and a random block design with split plots. Operational performance of the agricultural machinery, physical characteristics the soil, its water content and the yield of dry matter and green sorghum were determined. The operational performance of agricultural machines in the deployment of sorghum forage is influenced by the sowing speed and the soil tillage system used. Chisel plow was the equipment that required the highest mean traction force, mean traction and slip, as well as the lowest mean speed for the studied tillage system. Forage sorghum showed higher yields in no-tillage systems at a seeding speed of 5 km h(-1).

Coberturas vegetais, manejo do solo e doses de nitrogênio em cobertura na cultura do milho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade do milho em condições de diferentes manejos do solo e de doses de nitrogênio

Research has been conducted to identify the best nitrogen (N) rate for maize in most diverse types of soil management. However, there is no agreement on the results, once the dynamic of N is influenced by soil management and cover crops. This study evaluated dry mass production and nutrient uptake by cover crops, agronomic parameters and grain yield of maize in response to soil management and N rates. Field trials were carried out in Selvíria, Mato Grosso do Sul State, Brazil, in the growing seasons of 2009/2010 and 2010/2011, on a clayey Rhodic Haplustox (20º 20' S and 51º 24' W, 340 m asl). Thirty-six treatments were established with four replications, in a randomized blocks design, with the combination of cover crops (millet, Crotalaria juncea and millet + Crotalaria juncea), soil management systems (tillage with chisel plow + lightweight disking, heavy disking + lightweight disking, and no-tillage) and topdressing N rates (0, 60, 90 e 120 kg ha-1 - urea as source). Maize hybrid DKB 350 YG® was used and N applied at stage V5 (fifth expanded leaf). A linear increase with the increase of N rates was observed for chlorophyll leaf index, leaf N content, ear length and diameter, and grain weight and yield. Previously grown sunn hemp and millet + sunn hemp grown, associated with 120 kg ha-1 N for maize, induced a higher grain yield after two growing seasons.

Coberturas vegetais, manejo do solo, doses de nitrogênio e seus efeitos na nutrição mineral e nos atributos agronômicos do milho

Research has investigated the best nitrogen rate for maize under the most diverse types of soil management. The aim of this study was to evaluate the influence of cover crops, soil management and topdressed N rates on the dry matter production, nutritional status, plant lodging, plant height and first-ear insertion of maize. Field experiments were carried out in Selvíria, Mato Grosso do Sul State, Brazil, in the growing seasons of 2009/2010 and 2010/2011, on a clayey Rhodic Haplustox (20º 20' S and 51º 24' W, at 340 m asl). Thirty-six treatments were established with four replications, in a randomized blocks design, to test combinations of cover crops (millet, Crotalaria juncea and millet + Crotalaria juncea), soil management (tillage with chisel plow + lightweight disking, heavy disking + lightweight disking, and no-tillage system) and N rates (0, 60, 90 e 120 kg ha-1 - urea as source). The maize hybrid DKB 350 YG® was used and topdressing N applied at stage V5 (fifth expanded leaf). Previously grown sunn hemp and millet + sunn hemp resulted in a higher shoot dry matter, P leaf content and total N, P and K uptake. In the no-tillage system, the initial and final population and shoot dry were highest, and first-ear insertion and plant height lower. The application of 120 kg ha-1 topdressed N increased the P leaf content, N and P in the entire plant, shoot dry matter, total N, P and K uptake, plant height, and the first-ear insertion of maize.

Análise econômica do milho em sucessão a diferentes adubos verdes, manejos do solo e doses de nitrogênio

Technologies that increase crop yields are possible when providing profitability to the producer. The objective of this study was to evaluate production costs and profitability of maize in production systems in Cerrado. The study was conducted in Selviria (Mato Grosso do Sul State), Brazil, in the years 2009/10 and 2010/11. The experiment was arranged in randomized blocks with four replications in factorial and mixed with tracks. We established 36 treatments, three green manures (Pennisetum glaucum, Crotalaria juncea and intercropping Pennisetum glaucum + Crotalaria juncea), three soil management practices (no-tillage system, "heavy disking" + "levelling disking" and "chisel plow" + "levelling disking") and four doses of N (0, 60, 90 and 120 kg ha(-1)). For economic analysis were estimated operational cost, the gross revenue obtained by the product of the productivity of the treatments and the value of corn (R$ 0,417 kg or R$ 25,00 sc(-1)) and the ratio revenue / cost of treatment. Whereas higher values (revenue/cost > 1) and lower (revenue/cost ratio < 1) as a parameter in the analysis of profitability, it can be concluded that corn under no-tillage had the highest profitability in succession to Pennisetum glaucum growing profitability with increasing N rates, in succession to Crotalaria juncea and in the absence of nitrogen application on the coverage achieved higher profitability compared to other treatments and in succession to the consortium Pennisetum glaucum + Crotalaria juncea doses of N was between 50 and 55 kg ha(-1) offer greater profitability to the cultivation of corn.

No-tillage, Strip Tillage, Chisel Plow Tillage Trial

Farmers in central and north central Iowa are often criticized for low adoption of no-tillage. No-tillage is often faulted with cooler, wetter soils and subsequently reduced yields. An alternative to conventional tillage and no-tillage systems is strip tillage where the benefits of both may be combined.

Placement Methods of Phosphorus and Potassium for Corn and Soybean Managed with No-till and Chisel-plow/Disk Tillage

No-till management limits the incorporation of crop residue and fertilizer with soil resulting in wetter, colder soils and the accumulation of organic matter, phosphorus (P), and potassium (K) near the soil surface. Banding of P and K could be more effective than broadcast fertilization by counteracting stratification, applying nutrients in the root zone (starter effect), and minimizing reactions with the soil that may reduce their availability to plants. Therefore, this long-term study was established in 1994 to evaluate P and K fertilizer placement methods and grain yield of corn-soybean rotations managed with notill and chisel-plow/disk tillage.

Soil organic carbon and fertility interactions affected by a tillage chronosequence in a Brazilian Oxisol

No-till (NT) adoption is an essential tool for development of sustainable agricultural systems, and how NT affects the soil organic C (SOC) dynamics is a key component of these systems. The effect of a plow tillage (PT) and NT age chronosequence on SOC concentration and interactions with soil fertility were assessed in a variable charge Oxisol, located in the South Center quadrant of Parana State, Brazil (50 degrees 23`W and 24 degrees 36`S). The chronosequence consisted of the following six sites: (i) native field (NF); (ii) PT of the native field (PNF-1) involving conversion of natural vegetation to cropland; (iii) NT for 10 years (NT-10); (iv) NT for 20 years (NT-20); (v) NT for 22 years (NT-22); and (vi) conventional tillage for 22 years (CT-22) involving PT with one disking after summer harvest and one after winter harvest to 20 cm depth plus two harrow disking. Soil samples were collected from five depths (0-2.5; 2.5-5; 5-10; 10-20; and 20-40 cm) and SOC, pH (in H(2)O and KCl), Delta pH, potential acidity, exchangeable bases, and cation exchangeable capacity (CEC) were measured. An increase in SOC concentration positively affected the pH, the negative charge and the CEC and negatively impacted potential acidity. Regression analyses indicated a close relationship between the SOC concentration and other parameters measured in this study. The regression fitted between SOC concentration and CEC showed a close relationship. There was an increase in negative charge and CEC with increase in SOC concentration: CEC increased by 0.37 cmol(c) kg(-1) for every g of C kg(-1) soil. The ratio of ECEC:SOC was 0.23 cmol(c) kg(-1) for NF and increased to 0.49 cmol(c) kg(-1) for NT-22. The rates of P and K for 0-10 cm depth increased by 9.66 kg ha(-1) yr(-1) and 17.93 kg ha(-1) yr(-1), respectively, with NF as a base line. The data presented support the conclusion that long-term NT is a useful strategy for improving fertility of soils with variable charge. (C) 2008 Elsevier B.V. All rights reserved.

Dacriocistorrinostomia endoscópica

A dacricistorrinostomia (DCR) endoscópica é uma técnica aceita e bem estabelecida no tratamento de obstruções distais da via lacrimal tornando seu domínio pelos otorrinolaringologistas indispensável. OBJETIVO: O objetivo desse artigo é apresentar a experiência em DCR endoscópica da Divisão de Clínica Otorrinolaringológica do Hospital das Clínicas da USP, comparando com os resultados na literatura. FORMA DE ESTUDO: clínico retrospectivo. MATERIAL E MÉTODO: Foram analisados prontuários de 17 pacientes (17 olhos), submetidos à DCR endoscópica, no período entre abril de 2001 e julho de 2004, na qual foram avaliados com relação a sexo, idade, etiologia, quadro clínico, técnica cirúrgica utilizada, uso de sonda de silicone e tempo de permanência, seguimento e as complicações observadas. RESULTADOS: Oito homens e nove mulheres, com idade variando de 29 a 79 (média: 42,64 13,1) apresentaram um seguimento médio de 15 meses. A causa principal da obstrução foi idiopática (58,8%). A epífora foi a queixa predominante. Em 6 pacientes utilizamos instrumentos motorizados, em um caso utilizamos o Laser Yag e no restante, chisel e martelo. Em todos os casos utilizamos sondas de silicone, por período médio de 7,9 semanas e o sucesso da técnica endonasal foi de 82,3%. CONCLUSÃO: A técnica endoscópica se mostrou uma técnica segura, com uma série de vantagens em relação à técnica externa e, desta forma, oftalmologistas e otorrinolaringologistas devem trabalhar em harmonia para oferecer maiores benefícios aos seus pacientes.

Drilling of fibre reinforced plastic laminates

The use of fibre reinforced plastics – FRP’s – in structures is under a considerable increase. Advantages of their use are related with their low weight, high strength and stiffness. The improvement of the dynamic characteristics has been profitable for aeronautics, automobile, railway, naval and sporting goods industries. Drilling is a widely used machining technique as it is needed to assemble parts in a structure. This is a unique machining process, characterized by the existence of two different mechanisms: extrusion by the drill chisel edge and cutting by the rotating cutting lips. Drilling raises particular problems that can reduce mechanical and fatigue strength of the parts. In this work, quasi-isotropic hybrid laminates with 25% of carbon fibre reinforced plies and 4 mm thickness are produced, tested and drilled. Three different drill geometries are compared. Results considered are the interlaminar fracture toughness in Mode I – GIc –, thrust force during drilling and delamination extent after drilling. A bearing test is performed to evaluate tool influence on the load carrying capacity of the plate. Results consider the influence of drill geometry on delamination. A correlation linking plate damage to bearing test results is presented.